Exporting to Mini DV aspect ratio problems

Hi There,
I am trying to export a 16:9 standard def iMovie project to my panasonic MiniDV camera (also set to a 16:9 format). As the cam receives data from iMovie (via firewire out to DV input), the camera auto switches from 4:3 and 16:9 (16:9 whenever titles are displayed in the project). Very frustrating?
Any ideas?
For now I will try to save the project as a DV stream, reload into iMovie and then try exporting it again to see if that works?
Otherwise, I would like to know if anyone has any other ideas.
This is my first 16:9 project. I never had probs when I was working in 4:3 and exported projects to my same cameras.
Thanks, Carl.

Hi Carl,
I too have encountered this when sending back to tape. Some 16:9 parts being changed to 4:3 on the camera. I have noted that this happens with clips made from photos in conjunction with the Ken Burns effect.
The workaround is to take your finished movie and export it to your desktop as a full quality QuickTime movie. Then re-import that movie into iMovie and send it to tape. Works for me.

Similar Messages

  • Still no fix for aspect ratio problems

    I was hoping this new version would fix the aspect ratio problems with importing clips other than in the DV codec, but alas, it was not to be.
    My problem is that if I import a clip that is 720x486 (non-square pixels, uncompressed), iDVD doesn't interpret it correctly. It places the clip with small black bars (like a little letterbox) at the top and bottom of the screen, then scrunches the image vertically, sprinkling it with stairstep artifacts.
    What's frustrating is that versions up to iDVD 4 didn't have this problem and imported clips in any codec beautifully. It's been a known issue for a long time.
    Furthermore, Apple's solution is to convert the clip to a self-contained DV movie (hello, disk space!), which is also undesirable because of the quality loss and poor colour compression. After the latest QuickTime upgrade, exporting in DV doesn't work, creating a clip that is half-field and blocky.
    Argh! This is a real problem because many of us use iDVD to make screeners for clients, and it looks unprofessional. It's also a very inaccurate and somewhat useless tool when the clips are of clean lines, titles, and smooth, solid graphics, which show the stairstep effect the most.
    I'm at my wit's end having exhausted all other suggested solutions (and please don't tell me to use DVD Studio Pro instead). Anyone else come up with a fix or have the same issue?
    Previous discussion on this issue here: http://discussions.apple.com/thread.jspa?threadID=204675&tstart=0

    Sorry, but the answer is - for professional use, use
    DVD SP
    No, it is absolutely not the answer. EVERYONE I know in my circle of professionals uses iDVD for banging-out quick screeners of TV spots, film clips, dailies. In fact, it's one of the main reasons they added OneStep to iDVD. DVD Studio Pro is for authoring commercial-level DVDs, with a learning curve and pricing structure appropriate to that.
    I'm not going to spend time learning DVD Studio Pro just to do quick one-offs, for one, and it's overkill anyway. Not only that, but it costs a lot more than iDVD.
    The inablity to import a QuickTime clip -- on Apple software, no less -- is not cool, especially since it doesn't seem an excessive thing to ask (and it used to encode just fine). It's a very basic task considering everything else iDVD has been written to do, and crosscoding and re-encoding video is a basic functionality in QuickTime.
    I'm not asking iDVD to prove the existence of dark matter in the universe; I'm just asking it to play a QuickTime movie properly. Which is what it's supposed to do.
    There was a work-around, supplied by Apple, but it no longer works for me, so that's why I'm asking what worked for others.

  • H.264 pixel aspect ratio problem after update

    Yesterday I updated Premiere Pro CC and Media Encoder CC to version 2014.2. But now I am having pixel aspect ratio problems with the H.264 codec when I export a 1080i50 sequence to PAL widescreen. The problem also seems to occur with other frames sizes.
    I am using the same settings as usual with Aspect set to: D1/DV PAL Widescreen 16:9.(1.4587). However, VLC and Windows Media Player play the video with a 5:4 ratio. So it looks like the pixel aspect ratio information is not passed to Media Encoder or to the file.
    This problem does not affect other codecs like AVI or MPEG-2, these are correctly displayed.
    Is there anyone else having this problem? And more important, does anyone know a solution?

