Export/Import using CTS for PI

Hi Experts,
From PI Dev System i am transporting the ID objects using CTS.
All objects assigned to scenario and scenario is active. when i am exporting the Configuration scenario, it is showingt as sucess.
the problem is when we import in prod system only few objects are enabled, rest of them disabled.
can any one provide me the solution for this.
regards,
ganesh.n

HI Jenny,
Thanks for your early response, let me give more clarity
we are only exporting the ID objects.
Client Basis Team is releasing them and importing them into PI-Prod, once they import, few of the objects of the relaetd configuration scenario are seen as disabled ( greyed out )and few of them enabled.
In order to activate the transported config objects in the target system, you should transfer the change list from the CTS Admin account to your account then activate.
This is handled by Client Basis team, and we are not sure whether how they are doing.
Regards
Chandra

Similar Messages

Export import - using TOAD FOR ORACLE and ORACLE DATABASE 10G EXPRESS or s

Hi all,
Could you please kindly help me?
I am using TOAD FOR ORACLE to export a table to flat file A. The tool just supports to distinguish fields by "spaces".
And the web page of ORACLE DATABASE 10G EXPRESS to import the data from flat file A to another database. To load data to a table from a text file, the web page bases on "comma" to distinguish fields.
So could you have any suggestion for me? I need to export data via TOAD FOR ORACLE. And then import it to another database by the home page of ORACLE DATABASE 10G EXPRESS or sqlplus.
Thank you so much for your help!

Dont use TOAD for exporting your data. Use PL/SQL. Below is the code given in Asktom.com that does what you want.
create or replace function dump_csv( p_query     in varchar2,
                                      p_separator in varchar2 default ',',
                                      p_dir       in varchar2 ,
                                      p_filename in varchar2 )
return number
is
    l_output        utl_file.file_type;
    l_theCursor     integer default dbms_sql.open_cursor;
    l_columnValue   varchar2(2000);
    l_status        integer;
    l_colCnt        number default 0;
    l_separator     varchar2(10) default '';
    l_cnt           number default 0;
begin
    l_output := utl_file.fopen( p_dir, p_filename, 'w' );
    dbms_sql.parse( l_theCursor, p_query, dbms_sql.native );
    for i in 1 .. 255 loop
        begin
            dbms_sql.define_column( l_theCursor, i, l_columnValue, 2000 );
            l_colCnt := i;
        exception
            when others then
                if ( sqlcode = -1007 ) then exit;
                else
                    raise;
                end if;
        end;
    end loop;
    dbms_sql.define_column( l_theCursor, 1, l_columnValue, 2000 );
    l_status := dbms_sql.execute(l_theCursor);
    loop
        exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
        l_separator := '';
        for i in 1 .. l_colCnt loop
            dbms_sql.column_value( l_theCursor, i, l_columnValue );
            utl_file.put( l_output, l_separator || l_columnValue );
            l_separator := p_separator;
        end loop;
        utl_file.new_line( l_output );
        l_cnt := l_cnt+1;
    end loop;
    dbms_sql.close_cursor(l_theCursor);
    utl_file.fclose( l_output );
    return l_cnt;
end dump_csv;
/Here is the link to this thread in asktom.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:95212348059

ExportI/Import Actual Work for each resourse day by day

Hi all,
this is my first post and I'm trying to export some data by Microsoft Project Project Professional 2010 32bit (version 14.0.7140.5002).
I need your help in order to solve this issues :
(Priority 1) export actual work for each resource of my Project in the following format:
       DAY;Resource Name;Summary Task Name; Task Name; hours
(Priority 2) Import actual work for each resource inmy Project in the following format:
       DAY;Resource Name;Summary Task Name(if needed); Task Name; hours
I'm searching into forum but I'm not clear what is the correct object to use.
Thanks a lot for your help.
Alberto

In primis thanks a lot for your answer.
I want create a macro VBA and add a "botton" on task bar in order to execute this macro - output format is CSV file but I think is excellent if I write it in Excel format.
I have partially closed first priority (you can see below code) - I need create a little message box in order to receive period and path output.
I appreciate your collaboration in order to help me. :)
Thanks
Sub ResourceActualWorkDetail()
    Dim rs As Resources
    Dim r As Resource
    Dim A As Assignment
    Dim TSV As TimeScaleValue
    Dim TSVS As TimeScaleValues
    MsgBox ActiveProject.Name
    Close #1
    Open "C:\Users\xxx.xxx\Desktop\" & ActiveProject.Name & " - TimeReport.csv" For Output As #1
    Write #1, "Summary Task;Task Name;Risorsa;Giorno;Ore"
    'Header
    Set rs = ActiveProject.Resources
    For Each r In rs
            For Each A In r.Assignments
                For Each TSV In A.TimeScaleData("01/01/2015", "31/12/2015", pjAssignmentTimescaledActualWork, TimeScaleUnit:=pjTimescaleDays)
                    If TSV.Value <> "" And TSV.Value > "0" Then
                        Write #1, _
                            A.TaskSummaryName _
                            & ";" & A.TaskName _
                            & ";" & r.Name _
                            & ";" & TSV.StartDate _
                            & ";" & TSV.Value / 60
                    End If
                Next TSV
            Next A
    Next r
    Close #1
End Sub

