How to export more than 64000 record from SqlDeveloper to Excell
Hi ,
my query retrive about 90,000 records and i should export those recodrs to Excell file , but when export finish i just found about 65,000 recodrs in Excell file , is there any way to export more than 65K to Excell file , or split the query result to two files ,
by the way i'm using Oracle 10G and SqlDeveloper Version 3.0.04 .
please help me ,
To handle the xls limit, SQLDeveloper will create one or more new sheets within the file for the additional rows. When you open your worksheet, you should see a tab at the bottom for each sheet created.
Joyce Scapicchio
SQLDeveloper Team
Similar Messages
-
How to export more than 100 points from waveform to excel
Hi everyone. Novice here.
I'm pretty sure other people had my problem, but I don't know how to word it... and can't find a solution for it... Maybe I just don't understand Labview enough to know what's going on.
Here's what I'm doing: I have a waveform, and I'm trying to save the data to the spreadsheet.
Problem: The cap is at 100 data plots (only what's shown on the graph). In other words, I only get data for what the graph holds at the present moment.
Want: I want more than that - EVERYTHING. If it begins from 0s to 50s, I want all the points (10ms increments, which is done already) on the excel file.
Can you guys help me? How do I get suck that history out of the graph?
I attached my labview file (a really simple one), so you guys know where I am.
Thanks guys!
Solved!
Go to Solution.
Attachments:
Save to spreadsheet.vi 17 KBIf you are not in a hurry, another option is to save the data as a delimited text file. This will allow you to open it in almost any analysis program, since a delimited text file is the universal file type. A delimited text file is one in which data is stored in columns, separated by delimiters, and rows, separated by lines of text. The delimiter is usually a tab character (file extension .txt), but a comma is common in some industries (file extension .csv). Note that using a comma separator can get you into trouble if using European numbering styles, which use the comma instead of the period as the decimal indicator.
LabVIEW has several VIs that make this easy for you.
If you have a single set of homogeneous data and are only writing once (NOT in a loop), then use Write to Spreadsheet File.vi. This VI formats your data into rows and columns, opens the file, writes the data, then closes the file. Since it opens and closes the file, it is not suitable for use in a loop.
If you are writing homogeneous data in a loop, use the Array to Spreadsheet String function at each iteration to format your array of data to rows and columns, then write using either of the file write primitives.
If you have inhomogeneous data, such as a timestamp and a few doubles, format the data on a line by line basis and write to disk. The attached example, SImpleLowLevelWriteSpreadsheetFile.vi shows how to do this.
If you need more speed, you can buffer your data so the blocks of data you send to disk are more optimized. This is a bit more complex, but the attached example, BufferedLowLevelWriteSpreadsheetFile.vi shows how to do it. This will usually give you at least 2X and could be 10X or more speed improvement.
Have fun!
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
SimpleLowLevelWriteSpreadsheetFile.vi 22 KB
BufferedLowLevelWriteSpreadsheetFile.vi 34 KB -
How to export more than 5000 SharePoint items to excel?
Need a solution on how to export more than 5000 share point items to excel file.
Hello Chitra,
Option
suggested by soni is valid you can increase threshold limit through CA as well
as you can disable list threshold using PowerShell.
$web =Get-SPWeb
"URL"
$list =$web.Lists[“BIG_LIST_NAME”]
$list.EnableThrottling= $false
But disabling threshold cause performance issue, so as per best practices manage threshold limit according to your requirements
from CA. -
How to show more than one record at a form-like style report?
Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank uHi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer -
How to email more than one photo from camera roll
How do e-mail more than one photo from the camera roll at a time?
Go to the camera roll, open the thumbnails, click on the arrow in the top right, select up to 5 photos, click on share in the top left and select email.
-
How to delete more than one workbook from command line
Hi, I'd like to delete more than one workbook from command line:
The following syntax, it doesn't work....but I followed the manual instructions:
dis51adm.exe /connect eul/eul@uatdb /delete /workbook "ALE_TEST_1, ALE_TEST_2" /eul eul /log D:\Ale\delete.log
where:
eul/eul@uatdb: is the db’s schema/user where the EUL is installed;
/delete "ALE_TEST_1, ALE_TEST_2": is the command to delete the workbooks, specified inside the “” (with the relative path)
/log D:\Ale\delete.log: is the command to write a log’s file named “delete.log” to track the action
The log file says:
22/4/2008 4:00:26 μμ
dis51adm.exe /connect /delete /workbook ALE_TEST_1, ALE_TEST_2 /eul eul /log D:\Ale\delete.log
Document ALE_TEST_1, ALE_TEST_2 not found in EUL.
Internal EUL Error: ObjectNotFound - Can't find EUL element
There are 0 eul elements to be deleted.
Completed deleting eul elements.
22/4/2008 4:00:29 μμ
Anyone can tell me how is the right syntax ?
Thanks in advance
AlexHi Rod
I was coming to that conclusion myself but wanted to wait until the other avenues had been exhausted first - aka making sure of the workbook names.
