Export for production company

With old Ultiboard versions it's possible to make a EDF or GenCAD export. We use this export for programming (Tecnomatix/Unicam) our SMT Pick&Place equipments. In the latest Ultiboard versions it's only possible to export a centroid file. This means a lot manual programming. Is there any possibility for an better export than centroid??

Everybody is talking about cost reduction. Therefore it’s necessary to reduce as much as possible the manual programming. With programs like Unicam or Aegis is better to use an edf, gencad or ODB++ export. In these kinds of export information about traces is also included. For SMT we use these information for our SMT stencil design. The use of these kinds of export instead of centroid means less manual programming (costs).
Now days the interfacing between software must better than in the past.
Why has Ultiboard skipped this option?? Why not an ODB++ export possibility? 

Similar Messages

  • New mac pro (2014) specs for production company help

    Hey guys new to the forum!
    I work for a production company that makes mainly online corporate video and motion graphics, lots of character animation, typography pieces and bits and pieces of 3D work with cinema 4d r14. We currently work on 2009 mac workstations which have the following specs:
    Model Name:          Mac Pro
    Model Identifier:          MacPro3,1
    Processor Name:          Quad-Core Intel Xeon
    Processor Speed:          3.2 GHz
    Number Of Processors:          2
    Total Number Of Cores:          8
    L2 Cache (per processor):          12 MB
    Memory:          16 GB
    Bus Speed:          1.6 GHz
    Chipset Model:          ATI Radeon HD 2600
    I've been asked to get some specs because we plan on buying the new mac pro and I have been reading some articles regarding performance with After Effects but in all honesty i really don't understand what sort of specs i need because i'm good at designing and animating but it when it comes to CPU, GPU talk it's all very confusing!
    My boss wants faster previews, faster render times and an all round better performance than what we have now, and with the possibility of outputting 4K in the near future i have to bear that in mind as well.
    If you guys could give me a helping hand choosing a new mac pro i would be eternally grateful!                         
    Thanks,
    Mark

    The new Mac Pros are, without a doubt, amazing machines. But are they value for money?
    A significant cost in these machines is the high end AMD GPUs, which is utilised very well by Apple in their own software like Final Cut Pro X, Compressor and Motion.  If you use those a lot, it's a no brainer. Place your order.
    Premiere Pro CC has  support for the GPUs (one GPU during playback, but can utilise both during renders.)
    There has been no pledge from Adobe for After Effects support. AE's ray-traced 3D render engine has been virtually abandoned by Adobe, so there will never be support for AMD CPUs for it. They are now more focussed on integration with Maxxon's Cinema 4D as a 3D alternative, but Cinema 4D exclusively renders with the CPU – no GPU benefit.
    The AE team are hinting about substantial multi-processing enhancements in the next major update, so it seems After Effects users will continue to be better off with faster multi-core CPUs, rather than expensive GPUs. With more CPU cores comes the need for more RAM.
    Some third party vendors of AE plugins, like VideoCopilot's Element 3D and Optical Flares, have pledged support for the Mac Pro GPUs. But the problem with intertwining CPU-dependent software with GPU-dependent plugins is you need to turn off multi-processing to get the best results, negating the value of your powerful Mac Pro CPU.
    Photoshop and Indesign rarely need the balls of a machine like the new Mac Pro. The new high-speed SSDs will certainly make them run faster than your average iMac, but it's not a HUGE leap for the cost difference.
    The benchmarks I've seen on media encoding for the new Mac Pros are a little underwhelming, to be honest. They're fast, yes, but not twice as fast as a $4000 iMac, despite a high-end machine being twice (or more) expensive.
    So, as a primarily Adobe user, I'm a bit torn. Personally, I think my money will be better spent buying a high-spec iMac for now. I can always on-sell it in 6 months if Adobe prove they are really coming to the party with Mac Pro support. But right now I'm not seeing proof of the benefits (from Adobe) in buying a $6K+ machine.
    If you are determined to buy the new Mac Pro, and After Effects and C4D are your primary tools, get the most powerful CPU you can afford, make sure you have at least 3-4GB of RAM for each CPU, and keep the lowest-specced GPUs.

