Exporting an HD movie to Standard DVD, best format?

I've been editing for awhile but just made the switch to an HD camera (Canon XH A1). I imported footage (as HD footage) and edited it in FCP, now I wonder how I should export it. I did it using "current settings" and it would only go into DVD Studio Pro as an HD project. It was shot at 24p, what's the best way to export it for standard DVD use? I'm just not sure what settings to use...

#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it amd select the top option "first play".
5. Now drag your QT from the broswer and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.
Shane

Similar Messages

Export to play in a standard dvd palayer

Hi!
I have made a movie and I would like to play it in a standard dvd player with the best quality possible. I do not need any menus or trailers before the movie starts, just play stright as I push the play.
How should I export and record the movie from FCE to do it? I'm a bit lost with formats. I'm in Europe, does it make any difference?
Thanks in advance for your answer

You export to QuickTime Movie. You take the exported file to iDVD.
Do a forum search on the iDVD. I'm sure you'll be able to find how to make a first play movie with that software.

Teaser and movie on 1 dvd - best workflow ?

I've created a 23 minutes movie. Exported it in 1080p/25 fr mp4
I've created a 1 minute trailer (with save as 'trailerxxx', so new project, and deleted everything I didn't need and add want I want in the teaser). Exported also in 1080p/25 fr mp4
So both files were ok for viewing on multi-mediadisc/tv screen in 1080p
Now people ask me for a dvd. Because I know that dvd has a maximum quality/size and the movie is only 23 minutes I wanted to add also the teaser on the dvd.
What I did (because I don't know better :-) ) was making a third project, I added the 2 exported mp4 files (teaser and movie) and created dvd menu, headings and exported to dvd format and burn dvd.
Everything worked but I presume that this workflow is not ideal to get best quality dvd ? I suppose that for qualityreasons it's better to work with the projectfiles ?
But how can you do this (making a third project from 2 others without using the exportfiles).
Or is there no difference in quality if you just use the exported files like I did ?

I use PE11 dutch version
PC MEDION® AKOYA® PC P5368 E
Windows 7 home premium 64b
CPU-type
Intel Core i7 3770
ram
8GB
Geheugentype
DDR3
motherboardchipset
Intel H61
bus hd
SATA-600
Optische Drive Type
DVD+/-RW DL
Videochip
GeForce GTX 560
Opslagcapaciteit
64GB
Hardeschijftype
Solid State Disk
Opslagcap. tweede schijf
1,5TB
Hardeschijftype tweede schijf
7200rpm
Teaser has his own menubutton, but don't play auto before movie. But in this case that's not necessary. I don't want people to force them to see the trailer (if you had seen it, you would agree :-) lol )

Exporting Closed Captions in Premiere Pro CC, best format?

What is the best format to use when exporting a movie accompanied by closed captions (either embedded or in a sidecar file) that would play in QuickTime Player or VLC? The standard of my captions is CEA-608?
I am a rookie and don't have a lot of experience with PPCC. The quality of the video does not have to be particularly high.
Steve

To get the captions to show in QuickTime Player, you definitely want them embedded. That limits your choice of encoding format to QuickTime, MXF OP1a, and DNxHD MXF OP1a. And while I'm no expert on which formats QuickTime Player supports, it does not appear to like the MXF clips I showed it. So I'd say go with QuickTime as the format, pick the preset that best matches your source content, and set Captions to embedded.

Outputting to DVD - Best Format?

I am new to Premier Pro and have a Canon Vixia HF-R50. My footage was filmed at 60P (AVCHD) and I want to output to DVD (non-Blue ray). What is the best format for this?
Fantastic forum here, btw

As long as you export a compatible file from Premiere Pro (MPEG2-DVD works) you may continue to use Encore CS6 as long as you have a computer and operating system that will run the program
Since it currently appears Adobe is not going to spend the time/money to build an Encore replacement "from scratch" you will have to look elsewhere
I do NOT use these, so have NO idea if they will do what you need
Encore alternative http://www.sonycreativesoftware.com/dvdastudio
-or http://www.sonycreativesoftware.com/dvdarchitectpro
-or http://www.deskshare.com/dvd-authoring-burning-software.aspx
-or http://www.videostudiopro.com/en/ replace PPro and Encore
PS - it was NOT Adobe's decision - see #8 here for why http://forums.adobe.com/thread/1337952?tstart=0

