Export out of DRM/Import into PeopleSoft

Hello,
Do any of you have experience creating an export out of DRM to go into the PeopleSoft system to create trees? The PeopleSoft system has a Tree Import; however a file needs to be in a certain format for the Import to work. I wasn't sure if DRM was capable of creating a file in the correct format that PeopleSoft needs or if DRM should just export it's tree data and let the formatting be done by a different tool (ETL, App Designer, etc.). We are on version 11.1.1.2.103.
Below is a high-level example of what the Tree Import file should look like. The 999 lines would be the header lines, and each of the lines underneath the header has a different format (which is fixed-length).
999TREE_VERSION
Tree Version Data
999TREE_STRCT
Tree Structure Data
999TREE_DEFN
Tree Definition Data
999TREE_USERLVL
Tree Level Data 1
Tree Level Data 2
Tree Level Data
999TREE_LEVEL
Tree Level 1
Tree Level 2
Tree Level N
999TREE_USERND
Tree Node Data 1
Tree Node Data 2
Tree Node Data N
999TREE_NODE
Tree Node 1
Tree Node 2
Tree Detail 1
Tree Detail 2
Tree Node 3
Tree Node 4
Tree Node N
Tree Detail 5
Tree Detail N
Thanks in advance for any help you can give me!

how much i understand below are some points:
1- for tree format can be used DRM Export option tabbed output(Export-Style-Tabbed output).
2- For fix length attribute could possible to use Export- Target-Fixed width
you need to do some workaround to generate file as per peoplesoft requirement. Like Different -2 exports as per 999* header lines to meet requirement , hard code header if needed , club all exports in Book to generate one single file.
Please explain more on file format so that can try to help you better.
Thanks!
Sandeep

Similar Messages

Export from PO desktop / import into Outlook ... HOW?

PalmOne Centro
Windows Vista Home Premium
Outlook 2010
iTunes (latest vestions)
iPhone 3gs
We’ve been trying to export PalmOne desktop info (contacts; calendar; memo) over into our iPhone.
We are not in possession of the Centro phone any more; but we have all the info on a computer.
After multiple efforts and attempts, (including going out and buying our own authorized copy of Outlook, expressly for this purpose) we took the computer and everything into the AT&T store Saturday, being told they could probably assist with the export/import; but after giving it a try, they decided they were unable to help, and suggested we take the operation to the nearby Apple store; we did; a technician there spent a good deal of time working on it.
He concluded that the only option we could use to export PalmOne desktop data into Outlook is to choose “Export to Vcard”; but when doing this, he was only able to transfer one contact at a time. He was unable to find a way to export a batch .. or do a global command .. or select all …etc., etc.
How do we export our contact list [altogether] from PalmOne Desktop into Outlook?
I understand it must go into Outlook first, then into ITunes, and then finally, it can be imported into the iPhone which is already synched to our computer).
A website I found describes the operation differently; advising selection of the “export” option and opening the *.csv file in Excel; the importing it into Outlook; tried many, many different options and selections … what opens up in Outlook is garbled and incomplete.
So that was of no use.
Thanks for any help!
Post relates to: Centro (AT&T)

I just purchased an iPhone and had similar frustrations. Despite selecting all my contacts only the first contact was included in the vCard export. In fact, even when I exported in CSV or text formats only the first contact was included in the export. I tried over and over with similar results.
I was using Palm Desktop v6.2.2. I even deleted and reinstalled it. no luck. I have a fairly new computer running Windows 7. I then tried on an older computer with Windows XP and it worked just fine. I was then able to simply send an email to myself with the vCard file as an attachment. I opened the attachment on the iPhone and clicked on the vCard attachment ... a few more clicks and the contacts were imported.
The key is that Palm Desktop does not export correctly with Windows 7 nor (it appears according to anvanho's experience) with Windows Vista. By the way, another thing that didn't work - I installed Palm Desktop using XP Mode running in Windows 7. the Desktop installed OK but I couldn't get my Centro to sync using XP Mode.
Good luck