  • Export DVD for product CRM/SOLMAN Upgrade Solution Manager 7.1

    Hello Experts,
    It is my first time doing an upgrade and I have a problem, the SOLMANUP tool gives me: "Enter at least the mount point containing "Export DVD for product CRM/SOLMAN"", I downloaded from SMP the 12 parts of the SAP Solution M. 7.1 Upgr.Export (51039400), I got now 1 .exe file and 11 .RAR files and when I put the path, the SOLMANUP doesnt recognize as a valid mount point, any advices?
    Regards,
    Paul

    Hi Paul,
    Have you already checked note 1577909?
    Note: 1462137 - Add. info. about Upgrading to SAP Solution Manager 7.1
    Please enter mount points for the DVDs required for the upgrade.
    Enter at least the mount point containing "Export DVD for product
    CRM/SOLMAN"
    Please check if the requested Data Carrier is mounted on any of the mount points:
           Path                                     Description
          +                                        +             +
         1 /usr/sap/SMP/SOLMANUP/51042010
         2 /usr/sap/SMP/SOLMANUP/51040039
         3 /usr/sap/SMP/SOLMANUP/51040119
         4 /usr/sap/SMP/SOLMANUP/51040868_2/DVD_OS_
         5 /usr/sap/SMP/SOLMANUP/upgrade_export_dvd
         6 /usr/sap/SMP/SOLMANUP/upgrade_export_dvd
    You will have to download all the archives and then extract them. Please go through the
    SAP Note 886535 for these kind of archives. Once everything is archived
    and extracted, provide the path.
    Thanks
    Regards
    Vikram

  • PRODUCTION FLOW FOR MANUFACTURING COMPANY

    Hi All experts,could you please share with me the production flow from raw material to profitability?I am 1st level support in my company and would like to know more about the business process for a production company.Please help and thanks in advance.

    Dear,
    Manufacturing is the transformation of raw materials into finished goods for sale, or intermediate processes involving the production or finishing of semi-manufactures. It is a large branch of industry and of secondary production. Some industries, like semiconductor and steel manufactureres use the term fabrication.
    Production
    Formal activity that adds value to goods and services, including creation, transport, and warehousing until used. Production is an organized process with specific goals.
    Please refer this link also,
    [PRODUCTION FLOW |http://sap-img.com/production/discrete-manufacturing-the-step-by-step-tcodes.htm]
    /message/3068159#3068159 [original link is broken]
    Regards,
    R.Brahmankar

  • SapUp: "Export DVD for product ERP"

    Hi everybody.
    I'm ugrading SR3 to EHP4 but i don't know what DVD number for Label: "Export DVD for product ERP"
    Could you help me?
    Thanks you.

    Thanks for Reply.
    I'm using SapUp to Upgrade my system from SR3 to EHP4.
    When i used SapEHPI, it met error in step EHP_INCLUSION and i could not  fix it!
    <<detail error had describe in my message: SAPehpi error >>
    Could you help me.
    Thanks

  • Exporting For YouTube - Premiere Pro CS5 (Canon XL2)

    I shot a promo video with my Canon XL2, and would like to upload the finished product to YouTube at the highest possible quality in order to help promote the company I work for.
    Footage shot in 30p at 29.97 fps, 16:9 - NTSC.
    Sequence settings are all correct and match my footage perfectly.
    I have exported the video as H.264, AVI, MOV, MP4, MP2, WMV and countless other formats. When played on my computer the video quality is SUPERB. I am ecstatic at how it turned out, HOWEVER, when I upload the video -in any format- to YouTube, it looks absolutely horrible - as though it were shot with a webcam.
    Does anyone have any advice as to what I might be doing wrong? Anyone had any experience with the XL-2 and Premiere Pro videos being ugly when uploaded to YouTube?
    Thanks a bunch!

