External A/V message pops up when opening FCP

It says:
Unable to locate the following external devices:
Apple FireWire NTSC (720 x 480)
I know this means that it can't find the tape deck (which is what I'm using) but I don't really understand why.
(I just want to mention the fact that I am using my school's facilities so everything, minus my external hard drive, was already hooked up)
I shut down everything and made sure no cords were loose and then turned everything back on but I'm still getting the same message when I open up FCP.
If you need any more info I will be happy to give it to you, just bare in mind that I'm not too good with this stuff so you'll have to be reallllly specific

Also make sure that the deck is turned on before you open FCP.
restart the computer. I know this is basic but it is always the first thing I tell friends who are new to this to do as it eliminates a few problems and helps me to know where we are at... If the deck is on and the fresh restart still doesn't see it and you have done what the previous poster said it may be a bad cable, or a setting on the deck.
Keep checking here as the people who are pros here really are very helpful!
I am sure someone will be able to help.
post back with what you have tried s far.
do you have someone on hand who has used this deck and mac successfully that you could ask them as well?
what type of deck are you using?

Similar Messages

Error message pops up when opening camera

Hi Sony,
I bought my xperia z3 on saturday from India. I checked the phone and it was perfect and everything goes fine. On sunday i updated my phone through PC companion( when i connected it shows "a new update is available for my phone") but after that whenever I take my camera app, an error message pops out. It shows " Recording in progress in another app. Cannot record" and it keeps coming ever ( irritating). please do something...
And also I used my walkman app with my MDR XB50 xtra bass headphones (ticking DSEE HX) and while using it when i opens another app like album or something, the song gets stucked for seconds... ( 3GB RAM!!!)
Dear sony, I am a big fan of sony and I have used many sony phones before this (SE W910i, Xperia T, Xperia Z, Xperia Z2). Please dont let me down... :-(

Also I lost this too.. At first there was a Google search bar on top of my phone (like in the first image) but some how i lost that (second image... my screenshot!!)

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.

A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.

A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.

When I open the store in general (from my PC - Windows Vista), I get a message saying "Your request could not be completed. The item you've requested is not currently available in the Canadian Store."
On my iPad, Apps opens, but I can't browse new apps listings, but not their details.
Help?

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

TS1307 "The email server didn't recognize your username/password combination". This message pops up when trying to mail photos from iPhoto. How do I fix it?

"The email server didn’t recognize your username/password combination." This message pops up when trying to send photos from iPhoto via Mail. I have tried reseting passowrds in both gmail and me.com

Thanks for helping Christeneau. You helped me too...eventually. I say eventually because I was puzzled by your 'What does it say behind "email photo's using"'?
I realised the problem was your incorrect use of the apostrophe 's', as in 'photo's using'.
I just could not make any sense of this sentence at all, until I realised that you meant to write, "What does it say behind "email photos using". What you employed was the possesive use of the apostrophe - a mistake that seems to have become endemic in english speaking nations during the last 10 years or so, brought on by the lack of understanding basic english grammar. This has come about because of sloppy teaching methods the world over - it's not really your fault.
It's quite simple: The apostrophe 's' should be used as the following examples show:
James's apple, the car's horn, the world's atmosphere. The one exception is 'its shape,' where there is no apostrophe showing posession because that construction has been used as an abbreviation to 'it is', as in 'it's'.
Plurals (more then one) NEVER have an apostrophe! E.g. CDs, eggs, biscuits, vehicles, UNLESS to show possesion - a CD's label, the biscuit's taste, a vehicle's colour.
Thanks again for you help.

Message popped up when connected iPhone 5s to iTunes for Windows

This message popped up when I connected my iPhone 5s to iTunes
for Windows. Please help!
Message was edited by: Brandon Lopez

Hi there Brandon Lopez,
You may find the troubleshooting steps in the article below helpful.
iTunes: Resolve USB-related alerts
http://support.apple.com/kb/TS5254
-Griff W.

An error message pops up when using text to speech function in trial version

An unable to decode and import the selected wav/mp3 message
pops up when trying to use the text to speech function with the
trial version. It will let me select the voice but will not apply
the changes or convert.
Any suggestions??

Hi there
I've noticed more than few posts about this since Captivate 4
was released.
Are you by chance using Windows Vista 64 bit? Seems most that
have reported this issue have been using that version.
Please report it to Adobe as a bug.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Comment enabled pdf's, showing pop-up when opening in acrobat professional.

Hi all,
We are sending the comment enabled pdf's to authors for review.
Some of the authors stating that its showing an pop-up when they open the PDF's:
We opened the same document in Acrobat 6,7,8 & 9. Professional and Reader. We did't get the above said message.
Are the authors using the outdated version of acrobat which was not compitable for "comment enable".
Please suggest.
Shaji

HI all,
I did't get any help related to this issue.
Can anyone respond.
Shaji

Constant message pop up when trying to back up a page with back arrow - "To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier."

To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier. Pop up message comes up when trying to use back arrow.

