SSRS Bar Chart grouping date series into Months, setting scaler start and end ranges

I've been trying to solve this issue for a few days now without writing a sql script to create a "blank" for all of missing data points so that I get a bar for each month. I have date series (by day) data points grouped by two items
that creates a set of bar charts. EG: one chart per product in the tablix detail grouped to site level.
My issue is I would like the start and end of the charts to be the same for all charts and the only way I get it to work is with a chart that continues to show each date on the chart.
EG:
I have the graph start and end points set and scaling by month as I would like but each bar is a day instead of aggregating to a month level. My issue I hope to find a workaround for is if I go to Category Groups and define the grouping
to group with a year and month function the series is no longer treated as date data and I cannot control scaling. It works fine if all months have activity, but I can't figure out how to always have all charts start at "May 2012" in this example.
The only start and end point that I've been able to get to work once doing this are integer based, eg normal start would be 1 for each graph, but 1 doesn't equate to the same month from chart to chart.
I hope SSRS can provide the solution. I do know I can write a query that creates a ZERO value for each month/product/site but I don't want to leave the client with a query like that to support.
-cybertosis

Hi cybertosis,
If I understand correctly, you want to display all month category label in the X-Axis. You have configure the Scalar Axis, however, it cannot display the requirement format.
In your case, if we want the specific data format, we can configure Number property to set the corresponding Category data format. Please refer to the following steps:
Right click the X-Axis, select Horizontal Axis Properties.
Click Number in the left pane. Click Date option in the Category dialog box.
Then, select Jan 2000 option.
Please refer to the following screenshot below:
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Similar Messages

How do you set a start and end time based on changes in data averages?

I am making a VI to collect data from a calorimeter that will detect automatically when I have triggered the combustion by recognizing a rise in the average temperature, and then will record data from that point until it the temperature rise stops or plateaus. I have worked out how to average my data, how to write it to a file, etc. but I don't know what the best way to construct my VI to automatically respond to changes in the average would be. It seems to me that there are a number of ways to do this, but I am fairly inexperienced with LABView and don't know which is best.
Does anyone have any ideas, specific advice, or general thoughts about using fluctuations in data averages to set start and stop times for a VI?

Lynn,
All great points - thank you for your thoughts. You are right, I am interested in selecting a subset of my data in which the temperature is rising, not setting start and stop times.
I realize that it is difficult to give concrete advice without more information, but I'm hoping that with some clarification on my part you might be able to give a few suggestions. The calorimeter I am working with is a microbomb calorimeter, which combusts small, dry biological samples in a pressurized, oxygen environment, and it does not have a water tank or other components on other bomb calorimeters. The data I am recording is mV signal from a thermocouple ring that the microbomb rests in. To directly answer your questions, I would say I am measuring detonations, or more specifically the electrical potential generated in the thermocouple due to the temperature increase of the stainless steel bomb. The data is fairly noisy, so I have previously been averaging every 1000 data points together in order to observe the temperature increase clearly.
The only plateau in the data that I have observed that I need to deal with is at the peak of the temperature increase, when I would like to put my second timestamp/end my data subset. There is a slight lag time due to the rate that the steel heats at, so the entire measurement can take 30-40 seconds even though the combustion occurs in seconds. What I would like to do is have my VI observe and respond to the averages that it is already making, and then by some means, like an increase/decrease beyond one or two standard deviations, for example, and then set the datapoint before the increase as Time 0. Then I would like to identify the end of the temperature increase/end of the datasubset by similar means as the increase levels off. Finally, I want to integrate the curve of the increase and display the integrated value for my users.
I would appreciate any thoughts. I don't have any raw data to share, but I do have a TDMS of the averaged data from a calibration test I did combusting benzoic acid. I'm not sure how much it will help, but I'll attach it regardless.
Thanks,
~nat
Attachments:
benz_test.zip ‏76 KB

How to set up start and end dates for validity of contract account in FICAx

Hi,
Can anyone tell me where can I set up the validitiy period for the contract account in FICA. In contract creation, I could just see the contract validity start date. I also need to know the validity end date. Please let me know the solution asap.
Points will be awarded for all the useful answers.
Thanks
Santosh

Yes, you're right, you would then need to develop a lot of user exits to prevent the re-use of the contract account after the validity date.
I'm think in a strange solution, it could work but you'll need to test it. if a contract account is marked for deletion (Field FKKVKP-LOEVM equal to 'X') no further action can be made over it, When you create you contract account you can schedule a change using as validity date (Field BUS000FLDS-VALDT ins the change contract account screen) to the end date of you contract account and set this deletion flag. then you run FPP2A to activate the schedule changes, before you get to the end date the flag is not set, when you get to the end date FPP2A will activate the flag and the contract account becomes not usefull.
If you do this, you have be careful because all the postings to the contract account won't be possible, it means that if there are payment to be made, interests to be calculated, etc... nothing will be posted.
Cheers,

How to print a monthly calendar with start and end times

Hi,
I'm trying to print my monthly calendar and the times of the appointments do not show up.
Am i missing something?