    Be very careful when using Adobe's presents for YouTube, Vimeo, etc.  They have a fixed frame rate but it doesn't always match your source frame rate and this adds additional render time and can drop or add (adding is much worse) frames.
    The worst offender is a preset that is for non drop-frame 30.0 fps (instead of drop frame 29.97) because every 3 seconds 3 frames get added.
    Also be aware that when exporting for the web (or most anything other than to DVD), you want to use square pixels.
    This might require a bit of tweaking with the presets but it is well worth the effort.
    864x480 is the square pixel equivalent to 720x480 widescreen (1.21...).
    For more indepth info on the presets (and my rants on the matter) - have a look at my CS5 and C5.5 articles.
    http://www.eventdv.net/Articles/News/Feature/Benchmarking-Adobe-Premiere-Pro-CS5-70277.htm
    (under the heading "Don't trust the presets")
    http://www.eventdv.net/Articles/ReadArticle.aspx?ArticleID=74852
    (under the heading "Working with watch folders in Adobe Media Encoder CS5.5")

  • How can I setup different number range for each company code?

    Dear GURU,
         Is it possible to setup different number range for material document by company code? If yes, what should i do.
         Thank you in advance.
    Thammarit

    Hi,
    you maintain the number assignment for the following documents:
    material documents
    physical inventory documents
    The number assignment for these documents is not to be confused with the number assignment for accounting documents . The number assignment for accounting documents depends on the document type which is allocated to the transaction.
    The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
    You cannot change the transaction/event types. However, you can change the number range intervals or you can allocate transaction/event types to new groups.
    Caution: Change in the Fiscal Year
    If, at the time of a fiscal year change, you reset the number range in the new fiscal year, separate number range intervals for the previous year and for the current year must be maintained for one month to allow postings to the prior period.
    Example:
    Interval for 1995: 4900000000 to 4999999999 status: 4900451234
    Interval for 1996: 4900000000 to 4999999999 status: 4900000000
    If only one number range interval exists for both years and you make any postings to the previous period, the system will assign numbers that already exist in the previous year. This would lead to an update termination.
    In the standard system, the transaction/event types and number range intervals are preset for Inventory Management as follows:
    Physical inventory documents
    Number range interval from 0100000000 to 0199999999
    This group contains the following transaction/event types:
    - IB Physical inventory documents
    - ID Physical inventory documents for counts and differences
    without reference
    - IN Physical inventory documents for recounts
    - IZ Physical inventory documents for count without reference
    - WV Physical inventory documents for difference postings in the WM System
    Material documents for goods movements and inventory differences
    Number range interval from 4900000000 to 4999999999
    This group contains the following transaction/event types:
    - WA Goods issues, transfer postings, other goods receipts
    - WH Goods movements for handling units (HU)
    - WI Material documents for inventory adjustment postings
    - WL Goods issues for delivery documents (SD)
    - WQ Goods movements for usage decisions (QM)
    - WR Goods movements for completion confirmations (PP)
    - WS Goods movements for run schedule headers (PP)
    - WZ Documents for batch status changes
    Material documents for goods receipts
    Number range interval from 5000000000 to 5999999999
    This group contains the following transaction/event types:
    - WE Goods receipts for purchase orders
    - WF Goods receipts for production orders
    - WO Subsequent adjustment of subcontract orders
    - WW Subsequent adjustment of active ingredient materials
    Inventory sampling numbers
    Number range interval from 0200000000 to 0299999999
    This group contains the transaction/event type SI.
    SAP recommends that you accept the settings defined in the standard system. In this case, no action is required on your part.
    Note
    For performance reasons, 10 document numbers are buffered on the application server. In this way, gaps in number assignment can occur.
    Actions
    Check whether you can use the predefined groups and number intervals.
    If you want to change any groups, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select the transaction/event type that you want to re-allocate.
    c) Place the cursor on the new group and choose Edit -> Assign element group).
    d) Save your settings.
    If you want to define new groups, proceed as follows:
    a) Select Group -> Maintain.
    b) Then select Group -> Insert.
    c) Enter a text for the number range group.
    d) Maintain the number interval for this number range group.
    e) Allocate the transaction/event types to the number range groups (see step 2).
    If you want to maintain new number range intervals for an existing group, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select a group and choose Interval -> Maintain.
    c) Choose Edit -> Insert year.
    d) Maintain the number interval for the new fiscal year.
    If you do not want to use the year-related number assignment method, enter 9999 in the field Year.
    Note on transport
    You transport number range objects as follows:
    In the initial screen, choose Interval -> Transport.
    Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
    Dependent tables are not transported or converted.
    Thanks and regards
    Rajesh