    When creating files for computer/online playback (not editing), then best practice is to simply use square pixels with 1.0 Pixel Aspect Ratio, which will ensure that ALL players correctly display your video, no chance of problems.
    Export as 1024x576 with 1.0 PAR and that is the square-pixel equivalent of PAL DV widescreen.
    For NTSC users, I've seen it two ways, either 864x480 or 854x480.
    Merry Christmas
    Jeff Pulera

  • PRE7: Aspect Ratio problem even before opening source media file

    Hi,
    I am a newbie in Premiere Elements. Read a lot of threads with aspect ratio problems, but didn't find similar problem to mine, so decided to open a new discussion.
    I am shooting video with Samsung HMX-H105 SSD camcorder, in 16:9 widescreen HD video.
    When I try to make DVD from the MP4 file from the camcorder, it gets skewed even before opening it, when it is seen in the right hand pane with the Media file previews. I am not sure if somebody can understand what I am trying to tell so I have a screenshot of a video that I shot with my camcorder and a video that I have downloaded, shot by someone else with Samsung HMX-H20 in 16:9 HD as well.
    So even when I start a new project in 4:3 and not 16:9 my videos always get stretched. This is why I think that maybe Premiere Elements doesn't understand the aspect ratio of my MP4 video files - it can be seen in the left hand side pane, where I have circled (with white elipse) the black stripes above and below the video.
    Hope that somebody can help with my problem.

    You ROCK
    both of you
    Thanks wine_snob for pointing me how to find the Interpret Footage option.
    And thanks to Steve for solving my problem
    In the "Interpret Footage" and "Pixel Aspect Ratio", the working video says: "Use Pixel Aspect Ratio from File: Square Pixels (1.0)"
    but on my problem video it says: "Use Pixel Aspect Ratio from File: Other Aspect Ratio (1.778)", so I changed it to "Conform to: Square Pixels (1.0)" and now I have perfectly proportinal video for 16:9
    Thank you once again!

  • Aspect ratio problems in exporting HD movie

    Hi
    I have a movie shot in 1920x1080p HD from a DSLR. It's two and a half minutes long. There's some titles, a few photoshop layers, a flash file and some simple voiceover audio. Nothing too fancy all in all.
    All I need to do is convert it in the same ratio so that it can play in Quick Time, but everytime I put it through the AME, it comes back slightly squished (not 4:3, but definitely not 16:9).
    I've tried QT, H.264, Mpeg2, default presets, custom presets, everything. In the output box it displays my video exactly how I'd like it, but the finished product comes out differently.
    The only success I've had is exporting as an MPEG4 file, and the aspect ratio comes out good, but the video itself is choppy, which none of the others are.
    File sizes have ranged from 230mb to 2.3gb, so eventually I'd like to keep this down, but for now I'll be happy with anything!
    Thanks for any help...

    Thank you so much. Works a treat. That sorts me out for most of what I have to do.
    If I can bother you with another question...
    I need to eventually put this video into a powerpont presentation created in mac. With a small .mov file that's fine to play on other macs. But I will run into problems when I need that powerpoint presentation to run on a PC. I think I need an MPEG file version to run on a PC.
    If that's correct, how do I create a non-jumpy mpeg file that's small enough to go into powerpoint. Can I do that on  AME or is it simpler to convert my .mov file in QuickTime to mpeg?

  • Exporting 1080i, Pixel Aspect Ratio Problems

    Hello everyone,
    I've been dealing with a lot of different format projects recently: SD, HDV 720-24P, and HDV 108050i.
    For now, these projects are intended for internet delivery. I've not had too much problem exporting the SD and HDV 720-24P projects, but the HDV 108050i has been very frustrating.
    When I export SD and HDV 720 in compressor, I set the pixel aspect ratios to NTSC and square, respectively. But when I try to set the pixel aspect ratio for the 1080i to "1080i 16:9" (which I believe is 1.333:1), it rejects my choice, choosing "default" instead. When compressor finishes exporting, my 1080i movie looks very squished horizontally.
    The only success I have had is in exporting via Quicktime conversion, where I duplicate my compressor settings, but do nothing to the pixel aspect ratio (since there is no option to change it in quicktime, it seems). The movies I have exported with Quicktime have been fine. I don't know if it makes a difference, but when I try to export these 1080i clips, I am in the proper 1080i "easy setup."
    I know almost nothing about this pixel aspect ratio business, but I believe it is the cause of my problems (since I am using the proper 16:9 aspect ratio for movie width x height).
    My Questions:
    1. If I am understanding the problem correctly, how do I get compressor to acknowledge the right pixel aspect ratio for my 1080i footage, rather than the incorrect "default"?
    2. If am not understanding the problem correctly, what might be going on?
    3. Can anyone point me to a useful resource about pixel aspect ratios? I've been searching the forums and online, and I thought I was getting a grip on things but it seems I am still way over my head. For example, what is the significance in Final Cut Pro of changing your viewer or canvas to not show square pixels? Do you need to format for square vs. non-square depending on the final delivery destination (not the source format)?
    Thanks!
    Message was edited by: Haberdasher

