Exporting different images to jpg (with different names)

Dear Scripters,
I KNOW I can script all this, but I need your help to find my way home…
I have a doc made of 15 pages, each of these contains three or four instances of the same image, in different dimensions (iPhone, iPad, Android, Web, etc.).
I prepared the pages assigning a different ScriptLabel to each instance, like:
Page 1
p1_HW
p1_HMT
p1_HNMT
p1_lightbox
Page 2
p2_HW
p2_HMT
p2_HNMT
p2_lightbox
and so on.
I'd like to export automatically each instance as a jpg, naming it by its ScriptLabel.
BTW, is it possible to filter processing of the instances depending on what's AFTER the first underscore of the ScriptLabel?
Just, if you can, give me some rough directions on what's the best way to approach the script, then I'll try to figure out myself…
g

Have a look at the JpgCropExporter:
http://www.indesignscript.de/indesign-skripte.html?&tx_abdownloads_pi1[action]=getviewdeta ilsfordownload&tx_abdownloads_…
Maybe it can be modified for your needs.
Cheers Stefan

Similar Messages

Wny does ACR 7.3 open a .JPG with different dimensions than PS 13.0.1 x64?

I have a .jpg file that opens in Photoshop 13.0.1 x64 as an image with dimensions of 5588 x 4627 pixels. If I set Photoshop to open it in ACR 7.3 it opens with dimensions 4453 x 4418 with the image looking squished horizontally and cropped at the top.
I captured the image on a Nikon D600. I developed the NEF with DxO Optics Pro 8.1.1 and output a TIFF. I opened the TIFF in Photoshop (without using ACR) and did my editing including some transformation to create mirrored wrap for a canvas. There are versions saved as PSDs. I resized the image for output and used PS to create a JPG. That JPG causes the strange (to me) behavior when Photoshop tries to open the file.
I used the same PSD to create multiple JPGs with differing levels of quality (varyiing from 9MB to 27MB). Photoshop exhibits the same behavior on all of them.
If I process the JPG thruough ACR, the resultant image retains the bad dimensions and distortions.
The Adobe "chat" preresentative said this was expected behavior in a 2+ hour chat. He/she said that they were able to replicate the different dimensions on their end with their images.
Does anyone know if this is normal behavior? If so, why?
Has anyone experienced something similar?
Thanks,
Joe
I am running this on Win7 x64 Home Premium with 8 GB RAM. I also have LR 4.3 installed on the computer and previously used it to process the same NEF file.

I sent the JPG to a service for a print on canvas. They reported that the image was not the proper size and shape when they opened it in Photoshop. Unfortunately I have not been able to get them to tell me what pixel size it was, just rough inches (!?!?!). So I started trying things in Photoshop and came up with this strange behavior that might explain the problem at the service.

In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

Hi jshira86,
You can definitely have different sets of iPads with different apps loaded. When you "supervise" your iPads, you will see that on the left side of the Configurator window there is a "+" sign in the lower left corner. Click it to create a new device group. With this new device group you can choose what apps and configuration profiles you want to install on that group of iPads. Create as many groups as you want to customize the apps and profiles you want on them.
Hope this answers your question!
~Joe

Can different music be used with different set of photos in a slide show?

Can different music be used with different set of photos in a slide show?

Yes. The basic idea is that you make a playlist of songs and choose that to use with the slideshow, rather than any particular song. In iPhoto 11 you can do this in iPhoto. In earlier versions you do this in iTunes.
There is a limitation. Each song will play the full way through, you can't croassfade from one to another and so on.
Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold.
Others, in order of price: PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Express $199
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Express is the most capable app of them all. You get what you pay for.

SAPScript: export print form and import with different name?

Hi!
I need to export print form from one system and import it with different name to other system.
For this I run RSTXSCRP but the problem is that when I spefify different name for a form while importing, it gives an error...
I tried to edit exported file before importing changing form name inside a file, but this not helped...
Any ideas?
Will reward,
Mindaugas

thanks for input, but I probably do not understand what you mean...
here is what I need:
for example: if I have ZNEWFORM in system1, then I need to export it from system1 and to import to system2 with form name ZNEWFORM_ZZ... is it possible?
thanks again,
M.

