Exporting activity data as a PDF / sending as email from within package

Hello,
We are currently developing an E-learning package which involves the learners building up a check list on an "ipad" as they go through the course, which we would like them to then be able to save at the end of the course so they can review it later.
We've managed to implement a print function, however we really need them to be able to save this data in some way. Does any one know how we could push this data back to the LMS so it can somehow be downloaded and saved (in a good, branded format) or even better how we could make it into a PDF so it can be saved from with in the SCORM package or even in some way emailed.
Any help would be much appreciated.
Sam

hi
The funnier part is that
u can actually type in the sender's email id irrespective of the mail host used
Like @hotmail.com,@yahoo.com etc.
The receiver will get the mails from the email id that u wrote .
The problem u r facing is becoz of the incorrect mail host server ip address
Try to get in touch with the network admin for the mail server ip address
other way is
get the name it would be like
smtp.domain name .
hope that helps

Similar Messages

Sending an Email from within an Oracle Package

Hi,
I am trying to send an email from within a Oracle package Body. The code i have to do this is as follows: -
PROCEDURE send_mail(sender_in IN VARCHAR2,
recipient_in IN VARCHAR2,
date_from_in IN VARCHAR2,
date_to_in IN VARCHAR2) IS
-- Procedure to send e-mail
mailhost VARCHAR2(30) := '192.168.2.6';
crlf VARCHAR2(2) := CHR(13)||CHR(10);
--message VARCHAR2(32767);
message LONG;
mail_conn utl_smtp.connection;
reply VARCHAR2(512);
BEGIN
mail_conn := utl_smtp.open_connection(mailhost, 25);
message := 'Date: '||TO_CHAR(SYSDATE, 'DD-MON-YY HH24:MI:SS')||crlf||
'From: <'||sender_in||'>'||crlf||
'Subject: ''Holiday Request'||crlf||
'To: '||recipient_in||crlf||
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, sender_in);
utl_smtp.rcpt(mail_conn, recipient_in);
utl_smtp.data(mail_conn, message);
utl_smtp.quit(mail_conn);
EXCEPTION
WHEN others THEN
RAISE;
END send_mail;
end holidays;
I have one question though. I am getting a ORA-29278 SMTP Transien Error: 421 Service Nota Available Error. I think this may be due to the 'Mailhost' value I have given in the above code. I have been informed that this should be the ip address of the mail server used or the ip address of the machine if it is being run locally. What would i need to put in here if i wish for an email to be sent from one hotmail address to another for example?
Any help would be much appreciated!
Thanks!
Darren

hi
The funnier part is that
u can actually type in the sender's email id irrespective of the mail host used
Like @hotmail.com,@yahoo.com etc.
The receiver will get the mails from the email id that u wrote .
The problem u r facing is becoz of the incorrect mail host server ip address
Try to get in touch with the network admin for the mail server ip address
other way is
get the name it would be like
smtp.domain name .
hope that helps

Cannot send an email from within contacts on iPhone

I’m trying to send email from within my contacts list app on my iPhone but the send button will not highlight and therefore cannot be pressed to send the email. Sending email from the mall app works fine. Anyone know why this is happening?

That also occurs for me and looks like a bug. The problem seems to be that, although the "To" address appears in the draft email, the iPhone does not think that it is there and won't activate the Send button. If one simply touches the "To" field the address disappears.
Submit this as a bug at http://www.apple.com/feedback/iphone.html

Sending an email from within a program

Hi,
I am using SO_DOCUMENT_SEND_API1 to send an email from a program. Everything works fine, but the users don't want to see the popup message titled 'SAPconnect Send Process - List of Sent Objects'.
Is there anyway I can supress this message from the program, or is it a setting in SAPconnect?
Thanks
Lindy

If your are calling RSCONN01 after your function module then remove the submit of RSCONN01. This program will run scheduled every 1 to 5 minutes anyway as background job by the basis .
a®

Sending an email from my database

Hi!
I wanna send an email from within a procedure from my database, Im thinking of using the utl_smtp package, I know I need acces from my database server to the smtp server, that can be done... when u use the utl_smtp package u need to specify the smtp host, the email address of the sender, the email address of the receptor, and some other stuff, what I wonder is: Where do u specify the password of the email address of the sender?, I mean, it doesnt make sense that u use an email address to send an email and u dont specify the password of that account
In all the samples Ive seen all over internet I havent found something that tells me something about it...
Any Help???

