Exporting to PDF fails for a report

Hi,
One of my reports no longer exports to PDF. When run through our ERP system it looks as if it's exporting but the progress popup window quickly dissappears. When we go to the location where the exported file should be nothing is there.
I tried opening up the report in the Crystal 11 and exporting from there. I get the following two error messages:
Failed to export the report.
Not supported
This was working yesterday. The only thing I did was to add the u2lbar.dll to the bin folder and copy over the barcode font so that we could display barcodes on this report. However, even if I comment the line to do the barcode I still get the same problem.
Thanks,
Jon

The font you are using probably doesn't have embedding permissions.
hth,
- Ido

Similar Messages

Export to PDF fails for some reports, but report viewer works

Hi all
Our application produces several different reports.
- Report A can successfully be viewed in the ASP.NET report viewer control and can be exported to PDF
- Reports B and C can successfully be viewed in the ASP.NET report viewer (all pages), but export to PDF fails with a very unclear error message. The stack trace is attached below.
Two days ago, reports B and C have fully worked, and I'm sure by 100% that the report templates haven't been modified since then.
Can anyone explain what is going wrong? Is there some internal logging inside Crystal Reports that can be investigated to find out about the reasons of the error?
Any help would be greatly appreciated!
Thanks
Kuno
PS.: The Crystal Libraries under investigation are quite old. In fact, it is a very old application that still runs under .NET 1.0.
CrystalDecisions.CrystalReports.Engine.ExportException: Fehler in Datei C:WINDOWSTEMP     emp_b9cf0dd0-8964-4ddf-ba09-0daaa4e1ef20.rpt:
Fehler von Export-DLL gefunden:
   at u263B.u263BJ(String u2660§, EngineExceptionErrorID u2660u25AC)
, Int32 u2660u266B)Int16 u2660
   at u263B.u263BD(Int16 u2660u2640)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
   at AdamsClient.Web.EngineerClient.TolerancesReportPage.btnSpecPDF_Click(Object sender, EventArgs e) in D:ProjektexxxxAdamsII SVNDevelopmentS
ourceAdamsAdamsClientWebEngineerClientTolerancesReportPage.aspx.cs:line 496
   at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
   at System.Web.UI.Page.ProcessRequestMain()

Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk

Export to PDF fails for FR - EPM 11.1.2

Looking at server noticed that the HRPrinters1-5 were created but going to non-existant directory d:\hyperion\...\pdfoutput\ Should be going to d:\oracle\middleware\...\pdfoutput. Had to delete hrprinters1-5, edit Oracle\Middleware\EPMSystem11R1\products\biplus\bin\hrcreateprinters.ini and hardcode the correct directory, run hrcreateprinters.exe in same directory, restart printer service, test export to pdf successful.

Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk

Oracle 10g Discoverer Reports & export to xls fails for large reports

Hi ,
We have following configurations:
1: RHEL 5.4
2: Discoverer :Version 10.1.2.48.18
3: Oracle10g Apps Version : Version 10.1.2.0.2
Issue:
Most of small reports works fine ....but when large discoverer reports are executed the page
keeps on refreshing for 15-20 hours but no output ....same for export to xls ......
But same reports works fine in oracle9i for same data voulme....
Observations:
When on linux with top command the processes are monitored its observed that discoverer process
dis51ws dies for large reports after 1-2 minutes ...& the page keeps on refreshing but no output....
for 1-2 minutes it consumes 50-80% cpu utilisation then process disappears & cpu 80% idle ...
It seems that as 10g Apps is installed on RHEL 5.4 ...non certfified OS causing an issue...
Can any one adds more inputs in this regards......
we have checked logs : below are log details :
Below logs gives "Logkeys: exceptions discoiv.servlet_exceptions" for this report ...
1:
OC4J~OC4J_BI_Forms~default_island~1:
10/04/11 12:11:29 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
10/04/11 12:11:59 Using oracle.reports.util.EnvironmentGlobal class
10/04/11 14:23:37 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:23:38 Discoverer Model - 10.1.2.48.18
Session ID:2010041114240115278
10/04/11 14:25:42 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:25:42 Discoverer Model - 10.1.2.48.18
Session ID:2010041114254315439
10/04/11 14:28:53 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:28:54 Discoverer Model - 10.1.2.48.18
Session ID:2010041114285615691
10/04/11 14:29:13 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:29:13 Discoverer Model - 10.1.2.48.18
Session ID:2010041114291315728
10/04/11 14:32:35 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:32:35 Discoverer Model - 10.1.2.48.18
Session ID:2010041114323615949
10/04/11 14:32:48 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:32:48 Discoverer Model - 10.1.2.48.18
Session ID:2010041114324815982
10/04/11 14:34:44 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:34:44 Discoverer Model - 10.1.2.48.18
Session ID:2010041114344616128
10/04/11 14:34:55 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:34:55 Discoverer Model - 10.1.2.48.18
Session ID:2010041114345516155
10/04/11 14:36:25 Tutalii: /oracle10gas/app/oracle10g/discoverer/lib/discoverer5.jar archive
2:
Discoverer~SessionServer~12
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Active Eul: EULADMIN
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
DCSCORBAInterface::Delete called
DCSCORBAInterface destructor called
DCSCORBAInterface::Delete called
DCSCORBAInterface destructor called
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
3:
application.log
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Finding async request action forward
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Calling externalize
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_TOOL: dvtb xk-1ml versionzw1.0w kyxdvtbyxbisltyxbicho vzwwjyxjbisltyxjdvtby
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_VIEW: dv xk-1ml versionzw1.0w kyxdv bazw0w cszw25wyxpc vzw1wjyxjdvy
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_VIEW: lc
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_HS: dvhs
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_DS: dv_ds &qls_z!2=New GL Report.Clndr Id&arq=false&qls_x!14=Sheet 1.Closing Balance (Credit)&qls_x!3=New GL Report.Voucher No&qls_z!3=New GL Report.Frm Prd&fm=xml&qls_z!4=New GL Report.To Prd&qls_x!2=New GL Report.Prd Desc&qls_x!11=Sheet 1.Debit Amount&qls_x!4=New GL Report.Gl Voucher No&qls_x!9=Sheet 1.Opening Balance Debit&tss_s!0=New GL Report.Acct Id,lh,group,false&qls_x!1=New GL Report.Acct Sdesc&qls_z!1=New GL Report.Loc Desc&qls_x!10=Sheet 1.Opening Balance (Credit)&qls_x!12=Sheet 1.Credit Amount&aow=false&qls_x!7=New GL Report.Shrt Code&qls_x!13=Sheet 1.Closing Balance (Debit)&qls_x!6=New GL Report.Pmt Rct Dt&qls_x!8=New GL Report.Dtl Nrtn&sss=true&qls_x!5=New GL Report.Voucher Dt&qls_x!0=New GL Report.Acct Id&qls_z!0=New GL Report.Loc Id&ddsver=1
