Export more than 74000 lines from SAP

Dear Sirs,
I have MS Office 2010 and try to export more than 74000 lines but the system didn't allow me. I have following user settings:
Parameter ID
AVE
FBA
FBZ
FCJ
FIT_ALV_AP
FIT_ALV_GL
FO2
FO3
FOP
FZ1
FZ2
FZ5
KME
WLC
GRWE
G_RW_DOCUMENT_TYPE
EXP
Our SAp is 6.0.
Thanks in advance.
Dani

Hi,
upto my knowledge we can export only 999 lines . I am not quite sure
raise a OSS message with SAP and check.
G.Ganesh Kumar

Similar Messages

  • How to export more than 64000 record from SqlDeveloper to Excell

    Hi ,
    my query retrive about 90,000 records and i should export those recodrs to Excell file , but when export finish i just found about 65,000 recodrs in Excell file , is there any way to export more than 65K to Excell file , or split the query result to two files ,
    by the way i'm using Oracle 10G and SqlDeveloper Version 3.0.04 .
    please help me ,

    To handle the xls limit, SQLDeveloper will create one or more new sheets within the file for the additional rows. When you open your worksheet, you should see a tab at the bottom for each sheet created.
    Joyce Scapicchio
    SQLDeveloper Team

  • How to export more than 100 points from waveform to excel

    Hi everyone. Novice here. 
    I'm pretty sure other people had my problem, but I don't know how to word it... and can't find a solution for it... Maybe I just don't understand Labview enough to know what's going on.
    Here's what I'm doing: I have a waveform, and I'm trying to save the data to the spreadsheet.
    Problem: The cap is at 100 data plots (only what's shown on the graph). In other words, I only get data for what the graph holds at the present moment.
    Want: I want more than that - EVERYTHING. If it begins from 0s to 50s, I want all the points (10ms increments, which is done already) on the excel file.
    Can you guys help me? How do I get suck that history out of the graph?
    I attached my labview file (a really simple one), so you guys know where I am.
    Thanks guys!
    Solved!
    Go to Solution.
    Attachments:
    Save to spreadsheet.vi ‏17 KB

    If you are not in a hurry, another option is to save the data as a delimited text file. This will allow you to open it in almost any analysis program, since a delimited text file is the universal file type. A delimited text file is one in which data is stored in columns, separated by delimiters, and rows, separated by lines of text. The delimiter is usually a tab character (file extension .txt), but a comma is common in some industries (file extension .csv). Note that using a comma separator can get you into trouble if using European numbering styles, which use the comma instead of the period as the decimal indicator.
    LabVIEW has several VIs that make this easy for you.
    If you have a single set of homogeneous data and are only writing once (NOT in a loop), then use Write to Spreadsheet File.vi. This VI formats your data into rows and columns, opens the file, writes the data, then closes the file. Since it opens and closes the file, it is not suitable for use in a loop.
    If you are writing homogeneous data in a loop, use the Array to Spreadsheet String function at each iteration to format your array of data to rows and columns, then write using either of the file write primitives.
    If you have inhomogeneous data, such as a timestamp and a few doubles, format the data on a line by line basis and write to disk. The attached example, SImpleLowLevelWriteSpreadsheetFile.vi shows how to do this.
    If you need more speed, you can buffer your data so the blocks of data you send to disk are more optimized. This is a bit more complex, but the attached example, BufferedLowLevelWriteSpreadsheetFile.vi shows how to do it. This will usually give you at least 2X and could be 10X or more speed improvement.
    Have fun!
    This account is no longer active. Contact ShadesOfGray for current posts and information.
    Attachments:
    SimpleLowLevelWriteSpreadsheetFile.vi ‏22 KB
    BufferedLowLevelWriteSpreadsheetFile.vi ‏34 KB

  • Export more than 253 characters from ALV column to excel

    Hi
    I have one problem. In internal table, i have one column which is having 2500 characters. I have to export this column in excel but i am able to export only 253 characters max from alv standard export.  How can i export complete column to excel from ALV?
    Regards
    Manish

    Create a new pf status and add a excel button in the menu. While creating new menu, use the standard SAP menu and just change the excel button. SY-UCOMM would &EXCEL. Use GUI_DOWNLOAD to download the excel or the file. It is not achievable using the standard SAP download option.

  • Export more than  70000 rows to excel in OBIEE 10G

    Hi We are using
    Office 2003 and need to export more than 70000 rows from OBIEE to excel.Is there any way?

