Extending N600 wireless network with Airport Extreme, wirelessly

For the past year or so I have run a Netgear N600 wireless modem router, and have extended the network with a first generation A1143 Airport Extreme Base Station (AEBS). Prior to this I have run the same extended network with an older Netgear router - successfully for 5 years.
After a recent lightning strike, the N600 router needed resetting. Everything was back to normal, however I was unable to reconnect the old AEBS to the network as before. I did this so that I could wirelessly back up the laptops to a connected HDD by Time Machine
Figuring that maybe this was the end of life for the old AEBS, I went out today and bought a new 5th generation AEBS, expecting that I could reconnect everything as I have been running with this router, and the old Netgear router before that without a problem.
Now though, with the new AEBS, I still cannot extend the network. Ive tried everything including connecting it via ethernet to the Netgear Router.
I can only surmise that there is something different in the N600 settings that have changed, than now do not allow me to connect.
Ive even reinstalled Mountain Lion, and also Airport Utility, and trashed preferences...to no avail. Can someone please help? Have I just wasted $200 on a new AEBS?
Im running a Retina MBP and a MBAir

Who wants to use WEP these days... I need apple to update the airport so we can use WPA together with wireless hardware from 3d parties like dd-wrt.
I have 2 airport expresses doing nothing atm because of the lack of SAFE encryption with WDS.

Similar Messages

Extend Time Capsule Wireless Network with Airport Extreme

I tried to install two base stations in my house. The first one is the Time Capsule which I use as my main router connected to the DSL modem by Ethernet and which has the main wireless network. The second is an Airport Extreme Base Station which tries to connect wirelessly to Time Capsule to extend the wireless network. I use WPA2 Personal as a security mode and it says there is an error at the end when it reconfigures the Airport Base Station --- questions: does it normally work with these two devices in that order? What process to make it work?”

use Airport Utility manual set up button and place the secondary router in bridge mode then configure your wireless setting.

Extend a E4200v2 wireless network with airport extreme

I have a E4200v2 i also have a Airport Extreme I want to use this to extend my wireless range in my house? I've played around a little tring to configure the Airport extreme but can't seem to get it to connect to my E4200v2?
Can you mod the Airprt Extreme with dd-wrt or something that might unlock some of the features?
I can't stand the interface. The E4200v2 is brand new.

Before I suggest you for any trouble shooting steps, I would like to as few questions. Is you Linksys/Cisco router can able to access the Internet. If YES then try the following steps
1. After unpacking your Airport Extreme, connect the ethernet cable from your jack to the leftmost ethernet port on the back of the Airport. This is the WAN port marked with the small circular image. Next plug the AC adapter into the power port on the Airport and plug it into the wall.
2. Once the Airport Extreme has been plugged into the network and powered on, the status light on the front will go through a series of colored flashes. When the status light glows solid green, your Airport has been initialized and is connected to the network. This may take a few minutes. If your status light fails to glow solid green, please consult your manual for status light explanations.
3. Make sure the wireless card on your computer is enabled and turned on. Connect to your Airport Extreme, which will most likely appear as Apple Network followed by some letters.
4. Next install the Airport software from the included CD. After installation, launch the Airport Utility application. This is located in the Utilities folder in the Applications folder on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows.
Please keep in mind that the Airport Utility is released with a new version every few months, so the screen shots you see below may not look exactly like what you see on your computer.
5. Select your base station, and then click Continue.
6. Enter a Wireless Network Name and a Base Station Name and click Continue. Write these names down for future reference.
7. Enter your Country and Radio Mode on the next screen. Using 802.11n (802.11b/g compatible) is the proper choice in most cases. Click Continue.
8. Select WPA2 Personal security on the next screen, then enter a Wireless Network Password and Verify it. This password must be between 8 and 63 characters. You should write this password down and keep it near your Airport Extreme in case you forget it. Click Continue.
9. Select "I connect to my local area network (LAN)" on the next screen and click Continue.
10. Leave the default settings (Using DHCP) on the next screen and click Continue.
11. If you are interested in connecting USB peripherals to your Airport, consult your manual for additional information. Otherwise leave the default settings and click Continue.
12. Enter a Base Station Password and Verify it. Write this password down and keep it near your Airport Extreme. You will need it if you ever want to modify any settings for your base station. Click Continue.
13. Click Update. Your Airport Extreme base station has been configured and will now restart. Quit the Airport Utility and connect to your new wireless network.
Check whether it helps you or not..

