External transfer of PR ( PDP Scenario ) : Interface data contains errors

Dear All,
We are in SRM Server 5.5, Extended Classic.
Scenario >> Plan driven procurement
We have a purchase requisition generated via Plant Maintenence order. The PR is created for services and also has limits maintained ( overall and expected value ).
The PR is not getting transfered to the SRM. However in SRM SLG1 we see error log :
Interface data contains errors
Message no. BBP_PD002
Please advice if you have faced similar issue.
Regards,
Anil Rajpal

Hello,
You can debug the PR transfer to find out why this error is coming.
1. Go to table EPRTRANS -> take the PREQ number.
2. Go to SE38 -> BBP_EXTREQ_TRANSFER -> F8 -> provide PREQ -> /h -> F8.
3. Go inside FM BBP_EXTREQ_TRANSFER ->
4. Go inside perform transfer_package ->
5. Go inside Perfrorm Send_pr_to_procsystem ->
6. Clear lv_qrfc = '' -> goto inside FM BBP_BC_EXTREQ_INB -> Here SRM will be called (maintain the RFC connection with dialog user. Then it will be able to debug onto SRM side).
Once logged onto SRM, put a breakpoint at FM BBP_PD_MSG_ADD. Here error will be triggered. If you go back some steps via call stack, you can see why this error appears.
Regards,
Ricardo

Similar Messages

Error in using BAPI_CONFEC_CREATE : Interface data contains Errors

Hi,
I am using this BAPI BAPI_CONFEC_CREATE to create confirmations locally in SRM for a PO. I am following Documentation available for this BAPI. But when I excuted with below data getting error " INTERFACE DATA CONTAINS ERRORS"
I am passing these data:
Hedaer: Ref_doc_no - PO Number
              Description:
             Process Type: "CONF"
Header_cust: parent_guid : PO GUID
Item: Parent: PO Header GUID
        PO Number: PO number
        PO GUID: PO HEDAER GUD
        PO ITEM Number: PO item Number
       PO_ITEM_GUID: po item guid
Account:
               Parent_GUID : PO Item GUID
               G/L acct : Po G/l acct
               cost center : PO cost center
what are the data sholud be passed to this BAPI?
Am I missing any input data to this BAPI? Please let me know.
Am I using correct Function Module to create a confirmation for a PO in Stand alone scenario?
Thanks.
Shears
Edited by: Shears80 on Sep 10, 2010 1:39 AM

Hi Matt
I'm using the same FM but it's not working. Can you please share what data you are passing in the FM.
After debugging I found that my confirmation is getting created but it's not getting saved.
Please enlighten me.
Thanks
Ankit

BBPCF02 - BBP_PD002 Interface data contains errors

Hi all,
I need your help.
We have a problem when the user confirm a purchase order from transaction BBPCF02.
During the creation of confirmation the system returns the pop-up with message "Interface data contains errors".
I have SRM 5.0 classic scenario.
Thanks in advance.
Davide

refer to note 805965. Although this note is not exactly for the problem you are stating but it should be close enough to solve your problem.

Interface data contains errors

Dear all,
We are on SRM 7.0. When trying to create a purchase order from an accepted bid the following error appears:
"interface data contains error", no more details shown.
It happens with both buttons: "Create Purchase Order" and "Simulate and create purchase order".
Any ideas to solve it?
Thanks
Ezequiel

Hi Eze
purely no range issue
create purchase order from bid invitation
Standard process for PO creation from Bid Invitation or Bid
double confirmed. revisit your Bid invitation , bid and Po number ranges.
br
muthu

Interface data contains error

Hi Expert,
We're facing error 'interface data contains error' when generate Purchase Order for bid submitted by bidder.
anyone has experience with this error?
Thanks,
Yusup

Hi
Please refer this note 1042490 - Interface Data contains Errors in the sourcing cockpit.
This note might be useful for you.
Muthu

Interface data contains errors while submitting the Bid by vendor

Hi
This is with regard to strategic sourcing. Purchaser carried out a sourcing with start date 05.03.2010 and end date as 10.03.2010. Now the vendor is trying to create his bid by selecting "Process Bid" option. Vendor is getting Bid invitation no, to create a Bid. Here while submitting he is getting the error as " End date has been reached. The submission deadline has passed", eventhough the end date is 10.03.2010. And getting a message "Interface data contains errors". So he is not able to submit the bid. For all the bid invitation vendor is getting this problem.
How to resolve this?
Thanks

Hi Muthu
Thanks for ur response. It was a no range problem which I found & rectified.
Regds

Bid Response : Interface data contains errors

Hi Gurus
We have created a bid invitation ,the worflow is set on Without Approval . We are trying to create a bid response , after maintaining the bid , we select check and get the error " Interface data contains errors"
Does anyone know how to go about resolving this

Hi,
Have you implemented any BADI in your system?If yes,please check whether it is properly activated or not.The error log is due to the improper implementation of some badi.
for the time-being,
Try de-activating all the custom BADI Implementations and chek, what is happening, in the standard SRM system.
BR,
Disha.
Do reward points for useful answers.