  • Maintaining Remote key in look up tables for Production data

    Hi,
    me
    SEE in DEV and QA to maintain the Remote key for Look up tables.First i have exported those look up table values and again imported with mapping Remote keys (clone the field and map it to Remote key.). By this i have maintained the Remote keys to all look up tables. Now for Production what should i do. Is it the same process extract all records from production into our desktop and then again import it using IM, clone the field and map it to Remote key.
    1. Is this the right process?
    2. What happens if there are huge data present in production how to proceed furthr then?
    Required your suggestion please.
    Thanks,
    Pradeep

    HI Pradeep,
    I dont see any problem with this method if I am getting it right
    You are updating remote keys by reimporting lookup data, and this way you have multiple remote keys for data in lookup table,right?
    This will help you to automap entries in Import process for different Remote systems.
    I did not get your 2nd point?
    Thanks,
    Ravi

  • What information can I use to find out which software has been downloaded for my company?

    Hello Adobe forums! I hope this is the right spot to put these questions.
    This is the situation:
    I work for a very small printing outfit in a very small town in the middle of nowhere, Canada.
    Everybody that worked for the company that was involved with adobe in the past has now moved on, except people that can't help with this issue.
    I have managed to slueth some information from some people here but nothing concrete.
    Anyways, so far that I know that this company subscribed to some sort of Adobe subscription service that enabled them to upgrade as need be for an annual fee. At least this is what i've been told.
    We have both a PC and a Mac version of Adobe Design Premium CS3, working on their respective computers. The reason I need to know whats going on is that the PC with CS3 is about to go kaput - So I've got a new PC. Now I need to transfer the design suite from one computer to another. I know I can have active two installations of the design suite per purchase, but I also know I can deactivate one activation and reactive it again elsewhere. Thats the option I want to pursue.
    I have no idea what usernames were used to download these products, no idea which people in the company's history were responsible for acquiring these suites. I have a list of names and emails, and also I do beleive the company credit card has remained the same for many years, and so I have that as well.
    I also still have the working and legitimate copies of Design Premium CS3. I do not have serial numbers for these programs because I dont have access to the emails that purchased them. I did however yesterday register the photoshop CS3 to the current email address I use now for adobe.com (although I haven't seen anything reflected in my account just yet - I understand it takes 24-48 hours for that to show up) So that I believe should at least be one step towards proving to adobe I exist and that my design suite is genuine.
    So basically I'm looking for two things. One, I need to find out which account we used to acquire the software (With email addresses and a CC# should will I be able to find this?) and two, I need the serial number and a link to download CS3 Design Premium, which I'd imagine is dependant on the first objective.
    (An interesting side note: in the Adobe folder on the dying PC there is an unistalled zip file containing CS4 Design Premium. I know the PC wont support CS4, so maybe thats why its not installed. Interesting that it is on there - is there any way i can tell if it was downloaded from a subscription service by jsut looking at the .7s zip file?)
    Thanks for any help anyone can provide! Any further info I can give I will glady hand out, cheers!

    Two thoughts:
    (1)     It is possible that your Adobe software was the result of belonging to a now-discontinued Adobe Print Service Provider program where for a certain annual membership fee, print service providers were provided with (a) both a Windows and Macintosh license to the Adobe print-oriented software products (such as InDesign, Illustrator, Photoshop, and Acrobat) and (b) special direct product support as well as the ability to put your name on Adobe's website as a member of this program. The program ended over a year ago if I remember correctly.
    (2)     You may wish to contact Adobe Customer Support (not Technical Support) and see if they can track down any and all licenses associated with your company. If you have the names of the former employees who worked with this software, it would be helpful. Likewise, if you were a member of the discontinued Adobe Print Service Provider program, you may have some options for upgrading/updating the software you have.
    Unfortunately, you cannot get any more definitive information about your situation on these forums.
    Good luck.
              - Dov