    Sorry to bump, but any ideas?

  • Aspect ratio problems when exporting from FCP and creating DVDs

    Hi there
    Can anyone help? I'm using FCP to edit material shot using a Sony z1 in SD 16:9 mode. My media displayed correctly in FCP with the 'anamorphic' option ticked in the browser.
    I then exported my short films as QuickTime movies and created a DVD in iDVD using those video assets.
    When I then viewed the films on a widescreen tv, the films did not display at the correct aspect ratio. They were horizontally elongated, as though they had been stretched twice over, so that objects, people and text appeared fatter than they should.
    Can anyone let me know whether there are any settings I could change in either FCP or iDVD to stop this happening?
    Many thanks!
    Jacqui

    this thread may help
    http://discussions.apple.com/thread.jspa?messageID=7422463

  • Aspect ratio problem with original footage.

    I use a Canon mini DV camera (MD160) that shoots in widescreen, and I do all my editing in iMovie 08, all projects are Widescreen 16:9.
    No problems until now, but I imported footage the other day that came up squashed (pillarboxed) in 4:3 size. The thumbnails are normal size (widescreen), as they always have been, but the preview screen has cropped the footage to make it fit in my widescreen project. So I'm losing some of my shot.
    What really messes me up is that this has happened to random pieces of footage from 6 months ago too, but some footage from last week is unaffected. It is NOT THE PROJECT that has changed, but the original imported footage in my event library, which was always widescreen. Even original shots I took with the iSight camera have changed to the squashed format.
    And I obviously can't e-mail Apple, so what's going on? Is there any idea out there what caused this? And how do I alter original footage - I don't want to crop, so is there any way to stretch a 4:3 image into 16:9 - if I can, it will look fine, back to normal.

    <font color="blue"The thumbnails are normal size (widescreen), as they always have been, but the preview screen has cropped the footage to make it fit in my widescreen project. So I'm losing some of my shot.</font>
    The thumbnails use the current embedded "scaled" dimensions to create the aspect for the thumbnails. On the other hand, the project ignores the current dimensions and uses the embedded aspect flag to set preview display and export/share output.
    If you then "move rejected clips to trash", it deletes the bits you don't want, but then converts the remaining section into a "mov" file. This is what has been happening to my footage. So basically I can't get rid of extraneous footage (60GB+ of the stuff!) without altering the aspect ratio of my movie. How do I stop this happening?
    Thanks for posting this information. It seems that when the "kept" file segments are copied to the new file container, the aspect flag is not copied. Believe this should be brought to Apple's attention ASAP as an enhancement (or a bug since it does not adhere to aspect flag priority use in main routines). Will run my own test to confirm this and likely post my own feedback report. Suggest anyone else having this problem add their support to get this corrected as soon as possible.

  • Aspect ratio problem - I think

    I've recently started using Compressor and have found it to be a very great app.
    However, I'm experiencing a problem that I can't seem to resolve.
    I shoot and edit HDV footage in FCP. After I generate a Quicktime movie (self-contained) - I'll fire up Compressor and add the .mov file. I wish to make a DVD so I select a setting (usually DVD Best Quality 90 mins.) and then click submit. Compressor generates two files that I drop into Toast and burn a DVD. The footage is in 16:9.
    I take the DVD out after burning in Toast and pop the DVD into a player.
    The problem is that the footage's aspect ratio is spilling over when viewed on a 4:3 aspect TV. This isn't good since my lower thirds get cut off. on the left by just a bit.
    So what can a do to remedy this? Any help is greatly appreciated. Thanks.

