How to use lodercli for export import

Hello,
I want to migrate my content server data  , that is on SAPDB version 7.3 (32 bit)  to new server with MAX DB 7.6. (64 bit) .
I wanted to know:
1)  how to do export an d import using lodercli. i wanted to use loder of my new server i.e. MAXDB loder to do the export immport. Can any one tell me the steps and the command to do this ?
2) I have refered SAP note 962019, but need some more help on the steps that is given in this note for hetrageneous copy.
Note : i dont have any SAP system on the server i have only content server and hence i dont have user SAPR3 on database.
Regards,
Bhavesh

> Please check the following (point 7) in note 962019:
Ok...
> 7. The procedure described in this note supports the following migrations:
> and I am dealing with the same situation hence choose the export import rather than normal backup recovery.
Well. it says: the procedure supports these migrations, which is true.
It does not say: "please do use the export/import migration in these situations".
Please do read the note point 1 where it says;
"Homogeneous system copies (backup/recovery) can be executed only in
systems that fulfill  the following conditions:
a) The database versions in the source system and the target system
    do not differ.
b) The processor uses the same byte sorting sequence (Little Endian
    -> Little Endian; Big Endian -> Big Endian).
*If the specified operating system prerequisites are met in the
source and target system, you MUST use the homogeneous system copy
and not the heterogeneous system copy.*"
So in your case export import is not even supported!
> 2) I know the Cs 6.10 is out of support and it need to upgrade to new CS version that is 6.4 , but if i am already installing the new server for content server with CS 6.4 and MAXDB 7.6 why then why cant i use the export import from older server to new server??
> Other wise i need to upgrade the MAXDB then upgrade CS and then take the backup and restore, isnt it more logivcal to do export import using loder as we have all prerequisites available??
1. you don't meet the prerquesites (see above) - you can use backup/restore, so you have to !
2. export/import is a terribly slow and clumsy procedure
3. backup/restore is a easy, safe and fast method to perform the system copy
If you still really, really want to stick with export/import, feel free to try it out.
The note contain all required steps and the documentation for MaxDB even includes tutorials for the loader.
regards,
Lars

Similar Messages

  • Regarding Distribution Monitor for export/import

    Hi,
    We are planning to migrate the 1.2TB of database from Oracle 10.2g to MaxDB7.7 . We are currently testing the database migration on test system for 1.2TB of data. First we tried with just simple export/import i.e. without distribution monitor we were able to export the database in 16hrs but import was running for more than 88hrs so we aborted the import process. And later we found that we can use distribution monitor and distribute the export/import load on multiple systems so that import will get complete within resonable time. We used 2 application server for export /import but export completed within 14hrs but here again import was running more than 80hrs so we aborted the import process. We also done table splitting for big tables but no luck. And 8 parallel process was running on each servers i.e. one CI and 2 App servers. We followed the document DistributionMonitorUserGuide from SAP. I observerd that  on central system CPU and Memory was utilizing above 94%. But on 2 application server which we added on that servers the  CPU and Memory utilization was very low i.e. 10%. Please find the system configuration as below,
    Central Instance - 8CPU (550Mhz) 32GB RAM
    App Server1 - 8CPU (550Mhz) 16GB RAM
    App Server2 - 8CPU (550Mhz) 16GB RAM
    And also when i used top unix command on APP servers i was able to see only one R3load process to be in run state and all other 7 R3load  process was in sleep state. But on central instance all 8 R3load process was in run state. I think as on APP servers all the 8 R3load process was not running add a time that could be the reason for very slow import.
    Please can someone let me know how to improve the import time. And also if someone has done the database migration from Oracle 10.2g to MaxDB if they can tell how they had done the database migration will be helpful. And also if any specific document availble for database migration from Oracle to MaxDB will be helpful.
    Thanks,
    Narendra

