$ expression while creating Query using Query generator

hello friends,
I m using qurery generator for Approval templates. I want Quantity value of GRN at a runtime.So for that I have to write a query I got some example of that for Business partner this is done using $[$3.24] for card code in business partner.But I want to know about this $ expression with following number.
I found this query while searching
SELECT (T0.[CreditLine]-$[$3.24.Number]) FROM OCRD T0 INNER JOIN POR1 T1 ON T0.CardCode = T1.BaseCard WHERE T0.[CardCode] = $[$3.18]
Plz tell me abt this $ expression frm where its come.Is it store somewhere??
Thanks & Regards,
Swati
Edited by: Rui Pereira on Dec 23, 2008 4:49 PM

Hello Swati,
It has something to do with Format Search. Please find the attached for Format Search Introduciton. Or you may go to Forrum [SAP Business One|SAP Business One Application; for more information, which is the right place for this question. Thanks.
Regards, Yatsea

Similar Messages

Scrollbar appearing while creating pdf using AlivePDF

Hi,
I am facing a problem while creating pdf using AlivePDF.
I have a VBox on which I am adding multiple pages. If the content overflows it shows scrollbar. All this is working fine.
[PHP]
<mx:VBox x="0" y="80" width="705" height="560" id="content"></mx:VBox>
[/PHP]
When I create the pdf using the following code it shows scrollbar in generated pdf (attached screenshot) while I want all the content without scrollbar
[PHP]
var pg:DisplayObject;
pg = content.getChildAt(i);
var pdf:PDF;
pdf = new PDF (Orientation.PORTRAIT, Unit.POINT, Size.LETTER);
pdf.setDisplayMode(Display.FULL_WIDTH);
pdf.addPage();
pdf.addImage(pg, new Resize(Mode.FIT_TO_PAGE, Position.CENTERED ),0, 0, 0, 0, 0, 1,true,'PNG',100);
[/PHP]
Please suggest what changes should I make to fix this.

If the report didn't change, then perhaps the data did. Check
to make sure the data being supplied to the report is as expected.
I have run into mysterious errors where an expected value was of
the wrong type or a required value was now blank. It is also
possible to have existing logical errors in an iif() or other
dynamic evaluation expression that was not previously examined;
until now. So, is there any unexpected or exceptional data the
report cannot handle?

Problem while creating queries using SQVI

Guys,
I have many diff versions of sap's. 4.6c, 4.7, 4.7uc, 5.0, 5.0uc and so on......
I have to few queries in 4.7 in SQVI, i have to make it in sync in all the othr servers.
I have created all of them in all servers, but while creating in 4.6c, when i am using option "table Join" while creating query in SQVI, the system doesnt take me to next screen.
What could be the problem. Its going to next screen when i use option "table" but not when i use "table joins".
Can v transport these queries ( i mean SQVI queries, not those in sq01 ).
Helppp..................

used table view

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Entity Attributes are not populating while creating EO using EO wizard.

Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
Sagarika

Please ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ

Problem creating basic views while creating materials using idocs?

hello,
I am facing an issue while creating materials using idocs. The problem is that the basic view does not get created whereas other views are present. The function module used is idoc_input_matma01 and the basic idoc type is MATMAS03.
Looking for help. Thank you

Hi Madhu,
Actually i recieve an idoc from PI containing data required for cretion of the material via an idoc. This idoc is then processed to create the required material.
The material gets created with appropiate data in various tables(mara, makt) but when we view material in mm03 we cant see the basic data views.

Problem while creating assets using BAPI

Use table enhancement BAPI_TE_ANLU
Diagnosis :The BAPIs for creating and changing assets currently support only those customer enhancements that relate to the user fields created using SAP enhancement AIST0002.
Can anybody give the appropriate solution why this error is coming while creating assets using BAPI.