    So there's no way to compensate or correct in compressor other than to redo the titles in FCP?
    Hi,
    Your current self-contained movie has now become an independent movie from the original timeline and all tracks from your timeline are merged together into 1 QT movie.
    You can add text in Compressor as I said earlier but in this case you need to go back to FCP and simply do a few adjustments to your titles (being guided by the show title safe function), that shouldn't take long.
    You don't have to necessarily export as self-contained movie. By unchecking the self-contained box you create a reference movie (meaning that you create a file reference to your current edit without exporting/copying the correspondent media used) which you can import into Compressor.
    You can also send the timeline straight to Compressor (Export>Using Compressor).
    G.

  • Premiere exports in incorrect pixel aspect ratio

    My Panasonic camera shoots quicktime .mov JPEG videos in a 720X408 px resolution. I am having a very hard time editing them in Premiere, because I cannot get it to export them in a correct pixel aspect ratio.
    Maybe you can figure out what I'm doing wrong. Here's what I do.
    First, when opening a new project, the closest frame size I can choose is 720x480. So I choose that. I import the .mov file into it, and put it on the time line. At that point it looks like this:
    http://img291.imageshack.us/img291/812/premierewindowoc9.jpg
    Correct aspect ratio and no deformation.
    When I try to export it as a .mov file, I do the following: I click on settings (in the file save dialogue), and go to video settings. I can choose any pixel aspect ratio, it all produces the same results, but for example, let's say, DVCPRO (1.5) (that's the closest to the size I need).
    I can manually set my frame size to be 720x408 px, assuming that now the frame size will be exactly the same size as my video and no deformation will occur.
    However, the result I get is this:
    http://img6.imageshack.us/img6/6730/exportedmoviehl5.jpg
    I've drawn arrows on that to make it clearer. So, I have a movie that's 720x408px. Premiere exports a frame sized 720x408, but then for some strange reason shrinks the actual video down to 483x480!!??!! Leaving completely unnecessary black bars on the sides.
    Why does it do this?
    When I export it with frame size 720x480, it doesn't add black lines on top and bottom as you'd expect. It does exactly the same thing you see in the image above.
    I have tried many other combinations too. I have tried exporting it as every other available pixel aspect ratio, also as an avi file, nothing makes any difference. It always shrinks the original video in width, and adds black bars to the left and right.
    What am I doing wrong??

    Tina,
    Lets see if we can get kitty onto YouTube.
    There are four issues, that you will need to overcome:
    1.) Project Preset to begin. Stanley lists the possible choices in post #8, based on the specs of your camera. You will have to determine which of these you used to record the files. These are *probably* set in your cameras menu area, and if you have not changed them, are probably still set. That will get you started in the right direction - but wait, theres more...
    2.) It seems that your camera uses Motion-JPG as the encoder to create these files. There are at least two good Motion-JPG CODECs available, Lead and Morgan. Plus, your camera may well have come with its own Motion-JPG CODEC. The CODEC is what allows your camera to encode/compress the video data, and also what allows programs like Premiere to decode that data. Did your camera come with a CD/DVD with software on it? If so, the installation of that software *should* install any proprietary CODECs to your system. Now, if this was the case (or soon will be the case, when you locate that CD/DVD), Premiere *possibly* will be able to use that CODEC to handle the footage from your camera. If it does not, then it is *possibly* only a matter of purchasing, downloading and installing one of the two mentioned Motion-JPG CODECs. Both are relatively inexpensive, and Premiere *usually* can work with either, though your exact footage might not permit this. This is usually because a camera mfgr. chose to do their own thing. Thats why any disc that came with the camera is the first place to start.
    3.) Now, you are in Premiere, have the proper CODEC installed on your system, and have Imported the footage into a Project with the proper Presets. If all is working, and I hope that it is, you just edit your footage.
    4.) You have been working with Presets established based on your footage. That is likely not exactly what you will want to upload to YouTube. This is where Export comes into play. Unfortunately, YouTube seems to change the specs. weekly. About the time that someone publishes fool-proof details and settings for YouTube, they (YouTube) change everything. The best advice is to search as many fora, as you can for Export Settings for YouTube. Look at the dates for all articles. You really will only care about the most recent - very recent.
    Going back up the list, there is another possibility. That would be to use a 3rd party conversion program to convert your footage to a DV-AVI Type II file. Often, with the proper CODEC installed, Premiere can do this internally, though not always, and even when it works, there can be problems. I use DigitalMedia Converter (Deskshare) a shareware program for most of my conversions. There are many freeware, and shareware, conversion programs available. Many get mentioned in this forum. Many get glowing reviews. Some are easier to use, than others.
    Some balk at the thought of owning Premiere Pro and then having to use some 3rd party software to get their footage into a robust NLE, that they paid good money for. The fact is that Premiere Pro was designed to work primarily with DV-AVI Type II files, from mini tape cameras - the point made by several. That does not mean that it cannot work with other file types. It does, though not always without problems. Sometimes just passing the material through a conversion program will clear up all problems and no one is the wiser. I often use Premiere Elements, Pros little bitty brother, to convert some file formats, because it is more tolerant of many of these, than is Pro.
    Good luck, and sorry that I do not have a current suggestion for Export to YouTube. Since it is a hot distribution medium, you should have no problem finding the correct settings for today - be sure to check the date of all articles, as the specs change all the time and in a heartbeat.
    Let us know if you have any more questions. For "how things are done in Premiere," I recommend the Premiere-wikia: http://premierepro.wikia.com/wiki/Main_Page
    for tutorials. Most that you could want to do will be there someplace. The current YouTube setting might be an exception, just because every time the Wikia gets updated, that info is out of date.
    Hunt