Movies from Standard DVD

I have lots of old VHS tapes that I want to get coverted to DVD, both to protect the content and to make it easier to edit content in iMovie, and get rid of a lot of crappy video. The video transfer service charges $9.95 to convert one tape to "normal" DVD, and $30.00 to convert to a MOV file.
Can I use the normal DVD's to pull content into iMovie and edit, or do I need to spring for the $30.00 . This would total $1500 bucks so.......
Thanks. Gil

I use iMovie 06 with iDVD 08.
To get your VHS video into iMovie 06, look at the Canopus ADVC300. Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06. The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source and convert it to FireWire.
http://www.canopus.com/products/ADVC300/index.php
There is also the ADVC110 less money but not as good.
http://www.canopus.com/products/ADVC110/index.php
iMovie 06 is a free download to iLife 08 owners. (THEY WANT YOU TO HAVE IT!)
http://www.apple.com/support/downloads/imovieHD6.html
iMovie 06 and iDVD 08 is a terrific combination.
The Web site below has a good comparison of Apple video products.
http://www.geethree.com/slick/imovie8.html

How do I best compress a multi file project in Encore CS5 to fit a standard DVD?

Hello,
I have created a series of small films in Final Cut Pro X, they have been exported as seperate audio and video tracks, ac3 audio and mpeg video from the presets in FCPX.
I want to use Encore CS5 to create DVDs out of them and I have used it before but only know the basics. The problem is that after I import all the media files, that I want on the first DVD, as assets and put them on the timeline it adds up to 7.23 GB, even though the time is just under 2 hours. I know that that might be pushing it a little bit in regards to the amount of time that I can fit on a regular 4.7 GB DVD, but it should't take up that much space. I removed a bunch of files from the timeline to see what I could fit and only got just under 1 hour. I can see that it is possible to decrease the file sizes, for instance by going to 'file'-'edit quality presets' and doing stuff there, but 'm not sure of the best way to do that.
In other posts I have seen mentions of encore compressing files to fit automatically, but what i want is a way to fit all the video files, not the audio i guess, to a dvd with minimum quality loss. does anyone know the best way to do this?
the only thing i can think off is either to use more DVDs than I feel that I should have to, or to burn a 7.23 GB image and then shrink that using soomething like DVD shrink, but that seems unecessary.
So I have a feeling that there is a smart way to do this and would appreciate any help.
Thanks. Nik

hello,
Firstly: John, if I export as a .mov and then import to Encore and transcode there will that mean that the file will be shrunk with minimum quality loss? because the .mov file i get using a simple movie export is massive.
below follows my findings and more questions. I suppose I should maybe be moving over to a FCPX & Compressor 4 forum. I think I need to do some studies on Bitrate here.
I tried the option of automatic transcoding in Encore to fit all files on a DVD and the results weren't terrible, in fact they are almost good enough, but not quite. it's sequences with fast movement that really are affected. So Stan, not much difference.
the problem is that the footage i am working with is pretty poor quality to start with. I am working with a bunch of Super 8 family films that have been scanned on to DVDs.
In FCPX a film that is 32 Min Pal SD 25p surround sound keeps coming out way to big. Below are some examples:
-When I export directly from FCPX as a movie (.mov) with the simple export settings and 'keep current settings' the file ends up being a massive 11.16 GB! With all other setting options the file is also expected to be very big ranging from something like 2.3 GB to 23GB.
-When I send it to Compressor 4 and choose the 'SD video sharing' option for uploading online it ends up at 1 GB. These are the settings and summary:
Name: SD Video Sharing
Description: SD for upload to web sharing sites such as YouTube and Vimeo
File Extension: mov
Estimated size: 783.36 MB/hour of source
Audio Encoder
    AAC, Stereo (L R), 48.000 kHz
Video Encoder
    Width and Height: Up to 640 x 360
    Pixel aspect ratio: Default
    Crop: None
    Padding: None
    Frame rate: (100% of source)
    Frame Controls: Automatically selected: Off
    Codec Type: H.264
    Multi-pass: On, frame reorder: On
    Pixel depth: 24
    Spatial quality: 75
    Min. Spatial quality: 25
    Temporal quality: 50
    Min. temporal quality: 25
    Average data rate: 1.741 (Mbps)
-When I export the film under the standard DVD export settings I get two files and sizes, one for audio (.ac3) 108.4 mb and one for video .m2v 1.89 GB. The general video setting summary follows:
Name: MPEG-2 for DVD
Description: MPEG-2 elementary stream for DVD Authoring
File Extension: m2v
Estimated size: 1.89 GB
Type: MPEG-2 video elementary stream
    Usage:SD DVD
Video Encoder
    Width and Height: Automatic
        Selected: 720 x 576
    Pixel aspect ratio: PAL CCIR 601
    Crop: None
    Padding: None
    Frame rate: (100% of source)
        Selected: 25
    Frame Controls: Automatically selected: Off
    Start timecode from source
    Aspect ratio: Automatic
        Selected 4:3
    Field dominance: Automatic:
         Selected Progressive
    Average bit rate automatic,
        selected: 7.826087 (Mbps)
    1 Pass VBR enabled
        Maximum bit rate: 9 (Mbps)
    High quality
    Best motion estimation
    Closed GOP Size: 12, Structure: IBBP
    DVD Studio Pro meta-data enabled
well thanks for the help both of you. it seems that outputting way too big files might be one of the many annoying bugs of FCPX.