    > And also when i used top unix command on APP servers i was able to see only one R3load process to be in run state and all other 7 R3load  process was in sleep state. But on central instance all 8 R3load process was in run state. I think as on APP servers all the 8 R3load process was not running add a time that could be the reason for very slow import.
    > Please can someone let me know how to improve the import time.
    R3load connects directly to the database and loads the data. The quesiton is here: how is your database configured (in sense of caches and memory)?
    > And also if someone has done the database migration from Oracle 10.2g to MaxDB if they can tell how they had done the database migration will be helpful. And also if any specific document availble for database migration from Oracle to MaxDB will be helpful.
    There are no such documents available since the process of migration to another database is called "heterogeneous system copy". This process requires a certified migration consultant ot be on-site to do/assist the migraiton. Those consultants are trained specially for certain databases and know tips and tricks how to improve the migration time.
    See
    http://service.sap.com/osdbmigration
    --> FAQ
    For MaxDB there's a special service available, see
    Note 715701 - Migration to SAP DB/MaxDB
    Markus

  • How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split

    Hi Experts, I have the follow delivery:
    Item        Material   Deliv.Qty    Un
    10     739911     2     PQT
    And I want to obtain this:
    Item        Material   Deliv.Qty    Un                            Batch
    10     739911     0     PQT
    900001     739911     1     PQT          ZZ00060
    900002     739911     1     PQT          ZZ00061
    But, after using the Bapi I obtained this:
    Item        Material   Deliv.Qty    Un                            Batch
    10     739911     1,372     PQT
    900001     739911     0,314     PQT          ZZ00060
    900002     739911     0,314     PQT          ZZ00061
    So as you can see the problem is with the "Deliv.Qty". I expected:
    Item        Deliv.Qty
    10            0
    900001     1     
    900002     1     
    But I obtained:
    Item        Deliv.Qty
    10     1,372
    900001     0,314
    900002     0,314
    The parameters that I am using in the Bapi are:
    HEADER_DATA                                   
    DELIV_NUMB = 801174646
    HEADER_CONTROL                                
    DELIV_NUMB = 801174646
    DELIVERY = 801174646
    TECHN_CONTROL
    UPD_IND = U
    ITEM_DATA (three records):   
    DELIV_NUMB = 801174646
    DELIV_ITEM = 000010  
    MATERIAL = 739911  
    FACT_UNIT_NOM = 1   
    FACT_UNIT_DENOM = 1   
    DELIV_NUMB = 801174646  
    DELIV_ITEM = 900001     
    MATERIAL = 739911     
    BATCH = ZZ00060    
    HIERARITEM = 000010     
    USEHIERITM = 1          
    DLV_QTY = 1
    DLV_QTY_IMUNIT = 1
    FACT_UNIT_NOM = 1      
    FACT_UNIT_DENOM = 1      
    DELIV_NUMB = 801174646  
    DELIV_ITEM = 900002     
    MATERIAL = 739911     
    BATCH = ZZ00061    
    HIERARITEM = 000010     
    USEHIERITM = 1          
    DLV_QTY = 1
    DLV_QTY_IMUNIT = 1
    FACT_UNIT_NOM = 1      
    FACT_UNIT_DENOM = 1
    ITEM_CONTROL (three records):
    DELIV_NUMB = 801174646
    DELIV_ITEM = 000010  
    CHG_DELQTY = X
    DELIV_NUMB = 801174646
    DELIV_ITEM = 900001  
    CHG_DELQTY = X
    DELIV_NUMB = 801174646
    DELIV_ITEM = 900002  
    CHG_DELQTY = X
    So I am missing something but I don't know what.
    Can any one help me with this please?
    PD: I have looked the following forums in order to use the Bapi:
    How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
    batch split using BAPI_OUTB_DELIVERY_CHANGE
    Re: Help in BAPI_OUTB_DELIVERY_CHANGE(batch-split)
    BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
    Help for BAPI_OUTB_DELIVERY_CHANGE

