Extending af:convertDateTime (and binding property)

Hello,
I have an <af:convertDateTime> in the page:
<af:inputDate id="IDATE" value="#{row.bindings.Date.inputValue}">
<af:convertDateTime pattern="#{bindings.TABLE.hints.Date.format}"/>
</af:inputDate>I want to customize the converter, but there is no "binding" property as with other components.
From our tests, the method "format" in the bean pointed by "pattern" seems to return a null String.
By googling we discovered that the class behind the converter is oracle.adf.rich.DateTime.
My question are:
1. Is it true that, in the case of a null String returned by "format", the converter acts internally by checking the current locale and providing a coherent format for the locale?
2. Why is not oracle.adf.rich.DateTime availble publicly and why is there no binding property?
3. What is the best approach to extend the converter?
Thanks.

Thanks for your answer, but I'll try to be more precise about my problem.
What we would really like to know is how that af:convertDateTime works internally and extend it's behaviour by custom providing a bean to "pattern" which behaves the following way, depending on the situation:
1. either return the same pattern String the converter would use internally by default
2. or return a custom String
but again, why isn't oracle.adf.rich.Date available?

Similar Messages

Regarding Value and Binding properties of af:inputTextBox

Hi All,
I am using JDeveloper 11.1.1.6.0. I want to set the value for af:inputTextBox from the backing bean.
I observed there are two properties for this component, 'Value' and 'binding'.
So, I thought of using 'Value' property. For this I created a property in my backing bean.
Number textBoxValue; //Setter and getter methods for this ( I want to display numbers ans persist the same thats whay i have given as Number)
and in one of my methods I had given,
textBoxValue = new Number(12);
I am able to display the value in the UI
Here goes my queries, please clarify these.
1) What is the need of these two properties?
2) How can set value using the 'Binding' Property.
3) Can I set value to the input using both properties?
4) If 2nd point is correct then what will happen, if I set two different values to the textbox using these two components.
Thanks & Regards,
Ravi.

1) Binding is uses as an EL reference that will store the component instance on a bean. This can be used to give programmatic access to a component from a backing bean, or to move creation of the component to a backing bean.
Value represents the value of the component. If the EL binding for the "value" points to a bean property with a getter but no setter, and this is an editable component, the component will be rendered in read-only mode.
So they are different.
2) You don't
3) You don't
4) as 2) in not correct this is not relevant
If you want to set the value of a ui component from inside a bean you have different possible solutions. Lets assume you have a binding for The component to bean. In case of a input text the bean property would be of type RichInputText. Lets the property name be myIPT. Then you set the value as myIPT.setValue("YOUR VALUE"); (if the component shows text).
If you have bound the value property of the component to a bean attribute (using EL) you only need the change the bean attribute.
If the value is bound to a value binding (e.g. one that was generated by dragging a VO onto the page and dropping it as form), you get the the value binding by
// GET A METHOD FROM PAGEDEF AND EXECUTE IT
// get the binding container
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
// get an ADF attributevalue from the ADF page definitions
AttributeBinding attr = (AttributeBinding)bindings.getControlBinding("NAME_OF_THE_ATTRIBUT");
attr.setInputValue("test");Timo

Preview Mode and conflicting property values

In this design mode, the red boxes have a border-weight: 0, border-color: none; background opacity: 47%. Gray boxes: border-weight: 1; border-color: none; background-opacity: 27%.
In the preview mode, the gray boxes will show the border-weight that is set (by default) to one even though I specified the border-color as 'none'. The gray boxes will also cause content to shift downards.
Using all red boxes in the design mode with both boder-weight: 0 and border-color: none.
No problems whatsoever in the preview mode.
So my point is, there seems to be an issue with declaring a value in the border-weight property and then setting the value of the border-color property to none.

