Lightroom - Export error from Admin account

Lion 10.7.4 MacPro - I cannot export from Lightroom 4 in my main Admin account. Lightroom gives me an error message - When I create a new admin account I can export from LR4. It also works on my two laptops. Spent much time with Adobe and it was determined that it was an Apple issue. Can anyone help?
Thanks,
JT

There's one thing you could try that might or might not have an effect. If it doesn't, I have no other suggestions.
Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Similar Messages

Encounter "500 Unexpected Error" when admin account access to ECP

Symptom：
In Exchange 2013, when using admin account to access ECP, you will get an error “500 Unexpected” as below. However, when using the same account to access OWA, everything is ok, and other normal accounts can access OWA also.
At the same time, if you check the event log, you will get the following error:
Current users: “yourdomain.com/User/admin”Request for URL 'https://servername.yourdomain.com:444/ecp/default.aspx(https://servername/ecp/)' failed with the following error: System.Configuration.ConfigurationErrorsException: “
” (hexadecimal value 0x03)is an invalid character. Line 1, position 1 (C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp\quarantine\web.config line 1) ---> System.Xml.XmlException: “
” (hexadecimal value 0x03)is an invalid character. Line 1, position 1     System.Xml.XmlTextReaderImpl.Throw(String res, String[] args)     System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
System.Xml.XmlTextReaderImpl.ParseDocumentContent()     System.Configuration.XmlUtil..ctor(Stream stream, String name, Boolean readToFirstElement, ConfigurationSchemaErrors schemaErrors)     System.Configuration.BaseConfigurationRecord.InitConfigFromFile()
Cause：
According to the error information, there are some invalid characters in the file (C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp\quarantine\web.config ).
In Exchange Mailbox server, when we open this file with notepad, we will find that all the content are garbled. That is the cause.
Solution:
1. Try to copy the following code to replace the contents of the file, and save it.
2. Restart mailbox server.
<?xml version="1.0"?>
<configuration>
<location path="Quarantine.slab">
    <system.web>
      <authorization>
        <allow roles="Get-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
<location path="EditQuarantineAdvFilter.aspx">
    <system.web>
      <authorization>
        <allow roles="Get-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
<location path="QuarantineDetails.aspx">
    <system.web>
      <authorization>
        <allow roles="Get-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
<location path="QuarantineSDO.aspx">
    <system.web>
      <authorization>
        <allow roles="Get-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
<location path="ReleaseQuarantine.aspx">
    <system.web>
      <authorization>
        <allow roles="Release-QuarantineMessage@R:Organization"/>
        
        <deny users="*"/>
      </authorization>
    </system.web>
</location>
</configuration>
Reference: https://social.technet.microsoft.com/Forums/zh-CN/74a108a8-21f3-4f5e-8fee-94942698797a/exchange-2013ecp500?forum=exchangeserverzhchs
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
According to your description, I understand that open a shared mailbox and modify the setting of Outlook Voice Access by OWA, then return an error “500 unexpected error”.
If I misunderstand your concern, please do not hesitate to let me know.
Basis on my testing, run Enable-UMMailbox to enable UM feature for shared mailbox, and enable shared mailbox account in AD. Then login OWA to double check the setting of Voice mail, everything is OK.
However, I get the same error as your mentioned when login another account in OWA and open shared mailbox to modify the setting of voice mail. Also, I get same error when doing this way to access another mailbox.
I find an similar thread about your question, it may be caused by the license of shared mailbox. For your reference:
http://community.office365.com/en-us/f/148/t/160652.aspx
Best Regards,
Allen Wang

Transferring files from admin account to standard account w/Filevault on

Hey everybody,
Morning! I want to transfer all of my files from my Admin account to a Standard account for better security but Filevault is activated on both. I saw the post in the Apple Support Community: http://discussions.apple.com/thread/3009375?start=15&tstart=0 ; but I don't know if this will apply to my current situation because Filevault is on. Any help would be aptly thanked my peeps. Peace.

So I tried following the commands in the link and ended up moving my home folder from User 1 to User 2 but now I can change the ownership over to User 2. I trashed the the copied folder from User 1 while in User 2 and it deleted everything on my User 1 account so I had to put it back. PLEASE HELP!!

Export error from Rep. Object Navigator

Hi
I got an error CDI-22582 when I tried to export container or workarea from Rep. Object Navigator. Errlog.err file contains this:
EXP-00056: ORACLE error 12154 encountered
ORA-12154: TNS:could not resolve service name
EXP-00000: Export terminated unsuccessfully
Everything is OK with my TNS. I can successfully connect to Rep. DB from Designer or Enterprise Manager. I'm using:
Designer6i v. 6.5.40.20.0 c.4.012
Thanks.