A lot of smtp servers do not require a username/password when sending mail, only when receiving mail.
If you need verification, you can do it with utl_smtp:
utl_smtp.command( conn, 'AUTH LOGIN');
utl_smtp.command( conn, utl_raw.cast_to_varchar2( utl_encode.base64_encode( utl_raw.cast_to_raw( cuser ))) );
utl_smtp.command( conn, utl_raw.cast_to_varchar2( utl_encode.base64_encode( utl_raw.cast_to_raw( cpassword ))) );

In Responses, Can I export the data in a pdf form excluding null data?

In Responses, Can I export the data in a pdf form excluding null data?

Let me make sure I understand the request... There is a feature in the Response table to "Save Response as PDF Form" and you'd like to do this excluding the null data (unanswered questions). If that is correct it is not supported, the "Save Response as PDF form" will save a PDF that is the entire form filled out as the user filled it.
Thanks,
Josh

Sending an Email from the app along with table data

Hi All,
I would like to send an email from my app. I tried to put in the field attachment SQL this query: select * from Table_Name where id = (select max(id) from Table_Name) but it did not work. It showed me this error:
1 error has occurred
Wrong number of columns selected in the SQL query. See Help of attribute for details.
I would like to send an email every time the user insert a row with that row in the email... How can I do that?
Thank You.

What I would suggest is the following:
Build an After Insert Trigger on the table in question. In this trigger build a string with ALL the columns that are being inserted into the table. Then you will need to build some local variable to submit your mail. You will send your e-mail via UTIL_SMTP mail, since you may NOT always being in an APEX application when the table is updated..
Ask away if you have more questions..
Thank you,
Tony Miller
Webster, TX
I am a Ranger! We walk in the dark places no others will enter! We stand on the bridge and no one may pass! We live for the One, we die for the One!
If this question is answered, please mark the thread as closed and assign points where earned..

Sending An email from BSP

Hi All
i need to send an email from BSP application when check box is clicked .
I have the details such as pernr of an employeee by using this i need to retrieve email id of that employee and have to send an email to that employee with some text
1. How to retireve email id of an employee using pernr
2.How to send email from bsp application
Thanks

