Exporting an encrypted key using DESede that is compatible with openssl

I have been banging my head against this wall for a week now. I need to take an existing PrivateKey and store it in a PKCS#8 container using Triple DES. The only "successful" attempt I have had so far creates a container using pbeWithSHA1And3-KeyTripleDES-CBC wich is not even close to the same thing as des-ede3-cbc. I have a before/after dump using "openssl asn1parse ..." as a reference:
Non-working one:
    0:d=0 hl=4 l= 682 cons: SEQUENCE
    4:d=1 hl=2 l= 36 cons: SEQUENCE
    6:d=2 hl=2 l= 10 prim:   OBJECT            :pbeWithSHA1And3-KeyTripleDES-CBC
   18:d=2 hl=2 l= 22 cons:   SEQUENCE
   20:d=3 hl=2 l= 16 prim:    OCTET STRING      [HEX DUMP]:9950B90483C58D10807A8A4BEE7E6199
   38:d=3 hl=2 l=   2 prim:    INTEGER           :0800
   42:d=1 hl=4 l= 640 prim: OCTET STRING      [HEX DUMP]:FB5130BAA93B217C3D9CC157B48A3A470CExisting one (made using "openssl pkcs8 -topk8 -in temp.key -v2 des3"):
    0:d=0 hl=4 l= 710 cons: SEQUENCE
    4:d=1 hl=2 l= 64 cons: SEQUENCE
    6:d=2 hl=2 l=   9 prim:   OBJECT            :PBES2
   17:d=2 hl=2 l= 51 cons:   SEQUENCE
   19:d=3 hl=2 l= 27 cons:    SEQUENCE
   21:d=4 hl=2 l=   9 prim:     OBJECT            :PBKDF2
   32:d=4 hl=2 l= 14 cons:     SEQUENCE
   34:d=5 hl=2 l=   8 prim:      OCTET STRING      [HEX DUMP]:56E20E2561891C26
   44:d=5 hl=2 l=   2 prim:      INTEGER           :0800
   48:d=3 hl=2 l= 20 cons:    SEQUENCE
   50:d=4 hl=2 l=   8 prim:     OBJECT            :des-ede3-cbc
   60:d=4 hl=2 l=   8 prim:     OCTET STRING      [HEX DUMP]:903C92209EBA0B3A
   70:d=1 hl=4 l= 640 prim: OCTET STRING      [HEX DUMP]:0C6033115F1AEF6724E1I just need some basic help on getting from the PrivateKey to the output that will work with openssl.

The only "successful" attempt I have had so far creates a container using pbeWithSHA1And3-KeyTripleDES-CBC wich is not even close to the same thing as des-ede3-cbc.What do you mean "not even close"? They certainly have different numbers of letters in their names, but cryptographically they are very similar.
Non-working one:What doesn't work about it?
I just need some basic help on getting from the PrivateKey to the output that will work with openssl.The example I provided in the earlier thread works just fine with openssl.

Similar Messages

My Snow Leopard 10.6.3 has Safari 4.0.4 but this cannot be used for the new features of iTune. I tried upgrading to Safari 5.1.7 but it needs Snow Leopard 10.6.8. Where can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?

My Snow Leopard 10.6.3 has Safari 4.0.4 but this cannot be used for the new features of iTunes. I tried upgrading to Safari 5.1.7 but it needs Snow Leopard 10.6.8. Where can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?

Hi..
here can I get a version of Safari 5.1 that is compatible with Snow Leopard 10.6.3?
Not possible. You need to update to v10.6.8
Click your Apple menu > Software Update
Or update using the this download > Mac OS X 10.6.8 Update Combo
Then restart your Mac.

My Extensis suitcase 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and CS software

my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?

If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.

TS3479 I have a iMac mid 2011 with Mac OSx Lion 10.7.4. I was using iMovie suddenly today I found iMovie is not starting a window is popping up saying "iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics ca

I have an iMac Mid 2011 model intel i5 with AMD Redeon HD6750M 512 MB graphic card, 8 MB RAM.
I was using the imovie the other day and down loaded some of the vedio clips from Sony camcorder.
All of a sudden today while I was trying to open the iMovie it did not a window poped up saying that
iMovie requires requires a graphic card that is compatible with Quartz Extreme................
What is these nonsence thing happening ........
Can any body provide some clue how to resolve the issue
Thanks and regards in advance
Bijan

If it was previously working then try a smc and pram reset.
If that doesn't fix it then see if vlc can handle the video.

