External tab fileds getting populated

hi,
when i create an internal activity then the external tab fields get populated with the data for Cost Element,Purchasing Group,Purchase Organization.in the network profile setting i have not engterd any values for cost element.where could these values might be coming from?any  help....
shekhar

thanks a lot for all your inputs.the issue was resolved-there was one setting in Plant Maintenance "default values for task list data and profile assignemtns" where you can in turn maintain an External Profile and in this external profile the values defaulted had been maintained.the config settings are done for Plant and Order Type combination and there was one setting with all  the values defaulted ++++.that created the problem
thanks for all the concerns.
shekhar

Similar Messages

  • Infopackage-Data Selection Tab Values Get Populated Automatically.

    Hi All,
    In infopackage dataselection tab currently we are entering manually values for 0version info object and process has to be done for 4 differenct infopackagewe are getting a ticket for doing this process for every month.So 0version values would not be unique values ,all the values are different,for instancec10,c99,c11.
    user community felt that this one is a time consuming take they want to customize it and they want to enter the value on their own thorug some custom sap screen.
    we cannot give access to the user for the infopackage selection and all .we have figured out like we have to create a custom t code and give acces to the user for that t code alone.
    If the user enter the 0version value in the front end of it should get reflected in  infopackage dataselection tab.
    It would be really grateful if u have shared ur thought on the same.
    Regards,
    Sakthivel S

    Hi,
    You could use the TVARVC table instead of creating a Z-control table, and allow the users to enter the data into TVARVC via the tcode you are creating.
    So for instance the table entries could be as follows.
    NAME
    SIGN
    OPT
    LOW
    HIGH
    IP_1
    I
    EQ
    V1
    IP_2
    I
    BT
    V3
    V4
    IP_3
    I
    EQ
    V9
    Now, in the first InfoPackage, write the ABAP routine to read the data from TVARVC where the NAME = IP_1. Based on the results the InfoPackage restrictions will be populated by the routine. 
    In the second InfoPackage you read based on NAME = IP_2. And so on. Rest of the routine code is same as in the first InfoPackage.
    This way you can be assured that the different IPAKs will not have overlapping criteria as long as the table entries are correctly maintained.
    Regards,
    Suhas

  • History Tab Not Getting Populated

    As i Edit / inspect any assets in the WebCenter Sites the History Tab is not getting pouplated with the edited Assets. The Histroy Tab is visible to me, However there is no Data In it (Blank History Table).
    I am currently using java 1.7.0_03-b05.

    This is a known issue, bug 14341496. To avoid it please use java 1.6 on the browser.
    Phil