  • TAX code custmisaion for Overseas Company with local Tax code

    Hi Gurus...
    I am facing following scenario:
    **My company is set ups as overseas company / company code  curr / local Curr = overseas Curr, My group currency is local currency / home country curr.
    **I like to raise PO for a vendor who is local and supplying goods locally, invoicing in local currency for Overseas company. Goods will be used locally.
    I like to know how should I configure this from TAX perspective.
    Thanks
    Hiren
    Edited by: Hiren Mazumdar on Mar 6, 2009 4:04 AM

    Hi
    <u>SPRO Path - hope this will help you in customizing </u>
    1.
    SRM Server -> Cross-Appl Basic settings -> Tax Calculation ->Determine Tax Code for Country/Product Category.
    2.
    SRM Server -> Cross-Appl Basic settings -> Transaction Tax engine -> Define Tax Settings .
    <b>Please go through the links below -></b>
    Re: Tax Calculation
    Re: Tax code T1 does not exist for jurisdiction code error in shopping basket
    BBP_DET_TAXCODE_BADI is not setting the Tax Code !  :-(
    Tax code is not changing in back-end
    Tax code
    Tax code T1 does not exist for jurisdiction code error in shopping basket
    Change tax code in SC
    Regards
    - Atul

  • BAPI_GOODSMVT_CREATE for production order,not update database

    hi guru,
    i am using BAPI_GOODSMVT_CREATE for production order.When i m testing this BAPI
    at se37 it creates one mat doc no and i m not getting any return messages.Now i m
    writing code for it at se38. but it does not update the database even though i used
    bapi_transaction_commit. here sy-subrc = 0.bt when i m checking MSEG table showing
    that mat doc no does not exists.
    please help me out  asap.
    thanks and regurds,
    manasi

