Extra field for Customer Changing DEBMAS

Dear all,
Currently we using program RBDMIDOC to trigger changed customer (XD02) info. to Message Type DEBMAS IDOC to customer system.
But we only need to send some of changed customer field from table KNA1 to customer system.
And also some fields that DEBMAS is not provided such as table ADRC and T005T customer related fields.
For this situation, is it need to create new customise IDOC for the fields need or is there any existed solutions.
If for new customise idoc, how to generate during DEBMAS idoc creation and how to get the data from DEBMAS idoc, can you kindly show the steps and method...
Thank you.
Regards,
Weng

Dear Ramesh,
Appreciate for your reply, it is very useful info. I am newbie in IDOC, can you show me the step to attach extended idoc for DEBMAS  (i has been created the extended idoc) and how the user exit do, or is there got any tutorial/blog for this extended idoc.
Thank you.
Regards,
Weng
Edited by: Weng on Sep 30, 2009 4:02 AM

Similar Messages

  • Open field for customer line item

    Hi Guru
      I have some problem about open field for customer line item  post with posting key 09 and special GL , I open field at posting key 09 but the field still hidden  . How I can open field for used . Thank you

    Dear,
    Use transaction FBL5N and select Special G/L Transactions only and execute.....here bring posting key and filter the posting with 09.
    REgards,
    Chintan Joshi

  • Marriage anniversary date field for customer contact

    Hi
    We like to have Marriage anniversary date field for customer contact.
    We found Birthday field & even Marital Status in Customer Contact. However, Marriage Anniversary Date is missing.
    Please suggest whether it is already avalible somewhere? If yes, how to get it (in XD01/XD02), or what is the alternative then.
    Thanks.
    - Sunil

    Hi,
       I don't think SAP has provided marriage anniversary field , you can very well user REMARKS field to enter the details.
    Regards,
    Siraj

  • Transaction for Customer changes

    Hi,
    Did we have any specific T-code to view Customer changes, Which will show all the changes happened as on date.
    and also i found 2 tables for customer changes.
    FD15                   Transfer customer changes: send
    FD16                   Transfer customer changes: receive
    What is the difference between FD15 and FD16.
    Thanks.
    Pardha

    customer changes can be viewed through OV51 or S_ALR_87012182.  they're both the same except the latter can be found in the FI nodes. 
    you use FD15 to create a customer in another company code, which already exists in a different company code.  the result of this transaction is a file that you use to receive using FD16.
    regards.

  • Creation of extra field in customer master.

    Hi All,
    I have a requirement where i need to create one extra field.
    We intend to capture taluka for each distributor. This will give us micro level detail. We can start analyzing sale at taluka level.Therefore we believe this additional field will be important.
    Kindly provide your valuable solutions to achieve this.Thanks in advance.
    Thanks,
    Pavan.

    Hi Pavan,
    Rather adding an Extra Field(if your requirement "Taluka" is only for information or statical purpose) you can go with charecterstics and classification.
    In my Client Business, the requirement was to add the " Sales Group's" mobile number and Email id in customer master, so that they can a have report where they easily findout the phone number and mail id for the each sales group. so i have acheived this through Charecterstics.
    Screenshot for your Reference:
    This would be also an option.
    Regards
    Kamal

  • How to use Resever Field for Customer Master

    Hi
    My Client Requirement. Price should be determine with Sales ORG, Distribution channel, Division, Districts, Talukas and Villages.
    But Talukas and villages are not available in SAP standard systems.
    Is it possible to use reserver field in Customer Master for this purpose?
    If it is ok then please give suggestion how to use this reserve fields.
    Thanks in Advance
    Madhu

    Hello,
    the system-behavior that you describe is standard behaviour, because   
    the fields which you are describe (village and ..) doesn't exist in structure KOMG.                                                                               
    For using this field in the field catalog you can proceed like this:   
    1. create a new field for example ZZvillage...                             
    2. add the new field in the table T681F for the application 'V' and the
       usage 'A'                                                           
    3. add the field to the include-structure KOMKAZ                       
    4. fill the new fields in the userexit for pricing                     
       (Pricing_Prepare_TKOMK (TKOMP)                                                                               
    I hope that the information are helpful for you.    
    regards
    Claudia

  • Adding an extra field in customer statement report

    Dear all,
    We are on SAP B1 2007 PL42. How can we add an extra field eg a UDF on a customer statement in PLD? The system's customer statement have all fields as "free Text".
    Kind Regards,
    Asif