  • OVS value not getting populated in field

    Hi Experts,
    Kindly suggest me a solution for the below given issue.
    I have added three custom fileds to an already existing WD Coponent.
    And also added OVS help as an input help method to these fields.
    If I right click on the WD application and TEST, the application opens in browser and I am able to select the value from OVS list.
    If I run the application by copying the URL and paste it in the browser, or clicking on Portal link, if we select the value from OVS list that value is not getting populated in the field.
    Below is the logic I have written.
    method ON_OVS_PAYMENT .
    TYPES:   BEGIN OF ty_payment,
                 payment TYPE char4,
                 desc    TYPE char30,
               END OF ty_payment.
    * declare data structures for the fields to be displayed and
    * for the table columns of the selection list, if necessary
      types:
        begin of lty_stru_input,
    *   add fields for the display of your search input here
          payment type char4,
    *      desc    type string,
        end of lty_stru_input.
      types:
        begin of lty_stru_list,
    *   add fields for the selection list here
          payment type char4,
          desc    type char30,
        end of lty_stru_list.
      data: ls_search_input  type lty_stru_input,
            lt_select_list   type standard table of lty_stru_list,
            ls_text          type wdr_name_value,
            lt_label_texts   type wdr_name_value_list,
            lt_column_texts  type wdr_name_value_list,
            lv_window_title  type string,
            lv_group_header  type string,
            lv_payment       type string,
            lt_payment       TYPE TABLE OF ty_payment,
            ls_payment       TYPE ty_payment,
            lv_short         TYPE string,
            lv_table_header  type string.
      field-symbols: <ls_query_params> type lty_stru_input,
                     <ls_selection>    type lty_stru_list.
      case ovs_callback_object->phase_indicator.
        when if_wd_ovs=>co_phase_0.  "configuration phase, may be omitted
    *   in this phase you have the possibility to define the texts,
    *   if you do not want to use the defaults (DDIC-texts)
          ls_text-name = `PAYMENT`.  "must match a field name of search
          ls_text-value = `Terms of payment`. "wd_assist->get_text( `001` ).
          insert ls_text into table lt_label_texts.
          ls_text-name = `PAYMENT`.  "must match a field in list structure
          ls_text-value = `Terms of Payment`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ls_text-name = `DESC`.  "must match a field in list structure
          ls_text-value = `Description`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ovs_callback_object->set_configuration(
                    label_texts  = lt_label_texts
                    column_texts = lt_column_texts
                    group_header = lv_group_header
                    window_title = lv_window_title
                    table_header = lv_table_header
                    col_count    = 2
                    row_count    = 20 ).
        when if_wd_ovs=>co_phase_1.
          ovs_callback_object->context_element->get_static_attributes(
              importing static_attributes = ls_search_input ).
    *     pass the values to the OVS component
          ovs_callback_object->set_input_structure(
              input = ls_search_input ).
        when if_wd_ovs=>co_phase_2.
          if ovs_callback_object->query_parameters is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->query_parameters->*
                                  to <ls_query_params>.
          if not <ls_query_params> is assigned.
    ******** TODO exception handling
          endif.
    *     call business logic for a table of possible values
    *     lt_select_list = ???
          lv_short = <ls_query_params>-payment.
          CALL FUNCTION 'ZSIILESD001' DESTINATION 'LOGICALE22'
          EXPORTING
          i_payment             = lv_short
          TABLES
          ET_PAYMENT            = lt_payment.
        lt_select_list[] = lt_payment[].
          ovs_callback_object->set_output_table( output = lt_select_list ).
        when if_wd_ovs=>co_phase_3.
    *   apply result
          if ovs_callback_object->selection is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->selection->* to <ls_selection>.
          if <ls_selection> is assigned.
            ovs_callback_object->context_element->set_attribute(
                                   name  = `PAYMENT`
                                   value = <ls_selection>-payment ).
          endif.
      endcase.
    endmethod.

    Hi Pradeep,
    I don't think it really make any difference to the application run if we run from SE80 or run via application url.
    Try to set the external break point in OVS PHASE3 for your user. Check if the break point is reached and data is set after selection from OVS.
    Regards,
    Rama

  • Amount not getting populated in me21n

    hi,
    amount is not getting populated for the condition type in the conditions tab of me21n.

    Hi
    Have you maintained Info record with conditons? Please write in detail.
    regards
    Srinivas

  • XREF3 field not getting populated in BSEG table while posting MIRO

    Hi,
         I have one query in MIRO tcode.I have activated xref3 field in MIRO tcode using enhancement LMR1MF6Q.Now when i try to post document with some values in xref3 field on screen ,value is not getting populated in BSEG table.Please tell me what else needs to be done to achieve this ?
    any hint on this?
    Thanks & Regards,
    Soniya S.

    Hi,
    1.- According to SAP Note 904652 - MIRO: Different from FB60
    https://service.sap.com/sap/support/notes/904652
    MIRO is an independent Materials Management (MM) transaction that does not
    claim to be the same as the accounting transactions (such as FB60 or FB01).
    MIRO was developed to allow users to process vendor invoices within the
    context of the MM procurement processes as simply as possible.
    For this reason, among other differences, the field selection was limited
    to the absolutely necessary. For example, the following fields from the
    accounting document are not available in Transaction MIRO (this list is not
    complete):
    Reference key (BSEG-XREF1, -XREF 2, -XREF 3)
    2.- SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment
    https://service.sap.com/sap/support/notes/1156325
    Have a look at badi MRM_ITEM_CUSTFIELDS.
    This badi will create a new tab at item level in order to display the new fields.
    I haven´t used this badi so i cannot talk from experience here.
    Think twice before deciding.
    Best regards.

