Master Data is not appearing in Info Object

Hi Experts,
I have loaded text data from data source 0WS_QUEST_TEXT to info object 0WS_QUEST. While running DTP, Load monitor displays 12 records are added to info object.
Also while activating master data it gives error: "Master data for characteristic 0WS_QUEST already active"
When i select Display Data option by right clicking on Info Object 0WS_QUEST, no data is displayed.
Please let me know whether I am missing any step while loading master data.
Please note that info package has already run and data is there in PSA.
Thanks in advance
Regards,
Niranjan

Hi,
Just go to Infoobject and right click and select option maintain master data.
Don't put any value and just execute.since there are only 12 records,it should show all the records .
You can also check text table data by getting inside that object directly or through SE11/SE16 option.
When the records are activated ,it will not activate it again,so it is not error,its just a message.
Let me know if u have any further doubts.
Thanks and regards
Kiran

Similar Messages

Error in master data load in time dependent info object

hi,
while loading master data(Texts) to time dependent info object i am getting error like <b>"INFODEP1 : Data record 8 ('00000512 ') : Invalid "to" date '1-2-2004 '</b>
can anyone help where exactly is the error and how to remove it.
Thanks
Ashish

hi,
the date format should be yyyymmdd.
regards
pls assign points if helpful.

Master data check not working when loading into and ODS object

Hi guys,
we are loading transactional data into an ODS from a flat file.
In the infopackage, we have checked the option :
"Do not update data if no master data exists for a characteristic".
This option seems to be unreliable :
For some characteristics (it seems those loaded using transfer rules (routines)), incorrect data is still loaded into the ODS even if no entry exist in the associated infoobject master data table.
Any help appreciated.
Many thanks !
Pierre-Yves

Hi Dear,
please delete all the incorrect master data from the master data characteristic first and then try to uploading the data again .It should work, because there migth be some master data created when data were loaded with out the check before.
And please check whether all your characteristic info object are of master data , I mean that in the infoobject defination you have checked the master data check box on the info object. If you have only text then it might fail the master data check.
hope this help.
cheers,
balaji
Message was edited by: Balaji NS

Master data should not overwrite

Hi
How is it possible to avoid overwriting of master data.
Custom datasource is created to extract multiple records for a single account with different attribute pin values. Problem is in BW where the multiple records become one. Can this be overcome.

Hi,
master data functionality cant be changed because there will be no master data with duplicate records,main info object acts as primary key, as per data base functionality primary key cant holds duplicate records,
if you want to store that duplicate values use ODS in place of info object and make ODS additive from over write.
assign points if it helps,
thanks,
pavan.

Problem in loading data from flat file to info object

Hi experts,
I am new on bw. I am trying to load data from .csv file to info object. CSV file contains two colums Mat No, Mat Name and are separated by comma and similarly Mat Name is attribute of Mat No in info object. I am doing all steps by following the book but whenever I load data into info object it is loaded in one column. I mean both Mat no and Mat name apears in Mat No column whereas Mat Name column appears empty in info object. I have changed exel file into .csv. Any one can help me sort it out.
regards

Hi,
your flatfile should be in the form of csv ie it does not mean that in a word u seperate it with coma
create an excel file and say save as in teh file name give the name of your flatfile and in the save as type select CSV(comma delimited) from the drop down list
and then in this file enter the data as u fill in excel sheet.
After closing the file right click it and say open with wordpad then the data should appear seperated with a comma.
Try this and then revert back in case of any doubts.........
Are u loading data into BI 7.0 or 3.x
Regards
Madhavi

Master data infopack assignment to Transactional Info source

Hi all,
I have been using Standard content cubes and ODS. What i observed was that, i see the master data infopacks under the transactional info source. Some infosources are feeding the Info objects, whereas some of them are feeding some Masterdata ODS. As i never came across such scenario, i was confused. Did any of you, came across such assignment for the infosources? Any insight on this issue would be helpful.
Note: All the infosources used are out-of-box.
Thanks in Advance,
Mav.

Hi Maverick,
Are you referring to flexible update of master data as it's possible from BW 3.x to load master data into an ODS object.
Check the link below ->
http://help.sap.com/saphelp_bw31/helpdata/en/98/3a14836fe5e1499a4e17d2d45f4612/content.htm
Hope it helps,
Sree

Billing Due list data is not appearing

We have created Service Contract. After releasing this Service Contract, Billing data is not appearing in Billing due list. Please provide info on how to make it appear.