    Hi,
    Refer the below link.
    Re: Downloading / Exporting more than 65k records in Excel
    Thanks,
    Satya
    Edited by: Satya Ranki Reddy on Apr 18, 2013 2:41 PM

  • A single table line generating more than 2 lines when exporting to Excel

    Guys,
    I do have an interactive report on apex with a varchar2(4000) column that is generating more than 1 excel row per table row. In another words:
    Table my_report
    file_id number,
    file_comment varchar2(4000)
    Query on report
    select file_id, file_comment from my_report
    It generates 5 lines on report screen but, when I export to excel using csv or xls format, it generates more than 5 lines. On file_comments field on excel, some of them has a break in 2 or 3 lines. Seems to me a line feed problem with CHR(13) or chr(10).
    Anyone as a solution or a similar problem like this? Any idea?
    Andre.

    you could try to remove the linebreaks in the select.
    select file_id, file_comment, replace(replace(file_comment,CHR(13)),CHR(10)) file_comment_nobreak
    from my_reportThen depending on the type of report you could show one column, but export the other column in the excel/csv file. Not sure if this works with an interactive report too.

  • How to delete more than one workbook from command line

    Hi, I'd like to delete more than one workbook from command line:
    The following syntax, it doesn't work....but I followed the manual instructions:
    dis51adm.exe /connect eul/eul@uatdb /delete /workbook "ALE_TEST_1, ALE_TEST_2" /eul eul /log D:\Ale\delete.log
    where:
    eul/eul@uatdb: is the db’s schema/user where the EUL is installed;
    /delete "ALE_TEST_1, ALE_TEST_2": is the command to delete the workbooks, specified inside the “” (with the relative path)
    /log D:\Ale\delete.log: is the command to write a log’s file named “delete.log” to track the action     
    The log file says:
    22/4/2008 4:00:26 μμ
    dis51adm.exe /connect /delete /workbook ALE_TEST_1, ALE_TEST_2 /eul eul /log D:\Ale\delete.log
    Document ALE_TEST_1, ALE_TEST_2 not found in EUL.
    Internal EUL Error: ObjectNotFound - Can't find EUL element
    There are 0 eul elements to be deleted.
    Completed deleting eul elements.
    22/4/2008 4:00:29 μμ
    Anyone can tell me how is the right syntax ?
    Thanks in advance
    Alex

    Hi Rod
    I was coming to that conclusion myself but wanted to wait until the other avenues had been exhausted first - aka making sure of the workbook names.
    I checked through all of the command line documentation and read nothing which clearly indicated that only one workbook could be processed at a time, other than the fact that the syntax says workbook and not workbooks, which could be a big clue.
    I think you are right though in that it has to be one at a time, which would be a pain.
    Best wishes
    Michael

  • INDESIGN GLITCH: Creating an XML file from Indesign Layout - Issue "Using more than one line of GREP" & "Map Styles to Tags"

    I currently create XML from InDesign CC by Mapping Style to Tags.
    - The Paragraph Styles are manually apply to text. These styles include multiple lines of GREP to automatically apply character styles.
    - I map some of the paragraph and character styles to prebuilt tags that have the same name "Map Styles to Tags".
    I have found through trouble-shooting that InDesign is unable to "Map Styles to Tags" for more than one line of GREP. I therefore have to chose which line of GREP to automatically tag and which lines to manually tag.
    Please can anyone help, I need to automatically map tags to at least two character styles in one paragraph via GREP.
    Thanks,

    OK. The best I can suggest is running a Find/Change like this:
    Which will actually apply the character style to the italics (and I would do the bold as well just to make certain). Then run the Map Styles to Tags again, using the Apply by Name. Which will tag the italics.
    I don't know why ID can map to the bold and not the italic character style. It either should do them both (as in this instance) or none at all as the character styles are not actually applied by the grep, just the styling from the character styles.
    Mike