How To Show Different Artwork For CD With Same Name?

In 2002, Chris Botti released a holiday CD named December. In 2006 he also released another CD named December with the only difference being track 2 (Ave Maria) & track 7 (I Really Don't Want Much For Christmas which are not included on the 2002 release. These are not additional tracks but replace 2 songs from the original 2002 release. The album art is different for both CDs. So, how can I show these two CDs with the same name and same artist but with different artwork in Cover Flow mode? Help!
iMac G5 1.8 Ghz iMac 1.8 GHz G5 17" Mac OS X (10.4.8) 1.5 GB RAM Mac OS X (10.4.8)

If you store Album artwork the way i described using Command I (get info) - then the artwork is actually EMBEDDED in each song and is carried with that song wherever it goes.. and in this case it doesnt matter if u had 3 copies of the same album - all identical. You could even save a diff image for each tarck if u wanted.
If there is no artwork embedded, then coverflow places the image in a separate folder that is only referenced by iTunes for the whole CD.
You also might want to turn off coverlfow and continue doing what u had been doing in the past - add you won.
I also think i know what may be happening. You say they are identical except for track 2 - But problem is - I don't think iTunes can handle 2 identical CD's from the same artist.
Here's an experiment:
Goto any of the songs.... right-click and select "Show in Finder" the Finder will open and show you the song file and its location. Do you see one album once or 1 album twice?
If you see 2 of everything, i would recommend the following:
Rename the first album "December (2002)" and the second "December (2006)" then iTunes will definately separate them out.

Export as Separate PDF Pages with Unique Names

I have an InDesign document that has several pages. I want to export each page as a seperate PDF, but they have to have a unique name that I want to be able to specify.
For example, I want to export page 1 as "calendar page 2014"
Page 2 as "Diary page 2014" etc.
I found some solutions, but they aren't quite what I need:
Export as Seperate pages with image name
This apple script takes the name of the first image on the document and uses that as the name.
However, my document has no images.
Exportools
A paid tool that offers many options for exporting. However, the name has to be based on a pattern, which is no good for me.
I'm hoping that there will be a script that can take the name from a non-printing area/layer. That way, I can just put the desired name on the page and it will export with that name each time.

have you looked at the extention Autosplit PRO? This may be what you are looking for. (Although, I don't think this software is compatable with MAC...but if you find out otherwise, please advise!)
good luck..