Hi
You can do that in two ways.
One is from PA services provided by SAP. Other one is you care create a Generic service to load the values.
1. In HRASR_DT tcode select the process and create the backend service for SAP_PA and add the field Employee group (PERSG ) by choosing IT 0001 and screen element then select the Input Help and check the box for PA service .
2. Create a backend service and create the BADI and inside that do the logic to load the Employee group from FM and bind the value to the field.
Please refer the Enhancement Implementation HRASR00_USER_NAME for the sample. Class CL_HRASR00_GS_USER_NAME.
see this link
http://help.sap.com/saphelp_erp2005/helpdata/en/82/b6b94278560c31e10000000a1550b0/frameset.htm
Kind Regards,
Mukesh

Move elements in layout and bind the elements?

Hi experts, I have sereval questions.
1. In a view, I drag & drop a group to the layout and drap sereval elements on the group. But I can't move the elements to the next line. They were just arranged one after one and line after line. How can I move them as I want?
2. Does it exist a "table" element for the layout? Where is it?
3. Does it exist a "date select" button for the layout which allows me to see a calendar and select a date on clicking it? Where is it.
4. I've mapped and binded the context of Component Controller to my Window context. But when I want to map & bind Window Context to View Context, all of the elements of context are gray that I can't bind them to the UI elements on the layout. That's why? How can I bind them?
Thank you a lot in advance!!!!!

Hi
1. In a view, I drag & drop a group to the layout and drap sereval elements on the group. But I can't move the elements to the next line. They were just arranged one after one and line after line. How can I move them as I want?
You have to use Layouts, you have GridLayout, FlowLayout, MatrixLayout and RowLayout
Layout property is there for Groups, Transparent Containers
2. Does it exist a "table" element for the layout? Where is it?
Table UI element is not for Layouts, you have to use the Layouts mentioned above
3. Does it exist a "date select" button for the layout which allows me to see a calendar and select a date on clicking it? Where is it.
Take an Input Field and bind it with a Cotnext Attribute which of type DATS or dataelement which is a date type, then you can see calender automatically
4. I've mapped and binded the context of Component Controller to my Window context. But when I want to map & bind Window Context to View Context, all of the elements of context are gray that I can't bind them to the UI elements on the layout. That's why? How can I bind them?
This should not happen, check this again
Abhi

Binding property of a Panel header in Declarative Component

Hi,
I created a Custom Declarative component, which has a panel header, i wanted to expose the binding property of the panel header so that the users can add partial triggers to it programaticaly,
so i added a attribute of type RichPanelHeader, and used it in bindings of the panel header, but i am getting following error,
Unserializable value:RichPanelHeader[UIXFacesBeanImpl, id=dc_cnt_ph1] for key:PropertyKey[phBinding] in console,
and the value in bean is null.
the code used in Panel Header of Declarative component,
<af:panelHeader text="#{attrs.phScreenHdrTxt}" id="dc_cnt_ph1"
                      helpTopicId="#{attrs.phScreenHdrHelpTopicId}"
                      rendered="#{attrs.phScreenHdrRendered}"
                      inlineStyle="#{attrs.phScreenHdrInlineStyle}"
                      partialTriggers="#{attrs.phScreenHdrPartialTrigger}"
                      binding="#{attrs.phBinding}">
      <attribute>
          <attribute-name>phBinding</attribute-name>
          <attribute-class>oracle.adf.view.rich.component.rich.layout.RichPanelHeader</attribute-class>
        </attribute>   code used in the consumer app.
<app:Container id="c2" phScreenHdrTxt="tab1" phBinding="#{TestBean.panelHeader}">
    <f:facet name="body">
      <af:group id="g1">
        <af:outputText value="Tab1" id="ot1"/>
        <af:commandButton text="Refresh Panel Header" id="cb1"
                          actionListener="#{TestBean.refreshPh}"/>
      </af:group>
    </f:facet>
</app:Container>
public class TestBean implements Serializable{
private RichPanelHeader panelHeader;
public void refreshPh(ActionEvent actionEvent) {
    panelHeader.setText("Changed");
    AdfFacesContext.getCurrentInstance().addPartialTarget(panelHeader);
public void setPanelHeader(RichPanelHeader panelHeader) {
    this.panelHeader = panelHeader;
public RichPanelHeader getPanelHeader() {
    return panelHeader;
}is there any solution or way to expose the binding property of any component in a custom declarative component?

