Exporting from FCP HD using QT conversion

hello,
I exported a sequence shot with the DVX100A, I used quicktime conversion mpeg-2 with motion at best and an average bit rate of 5. the video looks nice, but during motions I can see lines along the border of a face, for example. anything that moves has lines long its borders. (interlaced?)
with another prject, which was a trailer for JFK in my editing class, I ripped the footage from the DVD, I know that footage's bitrate was higher, around 6.3 in FCP. after using the same export properties, I ended up getting no lines.
can anybody please explain those lines along my moving objects? it really bothers me>
thanks
PB 15' 1.25 FCPHD DVDSP Mac OS X (10.3.9)
PB 15' 1.25 FCPHD DVDSP Mac OS X (10.3.9)
PB 15' 1.25 FCPHD DVDSP Mac OS X (10.3.9)

hey thanks for replying so quickly....
the material was shot in 24p, but I captured it in 30fps with DV NTSC 48 kHz capture and sequence preset.
so far I only viewed it on my PB as a quicktime m2v file with the player. i havent watched it on a TV screen yet, still need to burn it.
I used the QT mpeg-2 converter with Two Pass VBR and set the target bitrate up 6 I believe.
However, there is only regular motion, no fast pans, tilts, or whatever.
Any more ideas? thanks
PB 15' 1.25 FCPHD DVDSP Mac OS X (10.3.9)
PB 15' 1.25 FCPHD DVDSP Mac OS X (10.3.9)

Similar Messages

Exporting from FCP and using Compressor at the same time?

Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

Only in FCP 7.

Exporting from FCP for use with PC

Hey all,
Trying to deliver a high-med quality 8 minute video from FCP for use with a PC. I've tried exporting both a .mov and .avi using DVCPro50, but neither are readable through the PC. Best I can get is sometimes audio will show up. Does anyone have a good solution for exporting from FCP for use with a PC?
Thanks again for your help!

I don't think DVCpro50 codec is available on a PC. I think panasonic has a special license with apple only, so you need to try a different codec for the avi.

Trouble exporting 320x240 from 720x480 sequence using QT conversion

(Opps, put this on the FCP Express discussion 1st...)
Hi,
Everytime I try to export a 720x480 sequence from FCP with "using QT Conversion" to a 320x240 size, it exports out as 640x480. Everytime. Used to work just fine. Same thing happens using a compressor setting to 320x240 and exporting right from the QT export size setting. Anyone know what gives? I tried trashing prefs in both FCP and QT. No luck.
Thanks!

This is the first time I've heard of this problem so no real basis to go on. Try the QT prefs delete again and if not that, then the QT reinstall.
To do a full quicktime reinstall.
Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Reboot
Good luck.
x

Problem exporting from FCP using compressor

Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
Hope this helps anyone else in similar situations
Martin
G5 PPC Mac OS X (10.4.8) FCP 512 post production

Hi:
How long is your movie?
The best workflow is FCP > Compressor > DVDSP.
You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
To give you detailed info about what encoding settings to use you must post some info about your FCP project.
Hope that helps !
Alberto

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

What should I use to export from FCP to DVDSP?

I'm sorry if this question is too basic, but I've searched past discussions and read the manual, and can't seem to find the answer. I am trying to put a nearly hour-long movie I made onto a DVD, in order to have hundreds of duplicates made. I'm using DVD SP, and I had been exporting my movie from FCP to a Quicktime movie file, then importing the Quicktime file into DVD SP. Then recently I came across something online that said you should actually be exporting from FCP to Compressor, then to DVD SP. I've never used Compressor before, so I have no idea what to do, or if I even should be doing it. The video was fine when I exported to Quicktime, but I of course want to have the best video quality possible.. so if there's a way to keep the video at the highest quality possible (higher than when using Quicktime), please let me know (and if it could be explained as simple as possible, I would appreciate that).

