Import of Table data only from Full export Dump

I want to import data inot specified tables of a databse only. Is it possible to do this from a dump file which is the full export of the another database. The database i want to import into is the mirror of the database whose export dump i want to use. Let me know if this is possible and if yes then how i could do this.
Thanking in advance.

Please check the following link for full instructions:
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/part1.htm#435787
If on another release, the same documentation is available for it on OTN as well.
Thanks!

Similar Messages

Export & Import internal table data across the programs

Hi All,
I have two different reports,let say ZPRO1 & ZPRO2. I want to export internal table data of ZPRO1 to ZPRO2 and then I want to do some calculations in ZPRO2 with the imported internal table data(ZPRO1).
If I use 'SUBMIT' or CALL TRANSACTION syntax ZPRO1 is displaying..but I want to use only internal table data of ZPRO1.
Pls advise.
Pranitha.

Hi,
Please follow the simple code and try to solve your issue.
Code in program1
types: begin of ty_itab,
       matnr type matnr,
       end of ty_itab.
data: it_itab type table of ty_itab,
      wa_itab type ty_itab,
      it_itab1 type table of ty_itab.
select matnr from mara into table it_itab.
export it_itab to shared buffer indx(st) id 'ABC'.
Code in program2
types: begin of ty_itab,
       matnr type matnr,
       end of ty_itab.
data: it_itab type table of ty_itab,
      wa_itab type ty_itab.
import it_itab from shared buffer indx(st) id 'ABC'.
loop at it_itab into wa_itab.
write:/ wa_itab-matnr.
endloop.
Please delete shared buffer indx(st) id 'ABC', once we don't need the internal table data.
Regards
Dande

Export and import a table data

Hi All,
There is table abc which is having appprox 40lak records without partitions(and have dmp of this data). Due to space constraints I want to compress the data and put it in archive schema.
My question is:
1) Can we import the data into other schema(say: archive schema) in compressed mode. If so could you please let me know the syntax for that.
2) Can we import the data into some temporary table(say: temp) in same schema?
3) And if any blob column exists in table then can we import the data without this blob column data.(Supposing the export dump has the blob data).
Is it possible, or whould we export without this blob column and import this to other table?
Please help me out.
Edited by: user11942774 on 4 Dec, 2011 10:33 PM

Thanks Mahir,
Could you please let me know the syntax or with any examples if possible.
is it possible to drop any column say blob column after the table is in compressed mode?
Edited by: user11942774 on 4 Dec, 2011 10:53 PM
Edited by: user11942774 on 4 Dec, 2011 10:54 PM

Issue Migrating Character Data Using a Full Export and Import

Hi There;
I have a database in my local machine that doesn't support Turkish characters. My NLS_CHARACTERSET is WE8ISO8859P1, It must be changed to WE8ISO8859P9 , since it supports full Turkish characters. I would like to migrate character data using a full export and import and my strategy is as follows:
1- create a full export to a location in network,
2- create a new database in local machine that it's NLS_CHARACTERSET is WE8ISO8859P9 (I would like to change NLS_LANGUAGE and NLS_TERRITORY by the way)
3- and implement full import to newly created database.
I 've implemented first step, but I couldn't implement the second step. I 've created the second step by using toad editor by clicking Create -> New Database but I can not connect the new database. I must connect new database in order to perform full import. How can I do this?
Thanks in advance.
Technical Details
NLS_LANGUAGE.....................AMERICAN
NLS_TERRITORY.....................AMERICA
NLS_CURRENCY.....................$
NLS_ISO_CURRENCY..............AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET.............WE8ISO8859P1
NLS_CALENDAR.....................GREGORIAN
NLS_DATE_FORMAT................DD-MON-RR
NLS_DATE_LANGUAGE...........AMERICAN
NLS_SORT...............................BINARY
NLS_TIME_FORMAT.................HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT......DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT............HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT..DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY............ $
NLS_COMP...............................BINARY
NLS_LENGTH_SEMANTICS.......BYTE
NLS_NCHAR_CONV_EXCP........FALSE
NLS_NCHAR_CHARACTERSET...AL16UTF16
NLS_RDBMS_VERSION............10.2.0.1.0

First, if your applications run on Windows, do not use WE8ISO8859P9. Use TR8MSWIN1254.
Second, if you create a new database, the database is not necessarily immediately accessible to outer world. I do not know Toad and I have no idea if it performs all necessary steps required for the new database to be visible. For example, in the Toad itself, I assume you should create a new connection that references the new SID of the newly created database and use this new connection to connect. However, connections without a connection string use the ORACLE_SID setting in Registry to tell connecting applications which instance (database) to use. To change the database accessed with an empty connection string you need to modify Registry (unless Toad has an option to do this for you). If you want to connect without changing Registry, you need a connect string. This requires setting up Oracle Listener to serve the new database (unless default configuration is used and the database registers itself with the default listener). It also requires changing tnsnames.ora file to create an alias for the new database. Net Manager and/or Net Configuration Assistant can help you with this.
I wonder if Database Configuration Assistant would not be a better tool to create new Oracle databases.
Thanks,
Sergiusz

Importing single row from an exported dump of many tables

Hi all,
I have a requirement to import a single row from a exported dump which has collection of tables in it.
i have used export of a single row and import of single row(from single row export dump), now i need to import a single row from a dump containing collection of tables...
kindly help me out with this.

