External definations Message type with bpm.

Hi All,
Can we use external def inside bpm?
I have an external def and a Message interface from it - abstract synchronous,but its not been reflected while declaring a variable of type interface.
This interface does not show in the interfaces list to select from while variable declaration.How can I do this?
Please advise.
thanks.

Use the following steps in BPM
1) Receive Step (Opens S/A Bridge)
Properties:
Name: Receive1
Message: Request_var
Start Process: yes
Mode: Opens S/A Bridge
Sync Inf: Sync_AI (Abstract Sync interface)
Sync_AI:
Output msg is Request_MT
Input msg is Response_MT
Request_var is interface variable referring to Request_msg_AI an abstract async
Request_msg_AI:
msg type is Request_MT
2) Send Step (synchronous)
Properties:
Name: Send1
Mode: Synchronous
Synchronous interface: Sync_AI
Request Message: Request_var
Response Message: Response_var
Receiver from: Send Context
Sync_AI:
Output msg is Request_MT
Input msg is Response_MT
Response_var is interface variable referring to Response_msg_AI an abstract async inf.
Response_msg_AI:
msg type is Response_MT
3) Send Step (Closes Bridge)
Properties:
Name: Send2
Mode: Closes S/A Bridge
Message: Response_var
Opened by:Receive1

Similar Messages

Regarding Custom defined message types

hi guys,
i never got to work with custom defined message types but got to work with already defined message types and i just want to know why exactly do u need this and can any one please share their experience, why they have to design a custom defined message types especially in SD and MM with an example.
thanks very much,
pavan.

What do you mean by custom message TYPE? We create custom messages all the time at my company, by never a custom message TYPE. Not sure what you mean here.
Regards,
Rich Heilman

Message Splitting with BPM

Someone knows about an example on splitting a message into several messages (multiline element), the target message type is of one type.

Hi,
<i>Someone knows about an example on splitting a message into several messages (multiline element), the target message type is of one type.</i>
>>>Several messages means several message types ..
But if you want to get multiple lines then it is called multiple occurences. i.e One message type is having multiple main segments.
For e.g in this case, one message type with multiple Segment can occur. If this is your requirement, then no need of multiline etc. Just you need to map it correctly.
<Target>
   <Segment> (1..n)
</Target>
If you want multiple messages i.e one then it will be like this
<Messages>
   <Message1> 1..n
     <Target>
    </Message1>
<Message1> 1..n
     <Target>
</Message1>
</Messages>
Hope this helps,
Regards,
Moorthy

Inbound Processing with reference to user defined Message type

Respected Readers,
I have created a segment with fields
Matnr
mbrsh
mtart
vpsta
maktx
meins
matkl(Total 7 fields)
I have created a idoc also and a message type and assign the idoc with message type.
Now i have set the communication partners also and created the distribution model with my message type and distributed also to the reciver side.
Now as it is not the standard message type like MATMAS so we cannot use the tcode BD10 to send the material.Instead of it i have to write the program to create the idoc for sending it.
So i have created the program for the generation of IDOC.
Upto here picture is clear.
In the case of Inbound in standard we use the tcode BD11 to get material but same thing as we are not using the Standard Message type we have to create our program.
Now in this case i have written a function module and that function module is attached to the process code and process code is attached to the message type and message type is attached to the partner profile.
i have done the assignments in we57 and bd51 also.
Now idoc is created in the inbound side with status 70.
but i am not getting how to upload this data in standard tables Mara and Makt.
So that if i go to tcode MM02 and give the respective Matnr ,it should display that material.
First tell me what i have done is the right procedure or i have to make somechanges somewhere .
Secondly if you please give me the function module code for inbound processing to upload the data in this standard table( mara ,makt) so that material is created in the reciver side also.i will be very thankful to you.
I am only using seven fields in creating the material.
Please kindly send your answers and not links .
Thanks

i have done the same thing and used same parameter in import ,export ,tables and exception tab.
i have written some code also .
But i am not getting the code to upload the data in the standard tables so that material should be get created automatically as soon as the data get uploaded
in tables.
Somewhere i have read that you have to use the BDC concept Call transaction method to upload the data.
But how to use the BDC code in Function module , i am not getting.
Please can you send any example of code for this task.

Using Fault Message Type in BPM

Hi,
In my BPM Scenario, I am using a synchronous send step in which I am using a fault message type.For giving the container for the fault message in the Properties area of the send step, I want to define a container corresponding to the Fault message Type I have already defined.How can I achieve this since it is not possible by defining an Abstract Interface? Can someone please explain how to do this?
Thanks and Regards,
Soumya.