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.ViewerModelImpl.externalize [EXTERN_STATE]: $wksht$%24dv_ds%24%26qls_z%212%3DNew+GL+Report.Clndr+Id%26arq%3Dfalse%26qls_x%2114%3DSheet+1.Closing+Balance+%28Credit%29%26qls_x%213%3DNew+GL+Report.Voucher+No%26qls_z%213%3DNew+GL+Report.Frm+Prd%26fm%3Dxml%26qls_z%214%3DNew+GL+Report.To+Prd%26qls_x%212%3DNew+GL+Report.Prd+Desc%26qls_x%2111%3DSheet+1.Debit+Amount%26qls_x%214%3DNew+GL+Report.Gl+Voucher+No%26qls_x%219%3DSheet+1.Opening+Balance+Debit%26tss_s%210%3DNew+GL+Report.Acct+Id%2Clh%2Cgroup%2Cfalse%26qls_x%211%3DNew+GL+Report.Acct+Sdesc%26qls_z%211%3DNew+GL+Report.Loc+Desc%26qls_x%2110%3DSheet+1.Opening+Balance+%28Credit%29%26qls_x%2112%3DSheet+1.Credit+Amount%26aow%3Dfalse%26qls_x%217%3DNew+GL+Report.Shrt+Code%26qls_x%2113%3DSheet+1.Closing+Balance+%28Debit%29%26qls_x%216%3DNew+GL+Report.Pmt+Rct+Dt%26qls_x%218%3DNew+GL+Report.Dtl+Nrtn%26sss%3Dtrue%26qls_x%215%3DNew+GL+Report.Voucher+Dt%26qls_x%210%3DNew+GL+Report.Acct+Id%26qls_z%210%3DNew+GL+Report.Loc+Id%26ddsver%3D1%24dv%24xk-1ml+versionzw1.0w+kyxdv+bazw0w+cszw25wyxpc+vzw1wjyxjdvy%24wd%24false%24lc%24%24dvtb%24xk-1ml+versionzw1.0w+kyxdvtbyxbisltyxbicho+vzwwjyxjbisltyxjdvtby%24wvs%241101%24dvhs%24$cn$&vct=svd&cnk=cf_a101$ap$%26df%3D%26l%3D%26s%3D%26nc%3D%26dl%3D$expl$&sp=&node=&event=focus&state=(117)&root=63&wbt=2$prid$NEW_GL_REPORT%2F31$ctyp$viewer
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Storing state
10/04/11 14:37:25 discoverer: [INFO] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Externalize Perf: 8ms
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving Attributes
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving ApplicationRequest
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Checking for SSO mode
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving errors, messages
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Returning final forward: "/ExportProgress.uix" redirect: "false"
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute ----------------------- End Request --------------------------
10/04/11 14:37:25 discoverer: [INFO] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Total Request Time in AppCtrl: 18
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] org.apache.struts.action.RequestProcessor.processForwardConfig processForwardConfig(ForwardConfig[name=long running operation,path=/ExportProgress.uix,redirect=false,contextRelative=false])
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.view.DiscovererPageBroker.isCacheable Setting cacheable to: true
4: XML log:
log2010041114285615691.xml
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>184</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer started.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>162</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="TRACE"></MSG_TYPE><MSG_LEVEL>5</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Return DCSModelInterface::SendReceiveData(kScheduleInterface, inTable, outTable)
outTable = DCITable
     Length=0
]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcsmdli.cpp</FILE_NAME> <LINE_NUMBER>259</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[DCSModelInterface::SendReceiveData(kScheduleInterface)]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS </MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcsmdli.cpp</FILE_NAME> <LINE_NUMBER>226</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> <LOG_SIZE>0</LOG_SIZE> <EXTRA_INFO><MethodEnd duration="0.1" sizeChange="0" >
real 0m0.1s
user 0m0.900s
sys 0m0.109s
</MethodEnd></EXTRA_INFO> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:37:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer stopped.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>184</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:37:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:37:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer started.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>162</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:37:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
Regards,

