Export P2 project....

I've not done that much work with P2, but I'm starting a big project with all the files coming from P2 cards.
When I finish, we need to export out to tape. Will CS3 or CS4 export a P2 project out to a DVCPRO HD deck, and if so will I need anything extra or do I just need to plug the deck into the firewire port and roll the project off? I'm thinking that non-MXF DVCPRO HD is not native to PPro - correct?
My other option (I'm thinking) would be to get a Blackmagic or AJA card and use that to export out to tape. The project needs to ultimately go to D5, and finding a deck locally for rent is proving to be somewhat problematic so I was thinking about going to DVCPRO HD tape, then send out for transfer.
Any advice?

It's going to be shown in theatres for a one-night only performance, and CineMedia (the company that does the distribution) said that D-5 is what they need the final master on. I think they then convert it to something that can be sent out to all the theatres.
I thought about doing what you do, Craig - export out a group of QT files (the total run time will be around 90 minutes), then just export them into the Smoke system that's hooked up to one the D-5 decks I found we could use at our local PBS station.
I guess I'm trying to find something easier - can I roll off to a DVCPRO HD deck through firewire?

Similar Messages

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

When I Try To Export My Project, Nothing Happens

So during editing in Final Cut Pro X I noticed that there were a couple of hiccups in my movie, but scrolling over these events didn't reveal a problem. I decided to see if it was a processing problem by exporting my project. I went up to File, clicked on Share, clicked on Apple Devices 720p, clicked on Next in the window that came up, titled the project, set it to save to the desktop, clicked Save... And then nothing happened. I checked my desktop for the file but there was nothing there. I've tried saving the file to several different places but when I click Save nothing happens and the file isn't in the place it should be if it had been saved. FCPX is working fine in all other regards but it's just not exporting this project. I've checked and I don't have any broken pieces of footage. The only possible thing I can think of is the song I'm using is one I purchased off of iTunes, so maybe it won't let me export if the song is protected by iTunes, but that seems like a stretch. Any help is appreciated.

Nevermind, I solved the problem. FCPX isn't showing me that it's rendering or whatever it's doing, but after about ten minutes the files show up. Still, any idea why it gives no indication that it's working?

How can I export a project on an external drive in the latest version of iMovie?

Before the latest release of iMovie I easily managed to export a project on an external usb drive and re-import such project on a different Mac... In the latest iMovie version, however, I cannot see my drive any more..
So, how can I export a project on an external drive in the latest version of iMovie?
Thank you in advance

I'm not sure this is the best way, but you could create a new iMovie Library, move your project to that Library, then close the library. Then move the Library to your USB drive. Then, on the other Mac, in iMovie open the Library.

How is the best way to export my project with clips and videos?

I would like to save my project and export the project with clips and videos included. What is the best way to do it?

Can you clarify:
clips and video
Seems as though you want to retain the original media?
Export as a Master File to get a good quality export file of your Timeline.
Al

Unable to Export iMovie project in everyway I have attempted for the past 2 weeks. Please Help! Due date coming up!

I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
I don't know what to do any help would be greatly appreciated!
By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck

Error while exporting LSMW Project

Hi friends,
while exporting LSMW project, one error file : "sapfewdll_01_0003_00_2024_1636.err.trc" gets created with the following MSG -
Error(03.10.06 13:40:23.278): Data sent from backend exceeds buffer size!
Please Help
Regards
Sonal

http://www.javamonamour.org/2011/11/updated-version-of-importpy-and.html
click on build.xml and you will see the right jars

Error 27 when trying to export final project

I'm working on a brand new macbook Pro 15inch, 16gb ram and using FCP X 10.1.1 but when I go to export my project (25gb) I am getting an error 27 msg a couple of minutes into the export. Can you please tell me what the cause may be and how to rectify it?
Thankin you,
Mitaka27

Sorry I should have been more explicit. I'm trying to export a master and details are as follows
Sorry about that.
Mitaka27

How do I export a project from Final Cut Pro onto my desktop?

How do I export a project from Final Cut Pro to my desktop as a movie?

Can anyone please help me.. when I click on my timeline in my project library and try to export movie nothing happens! and when I try to "share" to youtube I get an error message stating that it cannot be exported because it contains "no video"... The 4 minute music video that I've created with shots off my Canon T2i looks and plays great....If I uploaded the videos into Final Cut but did not save them on my desktop or anywhere else on the Mac would this be a reason to get this message? I have never experienced this before...the only option under "share" that works is "email"
[email protected]