Hi Soumya,
Here are the links for two threads. one has discussed fault mssage type in bpm and the other the general application of a fault message type.
thread1:- Alert monitoring and fault message types
thread2:- fault message in BPM process
Regards,
Sushumna

How link customize IDOC message type with FM ?

Hi,
I have created new IDOC message type ZCOST and FM ZMASTERIDOC_CREATE_COST. (Outbound).
Please advise how link the message type and FM ? so everytime i am executing BD21 with message type ZCOST the program always calling FM ZMASTERIDOC_CREATE_COST to generate the IDOC.
Thank You and Best Regards
Fernand

HI,
You need to link Mssage type, IDOC type and the FM (also extension idoc type if exits) in TCODE: WE57 --> go to change mode
--> then new entries --> even you need to gove the direction inbound/outbound.
Also you need to create a outbound custom process code in WE41. and link the FM to the process code.
This process code shold be assigned to the partner profile in we20 in outbound parameters -> so you FM will be picked up qutomatically.
regards,
Nazeer
Edited by: N a z e e r on Jul 14, 2010 3:14 PM

WMTA message type With transmission medium 8

In warehouse management, when we create Delivery using VL10B, if WMTA message conditions have been set, system will create transfer order immediately.
With WMTA message, if we do not use transmission medium 8( special Function) , then system does not determine WMTA and no transfer order is created.
Can you please help me by explaining , how WMTA message type creates Transfer order when delivery is created.
I think, transmission medium '8' is doing something , ( may be calling a method or badi or something , to create Transfer order from delivery).
So please can you help me in this regards?
Thanks in advance.
Bharat.

of course the medium 8 is triggering something in SAP, as you dont just create an output like you do it with medium 1 paper or 2 fax.
I have never asked why SAP is using 8. I was just lucky that SAP described that we have to use 8, and that it works.

Define Message Types for Purchase Order.

Hi,
is it true that message type "NEU" doesn't require to fill
the smartform field in Processing Routines ?
Yours truly

If you are using the std form then you dont need smart form
std form is SAP script adn smartform is diff form then SAP script

How to define complex type with table per record?

Hi,
for one of my tasks I'm dealing with XML export. After short investigation of the postings in the forum I found an acceptable solution:
Re: Convert ABAP to XML and Vice versa
The issue is that I need an XML file like this:
<plant>
<material>
    <purchases>data</purchases>
    <purchases>data</purchases>
    <purchases>data</purchases>
    <sales>data</sales>
    <sales>data</sales>
    <sales>data</sales>
</material>
<next material>
</next material>
</plant>
So here are the questions:
1. Is it possible (and how) to define such deep structured type where for each record (means material) there is at least 1 internal table connected to that record? That would let me use a record-2-DOM conversion and a standard DOM-2-XML renderer.
2. Could anyone please provide a very simple and short example?
Of course, I could write my own XML renderer and achieve what I need (without using DOM, simply write to file all the desired XML tags while looping at my *nested* tables), but if there is a way to define such a structured type and further to fill it with data, it would help me learn a little bit more about abap opportunities and would save me a bit more time to create a renderer.
Many thanks in advance.
Regards,
Ivaylo Mutafchiev

Hi,
You can declare deep structure as below
TYPES : BEGIN OF ty_address,
          house(10) TYPE c,
          street(10) TYPE c,
        END OF ty_address.
TYPES : BEGIN OF ty_itab,
         name(10) TYPE c,
         age      TYPE i,
         address TYPE ty_address OCCURS 0,
        END OF ty_itab.
DATA : i_address TYPE STANDARD TABLE OF ty_address,
       i_itab    TYPE STANDARD TABLE OF ty_itab.
DATA : wa_address TYPE ty_address,
       wa_itab TYPE ty_itab.
CLEAR : wa_address,
         wa_itab.
wa_address-house = 'House1'.
wa_address-street = 'Street1'.
APPEND wa_address TO i_address.
wa_address-house = 'House2'.
wa_address-street = 'Street2'.
APPEND wa_address TO i_address.
wa_itab-name = 'Test'.
wa_itab-age = 10.
wa_itab-address[] = i_address[].
APPEND wa_itab TO i_itab.
Also check structure BSPL_GRID_FIELDCAT field CELL_COLOR

Diff between Idoc type and message type

Hi Friends,
I have a created a message type and IDoc type with similar name ZVOU_IN_LYNX .
If I have the similar names for these two , is there any further future related issues.
kindlly suggest on this issue ASAP.
Regards
Punjaala