It looks like we're not alone in looking for this feature. I found 28 other posts to this forum alone asking for this functionality (dating back to August 2005).
I know Apple likes to be different and elegant with their apps, but until iCal adds this trivial feature, it's not an adequate replacement for even paper calendars.
Do the engineers in Cupertino not care how long their appointments last? Why not at least let users show the end time on appointments as an option in month view?
The most common advice in response to this post is to provide feedback here:
http://www.apple.com/feedback/ical.html
In case anyone is interested in seeing what others have said about this topic, here are the posts I found after doing a few quick searches (I'm sure there are plenty I missed):
http://discussions.apple.com/thread.jspa?messageID=1030412&#1030412
http://discussions.apple.com/thread.jspa?messageID=1030751&#1030751
http://discussions.apple.com/thread.jspa?threadID=1152286
http://discussions.apple.com/thread.jspa?messageID=1155931&#1155931
http://discussions.apple.com/thread.jspa?threadID=1362352
http://discussions.apple.com/thread.jspa?threadID=1366825
http://discussions.apple.com/thread.jspa?threadID=1381246
http://discussions.apple.com/thread.jspa?threadID=1484562
http://discussions.apple.com/thread.jspa?threadID=1514356
http://discussions.apple.com/thread.jspa?threadID=1528581
http://discussions.apple.com/thread.jspa?threadID=1682474
http://discussions.apple.com/thread.jspa?threadID=1712206
http://discussions.apple.com/thread.jspa?threadID=1724963
http://discussions.apple.com/thread.jspa?threadID=1807661
http://discussions.apple.com/thread.jspa?threadID=207083
http://discussions.apple.com/thread.jspa?threadID=2109562
http://discussions.apple.com/thread.jspa?threadID=2136612
http://discussions.apple.com/thread.jspa?messageID=2401772&#2401772
http://discussions.apple.com/watches!add.jspa?forumID=903&threadID=340438
http://discussions.apple.com/thread.jspa?threadID=340499
http://discussions.apple.com/thread.jspa?threadID=349227
http://discussions.apple.com/thread.jspa?messageID=4523541&#4523541
http://discussions.apple.com/thread.jspa?messageID=5443615&#5443615
http://discussions.apple.com/thread.jspa?messageID=6438793&#6438793
http://discussions.apple.com/thread.jspa?messageID=6561666&#6561666
http://discussions.apple.com/thread.jspa?messageID=7032709&#7032709
http://discussions.apple.com/thread.jspa?messageID=7236371&#7236371
http://discussions.apple.com/thread.jspa?messageID=8158161&#8158161
http://discussions.apple.com/thread.jspa?messageID=8691178&#8691178

How to drill date (column )into month in xcelsius

Hi,
I am fresher to Xcelsius. I need to know how to drill the date column into month, then further drilling down month to day.
I have 2 columns
Date                       Revenue
1/1/2010                 452553
2/2/2011                  97992
3/5/2011                  23526
4/3/2011                 63563
If i click " 1/1/2011" date column, i need to see the corresponding month data in seperate chart( i need to get the detailed data).
I need to know how the datas should be arranged in excel.
Thanks in Advance
Regards,
Abirami

Hi Abirami,
To filter out date, you can use calendar component in Xcelsius. This article explains how to use the calendar component in an interactive way.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b05b0244-0453-2e10-b4b3-fab707baddaf
Then with the help of an invisible combo box as explained in the article to could get just the selected month's data in bar chart.
Hope this helps.
Regards,
Anju Saseendran

Convert a scatter graph with multiple data series into individual graphs

I am trying to convert a scatter graph with multiple data series into individual graphs, with the series having the same formatting as in the graph when all series are together.
Normally, if I delete any series, the color scheme for all the other series vanishes. I can then waste more time in having to re-adjust the color and shape of the series, but this is tedious. This, I do not want. Is there an automated way to do this?
Ideally, of course, all series would appear in little subsections in the space of the former one graph, all with individual axes, but I can't have all, so I'll settle with having several individual new graphs, each with just one series, and with the original
formatting.
Thx.