Looks like you are trying to transfer custom fields into the asset master data that were not added following the steps in enhancement AIST0002.
Using EXTENSIONIN parameter, you can transfer user fields from the asset master record. However, it is not possible to transfer fields that are updated in user-defined tables. Only user fields that were defined using SAP enhancement AIST0002 and are automatically updated in table ANLU can be udpated in this way. This means you have to use table extension BAPI_TE_ANLU.
Enhancement AIST0002 contains function module EXIT_SAPL1022_001 as a component in which user fields can be implemented.
The documentation ( BAPIPAREX) of the structure that forms the basis for this parameter contains additional information about using this parameter.
Please check how table ANLU has been enhanced and also go through the documentation of enhancement AIST0002.
Regards,
Shyam

Error while creating query in Adhoc report

Hi Experts,
when i am creating query using tables bseg,bkpf and kna1(logical database BRF) and vbrk,i am getting error as "query Specifications cannot be used to generate list" in SQ01.I linked BRF logical database with vbrk by using condition vbrk-vbeln = bkpf-awkey.
is my condition is wrong in linking VBRK to BRF logical database.please guide me how to solve this.
If my joining is wrong means why i didnt get error in SQ02.??
Required fields are:Invoice number(vbrk),invoice category(vbrk),invoice date(vbrk),account document number(bkpf),company code(bkpf),G/L account(bseg),currency(bseg),state(kna1),invoice amount(vbrk).
Do i picked fields from wrong tables?/
Thanks&Regards,
narasimha.

can somebody help on this
Regards,
narasimha

Error while creating query

Hi ,
I am creating 7.1 laptop application, I am getting error while creating the queries. I have 2 queries in my Model DC, When I create the 1st query I am able to use it in the applicationDC without any problem, But when I am creating the second query, I am getting exception "Caused by: com.sap.tc.mobile.exception.standard.SAPIllegalArgumentException: Cannot find class com.acc.iss.issdatamodel.GetAccountDetails" . At design time in the application, I dont face any problem and I am able to build the application also. But during runtime at applicaiton la the error starts coming. In my 2nd query I have an input attribute and output based out on this input attribute.
The detailled error trace is below
ping="true" text="com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exception was thrown in preprocessing phase of application session ApplicationSession(name=com.acc.iss.issapp.iss.ISS, id=A957F1DFFD3B8DC70000012917EA1114). The causing exception is nested. RID=3f9de732730811dfad7b005056b36f88
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doPreprocessing(ClientSession.java:652)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:222)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:233)
     at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.WebDynproRequestHandler.handleRequest0(WebDynproRequestHandler.java:189)
     at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.WebDynproRequestHandler.handleRequest(WebDynproRequestHandler.java:127)
     at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.AbstractRequestHandler.handleRequest(AbstractRequestHandler.java:306)
     at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.SimpleHttpServer.handleRequest0(SimpleHttpServer.java:247)
     at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.SimpleHttpServer.handleRequest(SimpleHttpServer.java:215)
     at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.SimpleHttpServer.run(SimpleHttpServer.java:164)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for component com.acc.iss.issapp.iss.comp.ISSComp. (Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)
     at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:98)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:78)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:381)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:489)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doPreprocessing(ClientApplication.java:1236)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoPreprocessing(AbstractExecutionContextDispatcher.java:150)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoPreprocessing(ExecutionContextDispatcher.java:75)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:75)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:643)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:663)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doPreprocessing(ApplicationSession.java:268)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doPreprocessing(ClientSession.java:649)
     ... 9 more
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:71)
     ... 20 more
Caused by: java.lang.ExceptionInInitializerError
     at com.acc.iss.issdatamodel.ISSDataModel.createGetAccountDetails(ISSDataModel.java:57)
     at com.acc.iss.issapp.iss.comp.ISSComp.<init>(ISSComp.java:517)
     at com.acc.iss.issapp.iss.comp.wdp.InternalISSComp.<init>(InternalISSComp.java:685)
     ... 25 more
Caused by: com.sap.tc.mobile.exception.standard.SAPIllegalArgumentException: Cannot find class com.acc.iss.issdatamodel.GetAccountDetails
     at com.sap.tc.mobile.cfs.meta.io.MetaRuntimeUtils.findClass(MetaRuntimeUtils.java:229)
     at com.sap.tc.mobile.cfs.meta.io.MetaRuntimeUtils.findClass(MetaRuntimeUtils.java:204)
     at com.acc.iss.issdatamodel.GetAccountDetails.<clinit>(GetAccountDetails.java:45)
     ... 28 more
Regards,
Priya