Hi ,
idoc type is a comibination of Segments it is like a structure.
Message type actually tells the meaning of idoc..
Message type + iodc type + exension idoc type used in furthe uses..
here actually idoc type come to use..
we30 Idoc type          "single Idoc type--with basic type..
we30 idoc type         "multiple idoc with above copy called extension idoc..
WE81 Message types: Create a new messagetype         "Single message type
WE82 Idoc Type/Message: Create Entry to link the above defined message type with the IDOC + "extension....
WE57 Message/Application object: Create entry for Functionmodule/IDOC type/Messagetype/Object
Edited by: Prabhu Das on Apr 17, 2009 7:27 PM

Creation of Server Proxy for Message interface with External Defination

Dear All,
I am getting a problem while generating a server proxy for the inbound interface . The request message used in the inbound interface is a external definition which is uploaded using a XSD file. The XSD file was supplied by a third party which is having very high complex strucuture and used lot of abstract data types in the design. When i tried to generate the proxy in the R/3 system (Transaction SPROXY) for the inbound interface i am getting following error.
Interface uses external and internal message definitions
Message no. SPRX122 *
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
Please guide me, how to generate the proxy for the interface with external defination message. I could nt geneate manullay, because it is having very high complexity and its a big structure.
Is there is any way to generate the proxy for interface with external definition
Regards
Vijayanand

Hi,
i. Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
ii. Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
Check this, it may help you
http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
REgards
Seshagiri

Creating message type in XI with imported objects

Hi,
I have imported an Idoc Structure into XI.
Now I need to create a message type with structure from imported Idoc + some additional fields.
Can some one tell me how to go about this. Because once I drag and drop the imported Idoc structure, I doesn't allow me to add any more fields during message type creation.
Is there a different to way to achieve this.
Best Regards,
Kiran

Hi Kiran,
the Integration Builder supports two ways of modelling an interface. The first way is to build the required datatypes from scratch (with the datatype editor) then define (fault) message types using these datatypes and finally define the message interface.
The second way is to use an externally defined structure by importing an IDoc or RFC from an R/3 or an external DTD/XSD/WSDL from filesystem. Then define your Message Interface using the messages from the imported objects.
Currently there is nearly no support for mixing these two approaches as you have in mind (taking an externally defined structure as starting point, then enhance this structure within the Integration Builder).
The best workaround I can suggest to you, is import the IDoc, take the XSD which is displayed for it, download it to your local file system, edit it there (with notepad when you are an XSD expert, with some other tool like XML Spy otherwise) and upload the modified file as External Definition.
BTW: For this procedure you do not necessarily need to upload the IDoc to the Repository. As far as I know the R/3 also offers the possibility to generate an XSD representation for an IDoc (do not remember the exact way to go there).
Greetings Stephan

To SET -UP message type 5 External Send to the purchase order approver

Hi All
Please help me to To SET -UP message type 5 External Send to the purchase order approver
Susan

Susan,
This to me sounds like a release strategy setup using workflow. Could you please set up Release strategies initially and and then the workflow part couldd be handled by a workflow personnel.
Else, Setup teh message type with medium 7, and partner function MP, put the user name in the partner field. Go to communication method, choose the recipient type and fiull other required parameters and you should be set.
Edited by: Pavan Kumar on Apr 6, 2010 12:27 PM

Want to add multiple idoc type with single message type.

Hi Gurus,
I have a problem. I want to add multiple idoc type with single message type in WE20.
How we can do this in WE20 or is there any other way to do that?
Please help me.
Thanks in advance.
Srimanta.

hi,
basically in partner profile i.e. in we20 , we add details to the receiver / sender port that we have created using we21.
so what exactly we do in that is that we first use the message type for those idocs that we have created.
now based on those message type we create a process code. now this is the reason why you cannot apply several message types with the same name in we20... as process code is unque for each message type.
so thats why you can only assign the same message name to several idocs in we82 and then in we20 define the process code for that message type.
it will solve your problem.
hope this will help you!!!
Thanks & regards,
punit raval.

Multiple files (with same message type) into a single file

Dear All,
I am having multiple files(same message type) with details like header data and its line item details in each file. The structure of all the files will be:
File1    File2   File3
H1        H2      H3
L1         L1      L1
L2
L3
Now my requirement is that after every 10 hours all the files should be picked and merged (append) into a single file as target file. The structure of output file will be now like
H1
L1
L2
L3
H2
L1
H3
L1
Kindly guide on how to proceed on this with BPM or without BPM
Regards,
NJ

Now my requirement is that after every 10 hours all the files should be picked and merged
(append) into a single file as target file.
Check the use of "Availability Time Planning" of the adapter in your case
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
If your requirement is to append you can do so by using the File Construction mode as Append in receiver File adapter
If your req is to do a N:1 mapping (i.e. merger) then develop a mapping program accordingly...
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 3, 2009 10:30 AM

External definations Message type with bpm.

Similar Messages

Maybe you are looking for