    Hey,
    My code is for the inbound delivery but it should work the same.
    Give this a try.
    REPORT  z_delivery_batch_split.
    DATA:header_data  LIKE  bapiibdlvhdrchg,
    header_control  LIKE  bapiibdlvhdrctrlchg,
    delivery  LIKE  bapiibdlvhdrchg-deliv_numb,
    ls_return LIKE bapiret2,
    item_data  TYPE TABLE OF  bapiibdlvitemchg,
    item_control  TYPE TABLE OF bapiibdlvitemctrlchg,
    ls_item_data  LIKE  bapiibdlvitemchg,
    ls_item_control LIKE  bapiibdlvitemctrlchg,
    return TYPE TABLE OF bapiret2 WITH NON-UNIQUE KEY type.
    header_data-deliv_numb = '1800005005'.
    header_control-deliv_numb = '1800005005'.
    delivery = '1800005005'.
    ls_item_data-deliv_numb = '1800005005'.
    ls_item_data-deliv_item = '900001'.
    ls_item_data-material = '000000000020067722'.
    PERFORM create_batch CHANGING ls_item_data-batch.
    ls_item_data-hieraritem = '000010'.
    ls_item_data-usehieritm = '1'.
    ls_item_data-dlv_qty = 80.
    ls_item_data-dlv_qty_imunit = 80.
    ls_item_data-fact_unit_nom = '1'.
    ls_item_data-fact_unit_denom = '1'.
    ls_item_data-sales_unit = 'EA'.
    ls_item_data-base_uom = 'EA'.
    APPEND ls_item_data TO item_data.
    ls_item_data-deliv_numb = '1800005005'.
    ls_item_data-deliv_item = '900002'.
    ls_item_data-material = '000000000020067722'.
    PERFORM create_batch CHANGING ls_item_data-batch.
    ls_item_data-hieraritem = '000010'.
    ls_item_data-usehieritm = '1'.
    ls_item_data-dlv_qty = 60.
    ls_item_data-dlv_qty_imunit = 60.
    ls_item_data-fact_unit_nom = '1'.
    ls_item_data-fact_unit_denom = '1'.
    ls_item_data-sales_unit = 'EA'.
    ls_item_data-base_uom = 'EA'.
    APPEND ls_item_data TO item_data.
    ls_item_control-deliv_numb = '1800005005'.
    ls_item_control-deliv_item = '900001'.
    ls_item_control-chg_delqty = 'X'.
    APPEND ls_item_control TO item_control.
    ls_item_control-deliv_numb = '1800005005'.
    ls_item_control-deliv_item = '900002'.
    ls_item_control-chg_delqty = 'X'.
    APPEND ls_item_control TO item_control.
    break cgavin.
    CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
       EXPORTING
         header_data          = header_data
         header_control       = header_control
         delivery             = delivery
    *   TECHN_CONTROL        = TECHN_CONTROL
       TABLES
    *   HEADER_PARTNER       = HEADER_PARTNER
    *   HEADER_PARTNER_ADDR  = HEADER_PARTNER_ADDR
    *   HEADER_DEADLINES     = HEADER_DEADLINES
         item_data            = item_data
         item_control         = item_control
    *   ITEM_SERIAL_NO       = ITEM_SERIAL_NO
    *   EXTENSION1           = EXTENSION1
    *   EXTENSION2           = EXTENSION2
         return               = return
    *   TOKENREFERENCE       = TOKENREFERENCE
    *   HANDLING_UNIT_HEADER = HANDLING_UNIT_HEADER
    *   HANDLING_UNIT_ITEM   = HANDLING_UNIT_ITEM
    *   PARTIAL_GR_OBJECTS   =          PARTIAL_GR_OBJECTS
    READ TABLE return
    INTO ls_return
    WITH TABLE KEY type = 'E'.
    IF sy-subrc = 0.
       MESSAGE ID ls_return-id TYPE ls_return-type NUMBER ls_return-number WITH ls_return-message_v1 ls_return-message_v2
       ls_return-message_v3 ls_return-message_v4.
    ENDIF.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait          = 'X'.
    break cgavin.
    *&      Form  CREATE_BATCH
    *       text
    *      <--P_LS_ITEM_DATA_BATCH  text
    FORM create_batch  CHANGING p_ls_item_data_batch.
       DATA: ls_bncom TYPE bncom.
       ls_bncom-matnr = ls_item_data-material.
       ls_bncom-werks = 'C333'.
       ls_bncom-lgort = '3000'.
       SELECT SINGLE mtart
         FROM mara
         INTO ls_bncom-mtart
         WHERE matnr = ls_bncom-matnr.
       CALL FUNCTION 'VB_NEXT_BATCH_NUMBER'
         EXPORTING
           matnr                          = ls_bncom-matnr
           werks                          = ls_bncom-werks
           check_batch                    = 'X'
           check_material                 = ''
           message_when_auto              = ' '
           x_bncom                        = ls_bncom
           lock_batch                     = ' '
         IMPORTING
           new_charg                      = p_ls_item_data_batch
         EXCEPTIONS
           no_material                    = 1
           no_plant                       = 2
           material_not_found             = 3
           plant_not_found                = 4
           no_batch_handling              = 5
           batch_exist                    = 6
           no_number                      = 7
           illegal_batch_number           = 8
           interval_not_found             = 9
           object_not_found               = 10
           interval_overflow              = 11
           error_automatic_batch_number   = 12
           cancelled                      = 13
           automatic_batch_num_not_active = 14
           OTHERS                         = 15.
       IF sy-subrc = 0.
         CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
           EXPORTING
             wait = 'X'.
       ENDIF.
    ENDFORM.                    " CREATE_BATCH

