External drive and ipod won't mount after latest security update

I just downloaded the latest security update on my powerbook, and now my lacee external hard-drive won't mount. I ran disc permissions and still nothing. My ipod charges from the firewire port but doesn't mount either. The hard-drive mounts fine on my dome imac which appears to have the latest updates as well. Could it be a problem with the firewire port itself or something to do with the security update? Thanks for the help.

Your PowerBook is hurting my friend. Check "About this Mac" and see if the memory reported is the actual memory you have installed on the machine. I had a PB that had 1GB installed but the machine only read 256. Ended up needing a logic board replacement. Check http://docs.info.apple.com/article.html?artnum=303173 to see if it applies to you.
Unplug all devices from the PB, leaving only power connected.
If it everything seems cool, then you'll want to start up in "single user mode". Restart the PB and hold down the  + s (apple and s) keys until you get a black display with white characters. Once you get the command prompt signified by a # character. At that point type in the following at the prompt
fsck -yf
then hit your return key
As the system check your HD, notice any errors that are displayed. After it is done it will inform you of any modifications, or if it thinks everything is cool.
then again, type in
fsck -yf
then hit your return key
You'll want to have run the fsck -yf utility a total of 3 times. Hopefully at the end everything will be good (No errors) "* appears to be OK".
In any case, type in
reboot -n
then hit your return key
Your PB will reboot. After the OS has loaded, plug in your FW devices and see if they mount. Either way post back with results.
d

Similar Messages

Won't Restart after latest Security Update Download.

Yesterday I downloaded the latest Security Update to my Mac Mini with Snow Leopard. It downloaded but would not restart. I finally managed to get it to boot to a bootable external drive and using Disk Utility found the HD was OK but the Preferences way out of wack. I did what I could but when I tried restarting to the original drive it would not work. I just get the white screen with a circle and stroke through it after a minute with the spinning ball. I have tried the original start up Disk, pressing C on Startup, but it just spits it out. I tried to use an older System disk, one for Leopard but it will not see it. I tried zapping the PRAM twice to no avail. Now it won't see the bootable drive either.....
To me it sound like a massive hard drive fail. Nothing to do with the Security update. Your thoughts on this would be greatly appreciated though.....
Thanks,
Stephen

No one on the Apple site could help me so I took it into Tekserve in NYC. I was afraid that I was going to have to replace the entire Hard Drive but they finally managed to get it working. In the end for $60 they reinstalled the System, keeping all of my files intact. I have a bootable external drive, but I was happier not to have to use that. Apparently it was a multilevel problem, and not something anyone can fix themselves. If you look at the Apple discussions quite a few people had problems with that update.....
Best of luck,
Stephen

IBook G4 won't load after latest security update, repair doesn't work?

Hi I had the same problem as someone else in this forum:
"Last night I saw that my ibook G4 wanted to do a security update. I told it to do it, and the ibook has not started since. It reset itself after downloaded, but it just stays on the booting up screen, never actually booting up so I can use it. After about two hours of trying to boot up, I turned it off, and on again, and it still wont boot.
I really need suggestions as how I can fix it. Thanks
ibook g4 Windows 2000
Carolyn Samit
Posts: 8,431
From: Alameda CA Bay Farm Island
Registered: Aug 5, 2005
Re: G4 wont boot after latest security upgrade
Posted: May 22, 2009 2:51 PM in response to: voiletmay
Click to reply to this topic Reply email Email
HI,
Ok... you need to boot from your install disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If you cannot boot from your install disk, try booting in Safe Mode
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
If you have the original hard drive in this iBook, it was probably a 60GB drive? When you can do this, check to see how much available disk space there is.
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Not enough available drive space can cause issues like you are experiencing.
Carolyn "
I tried restarting it after the repair (there were some things to repair and I tried to repair twice just to make sure it didn't miss anything) but it still won't load. It says its starting the OX system, but when the blue bar reaches the end, it doesn't do anything from there. I also left it on for hours and it did nothing. My mousepad still lets me move around the mouse, the caps lock key still lights up, as the num lock key. I tried safe mode but that won't load either...any other suggestions?