When I attempt to export/import via FTP for OOTP 11 I get a connectivity error message

I participate in OOTP ver 11 fantasy baseball leagues which uses FTP to export and import league databases. For some reason, I have been unable to import/export using FTP. Each time I attempt to export/import I get a connectivity error message stating "am unable to connect". I have not had this problem with the previous versions of OOTP Fantasy Baseball. Plus, when I first upgraded to OOTP 11, I did not have this problem.
== This happened ==
Every time Firefox opened
== I think it started after a firefox update ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; MS-RTC LM 8; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Issues with Export/Import using Database & Shared buffer

Hi All,
I have a method that calls a program via a job and I am having issues passing data between the two.
Note that two different users process the method and program (via job) resp. This is how I am calling the second prog-
SUBMIT ZPROGRAM
             VIA JOB     l_jobname
                 NUMBER l_jobcount
                 USER    i_user
             AND RETURN.
I need to pass data from method to the second program and vice versa and then the method continues its processing with the data acquired from the second program.
I have tried using Import/Export using database and also shared buffer. What I have found is that most of the times I am able to pass data from method to program. However the job takes a couple of min to execute and I think that the data is not making back to the method in time.
I have looked at some useful forum links-
Problem with export/import in back ground
Re: EXPORT/IMPORT to MEMORY
but havent been able to find an answer yet. Any solution? Thanks in advance for your help!
Liz

Hi Suhas, Subhankar
I have tested the scenario without the job previously itself and it works. Thats the reason, i am trying with the job now as my requirement is that I need to change the user while executing the second report.
Here is an example of my import/export - I am passing the return value from the second report to the first.
Code in second report-
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'RET1'.
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
EXPORT RETURN1 TO SHARED BUFFER INDX(ST) ID INDXKEY.
Code in first report -
SUBMIT ZPROGRAM
                 VIA JOB     l_jobname
                     NUMBER l_jobcount
                     USER    i_user
                 AND RETURN.
Once Job close FM is executed successfully, I import the values as follows
IMPORT RETURN1 TO RETURN1 FROM SHARED BUFFER INDX(ST) ID INDXKEY3.
INDXKEY is having value RET1.
However Return1 is not having any values in first report. It has some value in executed without the job
Please note that I have tried Export/import with Database too and I am getting the same results.
Thanks for your suggestions.
Regards, Liz

Choose a database among various databases for export/import using.

Hello,
I am using forms 6i and I want to export several databases using
forms.
With regards to that what is the technique/code I could use to select
the database of my choice for export.
How could we get the name/services of a particular database among
various databases using Forms 6i.
Could some one give me the idea/code to get the above requirement?
Thanks
Amit

Why would you want to use Forms (a client tool) to import or export a database? Imp and exp are command line tools meant to be run on the database server.
You will probably be hitting other problems, like different database versions. For every database version you need the correct imp and exp.
If you really want to use Forms, than just make a table that hold the names of the databases.

Export - Import In ABAP ( for variables and internal table)

how can we pass value for the variable and internal table using Export and Import?
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
data: var type sy-uzeit.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var,sy-subrc,sy-uzeit.
i found var value 0 while importing.
what is the right syntax for passing value of variable and internaltable.
regards,
dushyant.

Hi,
There are two possible solutions.
Solution1:
Program1.Should be run before atleast once so that TIME should be filled.
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
Program2.IF the TIME is filled,then only it will produce the result.
data: var type sy-uzeit.
clear var.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var, sy-subrc, sy-uzeit.
Solution2:
Single program:
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
clear var.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var, sy-subrc, sy-uzeit.
Kindly reward points by clikcing the star on the left of reply,if it helps.

