Exporting build - destination devices radio buttons are not there

I created an ios project using flash builder 4.5. but when i go to export a final build the target device radio buttons are not there on the interface. it has to be an installation issue but i've uninstalled and reinstalled multiple times with no success. has anyone else had this issue?
thanks

here is a screen shot

Similar Messages

Radio Buttons are not getting populated

Hi
this is my program...
plz can any one tell me wt is wrong in my program?
my problm is wn i select " 2 line 2 " in drop down list Radio button 1 and Radio Button 2 should be
invisible and it should display only Radio Button 3....
bt in my program it is not happening....
TABLES: sscrfields.
DATA: name TYPE vrm_id,
      list TYPE vrm_values,
      value LIKE LINE OF list.
PARAMETERS: ps_parm AS LISTBOX VISIBLE LENGTH 10 USER-COMMAND abc.
PARAMETERS: r1 RADIOBUTTON GROUP ab MODIF ID bl2,
            r2 RADIOBUTTON GROUP ab MODIF ID bl2,
            r3 RADIOBUTTON GROUP ab MODIF ID bl3.
INITIALIZATION.
name = 'ps_parm'.
value-key = '1'. value-text = 'line 1'. APPEND value TO list.
value-key = '2'. value-text = 'line 2'. APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = name
      values = list.
LOOP AT SCREEN.
    IF ps_parm = 1.
      IF screen-name = 'r1' OR screen-name = 'r2'.
        screen-invisible = 0.
      ELSEIF screen-name = 'r3'.
        screen-invisible = 1.
      ENDIF.
      MODIFY SCREEN.
    ELSEIF ps_parm = 2.
      IF screen-name = 'r1' OR screen-name = 'r2'.
        screen-invisible = 1.
      ELSEIF screen-name = 'r3'.
        screen-invisible = 0.
      ENDIF.
      MODIFY SCREEN.
    ELSEIF ps_parm = space.
      r1 = 'X'.
      CLEAR: r2,r3.
      IF screen-name = 'r1' OR screen-name = 'r2' OR
         screen-name = r3.
        screen-invisible = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'abc'.
ENDIF.
START-OF-SELECTION.
WRITE: / 'Parameter:', ps_parm.

Hi,
two things you have to do is ,
1.Loot at acreen should be inside At-Selection screen output event.
2.The values inside quotes should be in uppercase for screen-name. Ex. Screen-name = 'R1'.
3. Clear the radiobutton values before Loop at screen to avoid dump when line 1 is selected .
INITIALIZATION.
name = 'ps_parm'.
value-key = '1'. value-text = 'line 1'. APPEND value TO list.
value-key = '2'. value-text = 'line 2'. APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
At SELECTION-SCREEN OUTPUT.
clear :r1,r2,r3.
LOOP AT SCREEN.
IF ps_parm = 1.
IF screen-name = 'R1' OR screen-name = 'R2'.
screen-invisible = 0.
ELSEIF screen-name = 'R3'.
screen-invisible = 1.
ENDIF.
MODIFY SCREEN.
ELSEIF ps_parm = 2.
IF screen-name = 'R1' OR screen-name = 'R2'.
screen-invisible = 1.
ELSEIF screen-name = 'R3'.
screen-invisible = 0.
ENDIF.
MODIFY SCREEN.
ELSEIF ps_parm = space.
r1 = 'X'.
CLEAR: r2,r3.
IF screen-name = 'R1' OR screen-name = 'R2' OR
screen-name = 'R3'.
screen-invisible = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'abc'.
ENDIF.
START-OF-SELECTION.
WRITE: / 'Parameter:', ps_parm.
Regards,
Hema.

I see solution for netflix (mac) where you need to switch to 'open in 32 bit mode', but when I go into info for FF, that radio button is not there. ??

i am confused

"You may need to open the Firefox Tools menu, then go the Add-ons manager Plugins panel and enable the Silverlight plugin. "
that did it, many thanks

Action Buttons are not getting displayed in UWL

Hi Experts,
I am facing some issues in UWL action buttons and I need your help in resolving this.
When a request is generated in ECC systems, a notification is generated in ECC as well as portal.
In ECC, we can see two buttons in the notification, "Complete" and "Cancel work item in Inbox".
But in portal, these two buttons are not visible in the notifications.
Please let me know how to bring these action buttons in UWL portal.
Thanks a lot,

First of all, please see SAP Note 1133821 - UWL Destination Service Configuration and create the RFC destination as explained in the note.
The procedure is also explained in the wiki:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=102793389
Thanks,
Shanti

PPT action buttons are not present in pdf file upon conversion

Hi
Am using Office 2003 (SP3) and Acrobat 8 (version 8.1.6).
Have been using action buttons in the presentations for several years, works fine.
When converting existing files, action buttons in both PPT show and pdf file just works, no problems.
Newly generated presentations work fine as PPT show. But when converted to pdf file, the action buttons are simply missing.
Have verified that all action buttons are "at front", same result.
Have tried to avoid corporate templates by creating a blank presentation and building a small and simple navigating presentation. Again, works fine as PPT show. And again, upon conversion there are no action buttons present in the pdf file.Corporate changes thereby should be ruled out.
Have checked all settings (including "Adobe PDF, Change Conversion Settings") between a working and a non-working PPT file, can't identify any differences.
A colleague helped out (using Acrobat 6), same result. But upon activation of "Adobe PDF, Change Conversion Settings, Restore Defaults", the action buttons worked for him. Tried it with Adobe 8, no such luck.
Have trialed the "Prep 4 PDF" tool, then the PDF file is complete and the "go to slide" keys appear and work again.
All new updates available are installed, anyone experienced the same and found a fix for this trouble?