  • Script request for  exporting, importing, inserting entry to Oracle 9i LDAP

    Do anyone has the scripts for exporting, importing, inserting entry to Oracle 9i LDAP server? Thanks for help.

    you can use ldapsearch utility to generate ldif files. Perform a search on the node you want to export and specify the output to be in LDIF format ( -L - this is a ldapsearch option). Once you have the ldif file, you can import it to any LDAPv3 complaint server such as OID. for OID, use ldapadd/ldapmodify utility to import the data.
    These utilities are present under IAS_HOME/bin or ORACLE_HOME/bin.

  • How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

    How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
    We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
    How can we remove @abc.com
    We are using OID 11g and OAM 11g
    Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
    We are in OID 11g.
    Any help on this greatly appreciated.

    I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
    Thanks,
    Hussein

  • How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

    How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

    The cheap & easy way is to just drag the app to the Trash.
    If you want to get all of the associated files use an app deleting app like the free AppCleaner;
    http://www.freemacsoft.net/appcleaner/
    Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

  • How to use i for if condition in a for i in loop?

    Hi friends,
    I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
    cursor is
    select c1,c2,c3 from table1; -- 100 rows returned.
    open cursor
    loop
    fetch c1,c2,c3 into v1,v2,v3;
    for i in 1..3 loop
    if 'v'||i between 90 and 100 then
    v_grade := 'Excellent';
    elsif 'v'||i between 80 and 89 then
    elsif 'v'||i between 50 and 59 then
    end if;
    end loop;
    close cursor;
    This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
    But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
    Thanks for any advice in advance!

    user508774 wrote:
    Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
    So do not underestimate what can be done in SQL.
    v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
    EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
    SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
    The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
    These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
    Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
    Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
    Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
    The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
    Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
    To create a SQL program with parameters is done by using bind variables. Instead of
    v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
    The following SQL source code should be created:
    v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
    The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
    The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
    In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
    UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
    Where v1 and the others are PL/SQL variables.
    That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
    The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

  • Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

    Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
    I read the forum seeking for anwser and i get confuse
    Thanks for the help and sorry for any inconvenient
    Message was edited by:
    Aku_28
    Message was edited by:
    Aku_28

    I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
    Chapter 14 System Administration Guide: Naming and Directory Services
    Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
    Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
    Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

  • How to use parathesis for OR and AND OPERATOR...

    oracle 10g
    Hi
    Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
    select count(balance) from balanace_tb
    where kk_code in(111,112,113)
    or
    kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
    or
    kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
    or
    kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
    or
    kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
    and
    open_date=20130331

    I assume you're looking for something like this?
    select count(balance) from balanace_tb
    where (   kk_code in(111,112,113)
           or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
           or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
           or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
           or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
    and open_date=20130331
    If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
    Re: 2. How do I ask a question on the forums?