I checked through all of the command line documentation and read nothing which clearly indicated that only one workbook could be processed at a time, other than the fact that the syntax says workbook and not workbooks, which could be a big clue.
I think you are right though in that it has to be one at a time, which would be a pain.
Best wishes
Michael -
How to save more than 2 records at a time in tabular form?
I have a table name SAMPLE_TABLE, which has SNO,NAME items and one sequence name is SEQ_SAMPLE.
i have one form based on SAMPLE_TABLE. my form is in tabular format, which has 5 records.
in the layout wizard only NAME is displayed. SNO doesnot displayed.
in the layout wizard, there is one push button named as SAVE.
the code of SAVE button(When_Button_Pressed) is
insert into sample_table values(seq_sample.nextval,:sample_table.name);
clear_record;
commit;
my problem is :
when ever i want to save one record at a time there is no problem.
if i want to save more than 2 records at a time then sequence number is alloted for last record. other records have no sequence numbers.
for example i want to insert 2 names as XYZ,PQR then
the table look like this:
sno name
1 PQR
XYZ
if SNO is primary key then it doesnot work because of null value.
can any one solve my problem?
Thanks
MeegadaIs the block a database block or a control block,
1. if database block, assign the primary key on a
trigger like new record instance for each record
enteredour's is a control block, ididnt get your point clearly
could you make it clear how to assign a primary key on a trigger
our criteria is we are having two block as lov_values and lov_name
lov_values:
lov_values_id (sequence generated)
lov_id will be same for the all the values for a particular lov_name
lov_values will be which we enter in the form which will be the only visuble colums on the form
lov_name block:
lov_name
lov_id(sequence generated)
could you help me with the code
thanks
prasad -
How to return more than one value from a function
hello everybody,
Can anyone tell me how to return more than a single value from a function, the problem is i have 4 points,
2 points form one line ,another 2 points form 2nd line ,each point is 3 dimensional(x,y,z coorinates) so i will pass these values to func(x1,y1,z1,x2,y2,z2,x3,y3,z3,x4,y4,z4), i will find the point of intersecton of two lines and i will get it as x,y,z , now how to return these 3 coordinates,usually the function returns only one value, please help me to solve it out.
Thanks.I think the easiest way or trick here is (easiest isn't always the best as we know, but atleast this one will work) to create simple data array. and pass that. Create an array with:
<code>
class justArray {
int x=0
int y=0;
int z= 0;
...somewhere
justArray[] points= new justArray[4];
points[0].x= ..
points[0].y= ..
points[0].z= ..
points[1].x= ..
return points[]
</code> -
How to return more than one record through OUT parameter in procedure
Hi,
I want to create a procedure which accepts one input and returns more than one record as output.
example:
Input = DeptNo
Output= Empno,ename,sal,comm,job
Scenario:
There can be more than one employee in department we pass as the IN parameter. OUT parameter has to return all the records of the corresponding employee details in that department.
Thanks in advance for your help
Regards,
K.Vijay-- I think you can try something like this using ref cursor:
-- create a package for the type ref cursor and execute
CREATE OR REPLACE PACKAGE PACK_REFCURSOR_FOR_TABLES AS
TYPE DATA_TableRows IS REF CURSOR;
END;
-- after executing the package above, create your procedure:
CREATE OR REPLACE PROCEDURE GET_EMP (
IN_nDeptNo IN number,
OUT_Emp OUT PACK_REFCURSOR_FOR_TABLES.DATA_TableRows)
IS
BEGIN
-- leave query open (implicit) as this will return data
OPEN OUT_Emp FOR
SELECT *
FROM tblEmp
WHERE DeptNo = IN_nDeptNo;
END;
--execute the procedure and you're done -
How to import more than 2k items from Excel(2010) to SharePoint 2010 List?
Hi,
I am getting error while importing more than 2k items from Excel to SharePoint List.
Need solution!!Hi.
Try to use the Import Spreadsheet list template to import your data.
http://www.dummies.com/how-to/content/import-a-spreadsheet-as-a-list-in-sharepoint-2010.html
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it. -
How to restrict more than one delivery from one sales order.
Hi Guys,
We have a requirement that is, system should not allow more than one delivery from one sales order no even if when there is some line item still to be delivered.
We want only one delivery for one sales order and rest of line items should be treated as rejected.
Kindly help
Thanks in advance,
BaluHi MP,
Its also not working as we have the requirement is that once sales order is saved and one delivery is created then again if we are adding some more item inthe same sales order then system should not allow to create delivery document as one delivery already created.
Thanks,
Balu.
Edited by: Balu Sajja on Aug 30, 2010 1:29 PM -
Export more than 74000 lines from SAP
Dear Sirs,
I have MS Office 2010 and try to export more than 74000 lines but the system didn't allow me. I have following user settings:
Parameter ID
AVE
FBA
FBZ
FCJ
FIT_ALV_AP
FIT_ALV_GL
FO2
FO3
FOP
FZ1
FZ2
FZ5
KME
WLC
GRWE
G_RW_DOCUMENT_TYPE
EXP
Our SAp is 6.0.