I cannot open iMovie - it says I need a "Graphics card that is compatible with Quartz Extreme" I know this is wrong- Have iMovie version 9.0.4, regularly use it and have not had this problem before

Details: On my MacBook Pro, I have MacOS X 10.6.8, a 2.26 GHz IntelCore Duo processor with 4 GB 1067 MHz DOR 3 Memory.
I have iMovie Version 9.0.4, which I apparently updated inJuly. I regularly used iMovie, and last used it about 3 weeks ago. However, Today, when I try to get into iMovie, I get thefollowing message:
“Quartz extreme Required iMovie requires agraphics card that is compatible with Quartz Extreme. One or more of your graphics cards does ntosupport Quartz Extreme.”
So, I cannot get into my iMovie. I know the “Quartz Extreme” message ismistaken. WHAT DO I DO?

I would recommend that you turn off and restart your Mac. That should clear it up.

Hi, I've got an imac using mac os x version10.4.11, does anyone know of any printers that are compatible with this operating system version?

Hi, I've got an imac using mac os x version10.4.11, does anyone know of any printers that are compatible with this operating system version?

Yesterday I set up a Canon IP3600 to work on a PowerBook G4 running OS 10.4.11. It is a print-only unit. I got the 10.4 drivers off the Canon website before connecting the printer. Many Brother printers still have support for older Mac OS versions.
If you need a multi-function device, it is gettng very hard to find any that support PowerPC Macs (pre-2006) of OSX versions older then 10.6 any more.
As you posted in the PowerPC iMac forum I assume you have one. However, there are some Intel Macs (2006 and newer) still running 10.4. Check "About this Mac" under your Apple menu: if it says you have an Intel processor, you have many more doors open.

When I bought my Mac they gave me a free hp printer. My mac is a 10.7 and the printer is for 10.6 and below.... so why did they give me this printer? Can I use it somehow or should I ask for a different one that is compatible with my computer?

When I bought my Mac they gave me a free hp printer. My mac is a 10.7 and the printer is for 10.6 and below.... so why did they give me this printer? Can I use it somehow or should I ask for a different one that is compatible with my computer?

Can I use it somehow or should I ask for a different one that is compatible with my computer?
No, that's not necessary.
You Mac most likely sat in inventory before it was sold so the latest drivers were not installed.
If you tried using the printer and couldn'tget it to work, go here > http://www8.hp.com/us/en/support-drivers.html
If this is a USB connected printer, make sure it's connected to your Mac, then at that link click: Detect Your Product
Download and install drivers for v10.7 / Lion.

Multiplexer that's compatible with Encore

Encore seems to require some special data in the multiplexed file. For muxed file output directly by AME, it will read them properly and both video and audio work fine, jsut as if separate video and audio files are used.
However, if AME produces separate video and audio and then muxed by other softwares, it will run into problems.
For DVD/MPEG, I used ImagoMPEG-Muxer. The muxed mpg file will show as video only in Encore.
For Blu-ray/H.264, I used tsMuxer. The muxed ts or m2ts file will carry both video and audio but Encore will have to transcode the video.
I can live with the DVD/MPEG from AME as it works properly. However, Blu-ray muxing in AME forces 35 Mbps CBR.
http://forums.adobe.com/thread/894499
Does anyone know what's the magic in the AME muxing? Is there a muxer that's compatible with Encore?
Thanks!

I have no problems using VLC to play my AME .mp4 exports. But no, most playback software won't play two files at the same time. If you want that, create an export with audio.
But for authoring in Encore, it's still best to create two separate files.

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

Thanks, PAHU, for providing the Australian site for the Canon driver. I have an MP500 and it still seemed to print fine after I downloaded Yosemite. However, as others have reported, the MP Navigator no longer performed normally in scanning. The "Save As" keys didn't align and therefore didn't work but one could still scan using an alternative method ("Scan with scanner driver" button).
In any case, my hard drive subsequently failed on this 2010 27" iMac and when it was replaced the tech installed Yosemite 10.10.1. Just tried printing this evening and it wouldn't. Advised I needed undefined "software." Got various error messages. Went to Google and read this and downloaded that to no avail. Tried the Gutenprint driver but it too didn't work. Latest error was "stopping job because the scheduler could not execute a filter." Had no clue what that meant! System info listing for the printer (under About this Mac, System Info) lacked any reference to permissions or a printer utility version (but I didn't notice or know significance of omissions). Finally I downloaded from the Australian site, just the print driver 10.51.2. The printer then printed!!! (The MP Navigator scanner remains flawed but works by clicking "Scan with scanner driver" rather than the normal way.) I'm holding my breath that things will continue to work.
Thanks again, PAHU, for your help, and Greg and Pam and Andy too!

