Exporting charts (chart and data behind it)
Hi there,
Im new to Flex and Air but I have come here because Im looking into a way to export a chart from an application we have to excel. At the moment we are able to export the data behind the chart but not the chart itself.
I have come to two ways of doing this:
a) keep the existing export options and then use a VBA macro lib to create charts or (and this is where you come in)
b) export a excel 2007 xmlx file.
if you are not familiar with this its a new format of excel that is defined by XML script that are in a variaty of folders that are then zipped.
My idea is to have a standard 'template' that Flex (Air?) can ammend the chart.xml in the xmlx and the sheet1.xmlx and the zip and rename the file.
So what i need to figure out is if and how to get Flex (Air?) to export a zip file
any help would be great!
Thanks
Michael
There are various ways to export the chart as an image.
Similar Messages
-
Report Designer - Chart and data
Hi,
I have a query section. In one of the cell, I have a chart. I have the data in other columns on the side of the chart. When I execute the report designer, I get the chart and the then the data below on the side. When I create a pdf, the data moves up to the side of the chart. I want the web view look like the pdf view where the data is on the side of the chart. Is it possible? Why is the web view and the pdf view different?
Best regards,
JaiMoved to BOE Admin forum
-
How to export message body and data from Table to Excel from outlook 2010
I usually get Employee announcement in emails and I need to compile excel sheet from all these emails to know change in status of employee from previous line to current line .
Dear Concerned,
The change in status of the following employee has been carried out as per following details:
New Status
Change in Job
Effective Date
01-Feb-2015
Employee Name
Ricky ponting
Employee Code
4982
Designation
Sourcing Executive (Secondment)
Job Group
1A
Department
Sourcing & Supply Chain
Unit
Technology Sourcing
Division
Finance
Location
sydney
Reporting Line
Mr Micheal king
Note: Ricky Ponting was previously working as
Tariff Implementation Support Officer XYZ organization was reporting to
Mr Robin Sing
I need working code that export about HTML table data as well last Note : full line so that I can have an excel file of 2000 Employees whoes status have been changed and I can easily sort out from which previous line they were reporting to new line and I
can get in touch with the new line for any Access rights re-authorization exercise on later stage .
Currently i am using following code thats working fine with the table extraction but NOTE: line is not being fetched with the following code based on following URL
https://techniclee.wordpress.com/2011/10/29/exporting-outlook-messages-to-excel/
Const MACRO_NAME = "Export Messages to Excel (Rev Sajjad)"
Private Sub ExportMessagesToExcel()
Dim olkFld As Outlook.MAPIFolder, _
olkMsg As Outlook.MailItem, _
excApp As Object, _
excWkb As Object, _
excWks As Object, _
arrCel As Variant, _
varCel As Variant, _
lngRow As Long, _
intPtr As Integer, _
intVer As Integer
Set olkFld = Session.PickFolder
If TypeName(olkFld) = "Nothing" Then
MsgBox "You did not select a folder. Operation cancelled.", vbCritical + vbOKOnly, MACRO_NAME
Else
intVer = GetOutlookVersion()
Set excApp = CreateObject("Excel.Application")
Set excWkb = excApp.Workbooks.Add
Set excWks = excWkb.Worksheets(1)
excApp.Visible = True
With excWks
.Cells(1, 1) = "Subject"
.Cells(1, 2) = "Received"
.Cells(1, 3) = "Sender"
.Cells(1, 4) = "New Status"
.Cells(1, 5) = "Effective Date"
.Cells(1, 6) = "Employee Name"
.Cells(1, 7) = "Employee Code"
.Cells(1, 8) = "Designation"
.Cells(1, 9) = "Job Group"
.Cells(1, 10) = "Department"
.Cells(1, 11) = "Unit"
.Cells(1, 12) = "Division"
.Cells(1, 13) = "Location"
.Cells(1, 14) = "Reporting Line"
.Cells(1, 15) = "Note:"
End With
lngRow = 2
For Each olkMsg In olkFld.Items
excWks.Cells(lngRow, 1) = olkMsg.Subject
excWks.Cells(lngRow, 2) = olkMsg.ReceivedTime
excWks.Cells(lngRow, 3) = GetSMTPAddress(olkMsg, intVer)
For intPtr = LBound(arrCel) To UBound(arrCel)