  • Aspect ratio problem with AVCHD in iMovie 08

    I am importing footage from a Panasonic HDC-SD9 into iMovie 08. the footage gets in there fine and looks great EXCEPT that the footage (all shot in 16:9) is squashed a little bit. in the preview clips below, it looks fine, but in the player above (and if I export it as a Quicktime file) it is squashed slightly. there are black bars above and below the footage, and (I'm guessing) were the video stretched to fill the entire area, eliminating the black bars, it would be the correct aspect ratio. I've tried importing footage form the camera supposedly shot in 4:3, and the same thing happens.
    I know that I can simply do a quick edit in imovie, export it, import it into final cut pro, and stretch it back. however, I'm worried about losing quality, and more importantly, I don't know the exact ratio, since I can't even figure out what imovie is doing to the video to make it squashed, let alone in what manner.
    the footage from the HDC-SD9 is AVCHD, and I understand there is something about square pixels vs. rectangular, but I don't know much about it. I have tried every iteration of imovie's limited aspect ratio settings, and I can't get it to work. I know it's meant to work well with AVCHD, so I'm assuming I'm missing something fundamental and simple. (some box to check to let imovie know I'm importing AVCHD?) it's maddening to see the footage correctly in the thumbnails, but squashed for (seemingly) no reason in the playback. can you help me out? otherwise I am going to film myself holding something that is a perfect square, then import it to imovie, then export to quicktime, then import the quicktime file into finalcut, then stretch it til the rectangle becomes a perfect square, and write down the settings for the future. seems ridiculously complicated, especially for the mac world.
    I love imovie 08 (seriously, some of the new toys are just so amazing, and no render time at all!), and I love this camera. please tell me they can get along!

    I think I'm having a problem similar to this. I'm using a Sharp MiniDV camera, and shooting in 16:9. When I used to import to other versions of iMovie it worked fine, but w/ iMovie 08 it is squashing and stretching the incoming video to more like 20:9 (I have no idea what the actual ratio is, this is just a guess). I tried changing import to PAL 25fps, but that didn't do any thing. Any other suggestions?

  • Can the screen be cropped to and exported at a custom aspect ratio?