Export/Import Project still buggy in v2.1.3

After seeing the update notes for v2.1.3 and noticing references to project importing, I started to get excited that maybe the bugs have been ironed out. Unfortunately my longstanding bug still remains.
If anyone can think of any workarounds I'd be extremely grateful...
I have a 2.16GHz Intel Core Duo MacBook Pro with 2GB RAM, running OS X 10.5.6 and now Aperture 2.1.3
I have a project with many images, arranged into stacks, a pick in each stack with many adjustment and a 62-page book created from these picks. There are also some smart albums and a light-table.
Now I export the project (i.e. in the Project Inspector I right-click the project and choose Export > Project) to a file on the desktop and rename the existing project in Aperture. I now import the saved .approject file and I find that all my Picks are no longer Picks and my book is therefore no longer made up of my desired images. (I've tried this many times now and ruled out the possibility of a corrupt export file).
As a result, when I select the Book I get the "Non-Pick Images" dialog with the dreaded "One or more placed items are no longer the pick of a stack." message. "Use Current Pick" ruins the book - I have to go through and work out all the picks again (and also re-pan all the images within the Photo Boxes as this data has also been lost). "Create new Version" appears to preserve my book's original look, but my project now contains a couple of hundred more images than it used to and my other albums and light-table still have incorrect images shown as the Picks.
Does anybody have any ideas of what I can do to ensure the stack-picks are preserved during the export/import process?
(By the way, the reason I'm exporting and then re-importing is because I actually want to do the export from my laptop where the project is and then the import on my main work machine where the rest of my Aperture library lives, but that fails for the same reason, so I'm doing the export+import on my laptop for now to reduce the number of variables in the problem.)

I go with the assumption that you now know how to create transport sets. After having created a transport set containing the objects you want to be exported, go to the administer tab under the main page of portal. There you will find the Export/Import portlet. Here you need to choose your transport set from the first LOV and then click EDIT to choose the "Security Option". Now you export out the stuff. This will export all the user page customizations for you.
Thanks.

Unable to export BPM Project

I'm on Jdeveloper 11.1.1.6.0 and have installed the plugin bpm-jdev-extension.zip and have successfully created a BPMN process. I've been able to deploy the composite and it works great.
However, I'd like to be able to export the project in Jdeveloper. When I go to the export option, the only item I see is "UML as XMI".
It doesn't give me the option to export the BPM project.
Any ideas?
Thanks,
Mike

Hi Mike
I am little bit confused. What exactly do you want to Export. Like your entire application to some other machine. Or you want to deploy this application on some other soa/bpm domain. If so, then you need to get JAR for your workflow project and EAR for all the rest of the things. Incase if you already deployed this once to any domain, then under your application root folder/deploy folder, look for any EAR or JARs. Just take those and deploy to any other soa domain. Generally under your workflow project also you should see a folder named deploy and under this see a workflow jar sca_MyProcess_rev1.0.jar. While deploying if you choose option to include all taskdetails also in the same jar, you will have only one deployment file. Just take this and deploy to any other soa domain.
If you want to export the source code itself, you can copy the entire application folder and move to any other jdeveloper folder or other machine.
For any application/project in JDeveloper, you can go to properties for that -> Deployments -> and create any new Deployments you want like JAR, EAR, WARs etc.
Thanks
Ravi Jegga

Exporting Motion project as FLV (Flash)

Does anyone know the best way to export a project as a FLV (flash)?
If that is not possible I think it should be added with the great things you can do to the online streaming.
What does everyone think?

I figured that would be a way, but I was wondering if it could be done straight from Motion its self. I guess I will bring it straight back to FCP to do it.
I still think having that plug in part of motion is a great way to finish up a project that will be going to the web.

After i export my project from iMovie, where does it go?

i exported mmy project to idvd and i cant find my project, i have it on my desktop but it wont open up or play please help.

i cant find my project,
i have it on my desktop
What are you clicking on your desktop if it is not your project, the one you cannot find?
You will be better off posting in the iMovie and/or iDVD forums where the experts hang out. This forum area is for MBP problems which you are not having. Your problem is software related.
Also, it would be helpful to the folks helping you if you would advise which OS system is currently installed.

Export P6 Project to P5

Hello Everybody.
We need to know if is possible
export a Project from P6 to P5?? through XER file is
possible it?? P6 permit it?
We have P6 program
and we have clients that have P6 and they require work
with the same project in P5. How can I do it?<br
/>
I appereciate any assistance.<br
/>
Mauricio
Planner

Err... you do not have to do any of the above. P6's
built-in export option has an option to export to
Primavera Contractor 5.0. Just choose that option and
proceed with the export. The resulting xer can be
opened in P5.
Cheers

Problem exporting my projections

exporting the projection of my photos, Lightroom 5 always stops at 10% of the process. I've tried numerous times and always stops at this 10% progress of the process. What can I be doing wrong?

There is a difference between capture sharpening and output sharpening. The general idea is to get the image just sharp in Develop (but not over sharp) and then apply output sharpening as you export the photo (click image below).
Try exporting a jpeg or tiff from your raw file and use the type of sharpening depending on your purpose e.g. for printing choose the paper type and level of sharpening. If the image is to be used on a website, blog or for sending by email; use screen sharpening.

Exporting several projects at once

Is there a way to export multiple projects at once, or to create an export list such that it'll automatically export every project on that list sequencially?

I just Send To Compressor for those.
Or, export them all as QT files (Cmd+E) then use Compressor on those all at once.

Export P2 project....

Similar Messages

Maybe you are looking for