    CHECK THIS CODE
    REPORT ZBAPI_GOODSMVT_CREATE.
    *DECLARING INTERNAL TABLE TO HOLD FILE DATA.
    DATA: BEGIN OF itab OCCURS 0,
              text(200),
          END OF itab.
    *DECLARING INTERNAL TABLE TO PASS FILE DATA.
    TYPES: BEGIN OF tw_goodsmvt,
                pstng_date TYPE budat,
                doc_date TYPE bldat,
                material TYPE matnr,
                plant TYPE werks_d,
                stge_loc TYPE lgort_d,
                move_type TYPE bwart,
    *            entry_qnt TYPE erfmg,
                costcenter TYPE kostl,
            END OF tw_goodsmvt,
            tt_goodsmvt TYPE STANDARD TABLE OF tw_goodsmvt.
    DATA: lt_goodsmvt TYPE tt_goodsmvt,
          lw_goodsmvt TYPE tw_goodsmvt.
    *declaring internal table of bapi structure.
    DATA:s_goodsmvt_header LIKE  bapi2017_gm_head_01,
         lt_goodsmvt_item TYPE STANDARD TABLE OF bapi2017_gm_item_create WITH HEADER LINE,
         lt_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    DATA:str_filename TYPE string,
         gm_code TYPE gm_code,
          v_head_count TYPE i VALUE 0,
          v_prev_count TYPE i VALUE 1,
          v_qnt TYPE string,
          v_dummy.
    *selection screen
    SELECTION-SCREEN BEGIN OF BLOCK bk with frame title text_001.
    PARAMETERS:p_docdat TYPE bldat,
               p_pstdat TYPE budat,
               fname LIKE rlgrap-filename.
    SELECTION-SCREEN END OF BLOCK bk.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR fname.
    *to provide F4 functionality.
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name = syst-cprog
        IMPORTING
          file_name    = fname.
    * start of selection
    START-OF-SELECTION.
      str_filename = fname.
      gm_code = '06'.
    * to upload data
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename            = str_filename
          filetype            = 'ASC'
          has_field_separator = 'X'
          read_by_line        = 'X'
        TABLES
          data_tab            = itab.
    *SPLITING DATA TO INTERNAL TABLES.
      LOOP AT itab.
        IF itab+0(1) EQ 'H'.
          v_head_count =  v_head_count + 1.
          IF v_head_count GT v_prev_count.
            PERFORM bapi_upload.
          ENDIF.
          SPLIT itab-text AT ',' INTO v_dummy
                                      lw_goodsmvt-pstng_date
                                      lw_goodsmvt-doc_date.
          s_goodsmvt_header-doc_date   = lw_goodsmvt-doc_date.
          s_goodsmvt_header-pstng_date = lw_goodsmvt-pstng_date.
          v_prev_count = v_head_count.
      ELSEIF itab+0(1) EQ 'L'.
        SPLIT itab-text AT ',' INTO v_dummy
                                    lw_goodsmvt-material
                                    lw_goodsmvt-plant
                                    lw_goodsmvt-stge_loc
                                    lw_goodsmvt-move_type
                                    v_qnt
                                    lw_goodsmvt-costcenter.
    * PASSING DATA TO INTERNAL TABLE TYPE BAPI STRUCTURE.
        lt_goodsmvt_item-material = lw_goodsmvt-material.
        lt_goodsmvt_item-plant    = lw_goodsmvt-plant.
        lt_goodsmvt_item-stge_loc = lw_goodsmvt-stge_loc.
        lt_goodsmvt_item-move_type = lw_goodsmvt-move_type.
        lt_goodsmvt_item-entry_qnt = v_qnt.
        lt_goodsmvt_item-costcenter = lw_goodsmvt-costcenter.
        APPEND lt_goodsmvt_item.
      ENDIF.
      v_prev_count = v_head_count.
      ENDLOOP.
      PERFORM bapi_upload.
    *&      Form  bapi_upload
    form bapi_upload .
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
      EXPORTING
        goodsmvt_header             = s_goodsmvt_header
        goodsmvt_code               = gm_code
    *   TESTRUN                     = ' '
    * IMPORTING
    *   GOODSMVT_HEADRET            =
    *   MATERIALDOCUMENT            =
    *   MATDOCUMENTYEAR             =
      tables
        goodsmvt_item               = lt_goodsmvt_item
    *   GOODSMVT_SERIALNUMBER       =
        return                      = lt_return.
            PERFORM commit_work TABLES lt_return.
            CLEAR : lw_goodsmvt, s_goodsmvt_header.
            REFRESH: lt_goodsmvt[], lt_goodsmvt_item[].
    endform.                    " bapi_upload
    *&      Form  commit_work
    *       text
    *      -->P_LT_RETURN  text
    form commit_work  tables   p_lt_return structure bapiret2.
      IF NOT lt_return[] IS INITIAL.
    *error handling
    loop at lt_return.
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
       ID              = lt_return-id
       LANG            = sy-langu
       NO              = lt_return-NUMBER
       V1              = lt_return-message_v1
       V2              = lt_return-message_v2
       V3              = lt_return-message_v3
       V4              = lt_return-message_v4
    IMPORTING
       MSG             = lt_return-MESSAGE
    EXCEPTIONS
       NOT_FOUND       = 1
       OTHERS          = 2.
    WRITE: lt_return-id, lt_return-message, lt_return-message_v1, lt_return-message_v2,
                 lt_return-message_v3, lt_return-message_v4.
          CLEAR lt_return.
        ENDLOOP.
      ELSE.
    * commit work
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    *   EXPORTING
    *     WAIT          =
       IMPORTING
         RETURN        = lt_return.
    WRITE: lt_return-id, lt_return-message, lt_return-message_v1, lt_return-message_v2,
                 lt_return-message_v3, lt_return-message_v4.
          CLEAR lt_return.
    endif.
    endform.                    " commit_work