Hi Priya,
I also have this error. In fact every time I do a change in my model DC, it is not reflected in my other DC which depends on this one. Rebuild, reload, .. nothing helps...
Did you eventually found the problem? Reinstalling the client solves the problem, but as you can imagine, that's not a helpful trick.
regards
Peter

Characteristic infoprovider not available while creating query

Hi All,
I have a characteristic infoprovider(user defined) in both Dev and Prod(transported-same properties), i can create new query in dev using query designer(BI 7) but not in production.
It is defined as infoprovider in the business expl tab of info object.
Query designer
when I search for this infoprovider in prod - No records found.
I checked thru info area still not able to see in query designer- production, it is not authorization relevant also.
Please let me know any possible scenarios.
Thanks
Jagadeesh

Hi,
I hope you are choosing 'create query' after opeing query designer and not 'open query'. If you select 'open query' then it shows only those info-areas and info-providers on which query is already there.
If this is not the case, can you see your characteristic in the info-provider tab?
Regards,
Akshay

Error While creating User using userservcenter Webservice

Hi All,
I have generated the java client stub from the um_workflowSaveCreateProfile.wsdl file successfully and I have developed one client code to call the web service to create user in Oracle Internet Directory.
I am invoking one workflow for creation of the user which accepts four attributes (sn, cn, uid, userPassword),it is working fine when sn, cn, uid attributes are mandatory only, but if I make userPassord as mandatory, it is showing me error : Not all of the required parameters for this operation were specified.
I am using the below client Code to call the service:
package com.example;
import java.util.Properties;
import org.apache.axis.AxisFault;
import com.oblix.CreateUser.*;
public class CreateUserClient {
public static void main(String Args[]) throws AxisFault{
try{
OblixIDXML_um_workflowSaveCreateProfile_ServiceLocator loc = new OblixIDXML_um_workflowSaveCreateProfile_ServiceLocator();
OblixIDXMLPortType port = loc.getOblixIDXML_um_workflowSaveCreateProfile_Port();
Authentication myauth = new Authentication();
myauth.setLogin("orcladmin");
myauth.setPassword("1111Aaaa");
Request myrequest = new Request();
myrequest.setFunction("workflowSaveCreateProfile");
myrequest.setApplication("userservcenter");
myrequest.setVersion("NPWSDL1.0");
RequestParams myparams = new RequestParams();
myparams.setObDomainName("dc=ad,dc=company,dc=com");
//myparams.setObWorkflowName("obworkflowid=wfqs20090206T1424241321438,obcontainerId=workflowDefinitions,o=Oblix,dc=ad,dc=company,dc=com");
myparams.setObWorkflowName("obworkflowid=wfqs20090206T170318571544,obcontainerId=workflowDefinitions,o=Oblix,dc=ad,dc=company,dc=com");
java.math.BigInteger myint2 = new java.math.BigInteger("4");
myparams.setNoOfFields(myint2);
AttributeParams attributeParams = new AttributeParams();
GenericAttribute []genericAttribute = new GenericAttribute[10];
GenericAttribute mygenericattr = new GenericAttribute();
mygenericattr.setAttrName("cn");
mygenericattr.setAttrOperation("ADD");
String[] cn = {"Akshay"};
mygenericattr.setAttrNewValue(cn);
genericAttribute[0] = mygenericattr;
GenericAttribute mygenericattr1 = new GenericAttribute();
mygenericattr1.setAttrName("sn");
mygenericattr1.setAttrOperation("ADD");
String[] sn = {"koul"};
mygenericattr1.setAttrNewValue(sn);
genericAttribute[1] = mygenericattr1;
GenericAttribute mygenericattr3 = new GenericAttribute();
mygenericattr3.setAttrName("uid");
mygenericattr3.setAttrOperation("ADD");
String[] uid = {"akshay_koul"};
mygenericattr3.setAttrNewValue(uid);
genericAttribute[2] = mygenericattr3;
PasswordAttribute []pwdatrarr= new PasswordAttribute[1];
PasswordAttribute pwdatr= new PasswordAttribute();
pwdatr.setAttrName("userPassword");
pwdatr.setAttrOperation("ADD");
pwdatr.setAttrNewValue("abcd1234");
pwdatr.setAttrConfirmValue("abcd1234");
pwdatrarr[0] = pwdatr;
System.out.println("the pwd is"+pwdatrarr.toString());
attributeParams.setGenericAttribute(genericAttribute);
attributeParams.setPasswordAttribute(pwdatrarr);
myparams.setAttributeParams(attributeParams);
myrequest.setParams(myparams);
Oblix output = port.oblixIDXML_um_workflowSaveCreateProfile(myauth, myrequest);
System.out.println("result of the request\n");
System.out.println();
//System.out.println("test:"+output.getObError().getObStatus());
// System.out.println("test1:"+output.getObError().getObRequestInfo());
System.out.println("test2:"+output.getObError().getObTextMessage()[0].toString());
System.out.println("test2:"+output.getObError().getObTextMessage()[0]);
System.out.println("test3:"+output.getObError().getObTextMessage(0));
System.out.println("status is " + output.getObStatus());
}catch(Exception e){
System.out.println("the exception is:"+e.getMessage());
e.printStackTrace();
Please suggest me where i am wrong !!!
Thanks in Advance
Akshay