Hi Ryan,
I'm relatively new to this too but you're on the right track. I would export to Compressor.
There are various settings i.e. mpeg2 fast encode, high quality 60min, 120min, widescreen, 4:3 etc and all dependant upon what you want your end result to be.
You'll need to choose your format - I suggest mpeg2 - 60min High Quality Encode > your destination for both the video and audio > 'submit'.
You should end up with a file that resembles *My Movie.m2v*
Then import that file into DVDSP into the assets pane and you're away.
Good luck!
-Chuck

Exporting from FCP to DVD

Hey
Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
My project is no longer than 5 mins
1920 x 1080 - 1080i (16:9)
Field Dominance: None
frame rate 25
I have Final Cut Studio latest version.
I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
Any advise on what you think will be best would be great.
Thanks

Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
Message was edited by: Dynamicworm
Message was edited by: Dynamicworm

Exporting from FCP to .mov - backwards compatibility

Am working from NJ with a client in CA. She is struggling to export her FCP movies into a .mov format that will play on quicktime (specifically on OLDER versions of quicktime). I've been able to assist her in exporting to the .mov format, but it only plays in the quicktime 7 player. Most of her customers do not have that installed and thus cannot view the movie (and, they do not want to take the time to install).
I would like to be able to walk her through the steps/settings/parameters necessary for her to export into a .mov format which will play in older quicktime players (without forcing the user to update their player).
example of .mov: http://advertisingusa.tv/0_home/index.shtml
many thanks in advance,
windandkitesurfer

Trying to export from FCP to backwards compatible .mov or .mo4 format.
We're trying to use Sorenson 3 compression, and are able to create this but the file is created without any extension.
We are using FCP, export using quicktime conversions, then under options->settings->compressor type = "Sorrenson Video 3"
Still are not able to create a movie file backwards compatible. Any further assistance greatly appreciated.
Note the time lapse between emails due to the problem of communicating coast to coast - the web developer is not the first in line for return emails
regards
Mac OS X (10.4.8)

PAL files exported from FCP don't display

This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
Any ideas? This seems to be a new one.

Does the computer your using to view this video have Final Cut Pro installed?

Best way to export from FCP for website

I've been reading around about this and am not getting a clear idea of what to do...
I have some short sequences in FCP (longest is 2 minutes) that I want to post individually on my new website (that I'm just learning about).
I want to export them in a way that is a small file but that looks and sounds good, and also that can be played by most or all computers.
So I guess that is two questions: settings for export from FCP, and how to control how it will be viewed.
Thanks so much, anyone with ideas or experience!

We don't know what format you are dealing with, ratio etc.
However, some short answers for you.
For best quality at a considerable small file size the choice is, yet again, H.264 (Require QT7 or higher. For universal compatibility you may need flash conversion).
FCP main menu>File>Export>QT Conversion>Options> the higher the bit rate the better the quality but the bigger becomes the file size. Size : i.e 320x240 if 4:3; 480x270 if 16x9). Choose AAC (Not PCM) as sound format (192 target bit rate).

Exporting from FCP to Soundtrack Pro looses files!!!

I'm working on a project shot on an f900 HD camera with the tapes downconverted to HD-DVCPro to quicktimes. I sb-clipped the QT and I re-synced the audio with the .wav tracks recorded on set. My sequence is set up for a .wav project. I've exported a sequence from FCP by using both Send to Soundtrack Pro and exporting to Soundtrack pro. In both cases I received an error and when I went back to FCP some of my clips were gone. They weren't in the trash or in the Capture folder> I did a search for the file names and they had vanished, or had been renamed. Anyone had this problem before? Should I dump the STP then re-install it? I'll look at Apple support page. Is there a problem between the .wav and aiff? Can Soundtrack Pro bring in .wav or is it only aiff?

