Export software instrument tracks

Is there an easy way to convert the software instrument tracks into audio files so they can be exported and used in 3rd party digital music programs...ie..Pro Tools, Digital Perfomer...etc...??

There are two ways of going about this.
a) The 'solo tracks' method already described in this thread. This will produce versions of the each track with the effects, panning and any level changes intact.
b) I usually create in GB and mix in Cubase LE. I've posted my method:
http://homepage.mac.com/rfwilmut/notes/GBtoCubase.html
just subsitute your program of choice for Cubase. This method produces the tracks without effects etc. You can do the basic copying out in one stage, but then you will probably have to re-save each track as described, depending on whether your program will import them as they stand.
Each method is perfectly valid, just choose the one which suits you best.

Similar Messages

Can't record software instrument track to an audio track

I'm frustrated at the moment. I'm sure this has worked before.
I have a project that contains external MIDI tracks, software instrument tracks and Garageband instrument tracks. All tracks play when I unmute them. The external ones play thru a Roland synth and audio comes back via ADAT thru my Firestudio interface.
I created an audio track for each MIDI track. I can record the output of each synth track as audio one at a time. But if I unmute one software instrument track, send it's output to channel 1 and 2, set the inputs of my record-enabled track to 1 and two I get no audio recorded. I know it's gotta be something simple that's wrong, but can't figger it out.

If you want to record an internal software instrument to audio you can just select the track and use the "export track as audio" command from the file menu. Or you can select the regions and use the bounce in place feature or solo the instrument in question and use the bounce command and import the resulting file. Logics INPUTs 1 and 2 are not the same as Logic's OUTPUTS 1 and 2. If they were you'd get a feedback loop. If you are careful and MUST do it this way, you can cable from outs 1&2 to inputs 1&2 but you must first disable the output the track you are recording on to to avoid feedback.

Creating a new software instrument track in Logic Pro 9

When I create a new software instrument track in Logic 9, the newly-created track always defaults to "EVP 88 Electric Piano" instead of "Inst 1" like it's supposed to. Why does Logic do this and how can I restore the settings so that it opens the new track as "Inst 1."
Thanks much!!
Alex

That was added around 9.1.1 - presumably so people wouldn't create an instrument and then ask "I created an instrument, but it don't make no sound."
You can uncheck the open library box or go to HD>Library>App support>Logic>channel strip settings>Instrument>01 Logic instruments and change the one called something like "EVP88 Electric Piano" to just "Electric Piano."

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

Using your own sample to create a software "instrument" track

I'm trying to get my Yamaha to play a sound sample I created myself (a typewriter sound) by adding it as a Software "Instrument" track on GarageBand, so I can record the sound repeatedly by striking the synth key over and over again (it has to be done in varying speeds and rhythms, so I don't want merely look the same sample over and over again.
Is there any way to do this, or am limited in using the samples that come in the various packs Apple sells?

do a web search for "polyphontics"

Copying an entire software instrument track from one project to another

Hello,
Is it possible to copy or import one entire software instrument track from one GB 3.0.2 project to another? At the moment I've got to copy a region from one project, open another project, paste it in the 2nd project, and open the other one again (which appears to close the 2nd project) to copy the second region. This is incredibly cumbersome because I can't have both projects open at the same time.
Has anyone found a less tiresome method to do this?
Thanks
Hiranya
Powerbook 15" Hi Res 1.67 GHz 2 Gb RAM Mac OS X (10.4.6)

The easiest work-around I can imagine is to join all regions of the track and copy that. Another option is to freeze the track, which will turn it into normal audio. You might also add your MIDI parts to the library. That will avoid the need to switch between projects, but does require one or two more actions.

Fade out of multiple software instrument tracks

Can anyone tell me, or point to the place in the manual, or refer to a previous posting, for doing a fade out of multiple software instrument tracks all at the same time. I would prefer not to do automation of each track individually.
Thanks

When's National Talk Like A Pirate day, this year?
I'm going to spend the day going... "Got any warez? Keygen! Keygen! Couldn't bung us a serial mate, could ya? Unlimited bandwidth, you little treasure, gonna grab me some booty!"
Ah:
http://www.talklikeapirate.com/
(Mods, it's all just a bit'o'fun! Delete not all ye who enter here!)

How do you record an external Midi Instrument + Software instrument track down to a combined Audio track ?

