Problem creating basic views while creating materials using idocs?
hello,
I am facing an issue while creating materials using idocs. The problem is that the basic view does not get created whereas other views are present. The function module used is idoc_input_matma01 and the basic idoc type is MATMAS03.
Looking for help. Thank you
Hi Madhu,
Actually i recieve an idoc from PI containing data required for cretion of the material via an idoc. This idoc is then processed to create the required material.
The material gets created with appropiate data in various tables(mara, makt) but when we view material in mm03 we cant see the basic data views.
Similar Messages
-
Requesting all to help me how to create lsmw using idoc method
hi
thanx for ur answer
requesting every body in the forum to help me how to create lsmw using idoc method.
regards,
balajiHi Balaji,
LSMW using IDOC is similar to using flat file method. Here you are getting data from IDOC container and mapping data with Idoc segments insted of flatfile column.
Hope this is what you are looking for. If helpful then dont forget to reward me for that
Darshan -
Problem creating TO using Function Module L_TO_CREATE_DN
Hi Gurus,
I am trying to create TO using the Function Module L_TO_CREATE_DN. Its creating TO for deliveries for materials which are not batch split, however when I am taking delivery consisting of Batch Split material, its not creating and throwing a error with sy-subrc = 15. The error which I am experiencing is Item not handled in batches and batch split item cannot be edited. How to overcome this issue and create the TO.
Regards,
Avik
Edited by: avik2005uitbu on Dec 15, 2011 8:10 PMHi,
Please check the WM config for the Warehouse / Movement type(Tx. OMLX) . There we have option to give as immediate confirmation. This may be the reason for TO getting confirmed when created.
U can this by creating a transfer order for the same movement type manually in TX. LT03. After you save if the To is confirmed then its a config setup @ Warehouse / Movement type.
Regards,
Bhargava -
Problem creating jar using JDeveloper
I'm creating jar using JDeveloper..I need to keep two dll files in the jar. But if I create the jar in JDeveloper, it can't include the dll files. If the jar is created from command prompt, it can include the dll files. Can anyone tell me how can I include these dlls in my jar?
Putting DLLs in your classes directory is dangerous (eg. Run->Clean Project.jpr will remove it). I use a different way to achieve that:
When you double click on the deployment profile you'll see a dialog window containing a list of items. The one of interest is the one called File Groups. Select this item, click on the New button and add a new file group just for your DLLs.
--olaf -
How to resolve error while importing data using IDoc method in LSMW ?
Hi
I am trying to import my data using IDoc method in LSMW.
But after completing the whole LSMW process, when I look into the IDOC generated, the error description is as this.
It talks about the process code and other stuff.
Function module not allowed : APPL_IDOC_INPUTI
Message No. B1252
Diagnosis :
The function module APPL_IDOC_INPUTI and the application object type which were determined are not valid for this IDoc.
I am not able to resolve the problem.
Please help.
Regards,
Rachesh Nambiarcheck the below link.
/people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter -
Problem creating dataset using db2 stored procedure in Eclipse BIRT
Hi,
I am using DB2 9.7 Express Edition in Eclipse BIRT(version 2.5.1) for generating reports. I have used Type4 driver for jdbc connection.
For that, I have established jdbc connection using db2jcc.jar and db2jcc_license_cu.jar files.
I have successfully created data source, say DB2BIRT having following requisites-
Driver Class - com.ibm.db2.jcc.DB2Driver ( v3.50)
Driver URL - jdbc:db2://localhost:50000/database_name
User name - user_name
Password - Password
I have written some stored procedures and trying to use resultsets from those stored procedures into my report..
The stored procedures having involvement of only single resultset are working absolutely fine for new dataset using above DB2BIRT.
But, I am unable to create new dataset using stored procedures those having involvement of multiple resultsets.
I am getting following error as -
org.eclipse.birt.data.engine.odaconsumer.PreparedStatement$SequentialResultSetHandler getMoreResults
SEVERE: Cannot get more result sets from the statement.