Odd frames added to start of audio export from LPX when imported into FCPX

Running into a weird issue exporting audio out of Logic Pro (10.0.6) for import into FCPX (10.1.1) - Logic is introducing extra frames (varies between 2 to 4 frames) at the front of exported audio, becomes detectable when imported back into FCPX.
I do a lot of work where I sync music performances on camera that are recorded in audio and MIDI, and have to deliver remixed audio with picture AND a .MID file that all sync. Workflow used to be shoot video on a C100 and another DSLR with either an audio feed or live mic patched to the camera, while Logic recorded the MIDI performance and any ambient audio via separate mics and pres. Shoot always had some kind of "slated" start marker on camera, in camera audio, and in Logic. Camera edits were edited in FCPX, exported as a Quicktime with the "slate" for a start marker, then audio and MIDI handled in Logic.
This always used to work thru to last fall, when we took a hiatus.
Upon resuming some final shooting in the last two weeks, our audio edits are always running 2-4 frames behind FCPX. It's a consistent offset for an entire export (so there's no drift, no jitter within the files - but the slate tones might be 2 frames and 17 subframes behind and the whole audio file runs behind.) Another export might be 3 frames 2 subframes behind. Always kind of random in the amount of drift - but never more than 4 frames.
Tried a test where I imported just the camera audio in Logic as an extracted audio track, then exported same audio file back to the Quicktime but left the original audio in the video - Logic's exported audio ran behind sync from the original.
Obviously, I'm paying attention to frame rates, sample rates, etc.
As a test, I exported an XML out of FCPX, imported it into Logic, performed some edits, and used the File>Export>Project to FinalCut Pro XML - so everything matched across the board. Opened the export in FCPX - audio ran behind sync again.
If it was just audio I was concerned about, I'd just line it up in FCPX and call it done - but my exported MIDI file NEEDS to be in sync with the picture AND the audio... and wasting time calculating the Logic offset error is a huge detour from getting this work done quickly.
I thought maybe there could be a plug-in issue, but it happened even in the extracted audio from the Quicktime with no plug-ins in any of the signal chains.
Any ideas?

Well… here's a clunky workaround.
It's either a problem with the exported FCPX-XML or the way Logic Pro X interprets the XML.
The simple test here was to put a clip in the FCPX timeline and export it as an AIFF and then export an XML too.
Import the XML into Logic, then import the AIFF as a new track. By default the Logic project is 120BPM. By analyzing the xml-based track and the aiff track, the xml track has an added 164 ticks to the beginning of the referenced video-audio.
Move the playhead to zero, zoom in to the timeline and drag the tick field to 164 then blade all your tracks, then click/drag the bladed tracks to zero. Voila!
It seems to only affect the first audio file. So for example, when I have 10 video clips in my FCPX timeline, only the first audio clip has the added 164 ticks.
Now on to the next challenge…
It's not enough to just de-compound your clips because L and J cuts get referenced to the VIDEO, not the audio underneath.
So… In FCPX you MUST select each clip and choose Break Apart Clip Items from the Clip Menu. Perhaps this is old news but thought I'd mention it here in case others were having problems.
Let's hope Apple steps up their xml game and realizes that when I choose export XML-Audio from the xml popup menu… I want it to send the duration of the audio, not the duration of the attached video.
Ergh! Well… as my friends say… "We're still in the stone age with all this technology."
Happy editing all!

Is it possible to export user settings and import into same environment?

Hi guys,
I exported a user profile settings into a file and triedd to import saved file into same environment where I exported, but I am getting following error
"Login name already in use"
I followed the same process for restoring groups.Exported groups into a file and imported saved file into same environment, I was successfully restored thr groups.But I am failing to restore the user settings.
Any help or suggestions on this issue is greately appreciated.
Thanks in advance!