971424 wrote:
Hi all,
I have a requirement to import a single row from a exported dump which has collection of tables in it.
i have used export of a single row and import of single row(from single row export dump), now i need to import a single row from a dump containing collection of tables...
kindly help me out with this.post command line that produced the dump file.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Loading data only from access

Hi,
I just want to load data only from MS Access tables to oracle tables.I already have oracle tables. Can i do this with Oracle Migration workbench.
Thanks

Hi,
The Oracle Migration Workbench can be used to migrate table data from your MS Access to your migrated Oracle database schema. The data can be transferred either online, using the Migration Wizard of the workbench or offline using SQL*Loader scripts generated by the workbench, to copy data from the source database to your destination Oracle database.
You mention that you already have the Oracle tables. Did you use the migration workbench to migrate your Access MDB file to Oracle?
If so, then you can do the following to load your data into the Oracle database using the offline capture method:
1. Use the Exporter for MS Access tool (omwb<version>.mde) to extract the data from your Access MDB file. This generates .DAT files containing the table data.
2. Launch the workbench, pointing to the repository containing the source and oracle model information for your Access MDB file. This will be the repository you used during the initial migration of your Access database to Oracle.
3. Select the Oracle Model tab, then select a user schema in the Oracle Model that you want to migrate the data to.
4. Select the associated "Tables" node of the tree.
5. From the "Objects" menu, select the "Generate SQL*Loader Scripts.
6. Use the generated SQL*Loader scripts to load the Access data, contained in the .DAT files generated in step 1 above, into the Oracle database.
For further information on the steps outlined above, please refer to Chapter 6 Migration the Database of the Oracle Migration Workbench User's Guide, specifically
section "Transferring the Data Offline". The User's Guide can be obtained in the /omwb/docs/usersguide folder of your omwb installation, or via the Help | User's Guide of the workbench.
I hope this helps.
Regards,
Hilary

IMPORT a VIEW from an export dump file

I'm trying to import a view from an export dump file. In using the Import Utility, do I use the TABLE parameter and give the View name ie: TABLES=view1
null

Only I want to do is import ONE view from an export dmp file that contains hundereds of table, many views and procedures. I do not want to reimport everything from the export file.

Import few schemas out of a full DB dump file into a new DB

Hi,
I have a 11g database, ORCL.
I have created a new database, TEST, where i want only 3 schemas of ORCL database to be imported.
I have taken an export dump file of the 3 schemas (A,B and C), with which the below import command works:
impdp system/xxxx directory=EXPDP dumpfile=schema3.dmp logfile=schema3.log REMAP_TABLESPACE=A_TBS:USERS,B_TBS:USERS,C_TBS:USERS
where A_TBS, B_TBS and C_TBS are the tablespaces of the respective schemas A,B and C in ORCL database
USERS is the default tablespace in the TEST database
But If I take a full export dump of the entire database and want to import only the 3 required schemas, then is the below command correct???
impdp system/xxxx directory=EXPDP dumpfile=full_dump.dmp logfile=full_dump.log SCHEMAS=A,B,C REMAP_TABLESPACE=A_TBS:USERS,B_TBS:USERS,C_TBS:USERS
Please guide.
Thanks in Advance.

If you do a FULL export and FULL import, the import also attempts to create Tablespaces that do not exist. However, it will attempt to create the tablespaces with the same file names (including directory paths) as present on the source database. That is why it is always preferable to precreate Tablespaces at the new database before running the import -- so that you can control the sizes and names of datafiles, even change tablespace parameters if necessary. REMAP would be used if you want to import to different tablespace names. When precreating tablespaces, the size required really depends on the size of the data.
At the source you might have a tablespace with datafiles adding up to 5GB but used segments of 3GB only (Again, within the 3GB, 80% of the data might have been deleted before the export !). So the size required at the new database might be 3GB or only 600MB !! It is best to precreate a few datafiles with some reasonable sizes and have them with AUTOEXTEND ON so that the tablespaces grow to the actual size that is really required.
Hemant K Chitale

How-to Generate Script from the export dump file

Hi all,
Software : Oracle 10gR2/Windows 2003
=============================
Has anyone generated a Script from a export dump file ( exported via data pump export). I know it is possible to generate script from the regular export.
I want to know how to generate the script for various objects or is it possible to get the counts of types of objects in the dump file and / or generate the script from the export dump file exported via data pump utility on Oracle 10g.
Thanks,
SS

I want to know how to generate the script for various objects.what do you mean by scripts? Assuming the metadata definitions of various objects.
First of all, you can generate the metadata definitions using import.
Use, Impdp with SQLFILE parameter to generate the SQL file for the metadata definitions.
Refer to
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm

Importing only tables from full export

hi,
our database is going to get live..
Oracle 10GR2
Windows 2003.
i have full expdp dump file...
i just want to import only tables from that dumpfile..
how can i do that..
there are around 1059 tables...
searched over the net but did not find anythiing..
your help is needed....
thank you ..
wating for your

thnks for the replay..
the schema is different in which the tables needs to be imported.
but this schema in which tables needs to b imported contains the same number of tables with same strutures.
thanks.