Cannot get the result set.
SQL error #1: [jcc][10120][10943][3.50.152] Invalid operation: statement is closed. ERRORCODE=-4470, SQLSTATE=null
org.eclipse.birt.report.data.oda.jdbc.JDBCException: Cannot get the result set.
SQL error #1: [jcc][10120][10943][3.50.152] Invalid operation: statement is closed. ERRORCODE=-4470, SQLSTATE=null
com.ibm.db2.jcc.b.SqlException: [jcc][10120][10943][3.50.152] Invalid operation: statement is closed. ERRORCODE=-4470, SQLSTATE=null
at org.eclipse.birt.report.data.oda.jdbc.CallStatement.getMoreResults(CallStatement.java:1760)
at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaAdvancedQuery.getMoreResults(OdaAdvancedQuery.java:214)
at org.eclipse.birt.data.engine.odaconsumer.PreparedStatement$SequentialResultSetHandler.getMoreResults(PreparedStatement.java:5183)
at org.eclipse.birt.data.engine.odaconsumer.PreparedStatement.getMoreResults(PreparedStatement.java:792)
at org.eclipse.birt.data.engine.odaconsumer.PreparedStatement.flushResultSets(PreparedStatement.java:1009)
at org.eclipse.birt.data.engine.odaconsumer.PreparedStatement.close(PreparedStatement.java:980)
at org.eclipse.birt.data.engine.executor.DataSource$DataSourceReleaser.run(DataSource.java:374)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.ibm.db2.jcc.b.SqlException: [jcc][10120][10943][3.50.152] Invalid operation: statement is closed. ERRORCODE=-4470, SQLSTATE=null
at com.ibm.db2.jcc.b.wc.a(wc.java:55)
at com.ibm.db2.jcc.b.wc.a(wc.java:102)
at com.ibm.db2.jcc.b.tk.db(tk.java:3118)
at com.ibm.db2.jcc.b.tk.a(tk.java:1063)
at com.ibm.db2.jcc.b.tk.getMoreResults(tk.java:908)
at org.eclipse.birt.report.data.oda.jdbc.CallStatement.getMoreResults(CallStatement.java:1756)
... 7 more
Moreover, I tried to resolve above issue by changing Driver Class from com.ibm.db2.jcc.DB2Driver ( v3.50) to com.ibm.db2.jcc.uw.DB2StoredProcDriver ( v3.50)
So again while *"Test Connection"* for new Data source using this new driver class for stored procedure, there is an error reflection as -
org.eclipse.birt.report.data.oda.jdbc.JDBCException: The selected driver cannot parse the given url.
at org.eclipse.birt.report.data.oda.jdbc.JDBCDriverManager.testConnection(JDBCDriverManager.java:627)
at org.eclipse.birt.report.data.oda.jdbc.ui.util.DriverLoader.testConnection(DriverLoader.java:120)
at org.eclipse.birt.report.data.oda.jdbc.ui.util.DriverLoader.testConnection(DriverLoader.java:133)
at org.eclipse.birt.report.data.oda.jdbc.ui.profile.JDBCSelectionPageHelper.testConnection(JDBCSelectionPageHelper.java:653)
at org.eclipse.birt.report.data.oda.jdbc.ui.profile.JDBCSelectionPageHelper.access$7(JDBCSelectionPageHelper.java:627)
at org.eclipse.birt.report.data.oda.jdbc.ui.profile.JDBCSelectionPageHelper$7.widgetSelected(JDBCSelectionPageHelper.java:549)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:228)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1176)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3493)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3112)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at org.eclipse.birt.report.designer.ui.dialogs.BaseDialog.open(BaseDialog.java:110)
at org.eclipse.birt.report.designer.data.ui.actions.EditDataSourceAction.doAction(EditDataSourceAction.java:68)
at org.eclipse.birt.report.designer.internal.ui.views.actions.AbstractElementAction.run(AbstractElementAction.java:70)
at org.eclipse.jface.action.Action.runWithEvent(Action.java:498)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1176)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3493)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3112)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Can anybody address my this issue for successful implementation of stored procedure(with involvement of multiple resultsets) for creating Data set in Eclipse BIRT ?