Select Case Trim(arrCel(intPtr))
Case "New Status"
excWks.Cells(lngRow, 4) = arrCel(intPtr + 1)
Case "Effective Date"
excWks.Cells(lngRow, 5) = arrCel(intPtr + 1)
Case "Employee Name"
excWks.Cells(lngRow, 6) = arrCel(intPtr + 1)
Case "Employee Code"
excWks.Cells(lngRow, 7) = arrCel(intPtr + 1)
Case "Designation"
excWks.Cells(lngRow, 8) = arrCel(intPtr + 1)
Case "Job Group"
excWks.Cells(lngRow, 9) = arrCel(intPtr + 1)
Case "Department"
excWks.Cells(lngRow, 10) = arrCel(intPtr + 1)
Case "Unit"
excWks.Cells(lngRow, 11) = arrCel(intPtr + 1)
Case "Division"
excWks.Cells(lngRow, 12) = arrCel(intPtr + 1)
Case "Location"
excWks.Cells(lngRow, 13) = arrCel(intPtr + 1)
Case "Reporting Line"
excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
Case "Note:"
excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
End Select
Next
lngRow = lngRow + 1
Next
excWks.Columns("A:W").AutoFit
excApp.Visible = True
Set excWks = Nothing
Set excWkb = Nothing
Set excApp = Nothing
End If
Set olkFld = Nothing
End Sub
Private Function GetSMTPAddress(Item As Outlook.MailItem, intOutlookVersion As Integer) As String
Dim olkSnd As Outlook.AddressEntry, olkEnt As Object
On Error Resume Next
Select Case intOutlookVersion
Case Is < 14
If Item.SenderEmailType = "EX" Then
GetSMTPAddress = SMTP2007(Item)
Else
GetSMTPAddress = Item.SenderEmailAddress
End If
Case Else
Set olkSnd = Item.Sender
If olkSnd.AddressEntryUserType = olExchangeUserAddressEntry Then
Set olkEnt = olkSnd.GetExchangeUser
GetSMTPAddress = olkEnt.PrimarySmtpAddress
Else
GetSMTPAddress = Item.SenderEmailAddress
End If
End Select
On Error GoTo 0
Set olkPrp = Nothing
Set olkSnd = Nothing
Set olkEnt = Nothing
End Function
Function GetOutlookVersion() As Integer
Dim arrVer As Variant
arrVer = Split(Outlook.Version, ".")
GetOutlookVersion = arrVer(0)
End Function
Function SMTP2007(olkMsg As Outlook.MailItem) As String
Dim olkPA As Outlook.PropertyAccessor
On Error Resume Next
Set olkPA = olkMsg.PropertyAccessor
SMTP2007 = olkPA.GetProperty("http://schemas.microsoft.com/mapi/proptag/0x5D01001E")
On Error GoTo 0
Set olkPA = Nothing
End Function
Sub DebugLabels()
Dim olkMsg As Outlook.MailItem, objFSO As Object, objFil As Object, strBuf As String, strPth As String, arrCel As Variant, intPtr As Integer
strPth = Environ("USERPROFILE") & "\Documents\Debugging.txt"
Set olkMsg = Application.ActiveExplorer.Selection(1)
arrCel = Split(GetCells(olkMsg.HTMLBody), Chr(255))
For intPtr = LBound(arrCel) To UBound(arrCel)
strBuf = strBuf & StrZero(intPtr, 2) & vbTab & "*" & arrCel(intPtr) & "*" & vbCrLf
Next
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFil = objFSO.CreateTextFile(strPth)
objFil.Write strBuf
objFil.Close
Set olkMsg = Application.CreateItem(olMailItem)
With olkMsg
.Recipients.Add "[email protected]"
.Subject = "Debugging Info"
.BodyFormat = olFormatPlain
.Body = "The debugging info for the selected message is attached. Please click Send to send this message to David."
.Attachments.Add strPth
.Display
End With
Set olkMsg = Nothing
Set objFSO = Nothing
Set objFil = Nothing
End Sub
Function StrZero(varNumber, intLength)
Dim intItemLength
If IsNumeric(varNumber) Then
intItemLength = Len(CStr(Int(varNumber)))
If intItemLength < intLength Then
StrZero = String(intLength - intItemLength, "0") & varNumber
Else
StrZero = varNumber
End If
Else
StrZero = varNumber
End If
End FunctionDear Graham
I am already big fan of yours and using mail to many Addin from years from word 2007 to Word 2010 :) and still loving it and I use it for access re-authorization from Lines for application accesses . I tried and finally got understanding of the Extract to
mail Addin and after tweaking excel - Text To columns and other few things finally i was able to get the required data - from morning to now :) I am happy to see your provided guidance
Thanks alot - by the way why your Mail to many add-in is so slow now these days :) previous versions usually help me send 1000 emails in 10 minutes now it takes long time :) -
SSAS2008 r2 and Excel Line Chart and Date Axis
Hi
Excel 2010. SSAS 2008 R2
I have a excel line chart made out from SSAS pivot table with a date dimension (date) and No of licences.