How about creating a copy of the chart, and then setting all series except one to be transparent (no line, no marker)? Repeat for each series.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Problem with Bar Chart using Date Data

I am trying to make a simple horizontal bar chart as a Gantt chart. I am trying to set the min and max for the X axis but it is acting strangely. As you can see in the screenshot below, I set the min to 1/1/2000 but the chart uses 9/28/2011. Similar problem with the max setting. Am I doing something wrong here? Can anyone duplicate this? Anyone have a solution other than this workaround I am now using (which I assume will break my chart once Apple fixes this problem)?

BadUnit,
I assume Numbers, like me, is confused why you would set min/max limits that do not include the data?
I do get the same result as you when I enter the time range for the chart as 1/1/2000 thru 1/1/2004.
I even tried making a separate table for the chart:
There is definitley a problem.
When I enter, what I think are reasonable, min and max dates for the chart
min = 1/1/2013
max = 12/31/2015
The chart adjusts like this:

Stacked area chart with start and end dates

Hi,
I'm trying to create a stacked area chart from values that have a start date and an end date. I'd like the area to be drawn as a sum of the values at each x-axis date interval. So if I have data like:
Start
End
Value
2013-01-01      2015-01-01
100
2013-09-01      2014-01-01
200
2013-01-01      2016-01-01
300
What I need is to have the chart show the area y-axis at 400 from the start up to 2013-09-01 where it would rise to 600. At 2014-01-01 it would drop back down to 400 and at 2015-01-01 it would drop to 300 until the end.
Is this possible without calculating the sums for each date beforehand?

Hi Erba,
According to your description, it seems that you need add Start and End fields with the same level (without group relationship) to the x-axis in stacked area chart. As per my understanding, we couldn’t add multiple fields in one group at the same level.
So in order to work around this issue, we can modify the dataset to combine the Start and End field into one filed, then add the new filed to x-axis. For more details, please refer to the steps below:
Modify the dataset with the following query statement:
select Start as date , Value as value
from table_name
union
select [End] as date, (0-Value) as value
from table_name
Drag a Stacked Area Chart to design surface.
Insert value field to Values pane, then modify it with the expression below:
=runningvalue(Fields!vlaue.Value,sum,"DataSet_name")
Insert date field to Category Group pane.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Effective start and end dates for roles/group assignment

Hi,
Does Access Manager (in legacy or realm) mode support effective start date/end date on a role/group assignment on a user?
Thanks,
Srinivas

Hi Ankush,
I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
Thanks,
Srinivas

FM to get start and end date when given month

Hi all,
can anybody help me if there a FM to get start and end date when given month like 01 for jan.
Thanks in advance
Sahitya

Hi,
Check this Function Module
HR_JP_MONTH_BEGIN_END_DATE
here if you r giving the month u wil get the start date and the end date.
Hope this helps you.
Thanks & regards,
Y.R.Prem Kumar

Calculate Start and End date in Connect By -- When Hirerchy Changes

/* Formatted on 5/20/2013 9:53:00 AM (QP5 v5.115.810.9015) */
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Hello , Can some one Please help me or Guide me in calculating Start and End dates for the below logic
I want to calculate the Manager Hirerchy for the given Agent.
Then Below Query is working fine and its giving me the desired results
But when there is a change in the Manager Hirerchy or Manager gets Promoted
Then i need to calculate the start date and end date.
CREATE TABLE PERSON_DTL
SID                 VARCHAR2(10 BYTE),
EMP_MGRS_ID         VARCHAR2(10 BYTE),
START_EFFECTIVE_DT DATE,
END_EFFECTIVE_DT    DATE
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M100', 'M107', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M101', 'M102', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('A100', 'M100', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M100', 'M101', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M107', 'M102', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M102', 'M103', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M103', 'M104', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('A101', 'M105', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M105', 'M106', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
SELECT   CONNECT_BY_ROOT (b.sid) agent_sid,
             TRIM (
                LEADING ',' FROM    SYS_CONNECT_BY_PATH (b.sid, ',')
                                 || ','
                                 || b.emp_mgrs_id
                PATH,
             START_EFFECTIVE_DT Start_dt,
             END_EFFECTIVE_DT End_dt
      FROM   PERSON_DTL b
     WHERE   CONNECT_BY_ISLEAF = 1
START WITH   sid IN ('A101', 'A100')
CONNECT BY   PRIOR b.emp_mgrs_id = b.sid
This is the results that i am getting now.
AGENT_SID    PATH                       START_DT    END_DT
A100    A100,M100,M101,M102,M103,M104    1/1/2010    12/31/9999
A100    A100,M100,M107,M102,M103,M104    1/1/2010    12/31/9999
A101    A101,M105,M106                   1/1/2010    12/31/9999
Results Required
A100    A100,M100,M101,M102,M103,M104    1/1/2010    5/18/2013
A100    A100,M100,M107,M102,M103,M104    5/20/2013   12/31/9999
A101    A101,M105,M106                   1/1/2010    12/31/9999