Hi ,
as per Note: 466697.1 ....its an memory error....& need to increase MaxVirtualDiskMem and MaxVirtualHeapMem
But we already have slowly increased MaxVirtualDiskMem and MaxVirtualHeapMem to below very high values ...but the issue remains same.......
as per note we are getting Logkeys: exceptions discoiv.servlet_exceptions error but
after that we are not getting below error ............
Unexpected error in state machine: java.lang.OutOfMemoryError
Hence I presume that its different issue rather than memmory....
Below are pref.txt values..........
CacheFlushPercentage          = 25          # Percent of cache flushed if the cache is full. valid values 0 - 100%.
MaxVirtualDiskMem          = 9294967296     # Maximum amount of disk memory allowed for the data cache. Should be greater than or equal to MaxVirtualHeapMem
MaxVirtualHeapMem          = 4294967296     # Maximum amount of heap memory allowed for the data cache.
QueryBehavior = 0          # Action to take after opening a workbook (0 = Run Query Automatically, 1 = Don't Run Query, 2 = Ask for Confirmation)
Also we have raised an SR & as per SR .............all below settings are tried as per SR except for applying a recent patch....
====================================================================
Discoverer performance is largely determined by how well the database
has been designed and tuned for queries.
A well-designed database will perform significantly better than a poorly
designed database.
Workbook design can also affect query performance.
1. Apply latest Discoverer patch as documented in <<Note:237607.1>>
'ALERT: Required and Recommended Patch Levels For All Discoverer Version'.
2. Increase the maximum JVM heap memory:
In general, the default values for the minimum heap (-Xms) memory and
maximum heap (-Xmx) memory are sufficient.
However, if your organization consistently runs large Discoverer queries
then you may benefit from increasing the maximum heap memory from the
default values.
This is recomended if your users are typically running large queries via
Discoverer Viewer.
Increasing the JVM memory can help to avoid "java.lang.OutOfMemoryError"
in Discoverer Viewer:
Please see <<Note 563960.1>>, Best Practice: Configuring The
OC4J_BI_Forms JVM For
Discoverer Viewer/Portlet 10g Performance And Stability for specific
details.
3. Disable Query Prediction:
Query Prediction provides an estimate of the time required to retrieve
the information in a query.
The Query Prediction appears before the query and consumes time.
Edit the <oracle_home>/discoverer/util/pref.txt on the middle-tier
server and set:
QPPEnable=0
Also set:
QPPObtainCostMethod = 0
4. Uncheck the 'Enable fantrap detection' checkbox.
When the box is checked, every query generated by Discoverer is
interrogated. Discoverer will detect a fan trap and rewrite the query to
ensure that the aggregation is done at the correct level.
Please refer to <<Note:210553.1>>, Oracle BI Discoverer: Fan Trap
Resolution - Correct Results
Everytime for more information on fantraps.
To disable, in Plus go to Tools -> Options -> Advanced -> Fan Trap
settings.
In Viewer go to Preferences and uncheck the box.
5. Disable Materialized Views/Summaries
In pref.txt add parameter:
MaterializedViewRedirectionBehavior = 0
Value equal to 0 ensures that Materialized View (MV) Redirection is
always performed when MVs are available.
6. Improve query performance by optimizing the SQL.
In pref.txt modify/add following parameters:
SQLFlatten = 0
SQLItemTrim = 0
SQLJoinTrim = 0
UseOptimizerHints = 0
If value of SQLFlatten is 1 then Discoverer will merge inline views in
the query SQL where ever possible.
In case of SQLItemTrim, Discoverer will remove unused folder items from
the query SQL where possible and for SQLJoinTrim Discoverer will remove
unnecessary joins from the query where possible.
UseOptimizerHints will add Optimizer hints to SQL if set >
0.Unnecessarily making Discoverer perform these checks consumes
resources and rather than increasing the performance may reduce the same. So unless you feel these checks have to be performed depending on
requirements, assign zero to these parameters.
7. When Discoverer builds a query, Discoverer makes a database security
check to confirm that the user has access to the tables referenced in
the folders. Avoiding this check can save time.
So in pref.txt underDatabase section add:
ObjectsAlwaysAccessible = 1
8. Whenever you are creating conditions, ensure that you match the Case.
This in turn can reduce the time Discoverer spends on changing the Case
and matching.
For example:
option Upper(Department) in (Upper('VIDEO SALES')
9. Ensure that summaries are refreshed periodically in Discoverer
Administrator.
10. Increase the amount of memory available for the Discoverer data cache. Please refer to <<Note 245752.1>>, Explaining Oracle BI Discoverer
Session Memory Management
And Server Cache Settings.
11. Performance may be enhanced by enabling OracleAS Web Cache.
==================================================================
Thanks for your reply....................
Regards,