Welcome To  Discussions justjewell!
As a Host has relocated your Topic to a more appropriate Forum, it is not necessary for you to repost elsewhere, at this time.
But for future reference, please review the first entry How To Post A New Topic, on Feedback About Discussions.
That is the Forum where you erroneously posted your issue.
ali b

Newbie question: How to share large QT movie files exported from FCP X?

Well, I've navigated through FCP X for the first time and I now have 16 QuickTime movie files I have exported from FCP X. Each file is a song from a live band performance. The files are:
- Apple ProRes 422
- 1920 x 1080
- 24-bit
- Frame rate 29.97 fps
Now I need to share these files with the band members. They will use them for two purposes:
- Watch, as feedback on their performance. In this case, I'd like to preserve the quality as much as possible
- Put some of the movies on YouTube, where quality will be lost, of course. They may post only short clips from the songs.
These 16 .mov files total 115GB. The smallest is 6.5GB, the largest is 13.9GB.
The quality of the movies is fantastic, both video and audio. I cringe to think about degrading the quality............but I have the practical problem of how to get the files to five different band members.
I normally distribute audio files I've mixed in Pro Tools via DVD-R discs, but the files are much smaller.
What are my options for sharing the files?
Do I need to use an application like Compressor to compress the files (ugh) to get them onto multiple DVD-R's?
I would assume this is a common problem that all FCP X users deal with.

I strongly recommend you to use Compressor. It is easy to use and there a lot of presets.

Best way/settings to export from FCP to DVDSP

Hey - I have a program I need to export from FCP to DVDSP.
It is approx. 1hr 15min long.
What would be the best settings to use to maximize quality?
I also want to include chapter markers for importing into DVDSP - is it better to create these in FCP or Compressor???
This is a very important showreel and quality is a major factor...
I am using: FCP 5.1.4 DVDSP 4.1.2 Compressor 2.3
Thanks for all your help in advance!
PowerPC G5 Mac OS X (10.4.9)

Hi:
<< What would be the best settings to use to maximize quality?>>
You didn't mention your movie codec. Assuming you are using DV, if your FCP projects has graphic elements and heavy filters like Color Corrections, etc. you must get the best quality exporting directly from FCP through Compressor.
If your movie is basiclally DV video with no graphics, you probably will get same quality and shorter encoding times exporting as QuickTime movie, self settings (self contained is my favorite flavor!) and using this file in Compressor.
In Compressor use the DVD: Best Quality 90 min preset as starting point taking the MPEG2 and the Dolby 2 (AC3) presets. You most probably will get the best audio level changing the followings parameters in the standard AC3 preset:
- Dialog Normalization: -31
- Compression preset: None
Using uncompressed (AIFF/PCM) audio in DVD-Rs is a major cause of playback problems and/or building errors because the high bitrate, and takes a lot of your disc space.
If you encode inside DVDSP (using the Quicktime movie file directly in DVDSP) you'll get AIFF audio. DVDSP doesn't encode your audio to AC3.
<<This is a very important showreel and quality is a major factor...>>
To save encoding testing times, take a short part/s of your movie and make some encoding test. Select some parts of your footage with fast movements in the image and/or heavy transitions to check the final result.
<<I also want to include chapter markers for importing into DVDSP - is it better to create these in FCP or Compressor??? >>
Allways create your chapter markers in FCP or Compressor. That way you can set the exact frame where to locate it and DVDSP will preserve that position. If you add a Chapter Marker in DVDSP it will be moved to the nearest GOP boundary, not in the exact frame you decided. Check this tutorial about Chapters and Compression Markers .
Don't forget to post your FCP movie codec/settings.
<<StirFry..>>
I think that a bitrate of 7.9 Mbps with uncompressed audio (DVDSP doesn't encode audio to Dolby 2) is too high and can cause some encoding/playback errors in some DVD players. Someone else can post his mind about this ! ;D
Hope that helps !
Alberto

Exporting from FCP HD using QT conversion

Similar Messages

Maybe you are looking for