Hi ,
To get the Email for the given PERNR:
* Get the Communication detail from Infotype 0105
 SELECT
 USRID_LONG
 FROM PA0105 INTO
 RECEIVER_EMAIL
 WHERE PERNR = PERNR AND
 BEGDA <= SY-DATLO AND
 ENDDA >= SY-DATLO AND
 SUBTY = '0010'
Look at this code which will send a email from BSP..
DATA:
 SEND_REQUEST TYPE REF TO CL_BCS,
 DOCUMENT TYPE REF TO CL_DOCUMENT_BCS,
 SENDER TYPE REF TO CL_SAPUSER_BCS,
 RECIPIENT TYPE REF TO IF_RECIPIENT_BCS,
 EXCEPTION_INFO TYPE REF TO IF_OS_EXCEPTION_INFO,
 BCS_EXCEPTION TYPE REF TO CX_BCS,
 WA_MESSAGE TYPE BAPIRET2.
DATA:
 LEN TYPE I,
 TEXTLENGTH TYPE SO_OBJ_LEN,
 ITAB_MESSAGE TYPE SOLI_TAB,
 WA_SOLI TYPE SOLI.
*Load class defnitions
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
CLASS CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
* Create persistent send request
TRY.
 SEND_REQUEST = CL_BCS=>CREATE_PERSISTENT( ).
* Format the message content to be sent into internal table
 IF NOT MESSAGE IS INITIAL.
 WA_SOLI-LINE = MESSAGE.
 APPEND WA_SOLI TO ITAB_MESSAGE.
 ELSE.
 WA_MESSAGE-MESSAGE = `Enter some Message and then Click "Send Your Message" button.`.
 APPEND WA_MESSAGE TO RETURN.
 ERROR = 'X'.
 RETURN.
 ENDIF.
 LEN = STRLEN( MESSAGE ).
 TEXTLENGTH = LEN.
* Create document
 CALL METHOD CL_DOCUMENT_BCS=>CREATE_DOCUMENT
 EXPORTING
 I_TYPE = 'RAW'
 I_SUBJECT = SUBJECT
 I_LENGTH = TEXTLENGTH
 I_TEXT = ITAB_MESSAGE
 RECEIVING
 RESULT = DOCUMENT.
* Add document to send request
 CALL METHOD SEND_REQUEST->SET_DOCUMENT
 EXPORTING
 I_DOCUMENT = DOCUMENT.
* Get sender object
 CALL METHOD CL_SAPUSER_BCS=>CREATE
 EXPORTING
 I_USER = SY-UNAME
 RECEIVING
 RESULT = SENDER.
* Add sender
 CALL METHOD SEND_REQUEST->SET_SENDER
 EXPORTING
 I_SENDER = SENDER.
* Create recipient
 CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
 EXPORTING
 I_ADDRESS_STRING = RECEIVER
 RECEIVING
 RESULT = RECIPIENT.
* Add recipient with its respective attributes to send request
 CALL METHOD SEND_REQUEST->ADD_RECIPIENT
 EXPORTING
 I_RECIPIENT = RECIPIENT
 I_EXPRESS = ' '
 I_COPY = ' '
 I_BLIND_COPY = ' '.
 SEND_REQUEST->SET_SEND_IMMEDIATELY( 'X' ).
* Send document
 CALL METHOD SEND_REQUEST->SEND
 RECEIVING
 RESULT = SENT.
 IF SENT IS NOT INITIAL.
 COMMIT WORK.
 WA_MESSAGE-MESSAGE = 'Your Message sent Successfully!!!'.
 APPEND WA_MESSAGE TO RETURN.
 ELSE.
 ERROR = 'X'.
 WA_MESSAGE-MESSAGE = 'Your Message could not be sent. Please try again later'.
 APPEND WA_MESSAGE TO RETURN.
 ENDIF.
 CATCH CX_ADDRESS_BCS .
 CATCH CX_SEND_REQ_BCS.
 CATCH CX_DOCUMENT_BCS.
 WA_MESSAGE-MESSAGE = 'Your Message could not be sent. Please try again later'.
 APPEND WA_MESSAGE TO RETURN.
 ERROR = 'X'.
ENDTRY.
Raja T

Sending external email from SAP with following requirements...

Hi All,
       I need to send external emails from SAP by meeting following requirements.
1) With subject line more than 100 characters.
2) No attachments, only body which has specific format (blueprint/layout) and would be amended often, hence code shouldn't be touched during amendments.
3) Should be able to know the success/failure of mail sending at program level.

Hi,
The code below demonstrates how to send an email to an external email address
*& Report ZSENDEMAIL                                                  *
*& Example of sending external email via SAPCONNECT                    *
REPORT zsendemail                    .
PARAMETERS: psubject(40) type c default 'Hello',
            p_email(40)   type c default '[email protected]' .
data:   it_packing_list like sopcklsti1 occurs 0 with header line,
        it_contents like solisti1 occurs 0 with header line,
        it_receivers like somlreci1 occurs 0 with header line,
        it_attachment like solisti1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
data:   it_message type standard table of SOLISTI1 initial size 0
                with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*&      Form POPULATE_MESSAGE_TABLE
      Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform.                    " POPULATE_MESSAGE_TABLE
*&      Form SEND_EMAIL_MESSAGE
      Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform.                    " SEND_EMAIL_MESSAGE
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
      submit rsconn01 with mode = 'INT'
                    with output = 'X'
                    and return.
endif.
endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
Hope this helps.
Reward if helpful.
Regards,
Sipra

Sending the email from the sap gateway

hi,
           Any body please help me how to send the email from the sap end. what is the funcion module used for that one what the parameters need to pass for that function module.