Nenad,
There are various causes to this issue. The most common one is the following:
When you connect to your repository, you use the TNSNAMES.ORA from the Designer Oracle Home.
When you export from Designer, it can be (depending on the registry variables EXECUTE_EXPORT) that you use the export executable from another Oracle Home, what means it uses a different TNSNAMES.ORA
Could you please check if it's the case?
If it is, make the file tnsnames.ora in both Oracle Homes identical.
If you have access to MetaLink, I would recommend you to have a look to Note 160378.1: Common causes of CDI-22582 during export/import in Designer 6i and 9i
Hope this helps,
Didier.

Export error from enterprise manager

Im getting this error when trying to do a table export from enterprise manager(oracle 10g statndard edition). There is a problem writing to the export files: ORA-39094: Parallel execution not supported in this database edition. I looked on line and places said to have parallelism to 1 but i think i already have that set.
Export Type Tables
Statistics type Estimate optimizer statistics when data is imported
Parallelism 1
Files to Export WRITABLE_DIRECTORY tables.DMP
Log File WRITABLE_DIRECTORY EXPDAT.LOG

Its trying to create a dump file, but file by that name already exists. Verify that name & path is correct.

Export error from sqlplus 10.2.0.1.0

I'm trying to export using 10g exp utility into a 9i database but i have problems.
my command is:
exp userid=system/password file=/backup/my_exp_db.dmp log=/backup/my_exp_db.log full=yThe error is:
Export: Release 10.2.0.1.0 - Production on Mar Abr 20 10:52:52 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfullyhow can i resolve this issue?

guif wrote:
I'm trying to export using 10g exp utility into a 9i database but i have problems.http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1013164
The version of the Export utility must be equal to the earliest version of the source or target database.
For example, to create an export file for an import into a later release database, use a version of the Export utility that is equal to the source database. Conversely, to create an export file for an import into an earlier release database, use a version of the Export utility that is equal to the version of the target database.>
how can i resolve this issue?Use the Exp version that came with the 9i database version.

Setting Default Settings, Programs from Admin Account

So I am new to Macs, this may be a stupid question.
I am the administrator on a new 24" iMac for my work. I am trying to set defaults (backgrounds, docks, desktop items, etc.) for the accounts for my staff. I want to set it up so every new account that I create has the same set of programs on the dock, the same desktop background, same default programs, same programs on-login that sort of thing.
I imagine that this is pretty easy, but I've done some searching and came up blank. Thanks for your help!

Set up an account as desired, and then copy the files from its home folder to the /System/Library/User Template/ folder. This needs to be done as root, and the copies in the template need to be owned by root.
(35679)

HT5500 I can no longer connect to Facebook via Safari, Firefox and Chrome from Admin account, but I can through the Guest account? Any ideas?

For some reason, Facebook is the only site I cannot reach when logged in as Admin. When I switch to Guest then I can access Facebook. I've cleared DNS cache. I've reset Safari, etc. Something is real wierd. Any ideas?

I would try posting this in the right forum your in the ipad forum right now

Read all email from admin account

Hi,
I have a portal page, and I need to put icon in the homepage when the user have email not read.
But my probleme is, is not possible to my to get the user password. So I created a power user to see all email account. I don't find a solution to use it...
So can't you help me please thank
jsgillca

Hi,
the "power user" can see all account in server.
So i need to add icon in web page when user have email not read.
This is my code.
Properties props = System.getProperties();
//props.setProperty();
Session session = Session.getDefaultInstance(props, null);
// -- Get hold of a IMAP message store, and connect to it --
store = session.getStore("imap");
store.connect(host, power_username, power_password);
//I need to change email account read to end_user_1
folder = store.getDefaultFolder();
if (folder == null) throw new Exception("No default folder");
// -- ...and its INBOX --
folder = folder.getFolder("INBOX");
if (folder == null) throw new Exception("No IMAP INBOX");
// -- Open the folder for read only --
folder.open(Folder.READ_ONLY);
int count = folder.getUnreadMessageCount();
So when I log with power_user I can not change email account to end_user so do you have solution for that?
thanks

System PATH environment variable issue when user log off and log in or switch from admin to non-admin account