How to export/import the certificates for/from 'Partner company' step-by-step in exchange 2013

Dear EXCHANGE EXPERTS,
I am a newbie in "Exchange World" and I try hard to learn and figure out how Exchange messaging works.
Sometimes the searches for information are gratified with wonderful articles and blogs, but sometimes days of searches bring you nothing but tiredness.
I cannot find a clear information (step-by-step) how to exchange the certificates with the Partner company for TLS mutual communication in Exchange 2013.
I would appreciate the help of experts.
Vi

Hello
"You can do it on several ways. If both organizations are using publicly trusted certificate on Exchange servers, you are good to go. If that’s not the case you will have to cross-import Root CA certificates on both sides. Alternatively, you can also
issue certificates for SMTP for both Exchange organization from a single trusted RootCA. Anyway, the point is that each Exchange server must trust the certificate installed (and assigned to SMTP service) on another Exchange server"
'Trusted Root Certification" -->yes /local computer/
if your company and partner company have a public cert and assigned to smtp service not need do
anything with cert.
if not have public cert but have cert from own internal ca booth company, you need
cross-import Root CA certificates to exch servers and is ok. you send root ca caert to company and partner company send his own root certificate and that inport to local computer 'Trusted Root Certification"
store on exch server.
if not have internal ca only self signed you need send self signed cert
sorry my english

Trying to not save artboard when exporting or using save for web and devices

Hello,
I am using AI CS5 and I am trying to save a logo that is on an 8.5 x 11 artboard. When I try to export or 'save for web and devices', I am getting the entire artboard to be saved - not just the logo like I want. I have never had this issue in CS3, and just started using CS5 so I am not sure if there is a new feature that I need to be turning off to just save the logo instead of the entire 8.5x11 page.
Any help is appreciated,
Kristie

Thanks! It was under the object - slice. You've saved my sanity

Problem exporting video using compressor for a final cut pro vid

I've created a video in Final Cut Pro and trying to export using compressor to apple tv. Each time about half way through it crashes final cut and gives me the 'final cut pro had to quit unexpectedly'.
Haven't a clue what is going on, it happened sometimes when i was trying to conform to HD but when i did it bit by bit it was ok.
All the media is online so really haven't a clue. I've tried using quicktime conversion in pro-res then bashing into compressor and it works but interlacing is all over the shop, even with de-interlace filter.
ANy answers with regards to why its crashing greaty appreciated!
P.S when it crashes says something about a pro-core plugin
Message was edited by: jim__bob

Hi Jim,
Can you update your profile, we don't know what your hardware set up is or your OS, or version of FCS. It could give you answers a lot faster if we know your details from the off.
Ok, what format is your original media, what are your sequence settings please.
DM

Exporting animation using Save for Web and Devices problem

The animation plays as it should when the "Play" button is pressed at the bottom of the "Save for Web and Devices" Menu , but when I Preview it the individual frames don't disappear once they've shown , so you can see them all at the end of the animation . This is also how they save as a .gif ( although using the "Save as html" option reverts to looking as it should , each frame appearing and disappearing in turn) How do I save as gif without this happening?Many thanks for any help

Thanks! It was under the object - slice. You've saved my sanity

How to use lodercli for export import

Hello,
I want to migrate my content server data , that is on SAPDB version 7.3 (32 bit) to new server with MAX DB 7.6. (64 bit) .
I wanted to know:
1) how to do export an d import using lodercli. i wanted to use loder of my new server i.e. MAXDB loder to do the export immport. Can any one tell me the steps and the command to do this ?
2) I have refered SAP note 962019, but need some more help on the steps that is given in this note for hetrageneous copy.
Note : i dont have any SAP system on the server i have only content server and hence i dont have user SAPR3 on database.
Regards,
Bhavesh

> Please check the following (point 7) in note 962019:
Ok...
> 7. The procedure described in this note supports the following migrations:
> and I am dealing with the same situation hence choose the export import rather than normal backup recovery.
Well. it says: the procedure supports these migrations, which is true.
It does not say: "please do use the export/import migration in these situations".
Please do read the note point 1 where it says;
"Homogeneous system copies (backup/recovery) can be executed only in
systems that fulfill the following conditions:
a) The database versions in the source system and the target system
do not differ.
b) The processor uses the same byte sorting sequence (Little Endian
-> Little Endian; Big Endian -> Big Endian).
*If the specified operating system prerequisites are met in the
source and target system, you MUST use the homogeneous system copy
and not the heterogeneous system copy.*"
So in your case export import is not even supported!
> 2) I know the Cs 6.10 is out of support and it need to upgrade to new CS version that is 6.4 , but if i am already installing the new server for content server with CS 6.4 and MAXDB 7.6 why then why cant i use the export import from older server to new server??
> Other wise i need to upgrade the MAXDB then upgrade CS and then take the backup and restore, isnt it more logivcal to do export import using loder as we have all prerequisites available??
1. you don't meet the prerquesites (see above) - you can use backup/restore, so you have to !
2. export/import is a terribly slow and clumsy procedure
3. backup/restore is a easy, safe and fast method to perform the system copy
If you still really, really want to stick with export/import, feel free to try it out.
The note contain all required steps and the documentation for MaxDB even includes tutorials for the loader.
regards,
Lars

How do I keep formatting while importing/exporting from/to excel using Numbers for Ipad

I have an excel file that I export to Numbers on my Ipad. The problem is I lose all of my formatting. I use a lot of linking cells in the excel version of the file. And even when I work on the Numbers version of the file and put in the pop up menus, I lose those when I export to excel. Is there any way to keep this formatting when exporting/importing?
Thanks for the help.