Extend wireless network with Airport Extreme n and Airport Express g

I have a 4th generation Airport Exteme (n) and an older Airport Express (g) and would like to use the Airport Express to extend my network to the other end of my house, where the signal is very weak. When I tried to set it up tonight, my Airport Extreme disappeared all together and I had to do a hard reset to get it back. I am using a macbook pro 2.4 GHz Intel Core 2 Duo running OS X 10.7.2. Are there any current insturctions to do this?

Here's a Youtube video of how to do it. http://www.youtube.com/watch?v=e3EdbRfX1_w
I had the same set up you do. I did not have success with the Express g. And in my case I had much better success when I sold the Express g on ebay, bought an Express N from the refurb store, so it only cost around $20 get something that is much more reliable.
I quickly tried to find an Apple Support tech note for you but didn't, post back if you need more.

Extending a hidden wireless network with airport extreme

For some reason, I'm unable to get my second AEBS to extend the network of my primary AEBS.
Network Topology:
Internet =>
AEBS #1: Gen5 (tower) AEBS running v7.7.3 as my primary AP =>
=> Linksys 8-port Hub =>
LAN Devices
=> AEBS #2: Gen4 (flat) AEBS running v7.6.4 intended to extend the above network
Current Settings:
The AEBS #1 is configured as follows:
Create a wireless network
Do not broadcast the network name for either 2.4 GHz or 5GHz
Timed Access set with all MAC addresses established in the table including both AEBS's and both their frequencies
WPA2 Personal set
Router Mode: DHCP & NAT
The AEBS #2 is configured as follows:
Extend a wireless network
Do not broadcast the network name for either 2.4 GHz or 5GHz
Timed Access set with all MAC addresses established in the table including both AEBS's and both their frequencies
WPA2 Personal set
Router Mode: Off (Bridge Mode)
At this point, AEBS #2 cannot find the network I entered and suggests I select a network from the drop down. Of course, when I click the drop down, there is no network listed because AEBS #1 isn't broadcasting its network name.
So my question is this... will AEBS #2 actually extend the network of AEBS #1 under these circumstances or am I relegated to setting up AEBS #2 as creating another network with the same name, hidden but in bridge mode as above? The reason I would like to extend the network and not have two networks under the same name is because I believe its affecting device connectivity and performance.
Thanks...

Try unhide the name of the network on AEBS 1
Then, configure AEBS 2 to extend the network
Then, go back and hide the network on AEBS 1, then AEBS 2
The reason I would like to extend the network and not have two networks under the same name is because I believe its affecting device connectivity and performance.
We assume that you are configuring the AEBS 2 to extend using wireless. AEBS 2 must use the same wireless network name as AEBS 1 when it extends using a wireless connection. Not possible to use another wireless network name on AEBS 2 when it extends using wireless.
If AEBS 2 connects using Ethernet, then you can set it up with a different wireless network name. In that case it will not be setup to "extend a wireless network".....the correct setting would be "create a wireless network".
You must already know that there are a number of free utilities available on the Internet that will reveal a "hidden" network in seconds, and that anyone who wants to "see" your network can do so very easily. But, it's your call.

Trying to reconnect or restart wireless network with airport extreme

So I have had an airport extreme for 7 months, it stopped working and I returned it and got a new one. Tried to set it up and at first it would show that a wireless network was available but I couldn't connect. So I rebooted it and now now the amber light is blinking. Also airport utility does not recognize my extreme. What can I do. It was so simple to set up originally.