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Export to .pdf fails.

Tar 6388351.992
Customer is on DBI 7.0.1 and XML Publisher 5.0.0
DBI uses XML publisher to export to .pdf.
When trying to export reports to PDF, the customer gets an
"Exception in Process Method Of FOProcessor "error message.
This does not occur when exporting to Excel.
After setting up a trace we got the error message:
[070507_112246550][][ERROR] Failed to load the image:
http://nadine1.orange.cm:8000/237/OA_MEDIA/bisorcls.gif
The problem is this URL
http://nadine1.orange.cm:8000/237/OA_MEDIA/bisorcls.gif
It should be
http://nadine1.orange.cm:8000/OA_MEDIA/bisorcls.gif
The customer has checked and this one without /237 in it works.
The customer's <db_servername> .XML file and <appl_top>/admin/adovars.env
both show the correct setting for OA_MEDIA and he has run autoconfig again.
Does anyone know where this misconfiguration could be
coming from.

Hi
Please use the internal mailing list for XMLP questions the forums are meant for customers not support or development.
That said, as I remember the integration, XMLP just generates the ouput. the DBI module is in charge of where its put and how its accessed. Id suggest asking the DBI dev team for some help.
Regards, Tim

PDF Template for XML Report

We are trying to create a PDF Template for an XML Publisher Report using Adobe Acrobat Profession Version. The PDF Template works fine for one employee but when the start and end body tags are inserted in the template, the concurrent process to submit this reports completes in warning.
The OPP Log shows the below details
[6/30/08 1:26:36 PM] [102436:RT20660155] XML Publisher post-processing action complete.
[6/30/08 1:26:36 PM] [102436:RT20660155] Completed post-processing actions for request 20660155.
[6/30/08 2:29:59 PM] [OPPServiceThread0] Post-processing request 20660180.
[6/30/08 2:29:59 PM] [102436:RT20660180] Executing post-processing actions for request 20660180.
[6/30/08 2:29:59 PM] [102436:RT20660180] Starting XML Publisher post-processing action.
[6/30/08 2:29:59 PM] [102436:RT20660180]
Template code: Test123
Template app: XBOL
Language: en
Territory: US
Output type: PDF
[6/30/08 2:29:59 PM] [UNEXPECTED] [102436:RT20660180] oracle.apps.fnd.cp.opp.PostProcessorException: XML Publisher output file not created
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:281)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
I think this is do which how i am creating the PDF Template. When i am not inserting the repearting group tootips then the PDF Template works abosoultey fine for one employee
the text inserted in the Toottip for the start of the repeating group - @{rep_field="BODY_START"}@
Tootip for each repeating row @{rep_field="T1_G1"}@ ,@{rep_field="T1_G2"}@ and so on.
Tootip for end of the repating group @{rep_field="BODY_END"}@