I will be really thankful.
Thanks in advance,
ManasiWell, in my stored procedure I have used 2 to3 cursors(as per my business logic) and all cursors except one are holding result sets. That exceptional cursor is intended for holding as well as returning result set after call to the procedure. And its perfectly running on db2 and returning the desired output. The problem is with Eclipse. The same procedure is not working in Eclipse BIRT.
-
Problem creating CalculationView using Eclipse on MacOSX
Hi guys,
I'm trying to follow the steps of tutorial Using HANA Modeler in SAP HANA Cloud Platform, but it's giving a error when creating the Join of SO_CV view when running on MacOS Leopard. When I link the tables SNWD_BPA and SNWD_SO the link is erased and when I try using the Join wizard I cannot click on finish or Add a column as output.
But when I do the same steps on Windows it's works without problem. I've done the procedure several times in both systems, and only get error on MacOS.
Anyone else having this issue ?
Regards,
Cleber SantzHi Vladimir,
I already have a updated Eclipse (Kepler) install:
UI5: 1.20.7
HANA Tools: 1.0.7400
HANA Cloud Tools: 1.27.0
NEO J2EE 6 SDK: 2.34.6.1
When the problem occurs, it cause a graphic issues as well on View Diagram. See image attached.
Regards,
Cleber Santz -
Problem to create shipment using idoc
Hi,
I am having a problem on EDI-IDOCS to create inbound shipment.
I am using the message type SHIPPL.
IDOC - TPSSHT01
Process code-SHIP.
And I am using the function module IDOC_INPUT_SHIPPL to process the idoc.
After processing the idoc i am getting the error message - shipment has not saved( 51).
Also i am getting the error message - Transportation planning point has no partner for transportatn. plan.
I couldnt figure out what the error would be.
If possible can you please help me regarding this problem.
Thanks in advance.Hi Goutham,
This is an error due to either the data or missing config. This error message is issued when the system cannot find an entry in table TTDS. Check your data and the config and make correction accordingly.
In config it is under
Logistics Execution> Transportation> Interfaces> External Trabnsportation Planning Systems> Maintain Transportation Planning Point for External Systems
or if you don't have external planning system, you will find the corresponding config under
Enterprise Structure> Logistics Execution> Maintain Transportation Planning Point.
Your message is more related to external transportation planning point which is in the first config option above.
If you don't have external transportatio planning, then your choice of the EDI components is wrong. Look in the code of this function module where this message is generated, you will understand.
Srinivas -
E-Recruit - Problem creating candidates using RCF_CREATE_USER
When I try to create candidates for e-recruitment in se38 using the program RCF_CREATE_USER I get an error message that says "Enter at least one number for the business partner".
But if I try to run the program again for the same user then it says that "A candidate already exists for the user". However if I check in su01, no reference user has been addded to the user roles.
Can anyone suggest why this isn't working.Hello,
We never had any issue while using this program 'RCF_CREATE_USER' though our recruit is still not working because of some other issues. We do get this error '"A candidate already exists for the user" whenever we try to repeat a username. If you use a username in this program which you never have used it before, you wont get this message. Try creating a new user in SU01 and then use in this program. You wont get this message. Normally we assume that a user is created even if you get some error after running the program. This is just my assumption. It seems E-recruiting model is very very complex!!
Let me know if you need any docs on Customizing the IMG for E-recruiting.