I have two piano sounds I'm trying to blend into one. One is an external MIDI module set up as an external instrument within Logic and the other is a software plugin instrument (Ivory II). I'm trying to record the blended pianos into a single audio track so I can ditch the midi track and more so the CPU intense software Instrument track (it's killing my setup....). For the life of me I can't figure out how to assign both these entities as inputs and get them to record simultaneosuly onto an audio track.
My setup is a Presonus Studiolive 16.4.2 with the following assignments:
The external MIDI module's audio output is routed stereo directly into channel strips 9 and 10. By default the firewire output of this channel strip is returned to firewire outputs 9-10 on the studiolive, but this really doesn't matter since recorded audio is being monitored thru the main output buss assigned to channels 17 and 18.
My software plugin (Ivory II) is routed to output channels 17 and 18 which is the default setting for routing the output to the master buss for the Presonus.
On my audio track that's setup in Logic I can assign the inputs to 9 and 10 and I get the external midi module's output to record, but I cannot find any way to get the software instruments output into this mix because there is no input assignment for this.
Is there any way to combine these two entities and assign them to record onto a single audio track or am I missing something here? If there's no simple way to do this, can somebody offer any tip or ideas on how to accomplish the same thing here. I really need to ditch the software plugin. My setup only seems to be able to handle one plug in at a time on the software instrument side. Not sure why that is because my setup is not that old and the memory on my MBP is maxed out at 4GB....but that's another topic of discussion
Any suggenstions would be much appreciated...

Thanks for the reply....
I actually tried freezing the software instrument track and that had little if no effect on CPU. I then read in the book or somewhere that the freeze function really only works on effect plugins. Don't know if that's true in all cases, but that seems to be what's happening. Still would like to combine these tracks and I'm guessing I'm going to have to get creative with bussing or subgroups to make this happen. Unfortunately I think the fact that my Presonus board has hardmapped output routings for all the inputs makes that difficult, but haven't actually tried yet. I'm thinking if I can reroute the midi modules audio output input into the Presonus to a subgroup and then route the software instrument plug in to the same subgroup that I can then mix/capture this and hopefully route the audio's input to the subgroup to pick up the mix.
Does this make sense to anybody reading this?
We'll see and I'll post the results if it works....
thanks...b

HELP! Maximum number of Software Instruments Tracks reached!

WHY IS THERE A LIMIT?! I've got 94 patches, but lots of layers and splits.
What is this limit and how can I get more software instrument tracks?!
I've been using it live for a few months, but this could be the endgame. =(
sk

So I'm running a fairly intense mainstage concert.
Macbook (black) 4gb ram, 2.4ghz CPU
My first 30 patches are various general sounds that get used a ton on cover-band/top 40 gigs. They include pianos, rhodes, b3's, pads, guitars, and that type of stuff.
Every one of those patches also has strings layered (I bring them in with a foot pedal) and breath control horns layered.
I have now moved those layers to Set level to reclaim some instrument channels. I'm having to do some less-than-pretty workarounds to make this work elegantly in live performance.
The other 60 sounds are layers and splits for specific songs (i.e.: Madonna Holiday, Jessie's Girl, all the way up to sounds for Britney's Gimme More, and Love Song by Sara Bareille).
Most of the time I have 2-3 sounds/layers I'm going between for each song, usually swapping with a foot pedal.
I also have a small bank of left hand bass + piano, organ, rhodes type patches with the same layered Strings and Horns as above.
I perform professionally with a dozen different event entertainment bands and acts. They are constantly adding and exchanging material. I need (1) mainstage file for all of them. I just can't go between files and constantly be needing to get to other instruments that I have to wait to load.
My load time for my file is a little under 60 seconds, and I'm using about 50-60 of my own EXS multisamples taken from my existing keyboard rig (I've got all the important sounds for most every tune I do on my Fantom, and have been sampling and adapting them to EXS24).
So, while 256 software instruments may appear unusual, once you consider the needs of a flexible professional using the software, 256 is quite a limiting number. I also don't usually see a set list ahead of time (a few bands I work with don't use set lists, they just call tunes) so the idea of building a set ahead of time is not practical nor feasible.
512 would last me for a long, long time. I'd probably eventually hit the limit, but it would be a couple years. 1024 seems like a reasonable maximum, especially if it's an arbitrary limit in code with no bearings on memory management, or any drastic engine-rewriting behavior.
PLEASE increase the limit. Nearing 256, Mainstage still runs snappy, I've got 1.5gigs of RAM open for additional samples. An arbitrary limit of 256 is just silly. Every keyboard out there has >1000 presets and sounds available. My Fantom-X allows me 64 internal performances (with 16 channels each) and 64 performances on a card. That's 2048 'instrument channels'.
Please!! I am addicted to the coolness of mainstage and I don't wanna go back to hardware. I just did a gig in Cancun and all I had to bring was my laptop.
JK