Hi, check if below code is helpful
Variables for EMAIL functionality
DATA: maildata   LIKE sodocchgi1.
DATA: mailpack   LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead   LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec    LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1   LIKE solisti1 OCCURS 0 WITH HEADER LINE.
PERFORM send_form_via_email.
      FORM SEND_FORM_VIA_EMAIL                                      *
FORM send_form_via_email.
CLEAR:    maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = maildata
      put_in_outbox              = 'X'
    TABLES
      packing_list               = mailpack
      object_header              = mailhead
      contents_bin               = mailbin
      contents_txt               = mailtxt
      receivers                  = mailrec
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
ENDFORM.                    "send_form_via_email
     Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR:    mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
mailhead = 'TEST.TXT'.
APPEND mailhead.
File 1
mailbin = 'This is file 1'.
APPEND mailbin.
DESCRIBE TABLE mailbin LINES tab_lines.
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'TXT'.
mailpack-obj_name = 'TEST1'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
*File 2
mailbin = 'This is file 2'.
APPEND mailbin.
DATA: start TYPE i.
DATA: end TYPE i.
start = tab_lines + 1.
DESCRIBE TABLE mailbin LINES end.
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = start.
mailpack-body_num = end.
mailpack-doc_type = 'TXT'.
mailpack-obj_name = 'TEST2'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.                    "prepare_packing_list

To send external email from ABAP

How to send external email from ABAP Program and what are the settings to be done for the same ?

Please check..
Sending External email through SAP
What is the FM for sending the external email through SAP by attaching layout set to it?
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
How to send a report to an external mail-id?
Try this sample code :-
REPORT ZREPORT_TO_EMAIL NO STANDARD PAGE HEADING LINE-SIZE 200.
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.

Sending encrypted emails from the iPad is not working

I can't get sending encrypted emails working on my iPad3 running iOS 8.0.2
Let me explain what I did:
1. I created S/MIME certificates for 2 email addresses on my iMac in Keychain Access. One email address exists only on the iMac the other only on the iPad.
2. I set "When using this certificate" to "Always Trust" in both certificates.
3. I exported 1 S/MIME certificate (p12) and installed it on the iPad. Then I deleted this certificate and its private&public keys in iMac Keychain Access
4. I exchanged public certificates between the 2 devices. I installed one certificate in iMac Keychain Access and the other in iPad/Settings/General/Profiles.
5. On the iMac in the iPad certificate I set "When using this certificate" to "Always Trust"
6. I tested whether I can send and receive signed and/or encrypted emails
Results:
1. From the iMac I can send signed and/or encrypted emails to the iPad.
    On the iPad I can read the encrypted emails. The signature is not trusted
2. On the iPad I can send signed messages to the iMac. On the iMac the signature is trusted.
    I cannot send encrypted emails from the iPad to the iMac. The iPad doesn't know about the public certificate in iPad/Settings/General/Profiles
So much for the straight forward part. Now it gets a bit more complicated and confusing.
1. I deleted the iMac certificate in the iPad/Settings/General/Profiles. Then in iPad Mail I opened the signed mail coming from the iMac.
    I viewed the untrusted certificate in Mail and installed it. From this point on all signed emails from the iMac are trusted.
    Strangely the by this method installed certificate doesn't appear in iPad/Settings/General/Profiles.
    Furthermore I still cannot send encrypted messages to the iMac. This certificate installation seems to be used only to check trust worthiness of the signature.
    Installing on top the iMac public certificate in iPad/Settings/General/Profiles doesn't enable to send encrypted messages from the iPad either.
To be sure that this problem relates to the iPad certificate management and is not related to an error by me I did the following:
1. I transferred a p12 file for a certificate that I created in my iMac to a PC running Windows7.
2. I transferred a p12 file plus its public key (.pem) that I created in my iMac to another iMac into Keychain Access. (I have not tested if the pem is needed).
3. On the other iMac and the PC I made sure that the certificates are trusted.
    On the PC that means in the Certificate Manager the p12 needs to be in the "Personal" folder and in the "Trusted Root Certification Authorities" folder.
    The public keys need to be in the "Trusted People" folder and the "Other People" folder. One can just copy/paste the certificates.
4. In both cases I deleted the certificate and public/private keys on my iMac.
5. I exchanged public certificates between the devices.
6. I tested exchanging signed and/or encrypted emails between my iMac and the PC and my iMac and the other iMac.
Result:
1. I can send signed and/or encrypted emails to the other iMac and the PC
2. The PC and the other iMac trust the signature from my iMac and can read the encrypted emails
3. My iMac can read encrypted emails from the PC and the other iMac
4. My iMac trusts emails with signatures from the PC and the other iMac.
Everything is working as it should.
After the above test I wanted to see whether I can set up encrypted email exchange between the iPad and the PC. Strangely iPad Mail recognized the public certificate from the PC installed in iPad/Settings/General/Profiles and allowed me to send an encrypted email to the PC. However, on the PC I was unable to read the encrypted email. And the other way around, encrypted emails send from the PC to the iPad cannot be read on the iPad.
My conclusion from all this testing is that iPad mail encryption is still "under construction".