Different number of parses with different providers

I tried to figure out
how could I control number of parsing from MS ADO app.
To my surprise it seems that there is no general way to do it.
The behaviour is heavily dependent on underlying OLEDB provider,
and for some of the providers (Oracle's own including)
I did not manage to reduce number of parses.
I wrote a simple vbs script that:
1. Opens the connection for the given provider
2. Executes ALTER SESSION SET session_cached_cursors=100
3. Creates ADO command with 'SELECT ... FROM USER_TABLES..'
     and with one parameter
4. Opens ADO recordset with this command, reads from and closes it
Here is the script:
'TestADOCommandParsing.vbs
Dim stConnectString
Dim stUID
Dim stPWD
Dim stTestTag
Dim stServer
Dim cn
Dim cmdALTER_SESSION
Dim cmdUserTables
Dim rsUserTables
Dim param
Dim nRows
Dim I
Const c_stProvider = "Ora" '"MS" '"ODBC" '
Const adVarChar = 200
Const adParamInput = 1
Const adUseServer = 2
Const adOpenStatic = 3
Const adLockReadOnly = 1
stUID = "..."
stPWD = "..."
stServer = "..."
stTestTag = "TestParsesADO_" & c_stProvider & "_1"
If c_stProvider = "MS" Then
stConnectString = "Provider=MSDAORA;" & _
"User ID=" & stUID & ";Password=" & stPWD & ";Data Source=" & stServer & ";"
ElseIf c_stProvider = "Ora" Then
'Oracle provider.
'The PLSQLRSet attribute [=1] specifies whether OraOLEDB needs to parse the PL/SQL
'stored procedures to determine if a PL/SQL stored procedure returns a rowset:
stConnectString = "Provider=OraOLEDB.Oracle;PLSQLRSet=0;" & _
"User ID=" & stUID & ";Password=" & stPWD & ";Data Source=" & stServer & ";"
ElseIf c_stProvider = "ODBC" Then
stConnectString = "Provider=MSDASQL.1;Extended Properties=" & _
"""DRIVER={Microsoft ODBC for Oracle};" & _
"UID=" & stUID & ";PWD=" & stPWD & ";SERVER=" & stServer & ";"""
End If
wscript.echo "Provider = " & c_stProvider
wscript.echo "stConnectString = " & stConnectString
     Set cn = CreateObject("ADODB.connection")
     cn.Open stConnectString
     Set cmdALTER_SESSION = CreateObject("ADODB.Command")
With cmdALTER_SESSION
.CommandType = 1 'adCmdText
.Prepared = False
.CommandText = _
"BEGIN EXECUTE IMMEDIATE 'ALTER SESSION SET session_cached_cursors=100'; END;"
Set .ActiveConnection = cn
End With
cmdALTER_SESSION.Execute
     Set cmdALTER_SESSION = Nothing
     Set cmdUserTables = CreateObject("ADODB.Command")
With cmdUserTables
Set .ActiveConnection = cn
.CommandType = 1 'adCmdText
'The Recordset parameters
'CursorLocation, CursorType, LockType
'seem to be irrelevant for reparsing of Oracle cursor.
'Oracle session_cached_cursors parameter also has no effect.
'Command.Prepared setting affects it, but only for ODBC-based provider:
'False: N parses, N executions
'True: 1 parse, N executions
.Prepared = True
.CommandText = _
"SELECT TABLE_NAME FROM USER_TABLES " & _
stTestTag & " " & _
"WHERE TABLE_NAME LIKE ? " & _
"ORDER BY TABLE_NAME"
Set param = .CreateParameter("TABLE_NAME_Pattern", adVarChar, adParamInput, 30, "%")
.Parameters.Append param
End With
     Set rsUserTables = CreateObject("ADODB.Recordset")
For I = 1 To 10
cmdUserTables.Parameters("TABLE_NAME_Pattern").Value = "QU_%"
With rsUserTables
'The Recordset parameters:
'CursorLocation, CursorType, LockType
'seem to be irrelevant for reparsing of Oracle cursor:
'.CacheSize = 100 'Irrelevant
'.CursorLocation = adUseServer 'adUseClient 'Irrelevant
'.CursorType = adOpenStatic 'adOpenForwardOnly 'Irrelevant
'.LockType = adLockReadOnly 'Irrelevant
.Open cmdUserTables
While Not .EOF
nRows = nRows + 1
.MoveNext
Wend
wscript.echo CStr(I) & ". nRows = " & CStr(nRows)
.Close
End With
Next
Before running tests:
VARIABLE SQLTextPattern VARCHAR2(100);
COLUMN HASH_VALUE FORMAT 9999999999
COLUMN SQL_TEXT FORMAT A40
COLUMN "Invalids" FORMAT 9999999
COLUMN "Parses" FORMAT 9999999
COLUMN "Execs" FORMAT 9999999
COLUMN "Parses/Execs" FORMAT 9999.99
COLUMN CH# FORMAT 999
COLUMN ROWS# FORMAT 9999
I ran TestADOCommandParsing1.vbs script 3 times with
different providers and table aliases to distinguish
SQL from different tests:
host cscript.exe TestADOCommandParsing1.vbs
After each run I changed table alias var:
EXEC :SQLTextPattern:='%TestParsesADO_Ora_1%';
or
EXEC :SQLTextPattern:='%TestParsesADO_ODBC_1%';
or
EXEC :SQLTextPattern:='%TestParsesADO_MS_1%';
and queried V$SQL, V$SYSSTAT.
Before running the tests:
SYSTEM@ADAS> SELECT NAME, VALUE
2 FROM V$SYSSTAT
3 WHERE NAME = 'session cursor cache hits'
4 ;
NAME VALUE
session cursor cache hits 91051
Test with Oracle OLEDB provider:
SELECT
          SUBSTR(SQL_TEXT,1,200) SQL_TEXT
          ,PARSE_CALLS PARSES
          ,EXECUTIONS EXECS
          ,CHILD_NUMBER CH#
          ,FIRST_LOAD_TIME
          ,ROWS_PROCESSED ROWS#
     FROM V$SQL
     WHERE SQL_TEXT NOT LIKE '%SQL_TEXT%'
          AND SQL_TEXT NOT LIKE '%SQLTextPattern%'
          AND SQL_TEXT LIKE :SQLTextPattern
     ORDER BY CH#
SQL_TEXT PARSES EXECS CH# ROWS#
SELECT TABLE_NAME FROM USER_TABLES TestP 21 0 0 0
arsesADO_Ora_1 WHERE TABLE_NAME LIKE :1
ORDER BY TABLE_NAME
SELECT TABLE_NAME FROM USER_TABLES TestP 0 10 1 230
arsesADO_Ora_1 WHERE TABLE_NAME LIKE :1
ORDER BY TABLE_NAME
SELECT NAME, VALUE FROM V$SYSSTAT...
NAME VALUE
session cursor cache hits 91062
Test with ODBC OLEDB provider:
SELECT ... FROM V$SQL ...
SQL_TEXT PARSES EXECS CH# ROWS#
SELECT TABLE_NAME FROM USER_TABLES TestP 1 0 0 0
arsesADO_ODBC_1 WHERE TABLE_NAME LIKE :V
001 ORDER BY TABLE_NAME
SELECT TABLE_NAME FROM USER_TABLES TestP 0 10 1 230
arsesADO_ODBC_1 WHERE TABLE_NAME LIKE :V
001 ORDER BY TABLE_NAME
SELECT NAME, VALUE FROM V$SYSSTAT...
NAME VALUE
session cursor cache hits 91062
Test MS OLEDB provider for Oracle:
SELECT ... FROM V$SQL ...
SQL_TEXT PARSES EXECS CH# ROWS#
SELECT TABLE_NAME FROM USER_TABLES TestP 11 0 0 0
arsesADO_MS_1 WHERE TABLE_NAME LIKE :V00
001 ORDER BY TABLE_NAME
SELECT TABLE_NAME FROM USER_TABLES TestP 0 10 1 230
arsesADO_MS_1 WHERE TABLE_NAME LIKE :V00
001 ORDER BY TABLE_NAME
SELECT NAME, VALUE FROM V$SYSSTAT...
NAME VALUE
session cursor cache hits 91062
As you see the number of parses (both soft and hard) differ from
provider to provider.
Provider Hard parses Soft parses Executions
ODBC 1 0 10
MS for Oracle 11 0 10
Oracle 11 10 10
It looks like there is no way to control this 'bad' behaviour of
OLEDB providers, at least from ADO level. I looked through the docs on
Oracle provider for 8.1.6, but found nothing.
There is a temptation to drop all this stuff in favour of SQL
incapsulated in PL/SQL procedures...
Any comments?