  • Urgent! How to display more than 1 line of text in SAPSCRIPT using tab

    Hi, i would like to know how do i display all the text (which may consist of more than 1 line) that i have extracted using a READ_TEXT FM in my print program? Once the text has been extracted and displayed, i would like the proceeding lines of text (if there are more than 1 line) to begin at a certain margin (i have defined a paragraph format as 6.2cm in tab option).
    Have a look at the part of the print program that has the READ_TEXT FM statements which is going to extract the text from the PR Document header:
    LOOP AT ITAB.
      CLEAR: PR_TXT, PR_TXT[].
      L_NAME = ITAB-BANFN.
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
          CLIENT                  = SY-MANDT
          ID                      = 'B01'
          LANGUAGE                = SY-LANGU
          NAME                    = L_NAME
          OBJECT                  = 'EBANH'
          ARCHIVE_HANDLE          = 0
    *      LOCAL_CAT               =
        TABLES
          LINES                   = PR_TXT
        EXCEPTIONS
          ID                      = 1
          LANGUAGE                = 2
          NAME                    = 3
          NOT_FOUND               = 4
          OBJECT                  = 5
          REFERENCE_CHECK         = 6
          WRONG_ACCESS_TO_ARCHIVE = 7
          OTHERS                  = 8.
      LOOP AT PR_TXT.
        MOVE: ITAB-BANFN TO PTXT_TAB-BANFN,
              SY-TABIX TO PTXT_TAB-POSNR,
              PR_TXT-TDLINE TO PTXT_TAB-LINE.
        APPEND PTXT_TAB.
      ENDLOOP.
    As for my SAPSCRIPT, i did the following:
    *  Purchase Request Header   : &PTXT_TAB-LINE(C)&
    I would like all of the proceeding lines of text to appear at the same margin as when the first line of &PTXT_TAB-LINE& started (which i have found out is 6.2cm, so i created a tab called HT for this)
    Message was edited by: Bernard Loh

    REPORT ZZZZANC9 .
    tables mara.
    data: i_mara like mara occurs 0 with header line.
    select matnr from mara
    up to 100 rows
    into corresponding fields of table i_mara
    where matnr ne space.
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      APPLICATION                       = 'TX'
      ARCHIVE_INDEX                     =
      ARCHIVE_PARAMS                    =
      DEVICE                            = 'PRINTER'
      DIALOG                            = 'X'
       FORM                              = 'ZZZZANC1'
      LANGUAGE                          = SY-LANGU
      OPTIONS                           =
      MAIL_SENDER                       =
      MAIL_RECIPIENT                    =
      MAIL_APPL_OBJECT                  =
      RAW_DATA_INTERFACE                = '*'
    IMPORTING
      LANGUAGE                          =
      NEW_ARCHIVE_PARAMS                =
      RESULT                            =
    EXCEPTIONS
       CANCELED                          = 1
       DEVICE                            = 2
       FORM                              = 3
       OPTIONS                           = 4
       UNCLOSED                          = 5
       MAIL_OPTIONS                      = 6
       ARCHIVE_ERROR                     = 7
       INVALID_FAX_NUMBER                = 8
       MORE_PARAMS_NEEDED_IN_BATCH       = 9
       SPOOL_ERROR                       = 10
       OTHERS                            = 11.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    loop at i_mara.
    mara-matnr = i_mara-matnr.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
       ELEMENT                        = 'MATERIAL'
      FUNCTION                       = 'SET'
      TYPE                           = 'BODY'
      WINDOW                         = 'MAIN'
    IMPORTING
      PENDING_LINES                  =
    EXCEPTIONS
       ELEMENT                        = 1
       FUNCTION                       = 2
       TYPE                           = 3
       UNOPENED                       = 4
       UNSTARTED                      = 5
       WINDOW                         = 6
       BAD_PAGEFORMAT_FOR_PRINT       = 7
       SPOOL_ERROR                    = 8
       OTHERS                         = 9
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endloop.
    CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT                         =
      RDI_RESULT                     =
    TABLES
      OTFDATA                        =
    EXCEPTIONS
      UNOPENED                       = 1
      BAD_PAGEFORMAT_FOR_PRINT       = 2
      SEND_ERROR                     = 3
      SPOOL_ERROR                    = 4
      OTHERS                         = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Look through above code. Sapscript should contain a text element (/E control) as below
    /E   MATERIAL         
       &mara-matnr&

  • More than 1000 Line items

    Hi
    User has done the billing for 1300  line items by using transaction code VF01. After completing that process there is a option TO release Accounting, when user select on that button system throwing an error "Maximum number of items in FI
    reached".
    We know that from FI side system will not allow more than 999 line items. Since we are using 4.7 version.
    Invoice have already send to the customer. So, How to solve this issue.
    Please provide me the solution as early as possible.
    Your help would really appreciated.
    Regards,
    Schilukuri