  • Taxcode not getting populated in MIRO Header in Dropdown

    Hi All,
    We created a new Taxcode through FTXP transaction for country and TAX schema and maintained condition records in FV11 transaction for relevant conditions.
    We created a PO with new tax code received goods.
    But while in transaction MIRO for LIV , new tax code is not getting populated at header in TAXCODE field.
    I have checked SDn for the same , they have specified OBTZ transaction for taxcode.
    I havent used this T.code in my previous assignments.
    Please throw some light on the same.
    With Regards,
    Vijaykumar P

    Hi All,
    Thaks for reply,
    But default tax code is maintained in OMR2.
    In MIRO transaction if we go to tax code tab and click Calculate Tax, the tax code in Basic data tab should get updated and all taxes has to be calculated correctly.
    But in this case the taxes are not calculated and taxcode is not appearing in dropdown also.
    Please do throw some light.
    With Regards,
    Vijaykumar P

  • I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

    I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
    Mike Moore
    Corvallis, Oregon

    mikem
    Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
    Under the Input tab, make sure that you have your microphone selected.
    Please let us know the outcome.
    Thank you.
    ATR

  • BBP_DOCUMENT_TAB does not get populated with shopping cart

    Hello Gurus,
    We are facing some weird issue out of blue. We have SRM 5.0 Classic scenario with ECC 6.0 backend system. We have everything configured and it was working i mean shopping carts were successfully transferring into ECC system as PR.
    Suddnely now we are getting error Item in transfer process for all the shopping carts. While checking into RZ20 monitor it shows following error " Backend application errors: Shopping cart  (PReq. 7000027359): W5 002 No items exist (not possible to save)".
    When we put debug in CLEAN_REQREQ_UP we found out that table BBP_DOCUMENT_TAB which should get populated whenever shopping cart is approved it not getting any data.
    Could you please let us know what could be the reason? As all the user IDs with which RFC's are maintained at SRM and ECC level active and all proper authorization are there.
    Please advise.
    Thanks
    Ritesh

    Hello Ritesh,
    Actually, the document tab is updated by the SC transfer (SC spooler). Each time the system starts the shopping cart transfer, an entry is created in BBP_DOCUMENT_TAB until the CLEAN_REQREQ_UP is executed.
    You could debug the shopping cart transfer and check if the follow-on document is being created.
    Also, you could check the SPRO customizing -> SRM SERVER -> Techcnical Basic Settings -> Set Control Parameters, and check its value.
    As additional information, you can check the note 1173815, which provides some information regarding the follow-on document creation (customizing tables).
    I hope it helps.
    Kind regards,
    Ricardo

  • Dynamic data not getting populated correctly

    Hello Experts,
                            I have a button on click of which, i m dynamically generating drop downs,In the same view i hav another button
    "CLOSE" on click of which i m navigating back to main view.
    Now the problem is ,when i select the second row from table of my main view and again when i m back to this view. the drop
    downs are getting populated which i genrated earlier.I don't want these dynamically generated drop downs to appears.
    I am using the method "REMOVE_CHILD_NODE" of the interface "IF_WD_CONTEXT_NODE_INFO"
    Any pointers rgding dis would be appreciated.
    rgds
    Sagar

    hello Sagar,
    u r dynamically generating dropdowns in ur view say VIEW1.U must be generating ur UI dropdowns on click of the button under a trnsparent container with a particular DROP DOWN INDEX ID .
    in ur onActionAdd method if u r generating drop downs with ID say DD101, DD102, DD103 and so on ...
    thn in ur close button , u need to use the method REMOVE_CHILD_NODE and try to remove the dropdowns with same index .
    u cn take reference of this code :
    DATA :
        DATA:
                lr_node_info     TYPE REF TO if_wd_context_node_info ,
                lr_node          TYPE REF TO if_wd_context_node,
                dd_indx_id       TYPE string .
    CONCATENATE lv_node wd_this->count_sysdel INTO lv_node.
            dd_indx_id = 'DD_1'.
            wd_this->count_sysdel = wd_this->count_sysdel + 1.
            wd_this->count_dd_sys = wd_this->count_dd_sys + 1.
            CONCATENATE dd_indx_id wd_this->count_dd_sys INTO dd_indx_id.
            lr_node = wd_context->get_child_node( name = lv_node ).
            lr_node->invalidate( ).
            CALL METHOD lr_node_info->remove_child_node
              EXPORTING
                name = lv_node.
            lo_drdwn = lo_container->remove_child( id = dd_indx_id ).
    here lv_node is the name of ur node , I am using count_sysdel of type NUM and concatenate statement
    to provide unique names to the generated node.
    u cn declare it under the attributes tab .
    u can have dd_indx_id = 'DD_1' and increment count each time using
    wd_this->count_dd_sys  which is another counter .
    do revert back if u need any assitance ,it shud help .
    rgds,
    amit

  • How suggested buyer id gets populated in requisition lines

    How suggested buyer id gets populated in requisition lines when we select the external catalog? Where we need to do the setup? Please suggest.