Regards,
Ahmad
Message was edited by: Ahmad Quraishi -
Problem creating documents using BAPI_DOCUMENT_CREATE2
Dear all,
I am using
BAPI_DOCUMENT_CREATE2
to create a quality document attachment ( PDF file) for one of our dynpro screen..
then I retrive the document information using 'BAPI_DOCUMENT_CHECKOUTVIEW2
and show the document using function module
CV120_START_APPLICATION
1) it works fine only for the person who is creating the document as the bapi is creating a reference to his directory path.
2) it doesnt work if the user is moving the file into another directory on his local computer as the directory reference path is gone..
3) if a different user is trying to acess file it doesnt even show up as he will never have the direcory path created by some body else.
how to over come this situation.
I have done lot of investigation and I found that 'BAPI_DOCUMENT_CHECKOUTVIEW2 has some paraneters
pf_http_dest = 'SAPHTTPA'
pf_ftp_dest = 'SAPFTPA'
but could not able to understand it properly. Please kindly help..
Thank you very much in Advance.
Regards
syam.
Edited by: syambabu g on Oct 22, 2008 1:39 PM
Edited by: syambabu g on Oct 22, 2008 1:47 PM
Edited by: syambabu g on Oct 22, 2008 1:50 PMPlease refer to this thread, it tells why you need a data carrier you can also configure the same in DC20.
Data Carriers for Storage the Originals of DMS -
Problem Creating Portles Using JAVABEANS
I have an application that uses JSP and JavaBeans that works perfectly outside of a portlet. When implementing it as a portlet it is unable to find the JavaBeans.
I have stored the JavaBeans in the default /WEB-INF/classes directory. The JSP files are in their own directory.
Request URI:/jnetjsp/adminusersearch/AdminUserSearch.jsp
Exception:
oracle.jsp.parse.JspParseException: Line # 28, Error: Unable to find class for bean: UserResults defined by tag with class: adminusersearch.UserSearchResults
9iAS 1.0.2.2.0You need to make sure that your JavaBean classes are on the classpath. Not sure why you mention the WEB-INF directory, it doesn't exist under JServ.
As far as I remember you need to edit the wrapper.classpath entry in the jserv.properties file. For example, if you have your beans in a the mybeans.jar file, you'd need to create an entry like this:
wrapper.classpath=D:\jpdk\lib\mybeans.jarand copy mybeans.jar to the D:\jpdk\lib folder.
Hope this helps. -
Problem creating a 'used sources' list based on EXIF data in InDesign CS5
Hello everyone,
I recently started to use InDesign CS5 to work on school projects. These projects regularly require us to have a list of sources, not only for citations and referenced work, but also for images. As I sometimes make quite long documents, keeping track of what image is where, and where I got it from, gets tedious.
I had the idea of generating a caption based on EXIF data, which I'd move to the pasteboard, and group it with the image. The text in the caption has a seperate, numbered paragraph style. On one of the last pages, I generate a table of contents, which the numbered paragraph style selected. I chose to display it using another paragraph style, without page numbers.
What I want to have as the end result is:
Table of contents
1. <Title>. <Author> (<Creation Date>). Retrieved <Date Placed> through <Description>
The captions display correctly, as shown above in the body of the table of contents. The table of contents itself however, shows only the numbering in front of it, and not the variables.
I already tried converting the live captions to static captions, but that doesn't work. Does anyone have an idea how to solve this?Hello everyone,
I recently started to use InDesign CS5 to work on school projects. These projects regularly require us to have a list of sources, not only for citations and referenced work, but also for images. As I sometimes make quite long documents, keeping track of what image is where, and where I got it from, gets tedious.
I had the idea of generating a caption based on EXIF data, which I'd move to the pasteboard, and group it with the image. The text in the caption has a seperate, numbered paragraph style. On one of the last pages, I generate a table of contents, which the numbered paragraph style selected. I chose to display it using another paragraph style, without page numbers.