Hi,
as a last resort, try javax.faces.component.UIComponent as the component class. It seems that none of the UI components implements serializable. javax.faces.component.UIComponent is the JSF base class that they all use.
Let me know if this works. If not, I think I have another option that mayl do
Frank

Can't use binding property of a commanButton inside a datatable

I have commandButtons inside a datatable.
The datatable is iterated over ArrayList containing custom PageSnippets objects, which look like this :
public class PageSnippet {
          private int index = 0;
          private String name = null;
          private String id      = null;
          private UICommand upBtn = new UICommand();
          private UICommand downBtn = new UICommand();
          public PageSnippet (int index, String name, long id, int snippetCount) {
               this.index = index;
               this.name = name;
               this.id = String.valueOf(id);
               setBtnsVisibility(snippetCount);
           * getters
          public String getId() {
               return id;
          public int getIndex() {
               return index;
          public String getName() {
               return name;
          public UICommand getUpBtn() {
               return upBtn;
          public UICommand getDownBtn() {
               return downBtn;
           * Sets button visibility.
          public void setBtnsVisibility (int snippetCount) {
               upBtn.setRendered(index > 1);
               downBtn.setRendered(index < snippetCount);
     }The two buttons are binded to the the pageSnippet's upBtn and downBtn objects in order to set their rendered status:
<h:commandButton
actionListener="#{pageEditBean.moveSnippet}" type="submit"
image="../images/btn_up.png"
binding="#{snippet.upBtn}"/>I got null nuinter exception, datable variable snippet is reported null
and getter method of the backing bean getPageSnipets is not called at all.
I got null nuinter exception even when rendered property of the datatable is false.
When I remove binding property of the buttons everything works fine.
When instead of binding property I use rendered property of the commandButton and in the getter metthods I return boolean:
public boolean getUpBtn() {
               return downBtn.isRendered();
          } Everything is OK as well.
MyFaces 1.1.5
JSDK 1.4.2_08
Tomcat 4.1.3
Have anybody encountered such problem?
Is there any workaround?
Or can anybody confirm that binding a commandButton to a backing UICommand object inside a datatable works for him?
thanks in advance

Thanks a lot.
You're right, the backing bean has request scope.
I found out (the hard way) that there's a bug in JSF that prevents a commandButton from working, when the button's rendered property is binded to a backing bean's property.
But this solution works.
But I got another problem:
When I click the button, I got java.lang.NoSuchMethodError
Even clicking the button outside the datatable returns the exception.
Again, when I set the bean's scope to session it works.
I don't understand that, except for the datatable business, commandButtons with other request scope beans work well.
Thanks

Dynamic sql and bind variables

Hi,
I have a stored procedure which filters a table on 5 five columns. The filters come from the input parameters,
and these 5 parameters can come in any combination, I mean some of them may be null and some of them may not be null.
So I constructed the where filter of the query with IF blocks like the following:
dynamic_query := 'select * from TESTTABLE where 1= 1';
IF (P1 is not null) THEN
dynamic_query := dynamic_query || ' AND column1 = :1';
END IF;
IF (P2 is not null) THEN
dynamic_query := dynamic_query || ' AND column2 = :2';
END IF;
IF (P3 is not null) THEN
dynamic_query := dynamic_query || ' AND column3 = :3';
END IF;
IF (P4 is not null) THEN
dynamic_query := dynamic_query || ' AND column4 = :4';
END IF;
IF (P5 is not null) THEN
dynamic_query := dynamic_query || ' AND column5 = :5';
END IF;
OPEN CUR_OUT FOR dynamic_query USING P1, P2, P3, P4, P5;
The problem is how can I construct the USING and bind parameters, I cannot use "USING P1, P2, P3, P4, P5" because some of bind variables
may not be in dynamic query if the input parameters are null. Is there a way to overcome this problem without writing all the 2 ^ 5 combinations?
Any help is greatly appreciated.

