Export error from Rep. Object Navigator

Hi
I got an error CDI-22582 when I tried to export container or workarea from Rep. Object Navigator. Errlog.err file contains this:
EXP-00056: ORACLE error 12154 encountered
ORA-12154: TNS:could not resolve service name
EXP-00000: Export terminated unsuccessfully
Everything is OK with my TNS. I can successfully connect to Rep. DB from Designer or Enterprise Manager. I'm using:
Designer6i v. 6.5.40.20.0 c.4.012
Thanks.

Nenad,
There are various causes to this issue. The most common one is the following:
When you connect to your repository, you use the TNSNAMES.ORA from the Designer Oracle Home.
When you export from Designer, it can be (depending on the registry variables EXECUTE_EXPORT) that you use the export executable from another Oracle Home, what means it uses a different TNSNAMES.ORA
Could you please check if it's the case?
If it is, make the file tnsnames.ora in both Oracle Homes identical.
If you have access to MetaLink, I would recommend you to have a look to Note 160378.1: Common causes of CDI-22582 during export/import in Designer 6i and 9i
Hope this helps,
Didier.

Similar Messages

Workarea Wizard in Rep Object Navigator is greyed out ???

Please help,
I have to configure a working area for a new
Project and even if I use the REPOSITORY OWNER
the Workarea Wizard on the menu TOOLS in the
Object Navigator is GREYED OUT .
What should I do ?
Please respond .
Regards,

Thank you Vishal, I figured it was going to be something like that.
Regards,
Christian Reguerin
[ UroboroS ]
[email protected]

Lightroom - Export error from Admin account

Lion 10.7.4 MacPro - I cannot export from Lightroom 4 in my main Admin account. Lightroom gives me an error message - When I create a new admin account I can export from LR4. It also works on my two laptops. Spent much time with Adobe and it was determined that it was an Apple issue. Can anyone help?
Thanks,
JT

There's one thing you could try that might or might not have an effect. If it doesn't, I have no other suggestions.
Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Export error from enterprise manager

Im getting this error when trying to do a table export from enterprise manager(oracle 10g statndard edition). There is a problem writing to the export files: ORA-39094: Parallel execution not supported in this database edition. I looked on line and places said to have parallelism to 1 but i think i already have that set.
Export Type Tables
Statistics type Estimate optimizer statistics when data is imported
Parallelism 1
Files to Export WRITABLE_DIRECTORY tables.DMP
Log File WRITABLE_DIRECTORY EXPDAT.LOG

Its trying to create a dump file, but file by that name already exists. Verify that name & path is correct.

Export error from sqlplus 10.2.0.1.0

I'm trying to export using 10g exp utility into a 9i database but i have problems.
my command is:
exp userid=system/password file=/backup/my_exp_db.dmp log=/backup/my_exp_db.log full=yThe error is:
Export: Release 10.2.0.1.0 - Production on Mar Abr 20 10:52:52 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfullyhow can i resolve this issue?

guif wrote:
I'm trying to export using 10g exp utility into a 9i database but i have problems.http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1013164
The version of the Export utility must be equal to the earliest version of the source or target database.
For example, to create an export file for an import into a later release database, use a version of the Export utility that is equal to the source database. Conversely, to create an export file for an import into an earlier release database, use a version of the Export utility that is equal to the version of the target database.>
how can i resolve this issue?Use the Exp version that came with the 9i database version.

FDMEE Export Errors

Does anyone know how you can get a data dump of export errors from FDMEE aside from what is shown in the log within Process Details?
That log only appears to show the first 101 errors.

You can look at the physical log on the file system.
If you click on "Process Details", it will show you the path to the log file at the top.

When exporting data from FDM to HFM getting error - Error: Adapter function [fConnect] failed

Hi ALL!!!
I am trying to Export Data from FDM to HFM and clicked "Export" option and getting below error.
Error: Adapter function [fConnect] failed.
Detail: Stacktrace:
upsWBlockProcessorDM.clsBlockProcessorClass.ActLoad(strLoc[String], strCat[String], strStartPer[String], strEndPer[String], strFile[String], objLoadParam[Object&], blnNoRaiseEvents[Boolean], lngMarshalType[Int32])
Hyperion.FDM.Dialogs.TargetSystemLoadDialog.buttonOK_ServerClick(sender[Object], e[EventArgs])
And followed the John suggestions through this Link (http://epm.jonhwilliams.com/adapter-function-fconnect-failed-fd/), All the checks are good, But still issue has not been resolved.
Could some one please suggest your valuable inputs.
Thanks,
RSV

Can you check if the integration options "Use SSO" and "Enable Sticky Server" are set to on?

ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD

Hi DBA's
I am getting the following error after cloning.
But Cloning done successfully.
When I run the application environment and services to start or stop i am getting the following error.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib/libInternalSymbols.so' from LD_PRELOAD cannot be preloaded: ignored.
Thanks,
SG

Hi Sawwan,
What value should i give for LD_PRELOAD ? can you please tell me and I set the environment in .bash_profile as bellow.
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
#export PATH
unset USERNAME
export LD_ASSUME_KERNEL=2.4.19
export ORACLE_BASE=/s03/CLN
export ORACLE_SID=CLN
export ORACLE_TERM=xterm
export NLS_LANG=AMERICAN
export ORACLE_HOME=$ORACLE_BASE/clndb/10.2.4
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$ORACLE_HOME/bin
export ORA_NLS10=$ORACLE_HOME/nls/data/9idata
Thanks
SG

ERROR: ld.so: object '/lib/libcwait.so' from LD_PRELOAD cannot be preloaded

Hi Friends,
i am using Linux X86-64 bit OS and i have 9.2.0.5 ebiz (32 bit)database
Now i installed 9.2.0.8 (64 bit) in new home and migrated and upgraded the 32 bit database to 64 bit as well the version from 9.2.0.5 to 9.2.0.8
when i start the application Tier services (11i)
I am getting the following error
ERROR: ld.so: object '/lib/libcwait.so' from LD_PRELOAD cannot be preloaded: ignored.
please suggest the Fix.
Regards,
DB

Hi,
Please check the location of libcwait.so file and add that path in the .profile file of application OS user as follows:
LD_PRELOAD=/usr/lib/libcwait.so; export LD_PRELOAD
andre-login and re-test the issue
refrence [ID 371344.1]
-RK

Error while migrating object from PI 7.0 to pi 7.1

Hi All,
I am migrating IR and ID object from PI 7.0 to PI 7.1 using file system.
IR oject got imported sucessfully in ESR but ID after importing when i tried to activate the objects in change list i am facing the following error. Does anyone have any idea about the error.
Internal error while checking object Communication Channel: | XIXREF_C | File_FileXref_Sender_XrefFlat_CC; see details++
Attempt to access the 1 requested objects on 1 failed
Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException:
Attempt to read object Adapter Metadata File | http://sap.com/xi/XI/System,
type AdapterMetaData from application REPOSITORY on++
system REPOSITORY failed. Object does not exist. Detailed
informatio n: Software component version with key ID:
b38bcd00e47111d7afacde420a1145a5 not found (ROA_MOA_NOTCOMPLETED)
Thanks
Kasturika Phukan

Hi Kasturika,
Check whether the metadata for the particular adapter in the BASIS SWCV exists or not.
I hope you are refering to the following guide while transferring from PI 7.0 to PI 7.1
[Move Scenarios from 7.0 to 7.1|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90baf3dd-dbf9-2b10-47aa-ac5f56bb5030]
Regards,
Gautam Purohit

Error while exporting data from 9i

When we try to export data from 9i db getting below error.
Db version : Oracle 9i Enterprise Edition Release 9.2.0.5.0-64 bit
cmd : exp user/pwd@db file=test_dmp.dmp tables=state
Export utility: Release 11.1.0.6.0
Error:
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfully

Hi,
You must export with the 9i version of exp, and import in the 11g database (if that's what you want) with 11g imp.
Regards,
Mario Alcaide

Error while exporting data from sql server to excel

Hi,
I am trying to export data from sql server to excel.
The query that I used is s follows
INSERT INTO OPENROWSET( 'Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:\Folder1\abc.xls','select * from [Sheet1$A1:IV65000]')
select
column1,column2.... from Table1
I get the following error message while doing so..
String or binary data would be truncated.
The statement has been terminated.
One of the column's holds data more than 225 characters.
What is the way to correct this, i want the whole data of the colum in the excel sheet.

I haven't had great luck with the INSERT INTO OPENROWSET method. Can you try one of the many samples from one of these 3 links?
http://www.excel-sql-server.com/excel-sql-server-import-export-using-vba.htm#Excel%20Data%20Export%20to%20SQL%20Server%20Test%20Code
http://www.mssqltips.com/sqlservertip/1540/insert-update-or-delete-data-in-sql-server-from-excel/
https://www.simple-talk.com/sql/database-administration/getting-data-between-excel-and-sql-server-using-odbc--/
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Error while updating data from DataStore object

Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

Hi Vijay,
I got this error:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
      For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
      end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
      under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
      been logged for this process.
System Response
      No log has been written. The process (and consequently the chain)
      has been terminated.
Procedure
      If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?

FIM MA Export errors. There is an error executing a web service object creation.

While checking for the permission, we have figured that the Built-In Synchronization account is being deleted by an Expiration Workflow.
FIM MA Export errors. There is an error executing a web service object creation.
While checking for the permission, we have figured that the Built-in Synchronization account was deleted by an Expiration Workflow
Is there a way to restore. Thanks.

I would re-run FIM setup - I think it can re-create this account
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Error on activation of data records from ODS object

hi,
Kindly help with my BW Problem, the error occured on the
activation of ODS. The error says "Request
REQU_43MNOPW29W4F5M037J7OAFP52 in ODS ZPUR_O01 must have QM
status green before it is activated" and "Activation of data
records from ODS object ZPUR_O01 terminated"
I tried to check the data in the ODS Object by choosing
<LS>Administrator Workbench > data targets > context menu on ODS
Object ZPUR_O01 but the status are green and when i tried to
activate it the logs says "ODS object ZPUR_O01 was built
incorrectly. Cannot update request
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
Data to be activated successfully checked against archiving
objects
Activation of data records from ODS object ZPUR_O01 terminated"
Please help me with this problem.

Hi Jay
U need to update these requests to ODS
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
1) delete the current request
2)Reconstruct the requests above three request
3)and then Load the current reqest (REQU_43MNOPW29W4F5M037J7OAFP52)
Then only u will be able to activate the ODS....
This is an serialization issue...
hope it helps
regrds
AK
assign points if usefull

Export error from Rep. Object Navigator

Similar Messages

Maybe you are looking for