External Data source not appearing in Data source type

Hello,
I use SQL Server 2012 BI Edition and use Data tools to create reports. I have a 3rd party Data source. While creating a new shared data source, I cannot get it to appear under the Data Source Type. Only the current built in types are available. For test
purposes, I tried editing the RSReportServer.config and added a duplicate entry and it was shown in the dropdown. What should I do?
When this 3rd party data source is installed, under Tools --> Connect to Database, I am able to get that datatype and connect to my data source. I tried uninstalling and this option goes away.
Regards
Vivek.

Hi Vivek,
Based on my research, the error always occurs when you load custom extensions in SQL Server 2012 Data Tools or use Report Builder 2.0 to run an SSRS 2008 or SSRS 2008 R2 report that uses a custom data processing extension in server mode. According to your
description, it seems that you are not in those two scenarios. So I think this issue can be caused by that the Custom Data Process Extension is not deployed correctly in SQL Server Reporting Services.
The following document about Implementing a Data Processing Extension in Reporting Services is for your reference:
http://www.codeproject.com/Articles/22946/Implementing-a-Data-Processing-Extension
Besides, please note that Report Builder is currently not extensible, and can't load custom data extensions or custom query designers. We can refer to the method posted by Robert to work around this issue:
https://go4answers.webhost4life.com/Example/custom-data-sources-report-builder-30-15682.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

MiniTOC does not appear in translated source file

RoboHelp 8.0.2
WebHelp Output
I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
I have no clue how to resolve this issue. Sample code and screens are listed below.
Donna
English Source
<h1><a name="Top"></a>Working with Web Ordering</h1>
<p>This topic explains how to generate and maintain NAPA and Factory orders.
(Special orders and Non NAPA orders will be available in a future release).
You perform these tasks on the <span style="font-weight: bold;">Order
Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
> Web Ordering</span> from TAMS II BackOffice.</p>
<p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
</span><span>topic</span> for instructions on common functionality such
as sorting data.</p>
<?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
<p> </p>
<h2>Adding a New Order</h2>
<p>Follow these instructions to create a new purchase order:</p>
French Source
h1><a name="Top"></a>Utiliser le module de commande en ligne</h1>
<p>Cette rubrique explique comment créer et gérer des commandes NAPA et
d'envoi direct. (Les commandes spéciales seront disponibles dans une version
future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;">Gestion
des commandes</span>. Cette rubrique suppose que l'utilisateur est connecté
et que la <span style="font-weight: bold;">Gestion des commandes</span>
a été lancée à partir de la page de renvoi de TAMS II. </p>
<p>Voir : La rubrique <span style="font-weight: bold;">Survol de l'interface
Web de TAMS II</span> pour des instructions sur les fonctions courantes
comme le tri des données.</p>
<h2>Ajouter une nouvelle commande</h2>
<p>Suivre les instructions ci-dessous pour créer un nouveau bon de commande :</p>

The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.

Ipod Nano does not appear in Itunes source

Hi all
I have an Ipod Nano and an Ibook, however when i plug my Nano into my Ibook it will not appear in the source menu in Itunes, but the nano does appear on my desktop. I am using Itunes Version 1.1.2, do i need to up grade my Itunes before it will recognise my Nano? If so which version of Itunes will i be able to install onto an Ibook g3 500mhzx running on OSX 10.1.5?

Your version of Mac OS X is too old to use an iPod nano as anything other than an external flash drive; the compatible iPods with your configuration are the first through fourth generation full-size models and the original iPod mini. You need at least Mac OS X 10.3 before an iPod nano will show up in iTunes.
All compatible iPods must be connected through FireWire for use with iTunes in Mac OS X 10.15 regardless of the presence of USB connectivity on the iPod. iPods which require an USB connection are not compatible with your version of Mac OS X.
(21558)

Report data is not appearing

Hi Experts
When we are running ZCO001 in this report data is not appearing in PLANT
IJ01 if same report we are running forPLANT IM01 then data is coming so
please reslove me this issue.
Thanks in advance.
Regads,
Nagesh