May be this..
SQL> select agent_sid,max(path) path,max(start_dt) start_dt,
2         min(end_dt) end_dt
3 from
4 (
5    select agent_sid,path,start_dt,end_dt,
6           sum(flg) over(order by rn) sm
7    from
8    (
9      select agent_sid,
10             path,
11             start_dt,
12             end_dt,rn,
13             case when path like lag(path) over(order by rn)||'%' then 0 else 1 end flg
14      from
15      (
16        SELECT   CONNECT_BY_ROOT (b.sid) agent_sid,
17                 TRIM (
18                    LEADING ',' FROM    SYS_CONNECT_BY_PATH (b.sid, ',')
19                                     || ','
20                                     || b.emp_mgrs_id
21                 )
22                  PATH,
23                 START_EFFECTIVE_DT Start_dt,
24                 END_EFFECTIVE_DT End_dt,rownum rn
25        FROM   PERSON_DTL b
26        START WITH   sid IN ('A101', 'A100')
27        CONNECT BY   PRIOR b.emp_mgrs_id = b.sid
28      )
29    )
30 )
31 group by agent_sid,sm
32 order by agent_sid;
AGENT_SID PATH                                     START_DT END_DT
A100       A100,M100,M101,M102,M103,M104            01-JAN-10 18-MAY-13
A100       A100,M100,M107,M102,M103,M104            20-MAY-13 31-DEC-99
A101       A101,M105,M106                           01-JAN-10 31-DEC-99Edited by: jeneesh on May 20, 2013 7:54 PM
Not thoroughly tested.And not sure whether an easy way exists..

Schedule type LineChart with clients and unavailable start and end dates

I have been working on trying to get something in flex which will display a list of clients and their unavailability start and end dates.   I have attempted the line chart and the HLOC chart but have not seen success. I do have the H or V grids working fine. But getting the data to display in a line graph based upon start date and end date has been my challenge. any suggestions
Current Code:
    <s:Label x="0" y="5" text="Min Date" height="24" fontFamily="Times New Roman" verticalAlign="middle"/>
    <mx:DateField id="minDateField"
                  x="50" y="5"
                  formatString="MM-DD-YYYY"
                  selectedDate="{minDate}"
                  change="minDatefield_changeHandler(event)"/>
    <s:Label x="150" y="5" text="Max Date" height="24" fontFamily="Times New Roman" verticalAlign="middle"/>
    <mx:DateField id="maxDateField"
                  x="200" y="5"
                  formatString="MM-DD-YYYY"
                  selectedDate="{maxDate}"
                  change="maxDatefield_changeHandler(event)"/>
    <mx:LineChart id="nonAvailsLC" x="0" y="40"
                  showDataTips="true"
                  dataProvider="{getNonAvailsResult.lastResult}"
                  creationComplete="nonAvailsLC_creationCompleteHandler(event)"
                  width="890" height="550">
        <mx:backgroundElements>
            <mx:GridLines gridDirection="both"/>
        </mx:backgroundElements>
        <mx:horizontalAxis>
            <mx:DateTimeAxis dataUnits="days" minimum="{minDate}" maximum="{maxDate}"
                             labelUnits="days"/>
        </mx:horizontalAxis>
        <mx:verticalAxis>
            <mx:CategoryAxis categoryField="user" labelFunction="getName"/>
        </mx:verticalAxis>
        <mx:series>
            <mx:LineSeries xField="startDate" yField="user"
                           form="horizontal"/>
        </mx:series>
    </mx:LineChart>

I guess I still have lots to learn about Flex and Renderers. I downloaded a Gantt chart with Code and they used the AdvancedDataGrid with renderers and such. I modified the code to work for me. but if I had to create it myself right now, I would be in trouble. Lots more to learn.

Hyperion Planning dynamic forms based on start and end date across years

Hi All,
I have a requirement where i need to be able to view a form showing periods across years that are dynamically built depending on the start and end dates. If i have a start date of 01/11/2009 and an end date of 31/7/2013 i want to be able to view a form that shows all of the periods (Jan,Feb etc) in a form that is driven by these dates, in addition it will need to show the actual scenario up to the current month and the forecast from the current month to the end date. So basically if a user inputs the start and end dates the form will display the relevant periods driven by these dates.
Any tips very much appreciated!