    Sorry, I have misguided you a little.
    You can do that using POR_CUSTOM_PKG client extension provided by Oracle for iProcurement.
    Assign the suggested buyer value in the line defaults function.
    Thanks,
    PS.

  • Field in ALV not getting populated

    Hi all,
               I need some help. I am displaying an ALV with fields.
        GROUP     G/L ACCOUNT     Local currency       USD     Period
           100              10                       5                       5           12
           100               11                      6                       4            12
      now i have added an extra field TXT20 in the as last field of structure
        GROUP     G/L ACCOUNT     Local currency       USD     Period      TXT
           100              10                       5                       5           12          aa
           100               11                      6                       4            12         ab
    TXT should come as 3rd coloumn in the output.
    EXAMPLE:
         GROUP     G/L ACCOUNT       TXT      Local currency  USD     Period     
           100              10                      aa                  5              5           12         
           100               11                     ab                   6             4            12        
    I have changed the coloumn positions in the field catalog accordingly and I have not written or changed any select queries from earlier output.
    now my problem is PERIOD field is not getting populated in the ALv,the data is visible in the IT_FINAL which I am passing to Reuse_alv_grid_display. the field catalog is also getting build properly.
    so plz suggest some changes so that I can move ahead.

    Hi
      I don't know what's the reason and now I have no environment to test it, but you can try other way:
      1. define your fieldcate one by one as the sequence of your output like
          GROUP         G/L ACCOUNT          TXT           Local currency         USD          Period
          In this situation, you needn't use component -- position of fieldcate structure. Pay attention to
          fieldname in upper case.
       2. If only doing step1 has no effect, then adjust your structure of internal table. Sequence your
           component of IT_FINAL as the output field like step1.
       If still no effect, please let me know.

  • IS Retail - Inventory - Retail price BWGV0 is not getting populated

    Hi ,
    We have activated IS retail industry specific indicator in SBIW. Fo some reason when I do RSA3 in '2LIS_03_BF' , all the stock movements are displayed but the retial price field BWGV0 is not getting populated. Do you guys have come across this situation ? Please let me know.
    Thanks
    Hareesh

    Some documents below might worth taking look..
    Process key logic for MM inventory can be found in OSS note 492828
    Logic for MM purchasing can be found in note 684465
    Activating the process key logic in R/3 for MM should be as simple as setting the correct industry in MCB_ (also found under SBIW), but if it doesn't work look at OSS note 353042. In the end haveto use trans BF11 to add an entry to a table, even though the plugin is 2003.1 on R/3 4.6C.
    352344
    492828 Determining the transaction key for 2LIS_03_BF + 2LIS_03_UM
    Hope it Helps
    Chetan
    @CP..
    Hope it Helps
    Chetan
    @CP..

  • Warranty tab not getting displayed in service order

    DEAR ALL,
    I have an issue with crm services, I HAVE NOT ACTIVATED/USED INSTALL BASE IN MY SCENARIO AND HAVE CREATED PRODUCTS DIRECTLY/ DOWNLOADING FROM R/3.
    NOW WHEN I MAKE A SERVICE ORDER THEN WHEN I ENTER THE PRODUCT (EG: FINISHGED GOOD) ITEM CATEGORY BEING YANN (TEXT ITEM CREATED BY US) THEN THE WARRANTY TAB IS NOT COMING UP.
    when we add an expense item in the next line item warranty tab is getting displayed.
    KINDLY HELP.
    REGARDS,
    AMIT

    Hi for this u can use VCT but you to check for doc flow action settings and work flow before, then only you will get Guranty Data tab hope this will helpful
    Regards
    Venkat

  • Users details not getting populated in the portal tables..

    Hi,
    We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
    Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

    You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
    Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

Maybe you are looking for