XML Data
<?xml version="1.0"?>

<MODULE1>
<LIST_G_HGL>
<G_HGL>
<EMPLOYER>HWS</EMPLOYER>
<BOX_1>YEN</BOX_1>
</G_HGL>
<G_HGL>
<EMPLOYER>HGL</EMPLOYER>
<BOX_1>YE</BOX_1>
</G_HGL>
</LIST_G_HGL>
</MODULE1>
Further when i tried using the Template Viewer of XML Publisher Desktop with the above XML File and the template i created in Adobe Acrobat Professional (i am mailing the template to [email protected]) , i got the following error
[070808_093926007][][STATEMENT] MergerEngine.modify : template forms value is being changed......
[070808_093926007][][STATEMENT] MergerEngine.modify(String, String, String) block ::: FieldName -> Start , FieldValue ->
[070808_093926007][][STATEMENT] MergerEngine.modify(String, String, String) block ::: FieldName -> End , FieldValue ->
[070808_093926038][][STATEMENT] MergerEngine.modify(String, String, String) block ::: FieldName -> EMPLOYER , FieldValue -> HGL
[070808_093926054][][STATEMENT] MergerEngine.modify : template forms value is changed......
[070808_093926054][][EXCEPTION] java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
     at java.util.Vector.elementAt(Unknown Source)
     at oracle.apps.xdo.template.pdf.RepeatEngine.getGapBetweenGroups(RepeatEngine.java:449)
     at oracle.apps.xdo.template.pdf.RepeatEngine.<init>(RepeatEngine.java:154)
     at oracle.apps.xdo.template.pdf.RepeatEngine.<init>(RepeatEngine.java:101)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1742)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1684)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1445)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1583)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:131)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:73)
     at oracle.apps.xdo.runner.PDFFormRunThread.run(PDFFormRunThread.java:45)
[070808_093926054][][STATEMENT] <--- before calling createContents() --->
[070808_093926086][][STATEMENT] <--- before calling addFontInfoToResources() --->
[070808_093926086][][EXCEPTION] oracle.apps.xdo.template.pdf.exception.FatalException: page Key can't be found to duplicate page......
     at oracle.apps.xdo.template.pdf.RepeatEngine.getDupPageKey(RepeatEngine.java:1421)
     at oracle.apps.xdo.template.pdf.RepeatEngine.composePages(RepeatEngine.java:827)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1743)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1684)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1445)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1583)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:131)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:73)
     at oracle.apps.xdo.runner.PDFFormRunThread.run(PDFFormRunThread.java:45)
End of Process.
Time: 0.251 sec.
FO Formatting failed.

Pages: How to export a PDF suitable for print-on-demand

I need to be able to export a PDF from Pages that will meet the specs for the IngramSpark or Lightning Source Print on Demand programs. They require a PDF that has all fonts fully embedded in one of these two PDF versions:
PDF/X-1a:2001 or PDF/X-3:2002
Does Pages export - either through the export function or Print function - to either of those specs and does it embed full font sets?
Thanks.

The reason neither Pages, or Swift Publisher nor most of the low cost DTP apps do this on OSX is because they use Apple's muddled print output. It almost but not quite outputs to PDF/X-3:2002, and even there there are caveats.
Indesign and QuarkXpress use their own print engines and Scribus uses GhostScript.
GhostScript is available for OSX. I have not tried this so you are in wide open territory, but experiment to see if it fixes Pages' output. My suspicions are that GhostScript may not capture Pages' output before it has already been through Apple's muddled output.
There are other problems with Apple's approach. No specifiable defined colours in Styles. No spot colours, and no proofing. ColorSync itself is powerful but undocumented and difficult to tailor. You can run the end result through Acrobat Pro's Press Check but it only picks up the errors, you are on your own trying to fix them.
The only easy to use, low price DTP application that meets your requirements is Serif PagesPlus, which runs only on Wimdows. You can run this in BootCamp or some other virtualiser.
Adobe lets you effectively hire Indesign CC by the month so may be a cost effective solution in the short term. It is a professional solution but has a professionally difficult interface.
Peter
Some reading matter on the subject:
http://www.prepressure.com/pdf/basics/pdfx-1a
http://support.pixelmator.com/viewtopic.php?f=3&t=10355
http://en.wikipedia.org/?title=PDF/X
http://help.adobe.com/en_US/acrobat/X/pro/using/WSb2f1a50375cd48d3-1f36d19412ada 208ceb-8000.html
http://www.belightsoft.com/products/resources/spsolutions.php
http://www.pdfxreport.com/doku.php?id=en:tools
http://www.planetpdf.com/creative/article.asp?contentid=6541
http://pagesfaq.blogspot.com.au/2006/12/how-does-pages-handle-pdf-x-files.html NB the reference to "buggy", hence my description above of almost does it.

InDesign CS5.5 Export to PDF fails how to fix?