here it is in the Tomer Cohen way:
IF (P1 is not null) THEN
dynamic_query := dynamic_query || ' AND column1 = :1';
ELSE
dynamic_query := dynamic_query || ' AND :1 IS NULL';
END IF;
IF (P2 is not null) THEN
dynamic_query := dynamic_query || ' AND column2 = :2';
ELSE
dynamic_query := dynamic_query || ' AND :2 IS NULL';
END IF;
IF (P3 is not null) THEN
dynamic_query := dynamic_query || ' AND column3 = :3';
ELSE
dynamic_query := dynamic_query || ' AND :3 IS NULL';
END IF;
IF (P4 is not null) THEN
dynamic_query := dynamic_query || ' AND column4 = :4';
ELSE
dynamic_query := dynamic_query || ' AND :4 IS NULL';
END IF;
IF (P5 is not null) THEN
dynamic_query := dynamic_query || ' AND column5 = :5';
ELSE
dynamic_query := dynamic_query || ' AND -1 = :5';
END IF;
OPEN CUR_OUT FOR dynamic_query USING P1, P2, P3, P4, P5;Amiel Davis

Using drag and drop property in forms.

Hi all,
I want to use drag and drop property in a form during
runtime.I am using oracle 7.3.I don't want to call any
another application.
Is there any way?
Thx in advance.

Mona ! First tell your problem in brief ..Actually what you want
on runtime ...would you like to fetching the data from one item
to another or change the position of any item or
pushbutton ...or what..give detail ...obviously i can help you..
there are many commands like set_item_property ,
get_item_property but right now i could not understand your
prob ..tell me in brief..
You can ask me at [email protected]..
-Anwar

Creating and Binding View Objects dynamically : Oracle Jdeveloper 11g

Hello,
We are trying to create and bind view objects dynamically to adf data visualization components.
The view object is a result of multiple tables.
We are using Oracle JDeveloper 11g Technical Preview. ( can't upgrade to TP2 or TP3 now).
We have found this : http://radio.weblogs.com/0118231/stories/2003/07/15/creatingUpdateableMultientityViewObjectDefinitionsDynamically.html on our search for the same.
The sample application however, is in 10g , hence required migration.
Also, it was a standalone application with the TestClient.java having a main() method.
Our requirement is for Web Application; we use Adf+jsf .
Guidance of any sort is very much appreciated.
Thanks in advance.
-Anil Golla

Hi,
there also exist a forum for JDeveloper 11: JDeveloper and OC4J 11g Technology Preview
What you are trying todo is not trivial because you need to not only dynamically create the VO, you would also dynamically need to create the binding meta data for it (assuming you use ADF). Not sure if the API to modify the binding is public, so posting it on the JDeveloper 11 forum bears a glimpse of hope for an answer
In JDeveloper 10.1.3 you can't do this
Frank

How to use different mail address in "from" and "user" property?

I'd like to use the user enter mail address as the "from" property and use my mail account to send it, but I got error: com.sun.mail.smtp.SMTPSendFailedException: 553 You are not authorized to send mail, authentication is required when set different mail address in "from" and "user" property, how to resolve this problem?

Basically that's a bad idea. Suppose you used your server to send messages that claimed to come from "[email protected]"? Naturally enough people have tried that, either as a joke or as an attempt at fraud, so that servers will check to see if the message is coming from the server it claims to be coming from. And if it isn't -- as in that example -- it will consider it a forgery. Best case (for you) is that the server will flag it as spam or junk. Worst case is that your server will be blacklisted and other servers will ignore it.