Currently, it displays 1/Jun/2014 to 30/Jun/2015 (FY2015) and this looks really ugly.
While keeping the details, I'd like to display by Month-Year.
However, while I can do this with other normal excel data, I just can not do it with SSAS Pivot table.
Under Axis options, I ticked 'Date axis' but it won't bring up date options.
I think I tried everything but just can not figure it out. I wonder if it is even possible.
Th date dimension is recognised as date because I can apply date filter. I want to make it neat. Can anyone help me with this please?
It must be 'Date' Level.
Kind regardsHi SQLMa,
Could you please elaborate more detail regarding the "Date" dimension structure? In order to display the date format with Month-Year, we should build a hierarchy to organize the granularity of date dimension at SSAS level. Please
refer to the documents below:
Create a Date type Dimension:
http://msdn.microsoft.com/en-us/library/ms174884.aspx
Modifying the Date Dimension:
http://msdn.microsoft.com/en-us/library/ms166578.aspx
Regards,
Elvis Long
TechNet Community Support -
Numbers - Query about charts and dates
I have a simply spreadsheet with 2 columns showing dates and electricity readings.
Ive added a chart so I can see the electricity usage over time, but its showing each date eqidistant rather than showing them on a timeline.
Can anyone tell me what Im doing wrong?Looks like Numbers cannot plot date data. Please provide Numbers Feedback to Apple.
Regards, -
Importing PowerPoint charts and data entry
Hi
I am relatively new to captivate 5.5 and need to find out how to bring a PowerPoint web chart(similar to a pie chart) into captivate with the data series entry table. I want users to do in captivate what they can do in PowerPoint to create a chart. Do I have to create a link into PowerPoint. If so, how?
JeffNo Jeff, do not think that will work.
Why not do an automatic capture (Project Recording) with Captivate while doing the actions in Powerpoint? You can choose for demonstration, training simulation (that is what you will need) or assessment training. It is even possible to have the three files at once.
Lilybiri -
Business Graphics in WebDynpro - bundle chart and data sheet
Hi experts,
I have a simple chart with stacked columns in a WD4A application.
At the bottom of the chart I'd like to display the values of each column.
I know that it works in ABAP reports (CL_CU_DATA_SHEET).
Does anybody know how to do the same in a WebDynpro?
Thanks in advance!
Frank> Hi Frank ,
> Yes It is possible in webDynpro ABAP now how
> ?
> Please see Demo Component<b>
> WDR_TEST_EVENTS</b>.In this see view starting with
> BG*(Business Graphics ) .Run them see which will fit
> best to your problem and follow it .
> Another thing you can see Business Chart
> assocaited with ALV coloumn values . Please refer to
> Package <b>SALV_WD_DEMO</b>and component
> <b>salv_wd_demo_table_toolbr</b>.In Dropdown in ALV
> you will find option like <b>Table and Graphics</b>.
> See it .It show chart but below ALV .I m not sure do
> u need something like this only ?
>
> Hope this will help you .
>
> Cheers
> Parry
> <b></b>
Hi Parry,
thank you very much for your answer!
I cheked all examples in WDR_TEST_EVENTS but couldn't find any that fits.
The class <a href="http://help.sap.com/saphelp_nw2004s/helpdata/de/70/8fa0375b5dd003e10000009b38f8cf/frameset.htm">cl_cu_data_sheet</a> does exactly what I need, but only with SAP GUI.
I still hope that it will be possible to do the same in a WebDynpro.
Best regards
Frank -
After looking at the API for JavaFX charts, it looks kind of similar to JFreeChart. Are charts based on JFreeChart code? If so, why isn't the DateAxis class included?
Hi countfloyd
countfloyd wrote:
After looking at the API for JavaFX charts, it looks kind of similar to JFreeChart. Are charts based on JFreeChart code? If so, why isn't the DateAxis class included?It isn't based on JFreeChart, any similarity is incidental as opposed to by design. As for the lack of a DateAxis, I think there is an RFE for it, it just didn't get done.