Using InDesign CS5 to creat a portfolio, all layed out and ready to print but when I export to PDF it takes a long time and then fails.
What am I doing wrong?

Is the issue with the one file only or with multiple file, if it is with the one file only then there could be some component like Image , font that could be causing the issue,
And if it with the multiple file then you can try this article:- kb2.adobe.com/cps/878/cpsid_87876.html

Export to PDF Failed "A parameter was incorrect."

How can I get Fireworks CS4 to export to PDF when it gives me this message:
"Could not complete your request. A parameter was incorrect."
This worked a work a couple of months ago, but no longer. (Running Windows XP Pro on PC with 2.2 GHz & 3.5 MB RAM.)
Thanks!

I had a button without a link. Breaking appart the button so it didn't expect a link anymore worked.

Exporting to PDF fails when report includes a barcode

Post Author: Lorne Chisholm
CA Forum: Exporting
I am getting the following error when I try to export a Crystal Report file to a PDF format:
CRAXDRT Error Occured on Server. -2147189152: Cannot find the QE property
I am able to export the report to RTF or Excel format without getting any errors. I am also able to export the same report if I remove the barcoded field. The font I am using is Bar Code 39. The version of Crystal Reports that I am using is 11.
I would like to know what the QE property is and more importantly how to resolve this issue. Any help on this issue would be greatly appreciated.
Lorne

Post Author: mhamill
CA Forum: Exporting
I have a similar problem. I am trying to print a report via the WEB. I have the font installed on the webserver but the print function does a conversion to PDF prior to printing. The barcode font does not appear in the PDF file and therefore does not pront properly. I dont get an error, it just kills the Barcode Font and prints the text. I installed the Bacode functions on my design machine but what needs to go on the server besides the font ?
Did you ever resolve this issue?
Thanks

Export to pdf failed while using Barcode 128 with CR Basic 2008

Hello,
I get the following error message when I try to export a Crystal Report Document to pdf: Error in File
"C:\DOKUME1\URSULA1.HAR\LOKALE~1\Temp\temp_57163b88-26f9-43c1-8043-d3938772b762 {F54D4509-BFEF-444C-B672-DF893EEBD942}.rpt": Operation not yet implemented.
This error only apears when the report contains a barcode with the font Code-128 (print in Barcodetype 128). Is this function not possible with Crystal Reports Basic for Visual Studio 2008? Must I install an additional tool?
Waiting for your answer and kind regards
Ursula

Hi Ursula,
Please provide following:
1) Service Pack you are on (CR)?
2) Visual Studio version
3) Windows or Web Application?
Thanks
Saurabh

Export to pdf hangs on large reports

Post Author: SueIrvine
CA Forum: Exporting
Hello. I have a Crystal Report that's part of an ASP.net web application written in VS.2003. The report is grouped so it can be run for 1 record or hundreds. The report runs fine for a data set of up to about 100 records. (the report is 1-2 pages long) After this, the export process hangs and never finishes exporting the report. (the file size in my temp directory shows 0) This is the code I'm using to export the report. With a large dataset, it never makes it past crReportDocument.export()        Dim crExportOptions As ExportOptions        Dim crDiskFileDestinationOptions As DiskFileDestinationOptions        Dim Fname As String        Fname = "c:\temp\" & Session.SessionID.ToString & ".pdf"        crDiskFileDestinationOptions = New DiskFileDestinationOptions        crDiskFileDestinationOptions.DiskFileName = Fname        crExportOptions = crReportDocument.ExportOptions        With crExportOptions            .DestinationOptions = crDiskFileDestinationOptions            .ExportDestinationType = ExportDestinationType.DiskFile            .ExportFormatType = ExportFormatType.PortableDocFormat        End With        crReportDocument.Export()        crReportDocument.Close()        Response.ClearContent()        Response.ClearHeaders()        Response.ContentType = "application/pdf"        Response.WriteFile(Fname)        Response.Flush()        Response.Close()        System.IO.File.Delete(Fname) I appreciate any help you can give. I've Googled this issue for the past few hours and have not found anything helpful.Sue in Ithaca, NY