My purchased I-tunes songs will not import to I-Movie or I-DVD

Just recently every time I export a purchased I-Tunes song to I-Movie or I-DVD, I get a pop-up saying that the song is not authorized to be played on my computer. Even though the all the purchased songs play fine while in I-Tunes itself they will not export to I-Movie or I-DVD. Each time the pop-up comes up to authorize the song, I go through and authorize it, and it tells me it was successful. It lied. The songs still do not export even though I authorized the computer. I have noticed to a tiny little lock in the upper left hand corner of the icon for the songs, but only for the purchased songs. I think that may be part of the problem. I'm not alone with this problem. I have spoken with other frustrated people with the identical problem. The purchased songs exported just fine until recently. I was told by a computer nerd that the problem lies with quicktime which doesn't allow I-tunes to export to I-Tunes or I-DVD. Apple Support was not helpful. Does anyone know how to fix this problem. Thanks

It is a known problem as mentioned in the iMovie or iDVD forums. See thread below look at the 2nd post for the workaround.
http://discussions.apple.com/thread.jspa?messageID=5262137&#5262137

Best format to import and edit?

So, I'm using Premiere Pro CS6, and am quite new to video editing. The only editing program I have experience with is Final Cut Pro 10, which I have been told that .mov files are the best formats to import into that program. However, I'm not sure what format is optimal for Premiere Pro CS6, provided there even is one. Also, is there a "better" format to use when exporting your video (the video will be uploaded to YouTube).

You can import all kinds of formats.
If you have mov import that, if you have avchd import that too.
No transcoding, all edited native.
Watch this movie below how to set up and edit.
For YT use a H.264 preset for export.
Get Started with Premiere Pro
New to Premiere Pro? Get started with your first project — editing a video. In less than an hour,
you'll learn to edit together different types of media to tell a video story.

What is the best export setting from QuickTime Pro 7 for standard DVD

I have several AVI movies I took and want to import them into iMovie, so I can create a DVD that will play in any DVD player or computer. (Along with a bunch of pictures.)
Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
I have export them using *_QuickTime 10_* and QTP7 to *MOV, MP4, & M4V* and the output is *+bad bad bad+*.
I have tried both export and save-as. Neither has done a good job.
The internal information of the AVI movies are: (as reported by QT)
Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
I have used several settings with not much luck including:
AAC, Stereo (L R), 44.100 kHz, MPEG-4 (Perian), 640 x 480, Millions
MPEG-4 Video, H.264
Should I be using a better application then QuickTime?
Is there a way to just use iDVD with the original AVI movies?
These are wedding movies and pictures that people are waiting for.

Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
That depends on your specific work flow and the codec(s) involved. Generally speaking, if the file plays in the QT Player and is "conversion" compatible, then the file can be added directly to iDVD (i.e., unlike iMovie '08/'09/'11 which requires the file to be "edit" compatible with QT).
I have export them using QuickTime 10 and QTP7 to MOV, MP4, & M4V and the output is bad bad bad.
The quality of your output file will depend on a number of things: primarily the quality of your source file, the efficiency of the target codec, and the specific settings used. (About which you did not elaborate.) The rule of thumb here is that your output will never be better than your input and each re-comprssion of the data has the potential to degrade the quality to some degree.
I have tried both export and save-as. Neither has done a good job.
The "Export" option re-compresses the data while the "Save As..." option only places the original data in an MOV file container. So if this output is "bad, bad, bad," then I suspect your source file(s) are not of high quality to begin with. (This seems to be confirmed by the very low audio sampling rate which implies the video data rate was probably also low to conserve file storage space.)
The internal information of the AVI movies are: (as reported by QT)... Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
The basic codecs here appear to be both playback and conversion compatitible with QT (other than the very low sampling rate which some QT apps may not like). Thus, if your work flow is to simply burn DVDs that can be played on commercial players, the AVI could most likely be dropped to iDVD for authoring. On the other hand, if you are editing in a recent version of iMovie, then that app may not like the AVI file container. In this case, the best quality you can likely expect would be to use the "Save As..." option to place the data in an MOV file container and import to iMovie.
Unfortunately, editing in iMovie '08/'09/'11 is done "by reference" which means your output file will be created by exporting the impoted source data to another compression format. The default would be H.264/AAC which is a highly compressed format which in turn would be re-compressed again by iDVD to multiplexed MPEG2/PCM content further reducing quality by using a less efficient video codec. My recommendation for export from iMovie in this case would be AIC/Linear PCM. (I.e., to export your edits to the Apple intermediat video codec using the original file size and frame rate with just a bit of "sharpening" and using 16-bit/48 kHz Linear PCM audio (which is what will be used to create the DVD).
Should I be using a better application then QuickTime?
How much are you willing to spend?
Is there a way to just use iDVD with the original AVI movies?
Yes. Simply create a new SD project, select your theme, drop the compatible AVI content to the appropriate "drop" area(s), add photos as desired, preview the results, and author the DVD if/when satisfied.

What is the best workflow procedure for importing DV SP 16x9 footage into FCP7 and then exporting the best quality 16x9 to standard DVD so that it looks great (or at least good) on a 50" Samsung LCD TV ?????? Please help! anybody?? Thanks!

We are using a Sony HDV-Z7U camera for acquisition. We recently recorded an event using the camera's non HD capabilities. We set the camera to record "DV SP" 16x9 settings on both Mini-DV tape and CF card.
To import the DV SP footage into FCP7 we chose the "DV NTSC anamorphic" setting in the log and transfer settings window. After a successful transfer from the CF card (the CF card held approximately 83 minutes) we checked the size of the file and found it to be 16 Gigs! Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
We need to burn DVDs of this show - we sent it to compressor and got horrible quality.
What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def. footage and what is the best method for exporting for outputting this footage to DVD that preserves the original quality of the DV SP footage?? Anyone? Many thanks

> Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
No it doesn't. DV is 13GB per hour.
In any case, a Video DVD uses the MPEG 2 codec, not DV.
>What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def.
DV NTSC anamorphic.
>what is the best method for exporting for outputting this footage to DVD...
Use the Compressor DVD preset "Best Quality 90 mins".
>...that preserves the original quality of the DV SP footage?
Not going to happen, you are compressing by a factor of 1:4. Shooting as HDV would have given you better quality material to start with. DV is at the bottom end of the scale.

Best export settings for HD video to DVD

hello, I now use premier pro cs5, from cs4 on my mac, love it, but I shoot with a cannon XL H1s HD video, my questiion is when viewing video from camera or on the screen in cs5, perfect hd picture, but when I export to DVD, i see in the media encoder if I choose mpeg2-DVD it goes output to 720x480, how do I export to dvd for the best HD seetings for DVD to get a HD playback on the DVD, now I see an OK video on the TV playback, but not the same as the original recording, can anyone help,, thanks in advance for any help.....