  • Error while doing Good Issue for Production Order using BAPI

    Hi All,
    I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
    I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
    *Action in Transaction (GM_CODE)
    *GM Code for Goods Issue for Production Order is 03
      gs_gmcode-gm_code = '03'.
    *Header Data
    *Posting date
      gs_header-pstng_date = sy-datum.
    *Document date
      gs_header-doc_date   = sy-datum.
    *Item Data
    *Material
      gs_item-material  = zptp_s_rf_migo_261-matnr1.
    *Movement Type
      gs_item-move_type = '261'.
    *Movement Indicator
      gs_item-mvt_ind   = 'F'.
    *Stock Type
      gs_item-stck_type = 'F'.
    *Plant
      gs_item-plant     = gv_plant.
    *Storage Location
      gs_item-stge_loc  = gv_str_loc.
    *Quantity
      gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
    *Unit
      gs_item-entry_uom = gv_uom.
    *ISO code for unit of measurement
      gs_item-entry_uom_iso = gv_uom.
    *Order Number
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input  = zptp_s_rf_migo_261-aufnr
        IMPORTING
          output = gs_item-orderid.
    *Reservation Number
      gs_item-reserv_no = gv_resv_num.
    *Reservation Item
      gs_item-res_item = gv_resv_itm.
    *Reservation Type
      gs_item-res_type = gv_resv_type.
      APPEND gs_item TO gt_item.
    Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
      CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
        EXPORTING
          goodsmvt_header       = gs_header
          goodsmvt_code         = gs_gmcode
        IMPORTING
          goodsmvt_headret      = gs_headret
        TABLES
          goodsmvt_item         = gt_item
          goodsmvt_serialnumber = gt_serial
          return                = gt_return.
    Thanks in Advance.

    hi,
    did you look at message ?
    System says, there are differences between the interface data and the order data. It can be anything. I think you should check
    data in the interface . 
    this is the long explanation of your message :
    Diagnosis
    When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
    Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
    The system checks this for the material and the order item.
    System response
    Due to this difference, the system cannot post the goods receipt.
    Procedure
    Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
    << Moderator message - Point begging removed >>
    Edited by: Rob Burbank on Feb 6, 2012 11:24 AM

  • Replicating Custom Fields for Products in CRM  from ECC

    Hi All,
    I am having difficulty in replicating SAP standard field values from ECC to custom fields for products in CRM. This is what i did:
    1. I created a new settype(ZMASTER_INFO) with a single attribute(ZIND_STD) and added
        this new settype to MAT_HAWA. (As all our materials fall under this material type).
    2. I am looking to map SAP standard field from ECC to this custom field of mine.
        I wrote the code in CRM BADI 
        'ZPRODUCT_CUSTOMER2->MAP_R3_TO_CRM_MATERIAL' with the following code:
    DATA: ls_ZMASTER_INFO TYPE ZMASTER_INFO_maintain.
    DATA: ls_category_bdoc       TYPE COMT_PROD_CAT_REL_MAINTAIN,
          ls_category            TYPE COMT_PROD_CAT_REL,
          lt_categories          TYPE COMT_PROD_CAT_REL_TAB,
          ls_settype             TYPE COMT_settype_ext,
          ls_cat_settype_rel     TYPE COMT_CAT_FRAG_REL,
          lt_cat_settype_rel     TYPE COMT_CAT_FRAG_REL_TAB,
          lt_cat_settype_rel_all TYPE COMT_CAT_FRAG_REL_TAB.
    LOOP AT lt_cat_settype_rel_all INTO ls_cat_settype_rel.
          CALL FUNCTION 'COM_SETTYPE_READ_SINGLE'
            EXPORTING
              IV_SETTYPE_GUID         = ls_cat_settype_rel-frgtype_guid
            IMPORTING
              ES_SETTYPE              = ls_settype
           EXCEPTIONS
             NOT_FOUND               = 1
             NO_IMPORT_VALUES        = 2
             NO_TEXT_FOUND           = 3 .
          IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
      CASE ls_settype-frgtype_id.
          WHEN 'ZMASTER_INFO'.
          ls_ZMASTER_INFO-relation-owner = 'X'.
          ls_ZMASTER_INFO-relation-logsys = cs_product_bdoc-header-com_product-logsys.
          ls_ZMASTER_INFO-data-ZZ0010 = is_mara-STD_DESCR.
          ls_ZMASTER_INFO-DATA_X-ZZ0010 = 'X'.
          APPEND ls_ZMASTER_INFO TO cs_product_bdoc-data-ZMASTER_INFO.
          APPEND ls_settype-FRGTYPE_GUID TO cs_product_bdoc-data-MNT_SETTYPE.
       ENDCASE.
    ENDLOOP.
    Since in ECC i am not having any custom fields i did not write any code in ECC for TPS34 and TBE24. I just wrote this BADI in CRM and using the field S_MARA-STD_DESCR.
    I am not sure if i need to write the code in ECC. COUld anyone please confirm if i need the code in ECC?
    Also in the CRM BADI, lt_cat_settype_rel_all is EMPTY. Not sure how this gets its value.
    Could anyone please suggest if i am missing anything here? Any help is appreciated.
    Thanks,
    Karuna.