Hi,
Problem Description:
After installing my new product version, when user does log-off and log in again into admin account
or switch from admin account to non-admin account, PATH environment variable shows incorrect path of my product (previous product version’s path) using command prompt.
It seems windows refresh issue during session changes (log off and log in / switch from Admin to
Non-admin account).
Why PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
Please see my thread for more details http://social.msdn.microsoft.com/Forums/vstudio/en-US/445ab42c-bdff-405a-8d53-558e1b6c7d34/path-environment-variable-issue-when-user-logoff-and-login-or-switch-from-admin-to-nonadmin?forum=windowsgeneraldevelopmentissues
Also submitted bug for this in connect.microsoft.com portal.In that it has lots of information
like problem statement, Reproduction steps and Expected Results.
Bug ID: 871782
Could you please any body help me for this?. your support will be appreciated.
Thanks,
Marichamy

Why PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
I wouldn't have any expectation of what you are doing to work the way you expect. E.g. why is the %ABC% being replaced at all? There is some help about this ambiguous scenario in the cmd help...
/V:ON Enable delayed environment variable expansion using ! as the
delimiter. For example, /V:ON would allow !var! to expand the
variable var at execution time. The var syntax expands variables
at input time, which is quite a different thing when inside of a FOR
loop.
/V:OFF Disable delayed environment expansion.
So, what's the setting for the /V: switch that your users would be using? Perhaps you should be using the ! instead of the % for your ABC variable?
Oh. There's more below where I found that...
Delayed environment variable expansion is NOT enabled by default. You
can enable or disable delayed environment variable expansion for a
particular invocation of CMD.EXE with the /V:ON or /V:OFF switch. You
can enable or disable delayed expansion for all invocations of CMD.EXE on a
machine and/or user logon session by setting either or both of the
following REG_DWORD values in the registry using REGEDIT.EXE:
HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\DelayedExpansion
and/or
HKEY_CURRENT_USER\Software\Microsoft\Command Processor\DelayedExpansion
to either 0x1 or 0x0. The user specific setting takes precedence over
the machine setting. The command line switches take precedence over the
registry settings.
In a batch file the SETLOCAL ENABLEDELAYEDEXPANSION or DISABLEDELAYEDEXPANSION
arguments takes precedence over the /V:ON or /V:OFF switch. See SETLOCAL /?
for details.
If delayed environment variable expansion is enabled, then the exclamation
character can be used to substitute the value of an environment variable
at execution time.
So, I guess the essence of your "bug" will boil down to whether you
need the feature to get the result you want and the
truth of that first sentence but it certainly looks like a "can of worms" to me. ; )
HTH
Robert Aldwinckle

Installing Elements 6 (non Admin account)

I have been reading the posts in the forum regarding Elements as this is software which I am considering for purchase with Barbara Brundage's book. I have recently switched to a mac which I love and don't want to introduce problems which I might be able to avoid by asking first. Permissions etc are new to me as my experience with Windows was just to run as Admin something I don't want to do in Leopard.
I posted in one thread http://discussions.apple.com/thread.jspa?messageID=8912633#8912633
My initial concerns came from user reviews about the actual install which has now had more light shed on it as I run as a Standard user on my Mac. I have an Admin account created n day one but only use this to do my updates and install iWorks plus the new iLife when it arrives. Day to day I am a standard user but after reading the post I have linked I am now unsure if I could use Elements as a standard user even if I did the install from my Admin account.
I prefer to be a standard use on the Mac therefore would appreciate advice if it is possible to use Elements as myself or do I have to create another account (Admin user) which doesn't have all my photos etc in order to run Elements smoothly?
I am also considering Aperture but think I still need Elements for extra tools. Hopefully someone will know if this is possible as a standard user. My initial thoughts were to install from Admin account and then log out and start to use Elements as my own account but this is where the big question comes in after reading the way Adobe installs and works with permissions.
I will be prepared to wait rather than find I have introduced problems by the wrong type of install and use. Thanks for any advice, I have checked Adobe's forum and various read reviews but still haven't overcome my worries about this.

ld simply keep their photos in their Home Folder and use Photoshop Elements to process them.
Thank you Roger your help is appreciated as it helps with my other installs too.
I am still uncertain if Elements will work for me as a standard user as the other topic made me aware of problems which I presume would make my use as a standard user after the install troublesome?
Quote from http://discussions.apple.com/thread.jspa?threadID=1806242&start=30&tstart=0
+Elements needs to be installed by admin account, and to be run from the same account or you can run into a problem with certain things not working correctly. Some of the permissions on some of the files are just plain wrong. On my own install I went in and changed them to what they really ought to be so that everything works in all *admin accounts*.+
Thank you for your patience with my feeble understanding of the way Elements would work for me if I am not a day to day Admin. Hopefully I am thinking along the wrong path and I would be able to continue with my account setup using Elements after the Admin install.