Importing into the same environment is not supported.
Instead, you could create all the test users in production with all the roles and then deactivate the user, so they are not usable.
After you overwrite the non-production DBs with the production DB, you could then run a script (you will have to create it first) to activate all the users.
Will this work for you?
Segal

Export from Thunderbird and import into OS X Mail

Hi guys,
I'm growing tired of Thunderbird and I want to go back to OS X MAIL.
Problem is : it doesn't import properly.
Here's what I've done :
In OS X MAIL, I select IMPORT and then THUNDERBIRD and finally select the THUNDERBIRD PROFILE FOLDER in my LIBRARY.
It does work and import emails... but not all of them.
In fact, it does not import several local mail folders I have in Thunderbird.
So that's quite a big problem since i need those folders and the emails within them.
I've looked in Thunderbird for a way to export a clean file, but it doesn't seem like there's even an export feature ?
Anyway can give me a helping hand ?
Thanks !

So that's what I did.
I took the files in Library/Thunderbird / ... under my profile
I dumped the .MSF files, and renames the other files to .MBOX
Then I used the IMPORT function in OS X MAIL
It seemed to work and I was quite satisfied !
Until I double check... and realised that a LOT of emails had not been imported, for reasons that I do not quite understand...
So if you know why, please help !!!!!

Has anyone successfully exported OAS9i r1 and imported into 10g r2

I have several portal applications in 9i as Rel1 that need to be ported over into 10g AS R2. NEED Help!! any suggestions.

Please check out the forum: Portal General for more specific Portal help
Oracle Application Server Portal
Martin

When either exporting from Lightroom or importing into Merge to HDR Pro in Photoshop

the color space changes from ProFotoRGB to srgb - how do miantain the colorspcae throughout the whole process? Never had this problem in Photoshop CS6 or using any other software to edit HDR

My CS5 is up to date but my LR 4.3 isn't. I'm updating it now.
I can't find a way to check for updates for the Nik Collection. If updating LR doesn't work I will try uninstalling and reinstalling Nik.

Export from Oracle 9i to be Imported into Oracle 10g on 32bit platform

Hi,
Currently, I am in the process of performing a Homogenous system copy
due to a domain change in our organization using R3load procedure.
I have taken the export of the existing system which is on Oracle 9i.
Initially, I was planning on setting up the new system on Oracle 9i,
now that Oracle 9i is out of support, I would have to go with Oracle
10g.
I found a note on this topic, SAP Note: 932722, however, this note
explicitly talks about database specific procedure of system copy and
also this note is for 64 bit platform.
Can you point me towards a Note or documentation which can be used as
reference for importing an Oracle 9i export into Oracle 10g on 32bit
platform(System copy procedure is R3load)?
OS- Windows 2003 32bit, ECC 5.0
Regards,
Vishnu.

Hi Gagan,
Thanks for your response,
As per your suggestion, I looked at the System Copy guide for Heterogeneous System Copy,
On service.sap.com/osdbmigration under FAQ's this is what I found,
I plan to copy my SAP system to a new hardware with the same OS and DB products but higher release levels. Is this a migration or a homogeneous system copy?
A change of the version of the operation system and/or the database system is not relevant in the context of a migration or a homogeneous system copy. If you don't change the product, but only the release level it is a homogeneous system copy. If you change OS and/or DB, it is a migration.
The system copy guide, doesn't explicitly talk about an export from Oracle 9i imported into Oracle 10g.
Can you point me to a guide or Note?
Regards,
Vishnu