    Hi Karuna,
    One more solution is to change the BDoc data content before it hit the Database.
    this can be done in badi: Data_Exchange_badi (if u dont find this try with following search string: xchange)
    In the above mention badi you will find a method which is used to populated the contend jst after bdoc in CRM is being populated by R/3 data.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Business partner maintenance for Product catalog view - Problem

    Hi All,
    I am using the FM 'CRM_PRP_MAINTAIN' to create Business partner assignment for product catalog view.
    Can anyone help me with this FM?
    I am passing the following:
            gs_prp_bupa_i-ref_kind = 'B'.
            gs_prp_bupa_i-processing_mode = 'A'.
            gs_prp_bupa_i-bupa_ref_guid = gv_partner_guid.
            gs_prp_bupa_i-partner_id = gv_partner.
            APPEND gs_prp_bupa_i TO gt_prp_bupa_i.
            ls_input_fields-ref_kind = 'D'.
            ls_input_fields-objectname = 'PRP_BUPA_I'.
            ls_input-fieldname = 'BUPA_REF_GUID'.
            APPEND ls_input TO ls_input_fields-field_names.
            ls_input-fieldname = 'PARTNER_ID'.
            APPEND ls_input TO ls_input_fields-field_names.
            ls_input-fieldname = 'PROCESSING_MODE'.
            APPEND ls_input TO ls_input_fields-field_names.
            ls_input-fieldname = 'TYPE'.
            APPEND ls_input TO ls_input_fields-field_names.
            APPEND ls_input_fields TO lt_input_fields.
            CALL FUNCTION 'CRM_PRP_MAINTAIN'
              EXPORTING
                it_prp_bupa_i                   = gt_prp_bupa_i
              CHANGING
                ct_prpadm_h                     = lt_prpadm_h
                ct_prpadm_i                      = lt_prpadm_i
                ct_input_fields                   = lt_input_fields
                cv_log_handle                   = lv_log_handle
             EXCEPTIONS
               error_occurred                  = 1
               prp_locked                      = 2
               no_authority                    = 3
               status_change_not_allowed       = 4
               prp_id_already_exists           = 5
               invalid_prp_id                  = 6
               OTHERS                          = 7 .
    But i don see the partner assignment working.
    My doubt here is wat GUID shud b passed in the field gs_prp_bupa_i-GUID. As of now i m not passing any value here.
    Please help me.
    IF not this FM wat else can i use?

    Hi Ganesh,
    Thanks for your response.
    i hope you understood my question.i have already performed all the steps which you have mentioned.Understand my query first.
    I could solve that query myself.
    Message was edited by: mdv sapcrm

  • Strokes on appearance is getting cut off when exporting for web & Devices

    I'm a screen print artist using Adobe Illustrator CS5 in windows 7(blah!) to export images of our customers' artwork into a huge folder of images on a server. The images are then loaded into a program so that they can be viewed company-wide and by the customer.
    Occasionally, when there is an appearance applied to text it seems to cut off the tops and/or bottoms of the outermost stroke.This seems to be only happening to text, and happens randomly and is very annoying. See the image attached.
    it does this with both JPEG and PNG images, and whats more, changes when you adjust the image size. it either gets better or worse. I have to change the image size on every export so that they are all within our size requirements.
    I have found that if you put the art into an envelope with all the settings at 0 and then export for web it prevents this from happening. However, that isn't very efficient as i need to be moving a ton of artwork a day, and I am not the only person who may be working on the Illustrator file.
    Is there any setting either in illustrator or windows that may be causing this anomaly?

    Try adding:
    Effect >> Path >> Outline Object
    So  your type will still be editable
    If that does not work you may want to:
    Type: Create Outline
    I only had this problem once before, on some snickerdoodle cookies package, and that was a script font. Might be related to the font you use.

Maybe you are looking for