I was able to resolve the above described problem to some degree. Setting up sending and receiving encrypted emails between iOS and OSX I have working.
What is still not working is reading encrypted emails on the iPad/iOS8 received from Windows 7 PC. And sending encrypted emails to Windows 7 PC.
The details about how I solved part of the problem are described here.

Sending an email from a servlet

Hi Guys,
Im trying to send an email from a servlet. I am using the following code:
IMPORTING LIBRARIES
import java.util.*;
import java.io.*;
import javax.servlet.http.*;
import javax.servlet.*;
//importing JDBC
import java.sql.*;
//email
import java.net.*;
import java.text.*; // Used for date formatting.
BEGIN CLASS
public class Email3 extends HttpServlet
 private Socket smtpSocket = null;
 private DataOutputStream os = null;
 private DataInputStream is = null;
public void doPost (HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException
PrintWriter out = res.getWriter();
OUTPUT TAGS FOR WEBPAGE
 out.println("<html>");
out.println("<head>");
out.println("<title>FYP</title>");
out.println("</head>");
out.println("<body>");
out.println("<center>");
send email
 //Date dDate = new Date();
 //DateFormat dFormat = _
 //DateFormat.getDateInstance(DateFormat.FULL,Locale.US);
 String m_sHostName="localhost";
 int m_iPort=25;
 try
 { // Open port to server
 smtpSocket = new Socket(m_sHostName, m_iPort);
 os = new DataOutputStream(smtpSocket.getOutputStream());
 is = new DataInputStream(smtpSocket.getInputStream());
 if(smtpSocket != null && os != null && is != null)
 { // Connection was made. Socket is ready for use.
 out.println("Connection was made. Socket is ready for use.");
 //[ Code to send email will be placed in here. ]
 try
 { os.writeBytes("HELLO\r\n");
 // You will add the email address that the server
 // you are using know you as.
 os.writeBytes("MAIL From: <[email protected]>\r\n");
 // Who the email is going to.
 os.writeBytes("RCPT To: <[email protected]>\r\n");
 //IF you want to send a CC then you will have to add this
 os.writeBytes("RCPT Cc: <[email protected]>\r\n");
 // Now we are ready to add the message and the
 // header of the email to be sent out.
 os.writeBytes("DATA\r\n");
 os.writeBytes("X-Mailer: Via Java\r\n");
 //os.writeBytes("DATE: " + dFormat.format(dDate) + "\r\n");
 os.writeBytes("From: Me <[email protected]>\r\n");
 os.writeBytes("To: YOU <[email protected]>\r\n");
 //Again if you want to send a CC then add this.
 os.writeBytes("Cc: CCDUDE <[email protected]>\r\n");
 //Here you can now add a BCC to the message as well
 //os.writeBytes("RCPT Bcc: BCCDude<[email protected]>\r\n");
 String sMessage = "Your subjectline.";
 os.writeBytes("Subject: Your subjectline here\r\n");
 os.writeBytes(sMessage + "\r\n");
 os.writeBytes("\r\n.\r\n");
 os.writeBytes("QUIT\r\n");
 // Now send the email off and check the server reply.
 // Was an OK is reached you are complete.
 String responseline;
 while((responseline = is.readLine())!=null)
 { // System.out.println(responseline);
 out.println("responseline= "+responseline+" ");
 if(responseline.indexOf("Ok") != -1)
 //out.println("responseline"+responseline);
 break;
 catch(Exception e)
 { System.out.println("Cannot send email as an error occurred.");
 out.println("Cannot send email as an error occurred.");
 catch(Exception e)
 { System.out.println("Host " + m_sHostName + "unknown"); }
 out.println("</center>");
 out.println("</body>");
 out.println("</html>");
 out.close();
}//end class
it compiles fine, the connection was made ok but im not receiving the email. When the email is sent off the server reply does not seem to be Ok, as the print statement i tried there is not being executed. When i print the content of my responseline= variable before the if statement i get the following:
Connection was made. Socket is ready for use. responseline= 220 centaur.elec.qmul.ac.uk ESMTP Exim 3.16 #2 Thu, 09 Jan 2003 15:54:34 +0000
responseline= 500 Command unrecognized
responseline= 250 is syntactically correct
responseline= 550 relaying to prohibited by administrator
responseline= 500 Command unrecognized
responseline= 503 No recipient(s).
responseline= 500 Command unrecognized
responseline= 500 Command unrecognized
responseline= 500 Command unrecognized
responseline= 500 Command unrecognized
responseline= 500 Command unrecognized
responseline= 500 Command unrecognized
responseline= 500 Command unrecognized
responseline= 500 Command unrecognized
responseline= 221 Closing connection. Good bye.
Can anyone help?
Is there an easier way to send an email from a servlet?
Thanks
tzaf