Have tried both ways, same result.
When working with new presentations, the pdf file is viewable, but the action buttons are not present.
When working with past presentations, the action buttons are present and do work as expected.

HT1430 iPhone 4s keypad the "o" and return button are not working - solutions?

iPhone 4s keypad, the "o" and the return button are not working. Upgraded the software, now the "o" works in the verticle position only, and the return works in the horizontal position only. Help!

Hi, VRS77.
Thank you for visiting Apple Support Communities.
I would start with closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close. Test the results after processing these steps.
iOS: Force an app to close
If the issue persists, here are a couple addition troubleshooting steps I could recommend.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Hope that helps,
Jason H.

HT4623 wifi connecting buttons are not working

my i phone 4s not getting connected to wifi or even wifi buttons are not working.

What do you mean they are not working?
Does the device detect Wi-Fi networks?
Is there an error when trying to connect?

My iphones buttons are not working and it shows a black screen whith apple logo on it what should i do now?

my iphones buttons are not working and it shows a black screen whith apple logo on it what should i do now?
and i have to post sth importent on instagram tonight so its ergent please help....

Greetings motahare,
After reviewing your post, I have located an article that can help with iOS device issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

HT201401 my iphone's sleep wake and home buttons are not woking

my iphone's sleep wake and home buttons are not working

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get into Word?

I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get them imported into Word?

Hi,
I checked your account,your Export PDF subscription is in 'Pending' status.
Once it gets confirmed you will be able to use it.
Please let us know if you require further assistance.
Regards,
Florence

Once I add my .swf to Dreamweaver, the buttons are not clickable, how can I fix this?

Hello there,
I'd just like to start out by saying that this is the first time I have posted on these forums, so if I have done anything wrong, I apologize!
Anyway, about my question, just like the title says, once I import the .swf into Dreamweaver the buttons are not clickable, however when tested outside of Dreamweaver, they work correctly.
Basically I have an animated banner with some audio and two buttons, the buttons mute and unmute the music.
The file consists of two layers, one of which has 2 keyframes, the first keyframe has the Audio with the settings; "Effect: None. Sync: Start, Loop" and a button leading to the next frame.
The next keyframe (still on layer one) has much of the same but the Audio settings are different; "Effect: None. Sync: Stop, repeat x 1" and this will stop the music.
Now on the other layer (Rocket) I have a movie clip of a space-themed background and a rocket flying across it, the movie clip is made up of a motion tween and another movie clip which is the rocket.
I am using Flash CS6 and Dreamweaver CS6 on a Windows 7 computer. I am also using Actionscript 2.0
I apologize for the amount of information and I'm not very briliant at explaining things, so here are some images of the flash file, hopefully they'll help;
Layer setup - http://i.imgur.com/iZHwfAw.jpg
The movie clip - http://i.imgur.com/ayvPJUZ.jpg
Keyframe one sound settings - http://i.imgur.com/LWbnQhO.jpg
Keyframe two sound settings - http://i.imgur.com/7kS9dO2.jpg
Actionscript for the first button/first keyframe - http://i.imgur.com/x6ROqPv.jpg - (The second button/keyframe has the same code, but obviously the instance name and frame number has been changed)
Again, I apologise if this all seems confusing!
Thanks in advance for any answers to this question
Adam.

If you did not create this swf yourself then you won't be able to do what I am suggesting. If you did, then open the fla in Flash and go into the Publish Settings and select the option to publish an html file as an output. That will create an html page that embeds the Flash file. Test that file in your browser and see if it plays properly. IF so, then copy that code in place of whatever Dreamweaver did to embed the Flash.
Dreamweaver is not a reliable tool for embedding Flash content... why it does not do it the same way Flash does it is anyone's guess.

HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active. How do I fix that?

When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not. I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

File Upload Action Button are not working

Hi ,
In the File Upload Process when the processor are open change request there are Action Buttons Approve/Reject ,
When the CR Processor are Click on either Approve or Reject these two Action Button are not working (means its not show any activity) , while rest of all action button like save,close check , Run validation are working ...
While Processor has authorization to Approve/Reject that CR ...

Hello Nikhilesh
These buttons are dependent upon the workflow steps. Check that. Check the linkage for workflow. Check SWI6 - CR number and the step. Based on the step you can identify whether the proper step is assigned or not.
Thanks
Kiran

With IE UIX buttons are not displayed correctly

Hello there,
We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
Thanks,

Hi Andy,
sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
it happens with random buttons...
i haven't seen this problem in mozilla. its quite frequent in IE.
our customer is very annoyed by this problem :(

Buttons are not displayed for the first time when drawImage method is used

Hi
In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
Please help me!
Thank You

Hi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You.

Exporting build - destination devices radio buttons are not there

Similar Messages

Maybe you are looking for