*" I also left it on for hours and it did nothing. "*
Your iBook needs to go in for repairs.
Carolyn

IMac won't restart after latest security update

I have a late 2007 20" iMac with OS 10.10.2. While we were away last week I asked my son-ln-law to send me a photo off my iMac. He started the iMac and sent the file no problem. While he was on there he asked if he should run the security update while he checked the house so I said sure why not. He ran the update and came back in a few minutes and mac was off. He tried to restart it but it won't continue. It starts, the chime sounds, the Apple logo appears, it goes about 1/3 the way through the progress bar then sits there about 2 minutes and then shuts down. Trying to help with good intentions he found my Snow Leopard disk and inserted it thinking he might be able to use Disk Utility to eject the disk but since the disk is mounted an error message says the disk cannot be ejected. Not knowing what to do he just held the power button and it turned off.
Now that I'm back home I can't eject the SL disc and not sure what to do next. I've tried everything Kappy suggested here but nothing works. Unknown to my son-in-law I do have a Yosemite USB bootable drive but how do I run it with the SL disc in the DVD drive? I'm assuming I can restore from a time machine back up but with the SL disk in there does that cause a problem? I can see the Yosemite USB disk along with the SL disk in Disk Utility but not sure what to do if anything at this point. Suggestions?

Well I managed to get the Snow Leopard disk out and restarted the mac using OS X Recovery. I've selected the option to reinstall OS X. I'm at a screen that is asking me to 'Select the disk where you want to install OS X'. I'm presented two options one labeled 'EFI' and the other 'Recovery HD'. I chose the later but it's been sitting on a spinning beach ball for 30 minutes now so I can't select 'Install' to proceed. Any idea what has happened to my mac? A hard drive failure I assume or something else?

MacBook won't startup after latest security update

I Performed a Software update recommended security update this morning after backing up my Mac. It restarted and all was well, until I left this afternoon and then returned after my MacBook had gone to sleep. I attempted to wake it as usual, and the screen would not come back on. I forced it to shut down, and then restarted, but all I get is a white screen, then dark, no backlight, just nothing. I tried restarting in safe mode, resetting the PRAM, resetting the power manager, but all to no avail. I can get it to bong and light up with a forced restart, but nothing after that.
the MacBook was working perfectly before this update.
any thoughts as to what else I can do? I don't believe I have access to a startup disk To try.

Thanks for the advice, however, that startup command also provides no additional results. I've yet to find any key combination that advances the startup past the initial "bong", white screen to black/off.
The white "sleep" light stays on for a minute, then starts flashing as if sleeping. Only pressing the power button "wakes" it, but only the light stays solid for about a minute and then resumes. I must press and hold the power button to shut down the MacBook.
After about :10 last night I was holding the power button down well past the MacBook shutting down, then the "sleep" light flashed quickly and then the MacBook started up normally, as if nothing had happened. There was a dialogue box informing me the MacBook had shut down unexpectedly and Allowed me to send a report to Apple. Otherwise everything was normal. However, as soon as the MacBook went to sleep, I was unable to wake it again and I am back in the same boat I was before. I have not been able to reproduce the normal startup by holding down the power button either.
it appears the latest update may have totally screwed up the sleep process on my MacBook, or something related to that. Unfortunately, depending in the problem, it seems like I have no way to fix it myself now that Apple has moved to disk-less repair.

After latest security update my MacBook is not finding any network. My network is ok, iPad and iPhone have no problems, but laptop is for all practical purposes turned into typing machine. Has somebody encountered similar problem? What to do?

After latest security update my MacBook is not finding any network and I think is not really turning wifi on. Has anyone encountered similar problem?

Checked the older discussion of the same type and found solution, well kind of... Thanks to other people who tried it, I just cannot remember their names at the moment. So, the solution for me was to turn off the firewall in the system preferences and suddenly lo and behold there was my network.

Airtunes quit working after latest security update

My airtunes quit working after latest security update. Anyone else experience this problem?
In search of the fix, any help welcome.

Had to reset the Airport Express.