Hello,
This is difficult to realize, but you can get quite far with a workaround. The first question is, where do you want to input your selection of time periods? Assuming you have a webform with the complete timeline in months and years and you type in the start period and end period.
Webforms have the option to suppress rows and columns.
This can be extended with option of empty cells or not empty cells.
You will need to apply your creativity on this.
Put every month-year combination in a column and add the suppression.
Calculate the timeline between start period and end period with a dummy member, so data exists for these and columns will show.
Maybe you will need to copy the required timeline into a separate version for this, to avoid having periods which were outside the selection and still have data.
I hope these hints help a bit in this challenge.
Regards,
Philip Hulsebosch
www.trexco.nl

Reduce Working Days by Emp Start and End Dates

I'm banging my head trying to get this working. The set-up:
DimResources table with various employee information including a Start and End Date.
A Calendar table with FullDate, Year, Quarter....WorkingDays (1 for working and 0 for non-working) and WorkingDayNumber (working days increased by 1, weekends are not).
Page View report with page view filters for Business, Role, Month, Week, Year.
In the calculation the denominator is total working days for the period * 8. Works great. Further reduced by any submitted time off. Again, so far so good. The part I'm having trouble with is trying to further reduce total working days by
the number of days the person wasn't available in a month, defined by the person's start or end date.
The calculated field works great when only 1 person is selected. As soon as more than 1 person is selected or the slicer is cleared, an error is thrown.
Any ideas on what is wrong or better ways to accomplish what's needed?
TotalWorkingDays2CF=CALCULATE
SUM(Calendar[WorkingDays]),
FILTER(Calendar,Calendar[WorkingDays]=1),
Calendar, DATESBETWEEN(Calendar[FullDate],SUM(DimResources[Start Date]),SUM(DimResources[End Date]))
Error:
<detail>
<ErrorCode>rsErrorExecutingCommand</ErrorCode>
<Message>Query couldn't run for dataset 'Tablix41DataSet'.</Message>
<ProductName>Power View</ProductName>
<ProductVersion>11.0.2150.3</ProductVersion>
<MoreInfo>MdxScript(Model) (10, 27) Calculation error in measure 'Calendar'[TotalWorkingDays2CF]: An invalid numeric representation of a date value was encountered.</MoreInfo>
</detail>
Dennis DeRobertis

ok, but this is not a running total but just a sub-total/grand-total
so what you can do is the following:
create two measures - first calculate the workdays per ressourcen and second use SUMX() to get the sub-/grand-total if multiple employees are selected (e.g. subgroups, groups,division, etc)
WorkdaysRessource:=CALCULATE(
COUNTROWS('Date'),
FILTER('Date',
'Date'[Date] >= CALCULATE(MIN('DimResources'[Start Date]))
&& 'Date'[Date] <= CALCULATE(MIN('DimResources'[End Date])))
Workdays:=CALCULATE:=SUMX(
'DimResources',
[WorkdaysRessource]
hth,
gerhard
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com

Text Variables to show Start and End Date of Fiscal Year Period

Hi,
I am creating a query that has user enter a starting fiscal year period and posts information by Fiscal Year Period going back 14 periods. I am able to put the fiscal year period in the heading for all periods, but would also like to add the start and end calendar day for each listed period. Can that be done using a replacement path text variable or is that something more for a customer exit variable?
Thanks in advance for any thoughts provided.
Bill

Hi,
This is one of my exit that display the calmonth (offset -12). Usefull when I have to retrieve in a KF a complete rolling year depending one calmonth.
S_VMUCMN is my selection variable
S_TXTCMN_M12 is my text variable calmonth-12
S_TXTCMN_M0 is my text variable for selected calmonth.
WHEN 'S_TXTCMN_M12'.
    IF i_step = '2'.
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'S_VMUCMN'.
        CLEAR l_s_range.
        " First day of the selected month
        CONCATENATE loc_var_range-low '01' INTO l_calday.
        CALL FUNCTION 'YFRBW_FUM_CAL_DATE_IN_INTERVAL'
          EXPORTING
            date      = l_calday
            months    = 12
            signum    = '-'
          IMPORTING
            calc_date = l_calday.
        l_s_range-low = l_calday+0(6).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Thus, in KF header you have to put the two text variable to display the complete period.
Hope it helps,

SSRS Bar Chart grouping date series into Months, setting scaler start and end ranges

Similar Messages

Maybe you are looking for