Hi, philsnc94. Welcome to the forums!
Connect your computer to one of the Extreme's Ethernet LAN ports. This should allow AirPort Utility to find your Extreme. Use AirPort Utility to set up the Extreme as desired. Then, if you want, you can disconnect the Ethernet cable connecting the computer to the Extreme and instead have the computer connect to the Extreme's wireless network.
Does this work?

Can I extend Time Capsule network with Airport Extreme

I have a new 2TB TimeCapsule, I would like to extend my network to the front of my house via Ethernet and an Airport Extreme basestation. The wireless reception in the front room is almost non existant, but I do have an Ethernet cable from the existing TimeCapsule connected to my iMac in the front room. I would like to add the old Airport Extreme Base Station to the front room and connect the Ethernet to the Wan port of the AEB and then connect the iMac and my Apple TV to the Ethernet port on the AEB.
I cannot connect via Airport Wireless due to metal studs, Cement block walls.
Is this possible?
Thanks

Is this possible?
Yes. This type of configuration is called a "roaming network"
Apple's instructions for this type of setup are here:
http://support.apple.com/kb/HT4260

Extend 5 GHZ network with airport extreme 5th generation

I'm having issues extending a 5 ghz network with an airport extreme 5th generation. Here is what I have -
1 brand new airport extreme (2013) in the basement connected to the cable modem. It nearly doubled the speed I was getting over the 5th gen.
I moved the 5th generation airport extreme up to the office on the first floor. Due to the construction of the house and a mess that previous owners made with the wiring, it's cheaper for me to have multiple devices extend the network to various parts of the house than it is to tear open the walls and try to fix the coax issue. I have a 4th gen and a 2nd gen, as well as a few airport express models. So, the 4th gen extends the 5 ghz network without a problem. I use the 2nd gen to provide 802.11g (2.4 ghz) to some older devices that can't handle 802.11n. Both work fine. When I moved the 5th gen upstairs to extend the 5ghz network in the office it won't do it.
I did a factory reset on it, Set it up with a new device name, and set it to extend the 2.4 ghz network, and it works without a problem. If I change it to extend the 5 ghz network, it restarts and then flashes amber. The airport utility can no longer see it and I have to do a factory rest in order to get it working again. I downgraded the firmware, but that made no difference.
Any idea why the 4th gen works for this, but the 5th gen fails ?

At times, a Hard Reset will not completely clear all of the old settings when you reset the device, and as a result, you do not start from a true factory default.
If you have not already done so, try a Factory Default Reset this way.....
Power off the AirPort Extreme
Wait a few minutes
Hold in the reset button first, and keep holding it for 9-10 seconds while you simultaneously plug the power back into the AirPort Extreme
Release the reset button after the hold period, and allow a full minute for the AirPort to restart
Not sure what else to suggest, other than taking the device to an Apple Store.....if you have one near you....to let them take a look.

Extend wireless network with AirPort Express

How to extend the wireless network with AirPort Express and Belkin PlayMax as the primary router ?

How it work if I have an AirPor Station and 4 Airport Express, I actually also have an old TimeCapsule and an old AirPort Express. Can I cover all my house (around 300 m2). And will the old Airport slow down or convict with the new ones?

Can I use powerline wireless adapters with airport extreme

can I use power line wireless adapters with airport extreme?

Can this work?
Yes
I read somewhere that powerline adapters are not compatible with Airport.
That information is not correct.
If the AirPort Extreme is already set up as your "main" router, you would connect a short Ethernet cable from one of the LAN <-> ports on the Extreme to the power line adapter.
Locate another adapter in the area where you want to use the AirPort Express and connect a short Ethernet cable from the adapter to the Express.
Configure the Express to "create a wireless network" using the same wireless network name, same security settings and and same password as the AirPort Extreme network and select the Bridge Mode setting for the Express so that it work correctly on the network.

How can I rename an established wireless network using airport extreme?

How can I rename an established wireless network using airport extreme?