I have bought a time capsule to use as time machine device. Until now I have used a external hard disk. How can I transfer the the old time machine datas to the time capsule?

I have bought a time capsule to use as time machine device. Until now I have used a external hard disk. How can I transfer the the old time machine datas to the time capsule?

This is really difficult to the point of not really worth it.
Keep the old TM backups in archive.. and start afresh on the TC.
Time Machine has a different way of backing up on Network drives cf Local drives.
Pondini does have a method to do it... but I would not recommend it.
http://pondini.org/TM/18.html

Direct material procurement in PDP scenario for classic mode

Dear Gurus,
We have configured classic scenario in our SRM 7.01 with backend system ECC 6.0 Enhpk 5. We have PDP scenario for direct material as one of the requirement. The requirement generated in MRP in the ECC backend system will be sent to SRM SOCO for sourcing. Once the right source of supply is found, the follow-on purchase order needs to be created in the ECC backend system in direct material mode.
However, the SAP SRM standard supports only indirect material procurement in PDP scneario for classic mode. How to enable the direct material procurement? Could you suggest any BAdi to be used here?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hello,
You need to activate the Bsdi 'ME_REQ_SOURCING_CUST' for transferring the purchase requisitions from ERP to SAP SRM.
Some details about the method involved for the same are mentioned below :
Mehtod : IF_EX_ME_REQ_SOURCE_CUST~ACTIVE
->when parameter CV_AUT_SOURCING is set to true, external sourcing (e.g. SRM system) is active in ERP system
->when parameter CV_EXT_RFX_IND is set to true, RFx can be created out of PR directly from ERP system using application CPPR
->when parameter CV_EXT_SC_IND is set to true, PR in ERP system will be transferred to SRM using application CPPR
Method b. IF_EX_ME_REQ_SOURCE_CUST~CHECK_EXTERNAL_SOURCE
Here you need to maintain the logic / condition for which PR has to be transfered to SOCO.
Example
IF ( is_req_item-ekgrp = 'SRM' AND is_req_item-matkl = '100' )
cv_ext_sourcing = cl_mmpur_constants=>yes.
ENDIF.
When this BADI is active whenever you save a PR with say the purchasing group as SRM and material group is 100 (as per sample code above), system automatically triggers the PR transfer from ERP to SRM by xml's.
Best Regards,
Rahul

Approval for SC created through ECC PR in PDP scenario

Hi All,
We are implementing SRM 7.13 and have enable PDP scenario without PI.As per standard configuration SRM SC is created in APPROVED status and is available in SOCO for buyer. In our case we have a requirement that SC should be created in Awaiting Approval and follow the Approval process.
Please share your exeperience and let me know the object we have to customized for this.
Thanks,
Ankur

Hi ankur
You would have to do the customization for this in your system
BADI ME_REQ_SOURCING_CUST holds the logic for the PR transfer to SRM.
You may refer to the link below in all these and confirm .
http://help.sap.com/saphelp_srm40/helpdata/en/99/8afc524b07574fa215b32f1da9ddd4/content.htm
http://scn.sap.com/thread/324350
http://scn.sap.com/thread/1625682
http://scn.sap.com/thread/1608535
I am also pasting a link below and you should check the same it would be helpful much in achieving what you need .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5082a622-7310-2c10-1a9b-ef31dd69a770?quicklink=index&…

SRM 7.0 with PDP scenario

Dear Experts,
In SRM 7.0 with PDP scenario which BADI should be used in order to replace the RFC user to the original requestor ?
Thanks and Regards,
Venkata Koppisetti.

Hi Manjunat
His requirement is very clear.
All the PDP scenarion PR converted to shopping cart - good recipient as a RFC user but he wanted to transfer really who created a request in ECC ( if venkat created a PR means VENKAT name shown as Good recipient). I think this is one of crucial request most BUYER requirement since BUYER has to see who really created this request if any clarification of the request BUYER needs to refer backend system as well. this creates some conflict on auditing as well.otherwise BUYER has to refer Purchase request and needs to log in ECC who created this request .Buyer community wants to work only in Web front end not with stone age Dialog screens.