It's not a matter of "easier way" to send mail from servlet...you are missing a crucial element in your code: authorization to send mail. You need something like this (some of which you have already so note what is different):
 Properties properties = new Properties();
 properties.put("mail.smtp.host", String3 );
 properties.put("mail.smtp.dsn.notify", "SUCCESS" );
 properties.put("mail.smtp.host", "mailservernamegoeshere");
 properties.put("mail.smtp.auth", "true");
 MyAuthenticator auth = new MyAuthenticator();
 auth.setUser("user whos account you want to use goes here");
 auth.setPassword("user password goes here");
 Session session = Session.getDefaultInstance( properties,auth );Here is the auth class:
class MyAuthenticator extends Authenticator {
 protected String m_strUser = null;
 protected String m_strPassword = null;
 protected PasswordAuthentication getPasswordAuthentication() {
 return new PasswordAuthentication(m_strUser,m_strPassword);
 public void setUser(String strUser) {
 m_strUser = strUser;
 public void setPassword(String strPassword) {
 m_strPassword = strPassword;

Sending an email from Lotus Notes release 5.0.4a

I need to write java code for sending an email from Lotus Notes release 5.0.4a.
Initially, I tried using Lotus Domino Toolkit for java, but the current release, "Lotus Domino ToolKit for Java/Corba release 5.0.8" is not compatible with the notes client/server we are using(5.0.4a).
Now, I am trying to use "Lotus Domino Toolkit 2.1" which supports notes version 5.0.3 and higher, but I couldnot find out how to use it to send email.
Is there are other way in which we can connect to Lotus Notes for sending email. I cannot use SMTP as the Lotus Notes administrator is afraid of security issues so there is no possibility that I can connect to Domino server using java mail API by enabling SMTP on the Domino server.
I would be thankful if somebody can help me to do this.

First off - This is very "off topic"
The Domino SMTP server is not hard to lock down. Any Notes Admin worth his/her salt should know how to do it. Try to persuade them to run the SMTP stuff using name and password authentication only, or restrict access to an IP address range. This is all easy stuff.
Otherwise DIIOP/CORBA is one way to go. If your toolkit jar files don't work with the server then try using the ones on the server. Look in %noteshome%\data\domino\java for the ncso.jar file.
This works for me on an AS/400 java VM to WinNT/Linux Domino servers of various versions.
How to create an email using this method is again not difficult. All you really need is a blank database template. You have to create a document with certain fields in it (all documented) and then save it. That's all there is to it.
Word of warning DIIOP is not very rapid and careless coding can create problems. Ensure that once you have finished a session you make sure you close it else you will have continual connection problems.
Try searching around the domino/notes groups on how to actually do this.
SH

How to send only email from workflow

Hi Guys,
I want to send an email from a workflow without sending a notification ... how do i do it ?
Thanks In advance
Tom.

Hi,
Two possible ways - neither of which I would recommend.
1 - Write a trigger on the WF_NOTIFICATIONS table, so that if the notification for the process that you require is sent, then you populate the mailer status column to 'spoof' the mailer into thinking that it has already sent it. That should suppress the email.
2 - Modify the flow to include an activity prior to the notification to change the recipient preferences to not receive email, send the notification, then change the preferences back.
Email is an "all or nothing" solution - either get email from everything, or get it from nothing. How are they planning on dealing with the notification that they are sent? If they are logging into the application to view the notification, then you could consider sending summary notification emails, and force the users to log into the application to view them all, rather than trying to adopt a half-and-half solution where some things come by email and some only come in the application.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Exporting activity data as a PDF / sending as email from within package

Similar Messages

Maybe you are looking for