Cheers
Richard -
How to export Oracle tables and data to mySQL
Hi,
I am new to Oracle.. and would appreciate all help on the issues below.
Currently, we have Oracle8i on HP-UX, and Oracle8i on IBM-AIX. We would like to be ble to browse the information on the web, thus, a decision to use mySQL as the web database was made. In order to achieve the above, we need to perform the following:
1) Export Oracle tables to mySQL, from both the HP-UX and IBM-AIX machines.
2) Include an additional column to the tables that need to be exported from Oracle to mySQL.
3) Implement the export as a daily extraction that will run at a certain time of the day.
How may I achieve the above?
I have just installed the Oracle Enterprise Manager... will this have any help to the above???
Appreciate all help given... greatly appreciated!
Thanks and Brgds,
AliciaI'd first make sure you really need to create a separate database just for making the data available to the web. The web application you create could just as well query the existing Oracle databases. You don't necessarily have to create a separate database just to display info over the web.
Secondly, if you still want to create a separate database, I'd also question the use of mySQL. In my opinion, mySQL is not a relational database. It acts like a relational database; you can query it via SQL. But because of all the features which mySQL says it does not support yet, I don't consider it to be a true RDBMS. This may not be an issue in your case since you're using it just for read access. Still, I'd take a long look at the list of feature mySQL does not support and make sure you can live with those limitations.
Also, if you create a separate database for the web app and use Oracle for that database instead of mySQL, you could use Oracle's built in data replication to automatically refresh the web db from the existing db
If you conclude that you still want to create a separate database for the web app and use mySQL I think you'll have to write some code to support the interface between the dbs (but hey, I'm a developer). The reason I say this is because it sounds like you're merging data from two databases into one and you may even be merging data from two separate databases into a single table of the new web database. If this is the case, simple data extract utilities will not be sufficient. Also, it sounds like the new column added to the web database may not be able to be populated from existing data. And then there's the question of what you need to do with the existing web data each time you run the data extraction ? The easiest case is that you'll always add data to the web db from existing db. If you have to purge the web db first and then refresh it with existing data then there's another step in the process. Overall, writing code to support an interface like this gives you complete control over the process and provides a lot of flexibility in how it is run. In my experience, there are usually new requirements added to the interface as time goes on. The code based approach can deal with changing requirements. The tools approach eventually falls short.
One other issue to keep in mind is how to protect your existing database while exposing your web database to the Net. Since you need to support an automated interface between the two systems, you'll need to provide a path between the two databases without letting Net users gain access to your internal database. Some serious network security issues to resolve here, but I'm not a network admin.
hth,
Frank
Hi,
I am new to Oracle.. and would appreciate all help on the issues below.
Currently, we have Oracle8i on HP-UX, and Oracle8i on IBM-AIX. We would like to be ble to browse the information on the web, thus, a decision to use mySQL as the web database was made. In order to achieve the above, we need to perform the following:
1) Export Oracle tables to mySQL, from both the HP-UX and IBM-AIX machines.
2) Include an additional column to the tables that need to be exported from Oracle to mySQL.
3) Implement the export as a daily extraction that will run at a certain time of the day.
How may I achieve the above?
I have just installed the Oracle Enterprise Manager... will this have any help to the above???
Appreciate all help given... greatly appreciated!
Thanks and Brgds,
Alicia -
BUG: Export DDL and Data fails for mixed case table/column names
Hi there,
I have found a bug in SQL Developer. See details below.
Description:
When "Export DDL and Data) function is used on a table/columns not named in UPPERCASE, sql generated by SQL Developer is invalid.
Steps to reproduce:
- open SQL Developer, connect to DB
- make a table named "lowerCase" (in double quotes, so it won't be automatically changed to capital letters)
- you may also add some columns, for example "lowerCol1", "UpCol2", ALLUPCOL3
- add some data rows to the table
- choose Tools -> Export DDL and Data
- check exporting of tables and data, on "filter" tabs choose your "lowerCase" table
- press "Apply"
Error:
Generated SQL contains invalid INSERTs: mixed-case table and columns are referenced without obligatory double quotes, which yields an error when generated script is executed (see below, relevant line is underlined)
-- DDL for Table lowerCase
CREATE TABLE "DBO_HT"."lowerCase"
( "lowerCol1" VARCHAR2(100),
"UpCol2" VARCHAR2(100),
"ALLUPCOL3" VARCHAR2(100)
-- DATA FOR TABLE lowerCase
-- FILTER = none used
-- INSERTING into lowerCase
Insert into lowerCase (lowerCol1,UpCol2,ALLUPCOL3) values ('lc','uc','auc');
-- END DATA FOR TABLE lowerCase
Remarks
SQL Developer: version 1.2.1, build MAIN-32.13
Oracle DBs: 9.2 & Express
OS: Windows 2000 Professional
If you need any more details/testing, let me know. I'd really appreciate a quick patch for this issue...