HKONG: Material Transaction Interface 의 data를 처리 Process들에 대한 정의

PURPOSE
Material Transaction Interface 의 data를 처리 Process들에 대해 정의하고자 함.
Explanation
관련된 정보는 다음과 같습니다.
Material Transaction Interface 의 data를 처리하기 위해서는 다음의 2개의 Process가 수행됩니다.
- INCTCM (Process transaction Interface)
- INCTCW (Inventory transactions worker)
(1)
Records are processed into this table by the INCTCM - Process Transactions Interface from the Interface tables :
     MTL_TRANSACTIONS_INTERFACE     to MTL_MATERIAL_TRANSACTIONS_TEMP
     MTL_TRANSACTION_LOTS_INTERFACE     to MTL_TRANSACTION_LOTS_TEMP (Lot 사용시)
     MTL_SERIAL_NUMBERS_INTERFACE     to MTL_SERIAL_NUMBERS_TEMP (serial 사용시)
==> INCTCM 에 의해 interface table의 data가 validation후, temp table로 옮겨집니다.
(2)
After the records are processed from the MTL_TRANSACTIONS_INTERFACE into the MTL_MATERIAL_TRANSACTIONS_TEMP
by the INCTCM - Process Transactions Interface,
a worker will be launched to process the record from MTL_MATERIAL_TRANSACTIONS_TEMP into MTL_MATERIAL_TRANSACTIONS.
The worker is called INCTCW - Inventory Transaction Worker.
The INCTCM - Process Transactions Interface will launch a single INCTCW - Inventory Transaction Worker for all rows
that meet the criteria in MTL_MATERIAL_TRANSACTIONS_TEMP :
     TRANSACTION_MODE     = 3
     LOCK_FLAG          = N
     PROCESS_FLAG          = Y
Once the process is complete the records will be moved into the corresponding
transaction table :
     MTL_MATERIAL_TRANSACTIONS_TEMP     to MTL_MATERIAL_TRANSACTIONS
     MTL_TRANSACTION_LOTS_TEMP     to MTL_TRANSACTION_LOT_NUMBERS
     MTL_SERIAL_NUMBERS_TEMP          to MTL_UNIT_TRANSACTIONS
==> INCTCM은 INCTCW를 call하게 되고, 이 Process에 의해 TEMP table로부터 MMT table과 Inventory table에
DATA가 Insert됩니다.
The rows in mtl_transactions_interface are processed in 5 phases.
1. Derives dependant columns, eg:acct_period_id, primary_quantity etc..
2. Detailed validation performed on the records
3. On hand qty check for negative qty's etc..
4. Reservations Relieved if demand was created in order entry
5. Rows are moved to mtl_material_transactions_temp where the
transaction processor is called to process these rows and update the inventory levels etc..
Reference Documents
-------------------

How to convert NTFS external hard drive to FAT32 without loosing data?

New mac user. How to convert NTFS external hard drive to FAT32 without loosing data?

You have to off load and backup then.
don't have backup drive ?
Get one.
Want another option? Paragon NTFS for OS X will provide write function to your drive, works with the most PC cases and drives (not all NTFS drivers for OS X do) and does so with fast I/O and low overhead.
Not sure about using Seagate GoFlex as I seem to recall a number of threads reporting problems.
Windows can do a convert -fs to NTFS just never tried the reverse from NTFS to FAT32 but I would not use FAT. I'd either erase and reload and use as Mac HFS Extended; or if you actually do need to use it with a PC user running Windows, the driver would be handy and better.
Or your PC w/ Windows there are HFS drivers for Windows to mount and WRITE to a Mac formatted drive under Windows. There MacDrive has more and better support feature set.

I bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4?

i bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4? that means, making the iphone 4 just like the iphone 3gs?

Well, you sink everything on your 3GS onto your laptop/computer. Then you reset your iPhone 4. When you are restarting it, add all those apps music (ect) On to it. It seems difucult but for more info call Apple. I did that and he lead me step by step on how to do it. Well hope this helped~~

Read EDI-856 interface data in ABAP program

HI Experts,
I have a requirement to read the incomming EDI-856 interface data from ABAP program and generate an IDOC. I have gone through few EDI-856 documents and theformat in which to read the data .
Request you to let me know the code logic , function module to use or if you have any document which can help me in the development.
Thanks in advance
Regards
Santosh

Please help regarding
First could you please help me regarding the SCN search option?
please always try to attempt from your side if not able to solve than search in SDN finally you may land on SDN with thread.

External transfer of PR ( PDP Scenario ) : Interface data contains errors

Similar Messages

Maybe you are looking for