Hi Raghavendra,
Please define a billing unit and assign the Sales/Service Org to Billing Unit and in turn assign the billing unit to Company code.
And define item categories for CRM Billing and define item category determination as well.
Regards,
Maddy

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

Profiling application but component does not appear in Live Objects

I have built an application using Flash Builder 4.6 and Flex SDK 4.6, which consists of many custom-built components, some of which are vast and contain lots of code. When I run the application, one of the components which loads using PopUpManager is causing the memory usage in Task Manager to increase and despite closing/reopening the component, the memory usage never goes down, only up. Eventually the process runs out of memory and crashes.
So I'm trying to profile the application. When I run the profiler, I can see all the classes opening into the Live Objects window. However when I load the component which is eating the memory, it appears in my application but does not appear in Live Objects, nor does any of its children.
What would cause this to occur?
Also am I doing the right thing by using components or should I be using modules instead?

hi Venkat,
it seems that 0sold_to not assigned to any infoobject catalog, you can try modify it with RSD1, to bring it to infoobject catalog, you can choose one infoobject catalog right click, change, and move 0sold_to from left to right and activate the infoobject catalog or use following function module (SE37)
hope this helps.
RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute
Note 573421.

Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul

Report data is not appearing

Hi Experts
When we are running ZCO001 in this report data is not appearing in PLANT
IJ01 if same report we are running forPLANT IM01 then data is coming so
please reslove me this issue.
Thanks in advance.
Regads,
Nagesh

Hi,
This is user-developed report (non-standard). Check with your ABAP team why it does not work as you expect.
Regards,
Eli

Not appear add/remove object merged

Hi,
I have a web intelligence report with a merged, but the option does not appear add/remove object in the merged, however, supposed that this function would be enabled on the version you just updated, as mentioned in this link:
https://scn.sap.com/community/businessobjects-web-intelligence/blog/2013/03/10/what-is-new-with-web-intelligence-bi-41-part-2-core-capabilities
upgrade
BI4.1 SP1 Patch7
regards

Maybe something here will help?
[[Removing the Search Helper Extension and Bing Bar]]

In the packing list, batch number and expiry date is not appearing for a ma

Dear Friends,
I have an issue in the packinglist.
In the packing list, batch number and expiry date is not appearing for a material.
But in the delivery the batch number and expiry date is appearing.
Why this has triggered and how to solve this?
With regards

Hi Vamsi,
Please go through the output type Smart form or script programe of the packing list and check with the abaper If is there any Bug.
Regard's
Murali.

Why change pointers for master data, why not change message?

Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.

Change pointers are getting stored in the tables BDCP and BDCPS. As SAP suggests these tables should be as small as possible. And Master data are not much frequently changed data.
As you compare with the transactional data, you need to change them many times in the real scenario. If we also process the transaction data via chnage pointer, these changes BDCP is getting more and more entries.
RBDCPCLR is the program used to process the change pointer. If you have much data in the BDCP table, this program will take much time to run.
So, we use the change pointers for the master data only.
Regards,
Naimesh Patel

Info-Object Master Data is not populated using Attribute View

Hi Colleagues,
I have one info-Object 'Resource', compounded with client, resource type and scenario.
I want to fill its master data using an attribute view. In Master data tab, i have mentioned the package and attibute view (SAP HANA MODEL).
Assigned all the attributes to respective fields in attribute view.
I can see data using the 'Data Preview' in my attribute view.
Two issues --
1. Maintain master data option is disabled in the context menu of 'Resource' Info-Object.
2. Also the data available in attribute view is not populating in master data of info-Object ( I tried seeing by creating a report).
Please suggest what is wrong here.
Thanks in advance.
Regards,
Rohit

Hi,
When you are loading data from DSO to IO, seems like some filtering is happening. Just check the active table of DSO and make sure that you have all the 59 records available.
Another important thing is check the primary key of your master data i.e. if there is any compounding attribute if not then records from DSO might be getting overwritten in the master data. i.e. only 6 unique records.
Regards,
Durgesh.

Master Data is not appearing in Info Object

Similar Messages

Maybe you are looking for