  • Need documents for how to use OAM for APPS DBAs

    Hi All,
    Need documents/pdfs, how to use OAM for APPS DBAs.
    Thanks a lot in advance

    Hi,
    For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
    For 11i version pls chk :
    Oracle Applications System Administrator's Guide - Configuration (zipped)      B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
    --Rk                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to use offset for select-option parameter ?

    Hi experts
    could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters.
    following is my code
    SELECT-OPTIONS: s_prctr  FOR vbsegs-prctr OBLIGATORY.
    here "prctr"  length is 10.
    i'm using two tables  1. vbsegd-bupla
                                    2. vbsegs-prctr
    here prctr+6(4) = bupla.
    "Bupla" length is 4
    SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                                 WHERE belnr = it_vbkpf-belnr
                                                                   AND gjahr = it_vbkpf-gjahr
                                                                   AND bukrs = it_vbkpf-bukrs
                                                                   AND bupla IN s_prctr.  
    the above statement is not working as prctr and bupla lenths are different. here i want to use offset.
    SELECT belnr gjahr bukrs prctr sgtxt buzei FROM vbsegs INTO CORRESPONDING FIELDS OF TABLE it_vbsegs FOR ALL ENTRIES IN it_vbkpf
                                                                WHERE belnr = it_vbkpf-belnr
                                                                  AND gjahr = it_vbkpf-gjahr
                                                                  AND bukrs = it_vbkpf-bukrs
                                                                  AND prctr IN s_prctr.
    this is working as prctr and s_prctr lengths are equal.
    could anybody please help me out in this.
    Thanks in advance.
    regards
    satish

    Below code will work for you.
    SELECT-OPTIONS: s_prctr  FOR vbsegs-prctr OBLIGATORY.
    RANGES: s_bupla FOR vbsegd-bupla.
    s_bupla[] = s_prctr[].
    DELETE ADJACENT DUPLICATES FROM s_bupla.
    SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                                  WHERE belnr = it_vbkpf-belnr
                                                                    AND gjahr = it_vbkpf-gjahr
                                                                    AND bukrs = it_vbkpf-bukrs
                                                                    AND bupla IN s_bupla.

  • Need a quick step by step how to use home share to import 500 songs in my Libruary into my little girls libruary

    need a quick step by step how to use home share to import 500 songs in my Libruary into my little girls libruary; her birthday is today - my five min action item has had me up since 2am - help me not be a failure today

    Hi there,
    So, is your daughter's library on a separate computer and running on the same Wifi as yours? Just need to establish the scenario.
    Cheers,
    GB

  • Low Hit Ratio for Export/Import Buffer

    Hi,
    Do low hit ratio (less than 70%) for Export/Import buffer causes performance issue?
    I didnt get any Note related to this.
    Any help will be appreciated.
    Thanks,
    Saurabh

    Thanks everyone,
    Basicaly all the buffers(Program/Nametab/CUA/Screen/Genric Key/Single record) has hit ratio around 99% , but for export/import buffer its 60%. which is indeed less.
    This is what i intended to ask, if this low hit ratio for export/import buffer has much impact ?
    Any note if anyone remembers?
    Thanks,
    Saurabh

  • How to use stysheet for Swing components?

    Hi,
    Give me a guidence abt how to use Stylesheet for Swing components to crate good looking GUI...........thnx

    thank you for your reply,
    I want to know how many times a component is refreshed. I'm asumming the RefreshCondition attribute gets called everytime a component gets refreshed, hence it could be counted.
    I'm just not sure how to use it.

  • Anyone using PDDocExportUserProperties for exporting PDF to XML

    Hi,
    Anyone using PDDocExportUserProperties for exporting PDF to XML. I am using Adobe PDFL 9.0 to do the same. However, do not find any sample programs or tutorials.
    Please anyone have any samples, do provide.
    -Abhi

    > PDDocExportUserProperties
    Where did you find this method? It's not listed in the PDFL API Reference for 8.1 or 9.

Maybe you are looking for