D.Bender wrote:
Hello,
What's very confusing is that it doesn't always return the same number of readings. Sometimes it is 5, then 7 and afterwards 6 without changing anything. Since it is the first program for the Keithleys at work nobody can help me. I already tried highlighting execution and retain wire values. This way I saw that the VISA write command should give the correct command but the VISA read does not return the right number of readings. In addition to that I don't get any readings on the second iteration, so I can only see some on the first. The Keithley also does not show any new measurements (at least it does not show any numbers, only the typical "----").
I can't view your file but I have experience with the Keithley 2400 so here is my opinion.
This is a common problem for new users working with buffers. The most likely cause is that you are reading the buffer BEFORE it is full. If you initiate the second measurement immediately, you will likely see a Keithley error caused by trying to set the buffer values while a measurement is in progress. The keithley will immediately return the buffer contents when asked to. You, as the programmer, must set up your LabVIEW code to wait for the buffer to fill, then read the values. While a fixed delay before reading could work, here is a better solution.
I posted my code for a I-V sweep (set voltage, measure current over a linear range) here http://forums.ni.com/t5/LabVIEW/Error-code-110-in-keithley-2400/m-p/2680579#M797618. (sorry I don't have access to the files right now to upload them here. The idea is first set the registers to watch for the buffer to become full. When full, the SRQ bit will be set to 1. After starting the measurement, i probe the SRQ value in a while loop. Once it's set to 1, read the buffer and reset registers. This method is outlined in the Keithley 24xx SMU manual (I can't remember which page).