Thanks in advance.
DaniHi,
upto my knowledge we can export only 999 lines . I am not quite sure
raise a OSS message with SAP and check.
G.Ganesh Kumar -
How to update more than one records at one time
hello guys..
how to update a few records (more than one) with different
IDs at the same time? i tried to make a query like this (see
below), but only one record (more than one data in the same
field)has been updated.
<cfquery name="rec" datasource="DatKoku">
select *
from tbl_pilih
where id_pel = '#form.idpel#'
</cfquery>
<cfquery name="updtrecord" datasource="DatKoku">
update tbl_pilih
set
kptsn = '#form.suk_pil#',
trkh_kptsn =
'#Dateformat(TodayDate,"dd/mm/yy")#|#TimeFormat(Now(),"hh:mm:ss
tt")#'
where id_pel = '#rec.id_pel#'
</cfquery>
<cfquery name="outputrecord" datasource="DatKoku">
select *
from tbl_pilih
where id_pel = '#form.idpel#'
</cfquery>Take the query,
<cfquery name="rec" datasource="DatKoku">
select *
from tbl_pilih
where id_pel = '#form.idpel#'
</cfquery>
If every row in the table has a distinct id_pel, then what
you ask is actually an impossible question. It will have no answer.
Distinct IDs imply that the resultset will contain
at most one distinct value of id_pel. That means, there can
be at most one row that satisfies the condition,
where id_pel = '#rec.id_pel#' in the update query. That in
turn means the update query can update at most one row at a time.
If, however, the resultset of
rec consists of multiple rows, it will mean that there are
multiple rows in the table that have the same
id_pel . Then, your update query,
updtrecord, should update all the rows that share that value
of id_pel. -
How to display more than one Record in a Loop
Hi ,
This procedure will return more than one data .
so please tell me how can i write a loop to display all the records of a Table .
This is my procedure :
create or replace procedure getEmpName
V_EMPID IN employee.EMPID%TYPE,
V_EMPNAME OUT employee.EMPNAME%TYPE
is
begin
select empname into V_EMPNAME from employee where empid='2';
end ;
This is my block : How to write a loop here to display all records of my Table
declare
v_EMPNAME EMPLOYEE.EMPNAME%TYPE;
begin
getEmpName(2, v_EMPNAME);
dbms_output.put_line(v_EMPNAME);
enduser10503747 wrote:
so please tell me how can i write a loop to display all the records of a Table .hi,
given procedure will display all records of emp table...
CREATE OR REPLACE PROCEDURE Testloop
AS
CURSOR test1
IS
SELECT EMPNO, ENAME FROM EMP;
BEGIN
FOR i IN test1
LOOP
DBMS_OUTPUT.PUT_LINE ( 'Emp - '||i.empno ||'-'||i.ename );
END LOOP;
END;
Thnx
MB -
How to get more than 1000 rec from Oracle?
Hi
i got this issue from 1 of my fnd.
can any one tell me how to over come this issue?
I need help in solving the issue
This is the oracle error coming when we try to export
the records to the excel sheet.
Macromedia][Oracle JDBC Driver][Oracle]ORA-01795:
maximum number of expressions in a list is 1000
This error is due to the limitation in oracle db list
query.
example:
select * from FEEDBACK_IN Where feedback_in.case_id
IN ( (param 1) , (param 2) , (param 3) , (param 4) ,
(param 5) , (param 6) , (param 7) , (param 8) , (param
9) , (param 10) , (param 11) , (param 12) , (param
13)……………………….(param
5000))
If the list exceeds 1000, we will get the following
error from the database. And there is a limitation in
oracle db to 1000.
We need to rewrite the query to avoid the list error
if the list exceeds more then 1000 records.You must work with the guy who asked the same question
yesterday.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=6&threadid=1149324&ente rthread=y
Maybe you are looking for
-
Spool get lost while job runs in background
Hi We wrote a custom program where in we use two custom bapi's which were copied from original bapi's. When we run this interface program in backgroud, we have lost the spool. But when we run the test with limited data in foreground, it works fine. W
-
Compound boolean condition in ISE?
Hello In ISE I have to define a complex condition as a requirement for an authorization policy. Like this: (member of group X) AND ((wlan id 1) or (wlan id 2)) Can this be done? I can see that I can enter multiple conditions but there is only one AND
-
CRM BP Migration - telephone and Fax data not posted
Hello Experts, I am having an issue while posting a Contact using IDoc in CRM 7.0, the contact is created, all data is ok, email is posted, but fax and telephone information is not posted. Have anyone faced this issue and now how to solve this? Thank
-
Including a cgi app in a UIX page
Hi there, I have the following problem: I'm busy working on an UIX application that has to connect to a Geographical-system (geographical ) called Mapserver. Mapserver generates maps through cgi. I want to include the output of this cgi (the map) int
-
Trackpad will not swipe or scroll
Today is the first day my trackpad won't swipe or scroll. The cursor will move and I can click, but it won't perform any other options. I have changed the batteries, shutdown the computer, when I look at preferences and trackpad, it says no tr