Hi,
I guess, create workflow does not accept the password attribute while creating user account.
You have to create the account using createprofile web service then update the password using changeprofile web service.
I think this limitation is strategic, if you have password policies enabled, policies are applied to the container of the accounts.
So OAM needs to have the DN of the user account to check if there are any password policies associated with the container during password updates,
which might not be possible while using createProfile web service.
- Sandeep

Error while creating rules for Event generator

Hi,
I followed the PO samples in dev2dev site to create an EventGenerator(both file and JMS) from a jython script. While creating rules for the eventgenerator, am getting the following exception.
"AttributeError: 'None' object has no attribute 'newFileEventGenConfigurationMBean'"
here is the PO sample code,
egCfgMBean = getMBean("FileEventGenerators/FileEventGenerators")
egMBean = egCfgMBean.newFileEventGenConfigurationMBean(egName)
I used getMBean() instead of wlst.getTarget() to retrieve the MBean info.
The server is weblogic 9.2 and domain is Integration domain. Looks like the getMBean() wasnt able to locate the Eventgenerator MBean for some reason and hence the variable 'egCfgMBean ' is always null. Anyone had this issue before.
Thanks.

It looks like getMBean("FileEventGenerators/FileEventGenerators") is not
returning an MBean. "None" is returned if no MBean is found. Check the path
parameter to getMBean() and make sure it is correct. If you know the object
name of the MBean you are interested in, you may be able to use the
getPath() command to get its path.
wls:/mydomain/serverConfig>path=getPath('com.bea:Name=myserver,Type=Server')
wls:/mydomain/serverConfig> print path
<Ramesh R> wrote in message news:[email protected]..
Hi,
I followed the PO samples in dev2dev site to create an EventGenerator(both
file and JMS) from a jython script. While creating rules for the
eventgenerator, am getting the following exception.
"AttributeError: 'None' object has no attribute
'newFileEventGenConfigurationMBean'"
here is the PO sample code,
egCfgMBean = getMBean("FileEventGenerators/FileEventGenerators")
egMBean = egCfgMBean.newFileEventGenConfigurationMBean(egName)
I used getMBean() instead of wlst.getTarget() to retrieve the MBean info.
The server is weblogic 9.2 and domain is Integration domain. Looks like the
getMBean() wasnt able to locate the Eventgenerator MBean for some reason and
hence the variable 'egCfgMBean ' is always null. Anyone had this issue
before.
Thanks.