Free/Busy Error from Exchange Online Cloud Mailbox to on-premise

Hi, have a successful federation configured between Exchange 2010 SP3 (latest Roll up) and Office 365. This is to allow free/busy lookups during various migration stages (this is not Exchange Hybrid). Autodiscover works well and all functions work ok.
On-premise users can see cloud users free/busy
Cloud users cannot see on-premise users free/busy.
All local based free/busy works on-premise and in the cloud.
The Exchange Connectivity tool returns the below error from all accounts, this is the only error:
(A wildcard certificate is in use and am wondering if this could be contributing to the problem as I have seen this once before)
Attempting to send an Autodiscover POST request to potential Autodiscover URLs.
Autodiscover settings weren't obtained when the Autodiscover POST request was sent.
Additional Details
Elapsed Time: 4979 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL
https://autodiscover.company.com/AutoDiscover/AutoDiscover.xml for user
[email protected]
The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response.
Additional Details
An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name
(UPN).
HTTP Response Headers:
Content-Type: text/html
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate,NTLM,Basic realm="autodiscover.company.com"
X-Powered-By: ASP.NET
Date: Sun, 15 Jun 2014 22:33:34 GMT
Content-Length: 58
Cache-Control: proxy-revalidate
Proxy-Connection: Keep-Alive
Connection: Keep-Alive
Proxy-support: Session-based-authentication
Elapsed Time: 4979 ms.
Any help or guidance would be appreciated as this is the only error we receive now and everything else works.
Kind Regards, Antonio.

Yep, indeed it does, except the password works when carrying out an autodiscover test, when testing free/busy that error appears. Lookups for free/busy work from on-premise to cloud, cloud to on-premise does not work unless you explicitly allow permissions
on a user basis. The on-premise Exchange 2010 SP3 environment is using an external wildcard cert and thought this could be causing the issue, may consider updating to SAN based. What do you think?
Antonio Traetto

FDMEE Export Errors

Does anyone know how you can get a data dump of export errors from FDMEE aside from what is shown in the log within Process Details?
That log only appears to show the first 101 errors.

You can look at the physical log on the file system.
If you click on "Process Details", it will show you the path to the log file at the top.

Change users from Administrator account to user account using domain controller

good day,
In our domain controller we have around 1200 users, all these users have admin account and there is the problem.
I want to change them to a user accounts so they can not change IP address and install or uninstall programs with out our consent.
Is there a possibility to do this with the domain controller, because i don't want to go change the computers one by one. from admin account to user account.
Thank you so much

Hi,
I agree with
Ravikumar. I assume what you mean is local admin rights. Since you have so many users which
have local admin rights, you would have created an administrator group and add all the users to that group in Local Users and Groups of Computer Management. You can remove them from the administrator group and add them to a user group.
More information:
Local Users and Groups
http://technet.microsoft.com/en-us/library/cc786411(v=ws.10).aspx
Best regards,
Susie

Error when using super admin account to migrate from Communigate Pro to exchange 2013

Hi everyone,
We are facing issues to migrate mails from communigate pro to exchange 2013 using 'MigrateIMAP.pl' tool. Communigate pro has a super-admin account which can retrieve the mails from any mailbox but when sending to Exchange 2013, there is no such super-admin
account. I have created a user account granting it full access to all databases using the following:
Get-MailboxDatabase -identity “mailbox name” | Add-ADPermission -user <account name> -AccessRights GenericAll
Get-mailbox | Add-MailboxPermission -User <account name> -AccessRights FullAccess -InheritanceType All
The tool uses the following command: (x.x.x.x is for server IPs & mytestlist contains user accounts to be migrated)
./migrateIMAP.pl -d -I -U -s 100 -L mylog7 -e superadmin:password\<i -S x.x.x.x -f
exchangeadmin:password -D x.x.x.x -i mytestlist
The IMAP4 logs shows the following error:
2014-02-04T13:32:37.699Z,0000000000000579,1,x.x.x.x:143,x.x.x.x:47688,,1,65,34,authenticate,PLAIN cmJhbGxjaGFuZAByYmFsbGNoYW5kAEwwZ09uQDEyMw==,"R=""1 BAD Command Argument Error. 12"""
Anyone, please help me out, i've spent a whole week trying to solve this. Thanks in advance

I would suggest you go for third party tool.
One such tool is CodeTwo, it does the job and very cheap. It will get the job done is ziffy
http://www.codetwo.com/exchange-migration/
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Lightroom - Export error from Admin account

Similar Messages

Maybe you are looking for