    I think I'm needing Premier to do something it's just not designed to do. What I need to do is to take five or six different screen and audio captures of the same event (a 3D virtual reality instructional session), each representing a different person's view of that event, assemble those in a split screen, synchronize them to the designated "main" capture's audio, delete the other audio tracks, and add CG title labeling each one. The effect is like looking at a display showing six security camera images. From what I can determine, it is possible to do those things in Premier.
    However, what I then need to do is to crop out any extra space to the left and right of that split-screen image and export the file as a .mov with the aspect ratio produced by the cropping so that the videos are as large as possible and are not distorted from resizing them to fit the standard aspect ratio. Depending on the size of the screencaps, the resulting .mov might have nearly a 1:1 ratio. What is critical for this is that the video be as large as possible and the "black" space be as small as possible so that the person who comes in later to analyze these composite videos can see everything  as clearly as possible. I also need to crop on the fly; because these images aren't always captured at the same size, it is impossible to preset a size for the resulting video.
    We've been using a screen capture tool to do this that works but is a pain; clips can only be moved and resized by mouse-drags, and the software has to import to and export from its own proprietary format, which is very slow. However, ever piece of "real" video editing software I've looked at only seems to export in TV or film aspect ratios. Quicktime Pro looked for a bit like the best bet, but it doesn't seem to be able to handle multiple audio tracks (which are necessary since I have to synchronize tracks by ear much of the time).
    Is what I'm describing--exporting .mov files while preserving custom aspect ratios that are created by cropping during editing--something Premier can do? If so, would it be something fairly easy for complete novices to do?

    medeamajic wrote:
    On a Mac based system ScreenFlow might work best but on the PC side FRAPS might work best. You can do what you want to do with Premiere Pro once you record the screen capture. As Stephen_Spider mentioned you might need to crop and even resize the images. FRAPS can record at 1/4 the screen resolution and still have decent results. PP CS 5.5 can play several layers (6 PIPs) of the FRAPS codec at 1/4 resolution in realtime.
    Thanks, but we cannot change the screen recording process. According to the study's protocols, the virtual world has to be full-screen or almost nearly so during the session, and that full screen has to be captured for analysis. Resizing the screen captures is not a problem (especially since I already said I'm doing that), but if you're saying that Premier can only play back up to six screen captures simultaneously if they're captured at 1/4 screen, then that's a deal-breaker right there.
    By the way, here's approximately what each of the completed composite videos looks like:
    Screencap 1
    Screencap 2
    Screencap 3
    Screencap 4
    Screencap 5
    Screencap 6
    Each screencaptures is resized to the largest consistent size that will fit into this format, and then the resulting video is cropped to the outside border. If there are only five screencaptures, I simply center the single one on the bottom on the "center line."
    And, to be clear (though I've said this several times already), this is something that is already being done. We probably have more than 60 of these .mov files, each around 45 minutes long, with five or six synchronized screen captures in each. Frame rate etc. has not been any issue with these, and neither has playback of the .mov file from HD or DVD.
    Message was edited by: singerm2

  • 16:9 Apple TV export playing with incorrect aspect ratio in iTunes.

    Hi, I've exported a 16:9 PAL movie from FCP using 'Export for Apple TV' which plays fine in Quicktime (1024x576 m4v file), my problem is when I import it into iTunes it changes the aspect ratio to 720x576. If I 'show in Finder' and play the iTunes import using Quicktime it plays fine (1024x576).
    So it seems a problem with iTunes?
    If anyone else has fixed this problem I'd love to know how.
    Many thanks,
    Dave

    For anyone interested...
    I've been in contact with Elgato http://www.elgato.com/elgato/int/mainmenu/home.en.html
    regarding this as they are part of this issue.
    They have confirmed that there is a bug in the latest releases of iTunes that is causing the problem.
    They have been communicating their information to Apple but have had little response to date.
    Maybe we'll get a fix when Apple could be bothered.