Stills Resolution - Photo Browser vs. Importing into Event

All,
I am preparing a slideshow with photos of varying size. I manage my photos in Aperture and usually use the photo browser in Final Cut Pro X to access them. Some of the photos are low-res (0.1 MB 286 x 369 pixels, for example). If I bring the example photo into my project via the photo browser, the resolution is cut in half (143 x 184). If I import the photo into the Event Browser and add it to the slideshow the original resolution is preserved. Its obviously an easier workflow to use the photo browser but many of the photos I am working with are of poor quality to begin with so I don't want to have to first export from Aperture then import into FCPX. Does anyone know why I am seeing this behavior?
Thanks very much,
Peter
MacBook Pro 2.53 GHz Intel Core 2 Duo/8 GB 1067 MHz DDR3 RAM/NVIDIA GeForce 9400M 256 MB
Mac OS X Lion 10.7.3
Final Cut Pro X 10.0.3

andynick wrote:
pdvachon wrote:
If I bring the example photo into my project via the photo browser, the resolution is cut in half (143 x 184).
You're probably transcoding to Proxy.
This halves the size of the imported media.
Andy
That's what I thought at first, but that is not what I see in my machine.
I set the playback to proxy media, and in the Proxy Media folder I get an alias to the original file (sitting in the Original Media folder, naturally), so even using proxy does not halve the dimensions of the still image.

Bulk Import into contact list error.

Hi,
We are testing out the bulk import into contact list feature and we are getting an error that we can't resolve. We followed the directions from the documentation http://topliners.eloqua.com/docs/DOC-6918
Here's the sample request we are making:
URL: https://www02.secure.eloqua.com/api/bulk/2.0/contacts/imports
Request Header:
Authorization: [our token]
Content-Type: application/json
Request Body:
"name": "test",
"fields": {
    "emailAddress": "{{Contact.Field(C_EmailAddress)}}"
"syncActions": [
      "action": "add",
      "destination": "/contacts/lists/63"
"identifierFieldName": "emailAddress",
"isSyncTriggeredOnImport" : "true"
Response Body:
    "failures": [{
        "field": "destination",
        "stackTrace": [{
            "field": "syncActions"
        "value": "/contacts/lists/63",
        "constraint": "ML Statements must have a ContactList root (see http://topliners.eloqua.com/docs/DOC-4298 for details) (when action = add)."
Is there a step we are missing?
Thanks for the help.

Hi Benny,
In syncActions, instead of: "destination": "/contacts/lists/63", please try: "destination": "{{ContactList[63]}}".

Application ID reserved error upon import into workspace

I have two workspaces, development and production, in one APEX (3.0.1) environment on 11.1.0.6.
I have two applications, one 1 page long and one 33 pages long. The 1 page application is an anonymous login with a jump button to the login page of the 33 page application.
I normally export from development and import into production to make an upgrade of the applications. I can do this successfully with the longer application, upon import I ask to replace the target workspace application ID. When I try this with the 1 page application, I get an error about the application ID being reserved.
The application IDs are normal numbers.
33 pages - development workspace/appl id 107 ==> production workspace/appl id 111 - Works
1 page - development workspace/appl id 119 ==> production workspace/appl id 121 - Fails
Luckily the problem is on the 1 page application. I just redo the edits from development in production.
Any suggestions how to resolve the error so I don't have to re-edit? I'm fearful that it may start happening on the bigger application. That will not be an easy one to re-edit each time I have a release.
Thanks,
Ed

I solved this but I don't know how I caused it.
In the export repository in the target workspace, the Application Exists column had a check. I deleted the row from the repository, and I was able to import into the workspace and change the application number to the one which matched the Application Exists number.
How I got that check mark to show up is a different story. I can't remember doing anything to cause that. Maybe it was the initial import of the application to that then unused number? At least I know how to fix it now.

How to export photos from 3.5.1 library and import into 3.4 library and retain faces and location info

i foolishly upgraded my imac to mavericks. then a few days later when i opened my aperture libraries it asked me if i wanted to update them and that i wouldnt be able to read them in an older version of aperture. i foolishly didnt think much of it because i presumed that i would be able to upgrade my aperture application on my macbook pro. so now my mac book pro is virtually obsolete because it can no longer work on my photo files.
I have since decided that i dont like mavericks because my imac continuously crashes, which it never did before i did the upgrade. so i have decided to
revert back using an old time machine back up. the problem is that the back up that i need to use is over 3 months old because ive been away for 3 months
taking photos and i did the upgrade when i got back home. i have now got 3 months of photos on the new 3.5.1 library that have all been processed, faces locations, edits and filed.
so i now need to export them out then re import them into an old library but i cant seem to export the faces info.
any help would be greatly appreciated.