Error while creating Resource using GDS

Hi
Iam trying to create Resource using GDS and it is throwing me error
clresource: (C189917) VALIDATE on resource egateq00-haegate_reg-res, resource group egateq00-rg, exited with non-zero exit status.
clresource: (C720144) Validation of resource egateq00-haegate_reg-res in resource group egateq00-rg on node uhegateq02 failed.
clresource: (C891200) Failed to create resource "egateq00-haegate_reg-res".
This is the command I executed
rclresource create -g egateq00-rg -t SUNW.gds
-p Scalable=false -p Start_timeout=120 -p Stop_timeout=120 -p Probe_timeout=30
-p Port_list="23001/tcp" -p Start_command="/egateq00/scripts/reg_START.sh" -p Stop_command="/egateq00/scripts/reg_STOP.sh"
-p Probe_command="/egateq00/scripts/reg_PROBE.sh" -p Child_mon_level=1 -p Network_resources_used=egateq00-lh-res -p Failover_enabled=FALSE
-p Stop_signal=15 egateq00-haegate_reg-res
The log under /var/cluster/logs/DS says following
07/01/2008 17:56:43 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 17:56:43 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
07/01/2008 18:13:23 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 18:13:23 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
However, I can open these scripts and run it from anywhere. I also tested these scripts and they all work fine. They are all set to chmod 777 , so everyone should have execute permission
Iam not returning any return value from these Start and Stop script , is that the why it is failing
thanks

Hi
I disabled the PMF as described on the http://blogs.sun.com/TF/entry/disabling_pmf_action_script_with. This is what I did
1>Added following line in the top of my Start script
while getopts 'R:G:' opt
do
case "${opt}" in
R) RESOURCE=${OPTARG};;
G) RESOURCEGROUP=${OPTARG};;
esac
done
sleep 60 &
/usr/cluster/bin/pmfadm -s ${RESOURCEGROUP},${RESOURCE},0.svc
2>While creating the resource , I used property for Start_command="/egateq00/scripts/reg_START.sh -R %RS_NAME -G %RG_NAME"
Now , after doing this , My RG is not getting lost. Also , in the message file I do not see the errors of "Start script failed to stay UP"
However, My Application is not started either.
This is what the message file says
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_validate> completed successfully for resource <egateq00-haegat
e-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
Jul 3 16:43:32 uhegateq01 Cluster.CCR: [ID 973933 daemon.notice] resource egateq00-haegate-reg-res added.
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_svc_start> for resource <egateq00-haegate-reg-res>,
resource group <egateq00-rg>, node <uhegateq01>, timeout <120> seconds
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_svc_star
t>:tag=<egateq00-rg.egateq00-haegate-reg-res.0>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, .
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_svc_start> completed successfully for resource <egateq00-haega
te-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 2% of timeout <120 seconds>
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_monitor_start> for resource <egateq00-haegate-reg-re
s>, resource group <egateq00-rg>, node <uhegateq01>, timeout <300> seconds
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_monitor_
start>:tag=<egateq00-rg.egateq00-haegate-reg-res.7>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1
, ...)Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_monitor_start> completed successfully for resource <egateq00-h
aegate-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
4>Also , in the /var/cluster/logs/DS , I see the Start script started succesfully
07/03/2008 16:43:32 uhegateq01 START-INFO> Start succeeded. [egateq00/scripts/reg_START.sh -R egateq00-haegate-reg-res -G egateq00-rg]
5>Also , in the /var/cluster/logs/DS , I see the Probe script returning 0 , but this is wierd because it should return Non zero number. When I run the Probe script from the command line , it is returning me non zero value when the application is down
07/03/2008 16:43:35 uhegateq01 PROBE-INFO> The GDS monitor (gds_probe) has been started
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> The probe result is 0

Error while creating Routing using LSMW

Hi Guys ,
I am trying to create LSMW using Direct Input Method .
My structures are ::
RC271_DS Work center structure for direct input (for datasets)
RC27M_DS Material master view DIRECT INPUT routing for datasets
PLKO_DI_DS Header structure for direct input (for datasets)
PLPO_DI_DS Routing/item structure for direct input (for datasets.
I getting correct data from multiple flat files .
It's converting the data also .
But while executing start direct input method i am getting the followig error ....
You cannot edit the task list object with activity type
Please let me know problem guys .
Regards,
Raj

Hi Naveen,
It means you have to assign the task list type to material type ZPRD. Then it will carry its job:
The path is:
Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
I hope it will work.
Regards,
Madhu.G

$ expression while creating Query using Query generator

Similar Messages

Maybe you are looking for