I quickly put this together… You said in the first post you have 3 presets… Have you set the marks offsets in there? It's bare bones NO error trapping in it but you could add that… It would expect your named presets to exist… Just replace my '5mm' and so on with your names…
#target indesign
function exportFolder() {
          var i, inFolder, idFiles, doc, offSet, pdfPre, pdfFile;
          inFolder = Folder.selectDialog( 'Where\'s the folder of ID files?' );
          if ( inFolder == null ) { return };
          idFiles = inFolder.getFiles( '*.indd' );
          for ( i = 0; i < idFiles.length; i++ ) {
                    doc = app.open( idFiles[i] );
                    offSet = doc.documentPreferences.documentBleedTopOffset;
                    if ( offSet == 5 ) { pdfPre = app.pdfExportPresets.itemByName( '5mm' ) };
                    if ( offSet == 10 ) { pdfPre = app.pdfExportPresets.itemByName( '10mm' ) };
                    if ( offSet == 15 ) { pdfPre = app.pdfExportPresets.itemByName( '15mm' ) };
                    pdfFile = File( doc.fullName.toString().replace( '.indd', '.pdf' ) );
                    doc.exportFile( ExportFormat.pdfType, pdfFile, false, pdfPre, '', false );
                    doc.close( SaveOptions.NO );
exportFolder();

Export to PDF Failing

My crystal report won't export to a PDF after I put a field on it that had a newly installed font. I have found other people on search engines that have had this issue, but no resolution. I am using CR for .NET 2005 and Adobe Acrobat Reader 8. The font is an MICR font and the CR file is throwing an error stating "Operation not yet implemented". Any ideas, I am on a time crunch to make this work.
Thanks

The million dollar question. Could be Adobe, could be us. I can test the issue more here, but it will take a few days - not that it's that difficult, but other priorities already lined up...
So, two thoughts:
I think ADOBE is at version 9 now. It may be worth while to see if the issue persists with that version installed(?).
I did some googling and it looks like Adobe may have some issues with the MICR fonts (or some subset of these). E.g;
http://forums.adobe.com/thread/343698
Also, this came up:
http://www.adobe.com/support/products/enterprise/knowledgecenter/c3252.pdf
So, it may be an idea to check with ADOBE to see if they do support the font(?). Not trying to blame ADOBE, just want to male sure this is not a known issue.
As far as me testing this. I found a few websites where I can download an eval of the font. Just want to make sure it's the right font. As far as you know, will this do?:
http://www.micr-fonts.com/
Ludek

Customize standard PDF layout for PO Report

Hi,
I need to customize the layout of standard PO report in R12 instance.
Navigation Path:Purchasing Vision Operations (USA) -->Buyer Work Center -->Orders
Under view : My open orders,click on a specific PO number.
At the detail level,on the top right side Actions seleceted as 'View PDF' and then click on GO button.
The PO report output opened in a PDF format.Here I need to do some modifications for the customization report.
So could you please tell me where do I start from.The changes that I did should be shown in the PDF PO report Output.
One more query is : How can I indentify this PDF PO report output belongs to which concurrent program?
Appreciate your help.
Thanks,
Radhika
Edited by: user10491126 on Dec 21, 2009 10:27 PM

Hi,
Welcome to forum !!!
Your buyer work center form basically points to standard PO functionality and bring all info in 1 page for buyer. Please check PO Output for Communication process for details.
One more query is : How can I indentify this PDF PO report output belongs to which concurrent program?
Ans : I believe "PO Output for Communication" ( it's a request in POXPOPDF module) which generate the PDF, its a Java concurrent program.*
Hoep this will help.
Regards :)
S.P DASH

Exporting to PDF fails for a report

Similar Messages

Maybe you are looking for