The Aperture "Preferences > Export" pane has an option "Include Faces Information in exported photos".
Have you enabled this option?
If enabling this option does not suffice, you could tag the photos in each "Faces" stack with a unique keyword. Keywords will be exported, and this would help to restore the Faces tags quicker, because you could create smart albums based on the keywords.

ProRes 422 (HQ) QT Export out of FCP getting error on re-import

The quicktime exports I'm producing out of my FCP system need renders when I drag them back into the project, into a seq. with the same exact settings they had on export. Even if I drag my export into the same sequence it was exported from!
I'm trying to export a self-contained QT with current settings from a Pro Res 422 (HQ) 1920 x 1080 50i Sequence .
On creating a new sequence, I select the sequence preset Apple Pro Res 422 HQ 1920x1080 50i, then cut in the media-- the media is a 90 min Pro Res 422 HQ quicktime from an online house, also 108050i.
Predictably, no render required. The frame rate, frame size, pixel shape, field, codec match between the media and the sequence.
However, if I export out of that sequence (using File – Export Quicktime; Self-Contained, Current Settings), then re-import the Quicktime and put it back in that same sequence or another new sequence with the same preset settings, it needs picture render. This is only if my export selection from the sequence is at least a few minutes long. If I set an in and an out for a :30 sec selection and export that quicktime, I can play that back in the sequence with no render.
The fact that there's some difference between a 90 minute export from my computer and a 30 second export from my computer could be a clue.
Additional info-- I have tried creating a new sequence with the wrong settings preset to get the FCP prompt "would you like to conform the sequence settings to match the file?" Then I click yes to conform settings and my quicktime export goes into the sequence-- with a red render bar. But if I then cut in the Pro Res HQ QT from the post house it will not need a render. These two QTs appear identical when I compare their item properties in FCP. On playback, in the viewer window, my export will appear a little stuttery.
Can anyone tell me what this means and if I can export a quicktime that does not need to be rendered to be played back in FCP?
Many many thanks!
I'm running FCP 6.0.5 on a 2 x 2 GHz Quad Core with 11 GB Ram. Mac OS 10.5.6. I have media running off of 2 external drives, connected via eSATA. Drive Speed on the externals-- need to double check.

The Error I referred to in the title -- I am getting the message "clip settings do not match any sequence presets" when I try to cut my export into a sequence. Seems bizarre because it just came out of a sequence preset, not a custom sequence, using "current settings."

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

Image sequence of jpegs import into Premiere Pro CC 2014 out of sync!

Ever since I left CS6 to CC 2014, image sequences as jpeg files do not properly import into Premiere in sync anymore. I use Blender 3d to export render scenes as jpegs then convert them to h.264 mpeg4 video clips in Premiere. What happens is that the images upload into Premiere's project tab out of order, even though they are correctly ordered in my hard drive. Improper naming conventions are probably ruled out since their files extensions are _000 types, and I never had a problem importing sequences in CS6 anyways. Still image default duration is set to 1 in the general preferences. Does anyone know what is suggest? Thanks.

Good point, I am importing as separate jpegs each set to one frame, so it's not an image sequence as I thought.
My indeterminate media timebase and sequence are the same (29.97fps), though I have to say that even if they were different I don't see why that would be a problem.
Here is a screen shot of my images just after uploading them into the project tab, it is seen from first to last that file numbers appear out of order such as 066, 054, 072, 058...ect:
Is there anything else I could try?

Export out of DRM/Import into PeopleSoft

Similar Messages

Maybe you are looking for