Alternatively, do you know of any other simple way of copying a single database (it's called a schema in Oracle, right?) from one computer to another? Possibly something so simple like detaching->copying->reattaching mdf (data) files in SQL Server... I thought that this "Export DDL&Data" function will do, but as you can see I couldn't use it.
I just need a simple solution that works - one operation on source to stuff, get the resulting files to other computer and one operation to have it running there... I think that such scenario is very basic, yet I just can't achieve it and I am simply not allowed to spend more time on it (read: our test project fails, my company rejects my "lobbying" and stays with MSSQL :/ )
Thanks a lot & byeThanks for your reply.
ad. 1)
You're right. I just wanted to give some very short feedback on my experiences with SQL Developer, so I didn't think starting new threads would be necessary, but as I was writing it became much bigger than I initially planned - sorry about that. I will make proper threads as soon as possible. Having "Edit post" button on this forum would also be useful.
ad. 2)
Generally, you're right - in most cases it's true that "switching DBMS is a major commitment" and "you will produce terrible code" if you don't learn the new one.
However, I think that you miss one part of market here - the market that I think Express is also targeted on. I'd call it a "fire&forget databases" market; MySQL comes to mind as possibly most common solution here. It's the rather small systems, possibly web-accessed, whose data-throughput requirements are rather modest; the point is to store data at all, and not necesarily in fastest way, because given the amount of data that is used, even on low-end hardware it will work well enough. What's important here is its general ease of use - how easy is to set up such system, connect and access data, develop a software using it, how much maintenance is needed, how easy this maintenance is, how easy are the most common development tasks as creating a DB, moving a DB from test to production server etc. There, "how easy" directly translates to "how much time we need to set it up", which translates to "how much will the development will cost".
Considering the current technology, switching the DBMS in such systems is not necesarily a major commitment and believe me that you will not produce terrible code. In many cases it's as simple as changing a switch in your ORM toolkit: hibernate.dialect = Hibernate.Dialect.OracleDialect vs MySQLDialect vs MsSql2005Dialect
Therefore, in some part of market it's easy to switch DBMS, even on project-by-project basis. The reason to switch will appear when other DBMS makes life easier => development faster. From that point of view, I can understand my colleagues giving me an embarassing look and saying "come on, I won't read all these docs just to have db copied to test server". And it doesn't mean "they are not willing to learn anything new", it's just that they feel such basic task should have self-explaining solution that doesn't require mastering any special knowledge. And if they get such simple solutions somewhere else, it costs them nothing to change the hibernate dialect.
I think Oracle did the great job with introducing the Express to this "fire&forget" market. The installation is a snap, it just works out of the box, nothing serious to configure, opposite to what I remember from installing and working on Oracle 9 a few years ago. In some places it's still "you need to start SQL*Plus and enter this script", but it's definitely less than before. I also find the SQL Developer a great tool, it can do most of what we need to do with the DB, it's also much better and pleasant to use over Oracle 9 tools. Still, a few basic things still require too much hassle, and I'd say taking your schema to another machine is one of them. So I think that, if you do it well, the "schema copy wizard" you mentioned might be very helpful. If I was to give any general advice for Express line of DB/tools, I'd say "make things simple" - make it "a DB you can't see".
That's, IMHO, the way to attract more Express users. -
Comman to take user level backup(tables and data in table for a particular)
Hi ,
I need to create a sql script to take user level back up i.e i need to take back up ,(export the tables and data in those tables in particular user) to my pc..
i am able to do the same from unix command ,but not able to do the samq in sql script
Please advice.Hi ,
I need to create a sql script to take user level back up i.e i need to export the tables and data in those tables in particular user to my pc..
i am able to do the same from unix command ,but not able to do the samq in sql script
Please advice -
Startup screen shows ghost time and date
My iPhone 3Gs recently started showing a shadow time and date behind the actual time and date on the startup (unlock) screen. The narrow bar at the top also shows shadow settings that aren't the actual ones I'm using. I have downloaded the latest operating system, removed the sim card, and reset the settings but the shadows still remain. When I unlock the screen the shadow goes away. This started when I took the iPhone to Europe. Is there any way to get rid of these shadows?