Convert software instrument tracks to audio

I'm trying to get up to speed with Logic after having been a Digital Performer user for years. One place I'm struggling is trying to convert a track that's basically MIDI controlling a software instrument into a new track that contains the underlying audio (with all effects) of the software instrument.
I used to do this in DP by sending the software instrument to a bus and then "recording"
The bus structure on Logic is quite a bit more confusing (to me) compared to DP and the manuals have too much information to find the answer quickly.
Hoping that someone can point the way.
Thanks
D

Either route that Instrument track to a Bus and select that Bus as an Input for an audio track (now possible in Logic 8) and record in realtime (enable software monitoring in your Audio prefs and use the Input monitor of the new track to monitor the recording, select "no output for the recording Bus) or use the normal "bounce" function which will bounce your Instrument also in offline mode which is faster ("solo" the Instrument before bouncing!). After bouncing import that Audio file onto a new track. I presonally prefer the Bus recording method as the waveforms are created whilst recording.

How do I record voice and hear software instrument track track

I have created a track with my Roland XP as a software instrument. Now I want to create a track while singing. I chose audio track, pluged in my microphone, set the metronome, pushed record...... but can't hear the instrument track or metronome so I can sing with that track. What am I doing wrong?

tomgribby wrote:
I have recorded my voice as a live instrument track on my Samson C01U microphone & selected Stereo when i recorded. The vocals are panned to the left
http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)

Instrument track is not added in mixer

Hi,
When I click "Track" --> "New Software Instrument Track", there's a new layer appearing in my timeline (so far so good).
But when I open my Mixer, the track isn't there. Only "Output" & "Master".
When I record a pattern in that track, I can hear it realtime, I can see it recording, but there's no playback afterwards of that instrument.
Can someone help me please?
J

As Erik suggested.. open the event editor and look for Vol entries there.... for example that could be interfering with things..
If you have an iPad or iPhone and have used any Logic Pro related apps.. turn them physically off, leave them off and try out Logic Pro again...
Next, if that doesnt fix things.. shut down your Mac and unplug any midi controllers you may have.... and then test again
Finally, try the true and much tested 'delete prefs' method...
http://support.apple.com/kb/HT5859
and specifically this part....
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Then test again

How to set female voice as software instrument?

I want to use the GarageBand software keyboard to play female vocals (to use in practicing pitch matching). I can't seem to figure out how to do this. Maybe there's a plugin I need?
I'm pretty technically competent, but a novice w/music sw.
To be clear, I don't want setting that optimize recording a real female voice. I just want to press a key and hear a female voice, in tune, that I can match the pitch of my own voice to.

Do you have the JamPacks installed?
In the Jam Pack "Voices" is a Software Instrument "Synth Soprano Solo". That is the closest you can get to a female solo voice with the ready made instruments.
The JamPacks are available as part of MainStage 3 bought from the AppStore.
Or create your own vocal instrument by duplicating a "Sound effectss" Instrument and adding your own samples to the scales.
Sing the scales once and correct the pitch with flextime to get it perfect. Export the scales as an audio file and reimport it.
Cut out regions "C", "C#","D". etc.
Create a software instrument track.and set it to "Sound Effects Instument". Safe the Instrument with anew name . Now modify the sound effects by dragging your samples to the corresponding keys and you can play your own voice perfectly in tune.
Safe your new instrument.
See this help text: GarageBand '11: Play sounds with the Sound Effects Software Instrument
You will see the sound effects you added to your custom instrument, when you hover the mouse over the keys. This will display the name of the sample the key will play.
Regards
Léonie

Using software instruments that are stored on an external drive.

I recently bought Logic 9. Doing a custom install, I stored the instrument library on an external disk thinking it would be easy to use the instruments at a later time. Now, however, when I create a software instrument track, I only see the basic exs instruments. I can't find any further help on how to use my full library of instruments stored on my external drive. This must be simple, but I can't figure out. Any help would be much appreciated.

Logic looks at the Garageband library for these.
You'll need to go in there and create an alias to where you've put your content, otherwise they won't show up in the Garageband instruments section.

Using External Software Instruments

How do I assign an external software instrument to a track in Logic? Thank you.

Create a Software Instrument track.. and then left click and hold on the Software Instrument (SI) button.. (The one just above the I/O label in the Track Inspector on the Left hand side of Logic's Layout.)
You will find all of Logic's Apple SI's there along with any 3rd party SI's you may have installed too, just below Apple's SI's.

Export software instrument tracks

Similar Messages

Maybe you are looking for