AppleScript to resize images and save with new name

I want to make an apple script, which resizes all images of a folder regardless what kind of filetype.
The source folder will change every day.
With the script i want to choose a source Folder, resize all images and save the files with my jpeg options in the same folder, but with adding „_ipad“ in the filename.
I tried to edit an existing script from this forum, but in Photoshop 5.1 i get the error-message "This function is possibly not available in this Version" in line 18 "save in file newFileName as JPEG with options myOptions"
How can i save the documents with new name in the existing folder?
Thanks.
This is the script i’m working with:
set inputFolder to choose folder with prompt "Wähle einen Ordner:"
--set destinationFolder to choose folder with prompt "Wähle einen Zielordner" as string
tell application "Finder"
          set filesList to (files of entire contents of inputFolder) as alias list
end tell
tell application "Adobe Photoshop CS5.1"
          set UserPrefs to properties of settings
          set ruler units of settings to pixel units
          repeat with aFile in filesList
open aFile showing dialogs never
                    set docRef to the current document
                    tell docRef
                              set newFileName to my getBaseName(name)
--resize image height 240 resolution 72 resample method bicubic sharper
change mode to RGB
resize image resolution 72
                              set myOptions to {class:JPEG save options, embed color profile:true, quality:12, format options:progressive, scans:3}
save in file newFileName as JPEG with options myOptions
                    end tell
close the current document saving no
          end repeat
          set ruler units of settings to ruler units of UserPrefs
end tell
on getBaseName(fName)
          set baseName to fName
          repeat with idx from 1 to (length of fName)
                    if (item idx of fName = ".") then
                              set baseName to (items 1 thru (idx - 1) of fName) as string
                              exit repeat
                    end if
          end repeat
          return baseName
end getBaseName

This seems like a Photoshop error not an AppleScript one. Have you looked in the Photoshop dictionary to see if the command you are getting the error on exists and if it has those options?
If all you want to do is resize image files and save the resized image file you might want to look at Automator. Specifically the Scale Image action under Photos.
regards

Exporting need to automate 2 different image sizes to 2 different folders (as a default setting)

This has been a 'why is this not possible yet' since LR1.
Often photographers need to export as:
1000px @ 72dpi
4000px @ 300dpi
So that clients can have a screen friendly & a print version.
Sure - I can do it once and then just do it again - changing all the inputs, sizes etc, but this should be a standard dialog in the export box.
This way the photographer can have a preset at their standard sizes and just CHANGE THE FOLDERS (with option of changing the file name)
All Adobe needs to do is add a check box for export to second folder with file size options dialog....
So simple - been waiting years for this to be a standard option...

You could also use the built in hard drive publish services. Create two services, one for each location/size. Within each publish service, create a smart folder that refers to a single collection. Then dragging a photo to that one collection will queue the images for export in both services.
You'd still have to visit each of the services to click "publish."
Removing the images from the collection automatically deletes the from the hard drive on the next publish, also.
mh++

Exported JPEG have same size with different PPI.

Hello, i just noticed that changing the PPI from 240 (taken with my Canon) to 100 and exporting the photos to JPEG sized as 2MP have no change at all in size. Shouldn't 100PPI be smaller in size?