Getting an error while fetching the data and bind it in the Tree table

Hi All,
I am getting an error "A navigation paths parameter object has to be defined - " while fetching the data and bind it in the Tree table.
Please find the code and screenshot below
var oModel = new sap.ui.model.odata.ODataModel("../../../XXXX.xsodata/", true);
var oTable = sap.ui.getCore().byId("table");
oTable.setModel(oModel);
oTable.bindRows({
    path: "/Parent",
    parameters: {expand: "Children"}
Can anyone please give me a suggestion to rectify this?
Thanks in Advance,
Aravindh

Hi All,
Please see the below code. It works fine for me.
var oController = sap.ui.controller("member_assignment");
var oModel = new sap.ui.model.odata.ODataModel("../../../services/XXXX.xsodata/", true);
var Context = "/PARENT?$expand=ASSIGNEDCHILD&$select=NAME,ID,ASSIGNEDCHILD/NAME,ASSIGNEDCHILD/ID,ASSIGNEDCHILD/PARENT_ID";
var oTable = sap.ui.getCore().byId("tblProviders");
oModel.read(Context, null, null, true, onSuccess, onError);
function onSuccess(oEventdata){
    var outputJson = {};
    var p = 0;
    var r = {};
    try {
        if (oEventdata.results){
            r = oEventdata.results;
    } catch(e){
        //alert('oEventdata.results failed');
    $.each(r, function(i, j) {
        outputJson[p] = {};
        outputJson[p]["NAME"] = j.NAME;
        outputJson[p]["ID"] = j.ID;
        outputJson[p]["PARENT_ID"] = j.ID;
        outputJson[p]["DELETE"] = 0;
        var m = 0;
        if (j.ASSIGNEDCHILD.results.length > 0) {
            $.each(j.ASSIGNEDCHILD.results, function(a,b) {
            outputJson[p][m] = { NAME: b.NAME,
                                 ID : b.ID,
                                 PARENT_ID: b.PARENT_ID,
                                 DELETE: 1};
            m++;
        p++;
    var oPM = new sap.ui.model.json.JSONModel();
    oPM.setData(outputJson);
    oTable.setModel(oPM);
function onError(oEvent){
    console.log("Error on Provider Members");
oTable.bindRows({
    path:"/"
Regards
Aravindh

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini

Active Directory accountExpires and pwdLastSet property using JAVA

Hi all!
I´m trying to transform the accountExpires and pwdLastSet property retrieved from Active Directory to a Date/Time object. The value returned is a weird long integer that can´t be converted. Does anyone know something about this?
I´m using Java 2 SDK 1.4.2.
I am trying to do the above for accountExpires and pwdLastSet attributes in AD
Thanks

DrClap wrote:
First link returned for Google keywords "active directory date format":
[http://support.microsoft.com/kb/555936]
Why, of course, January 1, 1601...

Extended Receiver Determinatipon and Interface Determination?

Hi,
Where exactly (In which business cases) we can implement or required Extended Receiver Determination and Interface Determination?
Thanks,
Naidu.

Hi,
There are only two modes standard and Extended, Enhanced receiver determinatrion is Extended receiver determination only.
Enhanced(Extended) receiver determination -->
Whenever list of receivers is determined dynamically at runtime, using a message mapping then it is called enhanced.
Enhanced Interface Determination--> It is when you want the target interfaces to be defined dynamically based on the multimapping, that is called enhanced interface determination.
Refre SAP help for more detail
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Thanks!
Edited by: Sudhir Tiwari on Dec 5, 2008 6:34 AM