Hi,
This is user-developed report (non-standard). Check with your ABAP team why it does not work as you expect.
Regards,
Eli

In the packing list, batch number and expiry date is not appearing for a ma

Dear Friends,
I have an issue in the packinglist.
In the packing list, batch number and expiry date is not appearing for a material.
But in the delivery the batch number and expiry date is appearing.
Why this has triggered and how to solve this?
With regards

Hi Vamsi,
Please go through the output type Smart form or script programe of the packing list and check with the abaper If is there any Bug.
Regard's
Murali.

Billing Due list data is not appearing

We have created Service Contract. After releasing this Service Contract, Billing data is not appearing in Billing due list. Please provide info on how to make it appear.

Hi Raghavendra,
Please define a billing unit and assign the Sales/Service Org to Billing Unit and in turn assign the billing unit to Company code.
And define item categories for CRM Billing and define item category determination as well.
Regards,
Maddy

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

Event dates are not bolded by Date Navigator in Outlook 2010

Event dates are not bolded by Date Navigator in Outlook 2010 on my own calendar. Events are set to busy but it is not working. View Settings > Other Settings > "Bolded dates in Date Navigator represent days containing items" is
checked. This previously worked for 2+ years but recently stopped working. All plugins were disabled, Outlook 2010 was uninstalled and then re-installed. OST file was deleted and re-synchronized with Exchange 2007. While the OST was re-synchronizing the
bolding worked properly but upon next restart of Outlook it went away. Another symptom is that my Scheduling Assistant does not show my free/busy times correctly in my local view. If I look at my own schedule via the Scheduling Assistant of another user, the
free/busy times show up correctly. My webmail account also correctly shows bolded dates and free/busy suggesting that this is a local problem. Some screen shots below. Anyone have any ideas as to what I need to tweak? Using Oulook 2010 v.14.7116.500 (32-bit).
This is not a shared calendar.

Hi,
If you want to completely uninstall or remove Microsoft Office 2010, we can refer to the following article to do it:
http://office.microsoft.com/en-us/support/how-to-uninstall-or-remove-microsoft-office-2010-suites-HA104027750.aspx
Additionally, since the issue doesn’t happen in other computers, I think the issue may be also caused by some third-party programs in your original computer. If the complete uninstallation doesn’t help for this issue, I suggest we can try to perform a clean
boot in your Windows for more troubleshooting:
http://support.microsoft.com/kb/929135/en-us
Thanks,
Winnie Liang
TechNet Community Support

IPhoto, sort by date is not a true date/time sort

In iPhoto, sort by date is not a true date/time sort. If you have two cameras with there own naming convention iPhoto sorts filename by date separating the two cameras in the view. Is there a way to sort by DATE&TIME ONLY?

Using two cameras using iPhoto to upload pictures.
Both cameras are set to the correct time and date.
Connect camera ONE filenames IMGP0101
By default:
No event name
Split events checked
Select import 12 photos
Creates events:
Untitled event December 27, 2013
In order by time
Untitled event December 28, 2013
In order by time
Untitled event December 29, 2013
In order by time
Untitled event December 30, 2013
Connect camera TWO filenames IMG_1101
By default:
No event name
Split events checked
Select import 12 photos
Creates events:
Untitled event December 28, 2013
In order by time
Untitled event December 29, 2013
In order by time
Untitled event December 30, 2013
Now I have 2 events for each of December 28, 29 and 30 they are not all under the same event name. My only option is to click and drag the pictures from the second set of events to the first set of events then they are in order. This is a real pain to do. There needs to be a way to reset the event dates so all pictures from both cameras end up in the right event date.

Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer. I would gratefully appreciate any help in solving this,

Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer. I would gratefully appreciate any help in solving this?

I have the same problem; used Migration Assistant to transfer all my pix from PC to MacbookPro, however dates of pix were not transferred. Date created as the date of transfer. Cannot sort my pix according to date.
Anybody has an answer?