What I want to have as the end result is:
Table of contents
1. <Title>. <Author> (<Creation Date>). Retrieved <Date Placed> through <Description>
The captions display correctly, as shown above in the body of the table of contents. The table of contents itself however, shows only the numbering in front of it, and not the variables.
I already tried converting the live captions to static captions, but that doesn't work. Does anyone have an idea how to solve this? -
Problem with Polish Characters while downloading data using GUI_DOWLOAD
Hi,
I was trying to create a file on the presentation server using GUI_DOWLOAD.
I am facing a problem with the data that contains polish characters.. like Ą , Ł..
There is a vendor numer in the system as FRĄCZEK, when i was tring to download, the vendor number is downloaded as FR¥CZEK, even i tried to download from SE16 also, still i am facing the same problem.
I am facing the above problem with soem other polish characters..
Is there any solution to download the data properly.. ?
Guys please help me.
Thanks in advacnce.
Regards,
Sriram.
Edited by: Srirama Murthy Maddirala on Oct 27, 2009 8:10 AMHi Sriram,
<li>Get the front-end code page using NLS_GET_FRONTEND_CP.
<li>Pass the code page through GUI_DOWNLOAD.
REPORT ztest.
TYPE-POOLS:abap.
DATA:frontend_codepage TYPE cpcodepage.
DATA:codepage TYPE abap_encoding.
"Get the Frontend Code page
CALL FUNCTION 'NLS_GET_FRONTEND_CP'
EXPORTING
langu = sy-langu
IMPORTING
frontend_codepage = frontend_codepage.
"Pass the codepage through GUI_DOWNLOAD function module
codepage = frontend_codepage.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\temp\data.xls'
filetype = 'ASC'
codepage = codepage
TABLES
data_tab = it_data.
Thanks
Venkat.O -
Create PO using Idoc with free goods
Hi guys,
i'am currently working on a projekt i need to create a purchase order containing free goods.
We've already tested the PORDCR/PORDCR1 message and Idoc types PORDCR101/102 with BAPI's
IDOC_INPUT_PORDCR1 - w/ self-defined process code (via we42)
BAPI_IDOC_INPUT1 - w/ standard process code (BAPI)
Nothing worked. Got lots of errors in we05 transaction (mostly status 51)
Important:
We need to give the Idoc the free gods flag so we didnt need to set the net_price.
Thanks for your help guys,
DanielUse Order PORDCR102, with your extension say ZPORDCR102.
Create one control table and assign Function module to that table.
Set this new Ztable with all required data like free goods.
Then create new idoc, this new idoc will take message PORDCR102 and extension will pick new table and add free goods flag while creating PO.
Hope this helps -
Hi Support,
When we have opened that URL http://www.internationalrail.com/pdfservice/lbqujn.pdf in mozila 34.0.5 then we are not able to see logo/image in that pdf link on top left corner, but when that file download in our local system then we are getting pdf logo.
So please let me know what is the problem.
Thanks
SanjayFor more detail please see attached screen
Maybe you are looking for
-
How to Call Standardapplication in Custom Applications in SRM-ABAP ?
Hi, I want to Create a Custom Apllication in SRM 5.0 & i have to call a Standard Application. I am new to SRM ABAP , can anyone help me how to Create Applications in SRM ABAP & How to Call Standard Application in SRM ABAP.
-
How to get swoosh sound when mail gets sent
How to get the swoosh sound back when mail gets sent?
-
Unable to install Mozilla 8.0.1 - Windows says "This file is corrupted."
Like the title says, my PC was unable to install Mozilla 8..0.1. Windows mentioned that the file is corrupted no matter how many times I download Mozilla.
-
HI, does the mac pro come with an internal mic? Ichat audio doesn't work for me -Malena
-
Pass values of a screen-field to another screen's field.
Hello everyone, Its urgent. My requirement is as follows. When I execute the QM02 transaction and enter a notification number, it takes me to the change notification screen (screen no: 7200) Here, I was supposed to add a button in the application too