Java 1.6.0_05 does not recognize first and last property in jnlp file

Hi
Has anybody else seen this?
The jnlp file contains five properties, but the JRE does not recognize the first nor the last property.
It has been working great since 1.4.2, through 1.5 and 1.6 until 1.6.0_05.
<property name='bog' value='%2fdata%2fkirkeboeger1892%2f'/>
<property name='opslag' value='aa001/AB/007/0000a-A.Jpg,aa001/AB/007/0002a-F.Jpg,... </property>
<property name='sessionId' value='ed0l5n55yu2h04alvqxdpbn3'/>
<property name='service' value='http://ao.sa.dk/LAView/ImageServer/Service1.asmx'/>
<property name='titel' value='1908+-+1924%2c+Agerskov%2c+N%c3%b8rre+Rangstrup%2c+Haderslev'/>The 'opslag' property is much longer, so I cut it off to make it more readable.
Pressing 's' in the console gives me this
Dump system properties ...
awt.toolkit = sun.awt.windows.WToolkit
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
http.auth.serializeRequests = true
https.protocols = TLSv1,SSLv3
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = C:\Program Files\Java\jre1.6.0_05\lib\deploy.jar
java.class.version = 50.0
java.endorsed.dirs = C:\Program Files\Java\jre1.6.0_05\lib\endorsed
java.ext.dirs = C:\Program Files\Java\jre1.6.0_05\lib\ext;C:\Windows\Sun\Java\lib\ext
java.home = C:\Program Files\Java\jre1.6.0_05
java.io.tmpdir = C:\Users\MAJ-BR~1\AppData\Local\Temp\
java.library.path = C:\Program Files\Java\jre1.6.0_05\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files\Java\jre1.6.0_05\bin;C:\Program Files\Mozilla Firefox;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;"C:\Program Files\Java\jre1.6.0_05\bin"
java.protocol.handler.pkgs = com.sun.javaws.net.protocol|com.sun.deploy.net.protocol
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = 1.6.0_05-b13
java.security.policy = file:C:\Program Files\Java\jre1.6.0_05\lib\security\javaws.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.6
java.vendor = Sun Microsystems Inc.
java.vendor.url = http://java.sun.com/
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.6.0_05
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 10.0-b19
javaplugin.proxy.config.type = direct
javawebstart.version = javaws-1.6.0_05
jnlpx.heapsize = 64m,128m
jnlpx.home = C:\Program Files\Java\jre1.6.0_05\bin
jnlpx.jvm = "C:\Program Files\Java\jre1.6.0_05\bin\javaw.exe"
jnlpx.remove = false
jnlpx.splashport = 49557
line.separator = \r\n
opslag = aa001/AB/007/0000a-A.Jpg,aa001/AB/007/0002a-F.Jpg,...
os.arch = x86
os.name = Windows Vista
os.version = 6.0
path.separator = ;
service = http://ao.sa.dk/LAView/ImageServer/Service1.asmx
sessionId = ed0l5n55yu2h04alvqxdpbn3
sun.arch.data.model = 32
sun.boot.class.path = C:\Program Files\Java\jre1.6.0_05\lib\resources.jar;C:\Program Files\Java\jre1.6.0_05\lib\rt.jar;C:\Program Files\Java\jre1.6.0_05\lib\sunrsasign.jar;C:\Program Files\Java\jre1.6.0_05\lib\jsse.jar;C:\Program Files\Java\jre1.6.0_05\lib\jce.jar;C:\Program Files\Java\jre1.6.0_05\lib\charsets.jar;C:\Program Files\Java\jre1.6.0_05\classes;C:\Program Files\Java\jre1.6.0_05\lib\javaws.jar;C:\Program Files\Java\jre1.6.0_05\lib\deploy.jar
sun.boot.library.path = C:\Program Files\Java\jre1.6.0_05\bin
sun.cpu.endian = little
sun.cpu.isalist = pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Client Compiler
sun.os.patch.level =
trustProxy = true
user.country = DK
user.dir = C:\Users\Maj-Britt\Documents
user.home = C:\Users\Maj-Britt
user.language = da
user.name = Maj-Britt
user.timezone = Europe/Paris
user.variant = As one can clearly see, the 'bog' and 'titel' (i.e. first and last) properties are missing, resulting (bad code - I know) in a NullPointerException.

We also have this problem, but it's not first and last property.
We have 6 properties, and the 3. property is gone.
If I download the jnlp file, the property is there, if I choose show jnlp file in "javaws -viewer" it's not there. Only difference between this property and the working properties is length.
The length is char 255, and the data is base64 encoded.
I worked fine before upgrading to Java 6 update 5.
Anyone any ideas?

Extending af:convertDateTime (and binding property)

Similar Messages

Maybe you are looking for