To export and import oracle 11g table data only

Hi Gurus,
Just not sure of the procedure to follow in the export just the table data and then truncate the table do some changes(not table structure changes ) and then import the same table data in to the relevent table .
Could some please help me in the setps involved in it .
Thanks a Lot in advance

If you can use Data Pump, here are your commands:
expdp table_owner/password directory=<your_directory> dumpfile=table_name.dmp tables=table_name content=data_only
impdp table_owner/password directory=<your_directory> dumpfile=table_name.dmp tables=table_name table_exists_action=append
Data Pump requires version 10.1 or later.
Dean

Importing a user table from full export

if i prefer full exoprt with the command given below
exp "'/ as sysdba'" file=aaa.dmp full=y compress=y log=aaa.log
how can i import a table T under a given user schema U?

use parameters
- fromuser=U, touser=<yourschema> to indicate the schema
- tables=T

Imp table from full export

TABLE NAME = CM_BEN
DB version = Oracle 9i ( 9.2.0.8 )
C:\oracle9i\ora92\bin\imp system/****@connstrng file=Jun17.dmp log=Jun17_imp.log fromuser=sa touser=sa tables=cm_beneficiaries_bk
note:- 'cm_beneficiaries_bk' IS NEW TABLE STRUCTURE CREATED SAME AS 'CM_BEN'
How do i imp table (cm_ben) from full exp Jun17.dmp?
When i use the above command, following are the details.
========================================================================
Import: Release 9.2.0.8.0 - Production on Sun Jun 19 12:32:32 2011
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining op
tions
JServer Release 9.2.0.8.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
import done in AR8ISO8859P6 character set and AL16UTF16 NCHAR character set
. importing SA's objects into SA
C:\>
C:\>
======================================================================================
Also, wen i open log file, it is blank. Kindly help me to solve the issue.
Thank you,

I need to imp table CM_BEN from yesterdays EXP, for that i had created temp table structure same as CM_BEN i.e; cm_beneficiaries_bk and used the command
C:\oracle9i\ora92\bin\imp system/****@connstrng file=Jun17.dmp log=Jun17_imp.log fromuser=sa touser=sa tables=cm_beneficiaries_bk
Also
C:\oracle9i\ora92\bin\imp system/****@connstrng file=Jun17.dmp log=Jun17_imp.log fromuser=sa touser=sa tables=cm_beneficiaries_bk ignore=yif this dump is DATA PUMP, then you can use REMAP_TABLE.
Instead of that import the table CM_BENEFICIARIES_BK, then create a new table "CM_BEN" form "CM_BENEFICIARIES_BK" as
create table CM_BEN as select from CM_BENEFICIARIES_BK;*

Export table data only

Hi Gurus,
I am wondering if anyone can offer some advice in regards to export table data from a source and import it to another system.
We have a development environment (say, Banner_dev) and a production one (say, Banner_Prod). We routinely perform database refresh from Banner_Prod to Banner_dev, using Oracle Rman cloning. However, the developers are not happy with this approach saying that other things (such as packages, functions, procedures) get overwritten.
We (DBAs) have been asked to see if we can use export/import approach so that only data within a schema will be exported and imported, leaving other objects untouched in Banner_Dev when we refresh the database from Banner_Prod to Banner_Dev.
Is this doable with Oracle Data Pump? If it is, how can we accomplish this?
Thanks!

You might consider a layered, scripted approach that takes into account the differences between the production and development environments. You might want to take into account things like differences between table DDL, data upgrading, coordinating code and so forth. The ideal is to be able to say "hey everybody, we're going to push this button tonight, be sure your work is saved into this system that will refresh everything."
Of course, I'm used to doing this with exp/imp because of various app and dba requirements (like, I really don't want to use the same schema name between dev and prod) and the scripts have been refined over time, but there isn't any reason you couldn't have a general post-clone procedure. Describe it in terms that developers see as beneficial to them.

How to Export/Import HANA table data.

Hello,
I try EXPORT HANA table.
I try to export a table by using the HANA Studio on the client PC.
but does not work.
the following steps:
HANA Studio
<table> > Export > Select tables for export > Next >
Error message : "Choose a location"
There is the question
Export possible? HANA database table by using client PC(HANA Studio).
Best regards,
Hosoya

Hi Hosoya,
Which version of the HANA server/studio you are using? I checked in Revision 24 and was able to do the table export as follows:
Quick Launch>Export>SAP HANA Studio>Tables>'Select the server'>'Select the table'>Export table options
In Export Table options screen we can specify either the Server Location as 'Export Tables on Server' or to the client location
as 'Export tables to current client'
Note: The server and studio I use are on different servers.
Regards, Rahul

Import of Table data only from Full export Dump

Similar Messages

Maybe you are looking for