Migintosh, I hadn't thought of that, but turns out that is my problem. I seems when I place the file, indesign in automatically changing those values. Is there a way to force indesign keep those at 0 (or whatever value I want) as I place the text? Right now, what happens is I place the text and then have to select all and manually set the before and after to 0 since indesign decides to change the after spacing to 0.1389.

Export/Import Process in the UI for Variations Content Translation is Generating CMP Files with No XML

We have a SharePoint 2010 Publishing Website that uses variations to deliver contain to multiple languages. We are using a third-party translation company to translate publishing pages. The pages are
exported using the export/import using the UI process described here: "http://blogs.technet.com/b/stefan_gossner/archive/2011/12/02/sharepoint-variations-the-complete-guide-part-16-translation-support.aspx".
Certain sub-sites are extremely content-intensive. They may contain many items in the Pages library as well as lists and other sub-sites.
For some sub-sites (not all), the exported CMP file contains no XML files. There should be a Manifest.XML, Requirements.XML, ExportSettings.XML, etc., but there are none. After renaming the CMP file
to CAB and extracting it, the only files it contains are DAT files.
The only difference I can see between the sub-sites that generate CMP files with no XML files is size. For example, there is one site that is 114 MB that produces a CMP file with no XML files. Small
sites do not have this problem. If size is the problem, then I would think the process would generate an error instead of creating a single CMP file that contains only DAT files. However, I do not know exactly what the Export/Import Process in the UI is doing.
This leads to two questions:
1.
Does anyone know why some CMP files, when renamed to *.CAB and extracted, would not contain the necessary XML files?
2. Second, if exporting using the UI will not work, can I use PowerShell? I have tried the Export-SPWeb, but the Manifest.XML does not contain translatable
content. I have not found any parameters that I can use with Export-SPWeb to cause the exported CMP to be in the same format as the one produced by the Export/Import process in the UI.
As a next step, we could try developing custom code using the Publishing Service, but before doing this, I would like to understand why the Export/Import process in the UI generates a CMP that
contains no XML files.
If no one can answer this question, I would appreciate just some general help on understanding exactly what is happening with the Export/Import Process -- that is, the one that runs when you select
the export or import option in the Site Manager drop down. Understanding what it is actually doing will help us troubleshoot why there are no XML files in certain export CMPs and assist with determining an alternate approach.
Thanks in advance
Kim Ryan, SharePoint Consultant kim.ryan@[no spam]pa-tech.com

I wanted to bump this post to see about getting some more responses to your problem. I'm running into the same problem as well. We're running a SharePoint 2010 site and are looking at adding variations now. The two subsites with the most content take a
while to generate the .cmp file (one to two minutes of the browser loading bar spinning waiting on the file). Both files are generated with a lot of .dat files but no .xml files. I was thinking like you that it must be a size issue. Not sure though. Did you
ever happen to find a solution to this problem?

Note:304522.1 How to Move Queue Tables without using export import

Trying to use the pkg available in Metalink "Note:304522.1 How to Move Queue Tables without using export import"
Using the 10.1.0.x and upwards Package, I'm getting the following error on a single consumer queue table with an xmltype payload:
SQL> exec move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK');
BEGIN move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK'); END;
ERROR at line 1:
ORA-20000: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SYS.MOVE_AQT", line 652
ORA-06512: at line 1
We've tried in multiple environments, always with the same results.
Trace file shows:
*** 2006-11-08 10:06:47.154
*** SERVICE NAME:(SYS$USERS) 2006-11-08 10:06:47.147
*** SESSION ID:(379.954) 2006-11-08 10:06:47.147
qtable move procedure starting execution at 08-11-2006 10:06:47 for queue table XFORM_TEST_INT.INTERFACE_XML_QUEUE
qtable move procedure experienced an exception at 08-11-2006 10:06:47
qtable move error message ORA-06502: PL/SQL: numeric or value error
qtable move procedure ended execution at 08-11-2006 10:06:47
Can anyone help with this? Has anyone used this before successfully (or not successfully). We urgently need this working today to test moving our queue table into a tablespace with a smaller block size for performance reasons in production.
Thanks for the help!
Tony

Thank you,
Yes we've done that. They've confirmed a problem with the links/scripts on the note. The 10.1 and up version was not really 10.1 and up.
As they would not have a new version available in time for the move we needed to perform, we switched our approach to using dbms_redefinition instead.
Thanks for the reply,
Tony

Export/Import using CTS for PI

Similar Messages

Maybe you are looking for