    Hi to everyone,
    My issue has been resolved.
    My requirement is User has done billing (VF01) for more than 1000 line items. After that he was doing that billing document to release to accounting. That time system was throwing an error message." Maximum number of items in FI
    reached"
    Solution:
    Use Transaction OBCY and give work area VBRK  and there you have to give Table name BSEG and give Field name whichever the fields you want to give to group the same line items.(Document may have some same line items).
    refer SAP Note:36353.
    Regards,
    Schilukuri

  • Outbound delivery more than 333 lines

    Dear All
    while tried to post an outbound through VL02N that contains more than 333 line items system return an error stating that i cannot post in FI more than 999 entries. I am looking to change this from onel FI entry per line item in summary entry. Is there any SPRO config for this or is SAP default?
    Thx a lot Silviu

    Thx for reply.
    There is any option that instead of each line item to post an FI entry, to have the entries with common characteristic summarized (like stock value transferred from DC to stores summarized)?
    In HR, FI-PY posting entries with for same employee, cost center and personell areas has debit items summarized for expense accounts. I am looking for something similar for articles.
    Thx
    Silviu

  • How to transfer data more than 255 char from excel sheet to internal table.

    Hello Experts,
    I have a requirement where i have a text field in the excel sheet of more than 255 char and need to be updated in the text element. To do that i need to transfer the excel sheet data to an internal table where one of the field is more than 255 char.
    in the standard function module it works only upto 255 char. Can you help me if we have some other way to get more than 255 char in the internal table from excel sheet.
    Thanks in Advance.
    BR,
    RaJ.

    Using .xls, it is not possible transfer data more than 255 characters from excel sheet. However if the excel sheet is saved as Comma Delimited format or Tab Delimited format, then using GUI_DOWNLOAD function module data more than 255 characters can be transferred.
    File name should be : .csv (Comma Delimited format)  or .txt (Tab Delimited format)
    File Type would still remain 'ASC' while calling function module GUI_DOWNLOAD
    Also In the internal table declare the field type as String or LCHAR.
    Eg:
    TYPES: begin of ty_file,
            col_a TYPE string,
          end of ty_file.
    DATA: i_file type standard table
                   of ty_file
                 with header line
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      =  'C:\test.csv'
      TABLES
        DATA_TAB                      = i_file

  • How to restrict more than one delivery from one sales order.

    Hi Guys,
    We have a requirement that is, system should not allow more than one delivery from one sales order no even if when there is some line item still to be delivered.
    We want only one delivery for one sales order and rest of line items should be treated as rejected.
    Kindly help
    Thanks in advance,
    Balu

    Hi MP,
    Its also not working as we have the requirement is that once sales order is saved and one delivery is created then again if we are adding some more item inthe same sales order then system should not allow to create delivery document as one delivery already created.
    Thanks,
    Balu.
    Edited by: Balu Sajja on Aug 30, 2010 1:29 PM

  • Finding of materials in scheduling agreement with more than 150 lines

    Dear Experts,
    we are in need to find materials in scheduling agreement with more than 150 lines. In standard SAP, materials can be searched only based on item Nos. is there a way we can search by material in ME38. also we noticed that find icon is greyed out in ME38.
    Please suggest.
    One more request is, to create an uplaod program for maintaining delivery schedules for multiple SAs.
    please sugegst if this is feasible.
    Regards
    Raghavendra MS
    9886138875

    I am also curious if anyone has found a solution to this problem.
    We routinely have scheduling agreements that are hundreds of line items. Users find it difficult to find the line item they wish to work with. It would be helpful if we could search by material number or sort the line items by material.
    As Raghavendra mentioned (ctrl+F) functionality is not available in ME33L or ME38.
    Thanks.

  • How can I print more than 16 lines in an invoice PLD

    Hello, Im currently using SAP 2007 SP1 PL09.
    I cannot print more than 16 lines in my PLD invoice. I have tried making the repetitive area longer, making the end of report and the page footer shorter, I tried setting the "lines in repetitive area" to 50 and I also increased the max rows per page and the only thing that seemed to work was setting the "print with vertical compression" in the invoice print preferences to a value under 100.
    is this the only way I can solve my problem?
    Thanks,

    Hello neito
    Jst increase the height of the layout go to doucment properties change the height there to 1200 and see u can get more than 26 records per page
    Regards Jenny

Maybe you are looking for