Data Transfer Not Up-To-Date and To Be Archived at Project definition ?

Hi All,
I want to know about the statuses "Data Transfer Not Up-To-Date and To Be Archived at Project definition level?" In documentation Flagged for Transfer and To Assign are only mentioned.
Thanks and Regards,
Arti.

Hello Arti,
the system sets this status when there is a problem with the replication. For example, in the customizing of your project type (accounting area) you have defined the type of transfer as 'Automatic as of release of project'.
Now, for example, you have a project that has status 'Created - Transferred - Data Transfer Not Up-To-Date - Assigned', this means that the replication is not yet complete because according to the customizing setting you need to release the project first.
Hope this helps!
Best regards,
Silvia

Creating list- data from child data source not appearing in output

I am trying to create a list of leads created between a date range for customers in a specific state. My audience is Persons. When I run the list, it does not return any values. However, I noticed that the date fields are not in the output. How do I get the date fields (from data source LEADS) into the output for my list? It seems to only be giving me output for the Parent data source of PERSONS.

Map the Date Fields of the Leads data source to the ams_list_entries and check the box display in list entries.
HTH

Oracle data provider not appearing in MS Business Intelligence reporting

Oracle Data provider does appear is VS 2005 server explorer but NOT as a data source in the reporting project type.
This is in oracle ODAC beta 11
Is this supported?

I believe your developer encounters a hang when using the Microsoft reports wizard with MS OracleClient. I don't know why this is happening, but this issue would need to be resolved by Microsoft. They build both the reports wizard and MS OracleClient. They would need to identify what in their code is causing the problem. If they find out the underlying cause is a call they are making into Oracle, then Oracle will fix it.
Oracle builds ODP.NET, which I haven't seen work with the reports wizard query builder. But I haven't fully investigated why. There may be additional configuration needed to wire these together.
If you would like to discuss this in detail, you can email me at alex.keh [at] oracle.com

Master Data is not appearing in Info Object

Hi Experts,
I have loaded text data from data source 0WS_QUEST_TEXT to info object 0WS_QUEST. While running DTP, Load monitor displays 12 records are added to info object.
Also while activating master data it gives error: "Master data for characteristic 0WS_QUEST already active"
When i select Display Data option by right clicking on Info Object 0WS_QUEST, no data is displayed.
Please let me know whether I am missing any step while loading master data.
Please note that info package has already run and data is there in PSA.
Thanks in advance
Regards,
Niranjan

Hi,
Just go to Infoobject and right click and select option maintain master data.
Don't put any value and just execute.since there are only 12 records,it should show all the records .
You can also check text table data by getting inside that object directly or through SE11/SE16 option.
When the records are activated ,it will not activate it again,so it is not error,its just a message.
Let me know if u have any further doubts.
Thanks and regards
Kiran

Page Numbers Not Appearing in Data Merge Document?

Hello, hopefully someone can help. I am pretty new to InDesign but learning a lot. I am creating a member directory of about 200 pages (about 2800 records merged from .csv to InDesign 6). Everything is working fine with the merge, except generating the page numbers. I tried adding page number at the bottom of the page to the master BEFORE merging. But if I do that, it greys out the "multiple records per page" option when trying to perform the Data Merge (using "Create merged Document"). So, I tried adding the page number to the A-master AFTER creating the merged document, but the page number is not appearing on any of the pages. There must be a way to do this, can anyone help?
(FYI - to generate the auto page numbers, I am going to the Type-Insert Special Character-Markers-Current Page Number, and placing that within a text field at the bottom of the page. Thanks in advance. )

Here is a screen shot. I have placed it on the A-Master. See Screenshot#1. Screenshot #2 shows Page 70 with no page number (and no other pages have page numbers that I can see. Thanks for your advice on fixing....
Sorry, here is screenshot #2, (with personal details redacted but the records are there behind the grey boxes):

External Data source not appearing in Data source type

Similar Messages

Maybe you are looking for