A smartphone has a certain number of pixels on its screen. If you provide an image with that exact number of pixels, then it makes not the slightest difference whether or not the image is 240 ppi or 100 ppi or some other number. The number of pixels is the important factor, not the ppi. (By the way, whatever your smartphone display is still a "digital image")

Different PO through SOCO with different delivery address

Hi,
We are facing issue with sourcing cockpit. While creating purchase
order for multiple shopping carts through Sourcing cockpit, If multiple
line item have different shipping location it is creating different
Purchase orders.
We have requirement to create one PO with same vendor for multiple line
items. For above problem we are keeping same vendor even though it
creates two seperate POs.
Kindly advise.
Thank you
Ritesh

Hi Ritesh,
Please check the answers in this thread :
PO split in sourcing cockpit ? :-(
BADI BBP_SC_TRANSFER_BE
Method GROUP_PO
Kind regards,
Yann
Message was edited by: Yann Bouillut

Different behavior of movewindow with different windows is (xp or windows 7)

we have a windows wpf stand alone application which must be integrated within a windows form 2.0 stand alone application. given to the particular implementation of the windows form application we decided to use a light integration trying to change the parent
handle of the wpf main window setting as parent the handle of a windows of the windows form 2.0 application.
in order to reposition the wpf windows on top of the parent windows form window, we have a thread which keeps doing two operations: (1) invoke getwindowsrect on the parent windows form windows to get the parent absolute position and (2) invoke movewindow
on the wpf main window handle to reposition the window.
when we move the windows form window, the wpf windows follows the parent remaining in the correct position. we tested this solution with windows xp, windows 7, windows 8 in our office. when we went to the customer to complete the installation, both on a
windows xp and on a windows 7 the behavior was different. the size of the wpf window was much bigger than the size of the windows form parent window. back in office we found the same strange behavior in windows xp wirtual machine. in order to fix the problem
(at least partially) we had to change the operation sequence within our code as follows in the monitoring thread: (0) get parent windows position with getwindowrect (1) set the parent of the wpf main window to (null) 0 invoking setparent, (2) invoke the movewindow,
(3) re set the parent handler of the wpf main window to the handler of the windows form window.
with last solution it works but clearly there are more flikering when the window is moving or resizing respect to initial implementation.
any idea about this different behavior of movewindow function? any suggestion?
thanks
Paolo

Hi Paolo,
You'll need to post it in the dedicated WPF or Windows Forms forum for more efficient responses, where you can contact the experts.
http://social.msdn.microsoft.com/Forums/en-US/home?forum=wpf WPF forum
http://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winforms Windows Forms forum
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Adobe Assets: PSD export to image(PNG, JPG) crashes webpage

Firstly it is great that Adobe Assets was released so that it would be possible to view PSD files.
Have a PSD file opened in Adobe Assets on Google Chrome(Linux). I am trying to use the option of exporting the PSD to an image format, but the Actions -> Download -> PNG/JPG crashes the webpage.
Any workaround other than using Adobe Photoshop? I guess I can ask the creator of the PSD to export it.

I set up Ubuntu 14.04.1 LTS using the iso image from here Ubuntu 14.04.1 LTS (Trusty Tahr). Using either Chrome or Firefox I am able to download both a png and jpg image of a psd file from the private file one-up page.
First steps to try are rebooting the machine, and clearing all cache / cookies from the browser.
Next thing to try is to choose Actions > Download and from the Chrome Dev Tools for the download you should see:
Request Method: GET
Status Code: 200 OK
Request URL: https://scproxy-prod.adobecc.com/api?X-Location=https%3A%2F%2Fcc-us1-prod.adobesc.com%2Fap i%2Fv1%2Fassets%2F1d9b9bbe-5868-4540-a46e-e305b9e23ee7%2Frenditions%2Fjpg%2Ffull&Authoriza tion=Bearer%20[redacted]A&download=true&filename=test.jpg

I can´t save images in .jpg with "Camera Raw" software from my Elements 6.0

I have Photoshop Elements 6.0, I bought it last year and untill now, it´s OK. Now I´m beginning working with .RAW files, but I can´t save them as .JPG after I modified them with the "camera Raw" software. I can only save pictures in .DNG. ¿Could someone please tell me how to save it as .JPG?
I consider this is a basical function wich, for example, Photoshop CS3 does.
Bye.

Thank you very much for your answers.
Daniel.
2009/6/3 Barbara Brundage <[email protected]>
The Save button in the raw converter is the DNG converter. To save in any
standard image format, you must open the image in the editor, then save it
there.
>

Exporting different images to jpg (with different names)

Similar Messages

Maybe you are looking for