How can I set up a database program for inputing baseball team statistics that is compatible with numbers?

I have been asked to be a statistician bar and athletic team. We are playing Dartball, a game of darts that is based on baseball. The previous status station used Apple works which included a database manager that was compatible with numbers. I have checked with the Apple geniuses online for my MacBook Pro and they did not have an answer to my problem. Is there a program that can be used on my MacBook Pro that will keep up with statistics for eight baseball team?

Im all for the dumb questions, because its probably a dumb mistake I did.
I have checked that both sus ped and exp. ped are fully plugged in.
Neither pedals show up in the Midi meter in the transport.
I dont know how to set a patch for the keyboard, but if both pedals work in other programs (i.e. Reason), wouldn't it not be an issue with a Logic configuration and not in the keyboard's setting? (Unless I have a separate Logic setting that loads automatically when it detects Logic is booted. I dont know how that would work though.)
Thank you for your prompt help, though. Any other ideas?

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
http://www.switcheasy.com/products/CoverBuddy/
I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

Is there a version of iTunes that's compatible with XP Pro x64?

At this time I don't want to upgrade to Win 7 or go back to 32-bit XP, since iTunes is the only application I'm having trouble with and I like XP Pro x64 in all other ways. Is there either a version of iTunes that's compatible with XP Pro x64, or can one of the other versions be modified to make it compatible? Thanks.

Thanks! The procedure worked great for me (using iTunes 10), however there was one caveat. I also had to edit “AppleMobileDeviceSupport64.msi” with Orca and change the entry in “LaunchCondition” from
VersionNT64>=600
to
VersionNT64>=501
in order for the Device Manager driver update procedure to work, and iTunes to recognize my iPhone4. Prior to doing this, only “digital still camera” was displayed in the “imaging” entry in Device Manger. Once I did the above, “Apple Mobile Device USB Driver” was listed, and the procedure worked as written.

Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista

I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
Or, am I just misinterpreting this?
Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
Daddy-O
One should welcome adversity as an opportunity to excel.

Hi Daddy-O,
Thank you for contacting National Instruments. This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable. In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver. This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward. Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here. From this installer, you should be able to select FieldPoint 6.0 and install this software.
I hope this helps! Let me know if there is anything else I can clarify. Have a great day!
Jason W.
National Instruments
Applications Engineer

I have received the alert that my version of Safari no longer supports Youtube viewing. I am running version 5.1.10 on OS 10.6.8. Is there an update or a newer Safari version that is compatible with my OS?

I have received the alert that my version of Safari no longer supports Youtube viewing. I am running version 5.1.10 on OS 10.6.8. Is there an update or a newer Safari version that is compatible with my OS?

No, not without upgrading to a higher version of the Mac OS. However, the easiest thing to do is get another browser for use with sites that don't like older versions of Saari. I always have a secondary browser on any computer, Mac or PC. For our Macs, I install FireFiox alongside Safari when setting up a new computer.
As FireFox is updated sometimes weekly, YouTube should not have a problem with it.
https://www.mozilla.org/en-US/firefox/all/

The Firefox checking system says that Shockwave Flash 10.1.82.76 (10.1.r82) is VULNERABLE and I should immediately update it. When updating I can find no higher version of Shockwave Flash that is compatible with my system. What should I do ?

1. I have an eMac running Mac OS 10.5.8
Processor Name: PowerPC G4 (3.3)
Processor Speed: 1 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 256 KB
Memory: 1 GB
Bus Speed: 133 MHz
2. I use Firefox 3.6.24 as my browser
3. The Firefox checking system says that the version of Shockwave Flash that I have installed, namely 10.1.82.76 (10.1.r82), presents a security VULNERABILITY and that I should immediately update it or disable it. On attempting to find an update I cannot locate a higher/more advanced version of Shockwave Flash that is compatible with my system. What should I do ?
Thankyou for any assistance.

The latest version for your system seems to be Flash 10.1 r102
Flash Player 10.1 Release Notes: (latest version for Mac PPC)
* http://kb2.adobe.com/cps/838/cpsid_83808.html
See (Released 11/04/2010) Flash Player 10.1.102.64 and 9.0.289.0 (126 MB)
* http://kb2.adobe.com/cps/142/tn_14266.html Archived Flash Player versions

Exporting an encrypted key using DESede that is compatible with openssl

Similar Messages

Maybe you are looking for