  • Aspect ratio problem with consumer camera and Premiere Elements 11

    Hello everyone - I'm Steve. I'm new here. I do still photography on a pro level, digital and analog, but I am an absolute dummy with video...but then, I don't want to do much, just rudimentarily cut a few family videos, upload them, etc.
    However, I can't get Premiere Elements 11 to output my self-shot clips in a correct aspect ratio.
    My camera is a consumer-model Canon Legria FS200. I shoot video in a resolution the camera calls XP. The camera says they are 16:9, the camera monitor shows them as 16:9, and when I use the software (called Pixela Image Mixer) that came with the camera to import the clips to disk, I get mpg files that Windows (7) Explorer says are 720x576 pixel, and that VLC player correctly displays as wide-screen 16:9 without me having to tweak its display settings.
    However, the moment I import them into Premiere Elements, they appear horizontally squeezed, and I can't seem to output them any other way, with or even without editing them in Premiere. 
    I tried to use the recipe given here: https://forums.adobe.com/message/5987538#5987538 , (replacing only NTSC with PAL because I'm in Germany),  namely, setting the project preset set manually for PAL/Hard Disk etc/ Widescreen 48kHz and check force selected program settings. But no matter, Premiere displays the video in horizontally compressed form, with large black bars to the right and to the left.
    On the export side, setting the output to PAL DVD Widescreen and setting the Pixel Aspect Ratio in the output settings to Widescreen does not help, either. Neither can I force VLC player manually to display the correct aspect ratio. BTW, audio is perfect all along.
    This is about as far as I can see myself getting without help. Has anyone any idea?
    Thanks a lot in advance,
         Steve, from Germany

    Steve
    I see that you are now in the Adobe Premiere Elements Forum with your problem already solved.
    I did not see any Why for what you encountered, so I thought I would give you my take on this.
    Your Canon FS200 gives video with MPEG2 video compression with a .mod file extension. That .mod file extension can be found in use with some Canon as well as JVC cameras. The .mod file history with Premiere Elements (any version) is problematic. In some instances, the user needs to rename the file extension from .mod to .mpg before it can be imported, but not always. But, the .mod widescreen comes packaged with the aspect ratio dilemma, presenting as 4:3 rather than 16:9. The classical argument is whether Premiere Elements does not recognize a .mod file's 16:9 flag or whether the 16:9 flag got lost.
    There used to be a utility contributed by an user to handle the file extension and/or aspect ratio issues. Now, the general fix is to import the file into Premiere Elements (in your case 11) with Add Media/Files and Folder/Project Assets. And in Project Assets, you right click the file, select Interpret Footage, and go to the Pixel Aspect Ratio section of the Interpret Footage dialog where you
    (a) dot the Conform To:
    and
    (a) set the Contorm To: field to (in your case) D1/DV PAL Widescreen 16:9 (1.4587)
    Once you are in the program and have the file on the Timeline, if any black edges, you can click the monitor to bring up the image's bounding box. Then drag on a bounding box handle to scale the image just to the point where the black edges are gone.
    If you ever need the Adobe Premiere Elements Forum, maybe bookmark this link
    Premiere Elements
    You should expect to have this issue with any .mod widescreen file that you obtain from your Canon FS200 camera.
    ATR
    Add On...If you are depending on the program to set the correct project preset, you may want to check into what it is setting based on the properties the first file you drag to the Timeline. A manual setting of the project preset may be in order. Please see
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting

  • Aspect Ratio Problems with iDVD

    I am putting together a video presentation with video from several different sources.  I have had a whale of a time getting the video to display uniformly at the same aspect ratio.  I put all my separate clips into Quicktime Pro and set the aspect ratio to 960 X 540.  FINALLY, in Quicktime Pro I was able to assemble the full video so that ALL the footage played in 960 X 540 and looked seamless.  I thought I was in great shape.
    Then......I thought I would test the video in iDVD because I need to burn about 40 copies of this presentation.  Lo and behold, iDVD takes part of the video footage and somehow changes the aspect ratio of certain footage.  Part of the video plays in a small postage stamp area in the upper left of the screen, while other segments play in full widescreen just fine.  Obviously, my aspect ratios are still messed up somehow, even though the the entire video plays in full 960 X 540 glory in Quicktime Pro.  I'm stumped.
    Anybody run across this problem in iDVD before?

    Wow, nobody qualified to help me with this problem?
    I'm finding out, thanks to more research on my part, that iDVD does not like the aspect ratio of 960 X 540.  The only reason I used that setting is because part of of my video has an iMovie 9 "trailer" and iMovie 9's "large" export is set to 960 X 540.  The weird thing is iDVD handles segments of my video that is 960X540 just fine, but it completely bungles up the iMovie 9 trailer segment that is 960 X 540.
    I have also found in further testing that iDVD does like a .move file in 853 X 480 and displays that aspect ratio in full widescreen glory.
    Hopefully this information will help somebody someday avoid the headaches I have had.

Maybe you are looking for