You may have taken a screenshot of the locked screen and assigned that to your wallpaper. Try changing your wallpaper.
-
Chart report Condition fields and Data fields
Hi all,
i have tried chart report by adding two condion fields and one data field, the report is more meaning full in this scenario. the first condition field is taken as x-axis, the 2nd condition fields is taken as legend.
while adding more condition fields and data fields, i feel its not showing meaningfull data.
can anyone explain how the condition fields and data fileds are manipulated by crystal report.
i am using CR XI R2 Server.
Thanks
Padmanaban Vi am using Crystal Report XI R2 RAS Embedded in my server.
as we can add any number condition fields programatically using the method
ConditionField.Add(FieldObj), i would like to know how these fields are manipulated internally by the RAS server.
that means, what is the significance of condition fieldobject 1, condition fieldobject 2,condition fieldobject 3 etc...
if i add more than two condition fields , RAS Chart Report always returns 0 as legend value for all legends.
Thanks in advance
Regards,
Padmanaban V
Edited by: Padmanaban Viswanathan on Dec 22, 2008 9:53 AM -
SSRS Bar Chart grouping date series into Months, setting scaler start and end ranges
I've been trying to solve this issue for a few days now without writing a sql script to create a "blank" for all of missing data points so that I get a bar for each month. I have date series (by day) data points grouped by two items
that creates a set of bar charts. EG: one chart per product in the tablix detail grouped to site level.
My issue is I would like the start and end of the charts to be the same for all charts and the only way I get it to work is with a chart that continues to show each date on the chart.
EG:
I have the graph start and end points set and scaling by month as I would like but each bar is a day instead of aggregating to a month level. My issue I hope to find a workaround for is if I go to Category Groups and define the grouping
to group with a year and month function the series is no longer treated as date data and I cannot control scaling. It works fine if all months have activity, but I can't figure out how to always have all charts start at "May 2012" in this example.
The only start and end point that I've been able to get to work once doing this are integer based, eg normal start would be 1 for each graph, but 1 doesn't equate to the same month from chart to chart.
I hope SSRS can provide the solution. I do know I can write a query that creates a ZERO value for each month/product/site but I don't want to leave the client with a query like that to support.
-cybertosisHi cybertosis,
If I understand correctly, you want to display all month category label in the X-Axis. You have configure the Scalar Axis, however, it cannot display the requirement format.
In your case, if we want the specific data format, we can configure Number property to set the corresponding Category data format. Please refer to the following steps:
Right click the X-Axis, select Horizontal Axis Properties.
Click Number in the left pane. Click Date option in the Category dialog box.
Then, select Jan 2000 option.
Please refer to the following screenshot below:
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support -
In numbers, can i hide rows of data in a chart and still have that data show up in my graph?
yes.
To hide rows (or columns), select the rows (or columns), then right click in the row (or column) tab to expose the contextual menu. Select the menu item "Hide ..."
Maybe you are looking for
-
Handling Huge Amount of data in Browser
Some information regarding large data handling in Web Browser. Browser data will be downloaded to the cache of local machine. So when the browser needs data to be downloaded in terms of MBs and GBs, how can we handle that ? requirement is as mentione
-
Hi all, I have always confusion when to use which system fields(tabix, index, tfill). í created one program first i used sy-tabix instead of sy-index.Then it doesnt work. Please clarify me with examples. that code is. FORM delimiting. DO. * assigns
-
How do I add links to my buttons?
Hi, I am new to the Flash platform, but have some Dreamweaver experience......I have designed a page with a top logo and a horizontal and a verticle menubar. I went to test it and it all works fineas far hover colors, hit etc..... Now I need to make
-
Dateinameneinschränkungen bei Verknüpfungen in Acrobat Pro 9
Welche Dateinameneinschränkungen gibt es bei Verknüpfungen zwischen mehreren PDF in Acrobat Pro 9? Wenn ich z.B. zu dieser Datei mit Namen: (2.2.3.7. PB Einarbeitung LfH-Kursleitung.pdf) eine Verknüpfung erstellen möchte, funtioniert das auf dem loka
-
A name should not start with any special characters
I need to put a condition in iF statement such that a name that is given by the user should not start with any special charecters.A dialog box should display indicating this conditon.Can u plz give sample code for this.My code is as below. //text box