3G Clickwheel Ipod won't mount after update to ITunes 7.0

I recently updated to iTunes 7 and ever since my iPod won't mount. I can't see it on my desktop, and iTunes says the iPod is corrupt. I checked to make sure the Firewire port is working, and as far as I can tell, it is. I have tried to connect the iPod using both USB and Firewire, with the same result. I have also tried another Firewire cord, and that didn't work either.
I don't think the iPod is corrupt, because it was exactly after I updated to 7.0.1 that it stopped mounting. I thought 7.0.2 would resolve this issue, but it has not. The iPod works as it should when not connected to my computer.
I do NOT want to reload the iPod to factory settings, because over 1900 songs would be lost (my hard drive crashed last year, and this is the only place I have of many of these songs). This seems to be a known problem with the new version, but I don't know how to resolve it. Any suggestions?
iBook G4 Mac OS X (10.4.8)

I have the identical problem with my Ipod & Imac. I haven't updated my Ipod for awhile, and although it works just fine independently, once I plug it into either my Imac or Ibook, the computer will not recognize it so I can't add new songs.The ipod doesn't show up in ITunes, in System Profiler, Disk Utility. I'm using Itunes 7.02 and judging from some other newsgroups I have read, there are many Ipod owners with this problem. I hope Apple gets it fixed soon.
Imac G5 Mac OS X (10.4.3)

Powerbook G4 (OS X 10.4.11) won't boot up after latest security update

My G4 failed to reboot when restarted after latest security updtate.
The gray screen with apple logo and rotating gear stays on forever.
I tried booting in safe mode but same thing occurred.
I was able to boot in single user mode and run fsck -yf and it ran fine.
Then when I tried to boot again, same thing all over again.
I am guessing there must be some problems with new updates in the start-up folder or something. But I am not sure how to get rid of the files related to the new updates. Your help would be really appreciated. Oh, I was also able to run disk utilities application when I inserted Mac OS X installation dvd and booted from it. Then when I try to boot from HD, the same thing all over again...

I just spent a good 3 hrs or so trying to figure out why my imac running os x 10.4.11 wasn't rebooting after I downloaded the latest security update 2009-001. I finally got it running again after browsing the many helpful comments from past rebooting issues. Here are the steps:
1. On another computer, you'll have to download the security update that you believe froze your mac. In my case it was the 2009-001 update.
2. Save this file to a usb key, or in my case, to my LACIE backup drive.
3. Once downloaded, connect the USB key or backup drive to your mac.
4. Insert your install disc that came with your mac. (I installed disc 1)
5. Power down your mac. ( I did so by pressing and holding the power button on the back)
6. Press and hold the 'C' key on your keyboard as you restart your mac.
7. Let go of 'C' as the apple logo and spinning wheel come on. The start-up disc should start to run.
8. Choose your language.
9. At the top of your desktop you'll see 'Terminal'. Start it.
10. at the prompt, type "mount" to see a list of your volumes (in my case, the volume was LACIE).
11. type "find /Volumes/nameofyourUSB/*.dmg" Ex. "find /Volumes/LACIE/*.dmg" (This step will give the path of your update).
12. type "hdiutil attach /Volumes/nameofyourUSB/pathoftheupdate/SecUpd2009-001Intel.dmg" (Note the space after hdiutil AND attach)
13. type "/Volumes/Macintosh\ HD/usr/sbin/installer -pkg /Volumes/Security\ Update\ 2009-001/SecUpd2009-001Intel.pkg -target /Volumes/Macintosh\ HD" (Note the spaces again. Took me a few tries before I finally got it. If you get it right, you'll notice your hard-drive start to be active. Let it do it's thing before you exit Terminal.
14. Exit Terminal.
15. Go to 'Utilities' at the top of the desktop, select 'Startup Disk', and choose your OS (in my case, OS X 10.4.11).
Good luck!

IPad 2 won't rotate after latest iOS update

Why won't my iPad 2 screen rotate since the latest update to the iOS? It will sometimes rotate after several minutes but not always. I have done all the usual: checked the settings, side button, reset all, etc. I've had it a couple of years and this problem just started after the iOS update. I am ready to throw it away.

iPhone, iPad or iPod screen will not rotate, fix http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/
 Cheers, Tom

ITunes won't open after latest OSX update

AFter latest OSX update iTunes won't open. Reinstalled iTunes. Reinstalled OSX update. When I click on icon in applications or in finder nothing happens.

This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
This solved my question by Linc Davis.......
According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
First, back up all data.
Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
Click the iTunes link at the top of this page, download the installer package and run it.
If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS.