You can't suppress that alert.
You get an alert about resending POST data if you go back to a page that was previously requested from the server by submitting form data via a POST form. The only way that Firefox can make sure to get the same page is by resending that POST form. Firefox doesn't know what that form data means, so Firefox asks for confirmation before resending that form data as such an action can cause you to repeat an action and buy another item or post a message another time.
The only way to prevent that pop-up is not to use the Back button, but to open links from a page that was requested from a server by sending a POST form in a new tab (window) with a middle-click or a Ctrl + left-click. Then you can close that tab or window to go back.
[https://bugzilla.mozilla.org/show_bug.cgi?id=160144 Bug 160144] Replace "PAGE CONTAINS POST DATA" with better UI

Error message from web - when opening pdf files

Hi,
I receive the following error message a lot when I try to open an educational pdf file from the web. What do I need to do to 1. see, 2. print and 3. save these type of educational pdf files from the web? I am using a MacBookPro OS X.
Thanks for your help and sorry I could not find an answer on the forum.
Example: I try to import or download MIT18_06SCF11_Ses3.5sum 2.pdf onto my desktop - which seems successful. However when I try to open this file, I get the following error message.:
"Adobe Reader could not open 'MIT18_06SCF11_Ses3.5sum 2.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."

Yes i tried following your list of commands and got the same error from MyMathLab by Pearson Publishing or the other link. I'm beginning to wonder if they are protected.
As you probably guess - I am not computer savvy. I will take my laptop to school tomorrow and ask another student.
Thanks for your followup.

Message tab missing when opening emails in Outlook 2013

Hello,
I have a client where their Message tab will sometimes disappear when opening a new email message window. They have to reboot the application to get the message tab to display again. It's pretty intermittent so it's hard to replicate at the snap of my fingers.
There are no errors in Event Viewer and all add-ins are acting correctly. Has anyone seen this or knows what to look for?
Thanks.

Hi,
Are you using a custom form when creating a new email message? If so, please try clearing the form cache and then check if this issue will happen again. To do this, please follow:
1. Click File > Options > Advanced
2. Scroll to the Developers section, click Custom Forms button.
3. Click Manage Forms button.
4. Click Clear Cache button.
In addition, we can also try resetting your Ribbon to see if it helps. To do this, click New Email button to open a new email, click File > Options > Customize Ribbon, click Reset > Reset all customizations.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Please Help. Message pops up when I try to connect my blackberry z10 to Linc.

Please help.
I downloaded the Linc Software and also restarted the computer numerous times.
Each time when I try to connect my blackberry z10 to my computer the following message pops up:
"Files Needed
The file 'rndismpx sys' on Windows XP Professional Service Pack 3 CD is needed.
Type the path where the file is located, and then click OK."
Please help I have no idea how to make my new z10 connect to the Linc because this message keeps poping up and I don't have any CD's.
Thanks so much.

Never give up: Unininstall Link then do a search and remove all BB and Link files.
Reinstall Link, if you still have the same issue uninstall Link and all BB files.
Depending on what you want to do attaching phone and computer BB Device Manager might be sufficiant
http://supportforums.blackberry.com/t5/BlackBerry-Z10/DIAL-KEYBOARD/td-p/2662937
If you do install BB Device Manager and have the same issue it could be computer related.
Before doing the above check to see if you have the file rndismpx.sys on your system, it is located here:
C:\WINDOWS\system32\drivers probablly not there.
Two choices: uninstall SP3 and reinstall or find the file on another computer copy it then paste it in the location mentioned above.
XP is 12 years old and normally OS is supported for 8 years but was extended for 4 years.
April 8 2014 all support for XP ends, that means no more Security or any Updates.
Eventually you will have to get a new computer. Only 4 months left.
You could check again on the Web for that file, it should be available.

Ipod touch 4th Generation(error message pops up when tryin to sync)

an error message that says (0xE8000001) and the same thing happened when i didnt have the latest version of itunes and it has worked and all of a sudden i cant connect it and that error message pops up and i have the latest version of itunes. pleaseee help.

Type "0xE8000001" into the search bar at the top of the screen next to "Support".

How to prevent BIP login screen pop-up when opening BIP report from Dashbo

Hi
My customer linked BI Publisher report on the Dashboard page by setting
"Embedded Content" as "http://172.18.1.91:7001/xmlpserver/servlet/report".
Customer could open Dashboard directly(just login Dashboard. no need to login BIP) until applied patch 13399232.
After applied this patch,BIP login scrren pop-up everytime when opening dashboard.
Customer's BIP is 10.1.3.4.
Is there any way to prevent BIP login pop-up?
I tested in my BIP 10.1.3.4 enviroment which patch 13399232 doesn't be applied in.
I got the different behaviour with customer's.
I have to login BIP everytime when I openning dashboard.
The only difference between my setting with Customer's is that I added
"Embedded Content" as http://jpdel1203.jp.oracle.com:7777/xmlpserver/~administrator/Test/Test.xdo (It's hostname not IP address)
Is there sth i should set between BIP and dashboard ?
Does anyone kindly advise it?
Thank you in advance.
Best Regards
Liying

Check your BIP integration with Analytics: BIP Admin integration with SAW. Ensure the user and password to proxy into BIP from BIEE is correct.
regards
Jorge

External A/V message pops up when opening FCP

Similar Messages

Maybe you are looking for