I found (via a friend who is experienced in Pr & En) that it all comes down to the export/authoring settings.
In Pr, my export settings needed to be adjusted as follows:
Format: MPEG2-DVD
Preset: PAL Progressive Widescreen High Quality
Selected 'DVD' in the Basic Settings section of the
Multiplexer tab (this creates a single mpeg file rather than a m2v file which has a separate video and audio file)
Selected the highest possible quality (5) in the Basic Video Settings section of the Video tab, changed the TV Standard to PAL (to suit Australian TVs) and then
Set the minimum/target/maximum bitrate settings to 8Mbps (when I set it at 9Mbps, the final file had too high a bitrate for DVD)
In the Audio tab, I selected PCM as the audio type.
I also ensured that the Use Maximum Render Quality checkbox was ticked at the bottom of the export settings window.
Then I exported.
Once encoding was complete I opened Encore, started a new project, selected DVD as the authoring mode and PAL as the Television Standard within the Basic settings for the new project. I then imported the final mpeg file as a timeline into Encore, set all the appropriate first play/title button/end play functions as necessary, then I opened the Edit Quality Presets window from the File menu and made the following settings;
Format: MPEG2-DVD
Presets: PAL DV High quality 8Mb CBR 1 Pass
Basic Video Settings - Quality: set to maximum (5)
Basic Video Settings - Field Order: None (Progressive)
Basic Video Settings - Pixel Aspect Ratio: Widescreen 16:9
Basic Video Settings - Bitrate Settings - Bitrate [Mbps]: set to maximum (9)
Basic Audio Settings - Audio Format Settings: Audio Format: PCM
click OK
Then I authored the DVD and was quite pleased with the result. Still not quite to the quality I was hoping for (i.e. the quality of a DVD movie), but still a significant improvement on my initial attempts using default Pr & En settings.
Hope it helps

Best options for exporting a sequence and making a DVD

Hello,
I have a sequence that is 79 minutes long with the following properties:
Vid Rate - 29.97 fps
Frame Size - 1440 x 1080
Compressor - Apple Int. Codec
Pixel Aspect - HD (1440x1080)
This project began with the intention of being a short video, which is my background, and I can usually deal with exporting issues for short videos. However, it is no longer a small project. This was unexpected, and I frequently find myself in over my head. I am at the point where I need to give small theaters copies to view for consideration for a real screening, and would like to ask the folks here some questions:
How would you export this sequence for viewing on a DVD? Export through QuickTime Movie (not conversion)? Wouldn't that make a file too large to create a DVD with iDVD? DVD is only SD, yes? How is that (watching on a DVD) taken care of, if at a later time I would want a DVD of this sequence to be in the best quality possible?
This is a lot of questions, and I hope not too vague. Thank you for your time, and thanks in advance for any help.

Hi
My notes on this
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R (plays on more even older DVD-players)
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
If problems:
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Hello. How do I get my FCP sequence into DVD Studio Pro? I've tried exporting as QT movie, then importing as asset, am told format is incompatible.

Trying to get my HD sequence in FCP to burn to DVD. How to accomplish this? I export sequence as Quicktime movie, try to import as as asset, after a couple minutes a window says "format incompatible" or something to that effect.
Also, in FCP the canvas only shows timeline video when it's playing. When stopped, blank screen -- how do I fix this?
Many thanks.

#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it amd select the top option "first play".
5. Now drag your QT from the broswer and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

How downsize a 112 GB .mov file in DVDSP to fit standard DVD?

Help, please. I burned a Quicktime .mov file from HD footage off my FCP 7 timeline. The resulting file is 112 GBs. I took it into DVD Studio Pro as I thought DVDSP would downsize the file to fit on a standard DVD. But the Disc Meter shows the size to be 6.2GB. I went into Preferences to lower the bit rate, but it had no effect on the size. It is still 6.2GB.
Is there a place in DVDSP to adjust the setting to fit the file so DVDSP will burn it? Or will I have to first take it through Compressor?
Thanks! Duncan

I did a test, and I think it would be very helpful for all of us if anybody else could reply to this with their experience/comments.
I started with an hour long project in HD. Then did the following:
1. Dragged HD sequence from Browser into an SD timeline. Rendered. Exported video (in this case, just a short 1 minute clip for testing). Burned this clip to SD DVD via iDVD.
2. In original HD sequence I exported a short 1 minute clip. Dragged this clip into Compressor with DVD settings. Let it process and then burn to DVD from within Compressor.
RESULTS: ON SD TV: There is not much of a difference in quality (at least not on a typical 20-some inch TV), HOWEVER, on an HD TV, the Compressor version (#2 above) looks far better than version #1 above. When viewing the video on an HD TV, the video from version #1 is virtually unusable. I would not even give it to a client. Image quality is very bad. Version #2 still looks not very good but it is far better than the other.
I have not tried using DVD SP pro yet to see if there is any difference.
Hope this helps and would love to hear other experiences.
Eric

Exporting an HD movie to Standard DVD, best format?

Similar Messages

Maybe you are looking for