Mac Pro Won't Start After Installing Security Update Tonight

I just installed the latest security update for Lion on my Mac Pro via software update. The update seemed to install fine. I was about to start work when all of a sudden the system rebooted on its own. Now it just continues to reboot because it can't complete the boot up.
I tried resetting PRAM and SMC, but this didn't help.
I tried booting up from CD using an old SNL disk. I was able to get to disk tools once. I checked my startup volume and disk tools said the volumes is fine. I was checking permissions when once again the system rebooted on its own.
I tried starting up in safe mode, but it only gets so far into the boot process before it reboots.
I tried starting in verbose mode, and noticed several SMC related errors (this is why I tried to reset the SMC). No joy.
If I leave the system sit a few minutes, it gets further into the boot process, but still won't boot completely.
Any suggestions?

Mac Pro tower or MacBook Pro notebook? Which model?
If you are encountering kernel panics, check in the logs as suggested here and post a recent kernel panic log:
http://support.apple.com/kb/HT2546
Mac OS X: How to log a kernel panic

Kernel Panic After latest security update

Hello All!
I just recently reopened up my G4 to rip a few cds to my new 80gb iPod and I figured that Id do the security updates... bad choice . After applying the latest mac update it said it required a restart, after restating I was dumped into a Kernel Panic
panic(cpu 0 caller HEX): Unable to find driver for this plateform: "PowerMac3,6".
it then has a stack trace... Is there anyway to fix this? Thank you in advance!

Hi thanks for your reply I will try to type out the whole error message as it is displayed:
panic(cpu 0 caller 0x002E1904): Unable to find driver for this platform:"PowerMac3,6".
Latest stack backtrace for cpu 0:
backtrace:
0x000952D8 0x00026898 0x002E1904 0x002C0CE0 0x002C0AA8 0X002C1510 0x002C1B1C 0x000A9514
Proceeding back via exception chain:
Exception state (sv=0x00A44000)
PC=0x0000000; MSR=0x0000D030 DAR=0x00000000; DSISR (this continues on if you need the rest let me know)
Kernel version:
Darwin Kernel Version 8.9.0 Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
no debugger configured - dumping debug information
MSR =00001030
Latest stack backtrace for cpu 0:
(another backtrace again if you need it tell me)
Kernel version again
panic: We are hanging here...
I did find that first web site you linked to and I was trying to get into either safe mode or single user mode but I cant seem to get into either, this Kernel panic starts before I can get into either... I have not removed the harddrive yet and as per my tag I do have a 867 MDD somewhere in storage that I could go run and get and swap the harddrives out to see if it is perhaps a hardware issue? I have not attempted moving out the ram as I do not have any spare DDR laying around, however it is in a 2x512 configuration I will try swaping the sticks around. There is also a USB 2.0 card that is installed (however I never had it configured) I will also try removing that and reporting back. Thank you for your help.

Wireless keyboard doesn't work after latest security update

Hi,
I update MacOS 10.6.7 with latest security update and my wirelles keyboard is connected, but keys not work, capslock light doesn't change. I try charge battery, then I replace new battery, but it has no effect. I connect keyboard to another Mac with Leopard system and there's no problem... There's some solution? Thanks

Try repairing permissions with Applications -> Utilities -> Disk Utility.
There select First Aid. After that select the hard drive within Disk Utility's window. Finally click on the button that says Repair Permissions. A reboot may be necessary to finish the work when it is done.
Ignore any errors reported.

Flashing Folder with ? at startup - occurred after latest security update

Hi -
Looking for some help here. It may or may not be related to the latest security update to Safari and iTunes, but after updating these on my iMac and doing the required restart my computer had an odd "clicking" noise and struggled to open anything up. At one point, I just did a hard power off and turned it back on, only to have a white screen with a file folder with a question mark flashing at me. I looked through some other posts and tried - Command, Option, P, R - and it did a second restart and I had a working computer again - for now... I'm now trying to back every last piece of information up (haven't done that in a really long time!). I'm just wondering a) Why did this occur? b) How do I prevent or fix this for the future??
Any suggestions??
Thanks!

Hi Mary, and a warm welcome to the forums!
That means it can't find the startup Disk, usually due to pre-existing corruption before an update.
Hold the Option key down at startup, see if the HD shows as a choice.
If it still has problems "Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

External drive and ipod won't mount after latest security update

Similar Messages

Maybe you are looking for