Thanks for the info. On your Mac......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the picture of the AirPort Extreme
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window that appears
Edit/backspace out the Wireless Network Name and type in a new name that you want to use
Click Update at the lower right of the window
Wait a full minute for the AirPort Extreme to restart
Close AirPort Utility
The new network that you named will use the same network password that you set up originally.

Problems with Airport extreme wireless network setup

I set up a wireless network with my new airport extreme via the airport utility on my macbook air. The macbook air can access the network and the internet without a problem. However, when I open the airport utility, it claims the extreme can't access the internet. Then, when I try to get to the network from any other component in the house: blue ray players, ipod touches or another laptop, they can see the network, but not connect to it or to the internet. This is my first time setting up a wireless network - I'm divorced and my ex-husband set up the last one. I'd rather die than call him for help. Can you suggest a fix or a way to troubleshoot? I'm convinced that I've done something wrong in the setup, but for the life of me I can't find the mistake. Thanks!

I set up a wireless network with my new airport extreme via the airport utility on my macbook air. The macbook air can access the network and the internet without a problem. However, when I open the airport utility, it claims the extreme can't access the internet. Then, when I try to get to the network from any other component in the house: blue ray players, ipod touches or another laptop, they can see the network, but not connect to it or to the internet. This is my first time setting up a wireless network - I'm divorced and my ex-husband set up the last one. I'd rather die than call him for help. Can you suggest a fix or a way to troubleshoot? I'm convinced that I've done something wrong in the setup, but for the life of me I can't find the mistake. Thanks!

Extending Gen 1 Time Capsule Wireless network with Airport Express N

I am having difficulty setting up my new Airport Express w/ 802.11N (SKU# MB321LL/A) to extend the wireless network from my Time Capsule (SKU# MB276LL/A).
My setup is as follows:
Time Capsule is connected to Cable modem with the following wireless settings:
Wireless mode -> Create a Wireless Network
Allow this network to be extended -> Checked
Radio Mode ->802.11n (5Ghz N only)
Wireless Security -> WPA2 Personal
The issue is the when I attempt to setup the AE to extend the network. I match the settings to the Time Capsule:
Wireless Mode -> Extend a Network
Select the Time Capsule Network
Allow wireless clients -> Checked
Wireless Security -> WPA2 Personal
However after I reset the AE the LED glows Amber and the following problem is reported:
+Wireless Network+
+This AirPort wireless device is set up to join a specific wireless network that can't be found. If you don't see the network that you want to join in the Network Name Pop-up menu, enter the network name and network password if necessary to try again.+
When I check the Airport->Wireless tab the settings were as before.
Any thoughts on this? Thanks.

Welcome to the discussions!
Have you tried to position the AirPort Express close, say 10-15 feet, as a test to see if it will connect that way?
If so, then move it back another 10-15 feet, etc.
5 GHz signals do not travel well or penetrate surfaces very well, so my first thought was that the signal was not strong enough for the Express to pick it up where you had it located.
Message was edited by: Bob Timmons

Extend existing wireless network with airport express..impossible?

I have tried to extend my existing wireless network with an airport express, but it seemd that I always need a ethernetcable...apple support insured me it is possible but the airport utility software only allows me to extend using a cable it seems....

Couple of thoughts here.......
The AirPort Express will only extend a wireless network if you have another Apple router providing the wireless network to be extended.
Is your "main" wireless router an Apple product? If yes, what model number do you have?
It would also help if we could get the model number of the AirPort Express. Some older versions are not capable of extending a wireless network.

Expanding wireless network with Airport Express but without Airport Extreme

Hey guys,
I was wondering if I can expand my wireless network with my Airport Express without Airport Extreme base station. I have a Netgear wireless router. Is it possible? Can you give me tips on how to set it up?
Thanks a lot!
Marc

marcribeiro, Welcome to the discussion area!
No that is not possible. The Netgear is not compatible with Apple's WDS.

Extending N600 wireless network with Airport Extreme, wirelessly

Similar Messages

Maybe you are looking for