    Hi,
    I have created a free text field in PLD- named Field_101. I have also created a database field from the OINV table and referenced to the UDF "U_FileNo" named Field_102.  On field_101 I have linked to Field_102 but on previewing the report the field is empty/blank.
    Thanks
    Asif

  • Description for value help field for custom infotype field

    Hi,
       I`ve got to include a field in custom infotype. This field has got a value help attached to it. The values to be displayed in the value help are stored in the domain of the field(in the dictionary).
    The requirement is that once I select a value from the F4 help, the description for that value should be fetched and be dispalyed on the screen.
      I`m using the FM "<b>AM_READ_TEXT_ON_DOMAIN_VALUE</b>" to read the description from the domain ,but unable to make it display it on the screen.
      Can anyone suggest me as what should I do for displaying the description in the custom infotype screen.
    Regards,
    Farhana

    Hi anji,
       While using the "GET_DOMAIN_VALUES", I do get all the values from the domain. But I want only description to be displayed when I select a Value for that field.Kindly help out..
    Eg:
    1-Individual
    2-Family
    Then the description should be displayed as Family when I select the value 2 from the value help.
    Regards,
    Farhana.

  • Customer Master Field for Customer Category

    Hi Experts,
    Are there any fields available for Customer Master Field for maintaince in the Customer - Basic Data Level? This is to Categorize the Customers regarding the Sales Report we customized.
    Thanks a lot!

    Hi,
    Use field Customer class/Industry sectors in MARKETING TAB under general data
    or use customer group in sales tab under sales area data
    kapil

  • Complete List of Error Codes for Customized Change Password Page

    Hi,
    does anyone has a complete list of "Change Password Page Error Codes"?
    The list provided in the document:
    Oracle® Application Server Single Sign-On Administrator's Guide
    10g (9.0.4)
    Part Number B10851-01
    seems to be incomplete. (See: http://download-uk.oracle.com/docs/cd/B10464_01/manage.904/b10851/custom.htm#1009955 )
    I found at least three additional / different error codes:
    auth_fail_err
    pwd_minlength_err
    pwd_numeric_err
    I'm using a JSP Page.
    Thanks for help

    Hi,
    I found the list in the OID Admin Documentation. The list contains the error messages the OID sends to the client. In case of SSO, the client for the OID is the SSO server. So now I know which errors are transmitted to the server, I have to find out what the server sends to the SSO Page for Password change. Probably I should test all cases documented in the OID Admin doc to find the appropriate values for SSO Server.
    Thanks for the tip

  • How does one create LOV Map between 2 fields for custom lookup mapping

    Hi there
    In Internet Expenses, Expense Report Line Detail we have two unrelated fields; namely Expense Location & Tax Code.
    The requirement is to map a default tax code to locations; basically when a user enters Expense Location then the mapped tax code value should default into field Tax Code.
    The location-tax code mapping is stored in a custom lookup (FND_LOOKUP_VALUES).
    My question is how does one go about implementing this?  For example is it possbile to create a new (hidden) LOV based on the lookup mapping & then create a Personalization LOV Mapping between the 3 LOV...  Or is it necessary to modify the Tax Code drop down Message Choice in JDeveloper?  Of course details are appreciated!
    FYI below is the relevant Personalization Structure from "Personalize Stack Layout: (NormalDetails)".
    Message Lov Input: Expense Location
    - Lov Mappings
    -- Lov Map: (lovMap1)
    -- Lov Map: (lovMap2)
    -- Lov Map: (lovMap3)
    - Message Text Input: Expense Location
    - Message Styled Text: Transaction Location
    - Message Text Input: Merchant Name Yes
    - Message Styled Text: Description
    - Message Check Box: Original Receipt Missing Yes
    - Message Choice: Tax Code
    - Message Check Box: Amount Includes Tax
    - Message Choice: Tax Code
    Many thanks
    G

    Hello all
    The correct & supported method is this:
    Extend the location LOV in JDeveloper & add a "default tax" attribute, this could be derived from a new location DFF storing the default tax code for each location. Now simply create a location Personalization LOV Map which takes this new location lov tax attribute & target it to the tax message choice field.
    That's my 2c worth anyway, so please give comment if you feel there is a better way.
    There is just one more little problem however... The requirement has changed! Now we require the tax code to default according to not one location field, but other fields too. For example if the user selects Expense Type of Beverage & Location of Netherlands then Tax Code should be NL19%, for Expense Type of Hotel then it should be NL6%; if the user ticks "Missing Receipt" field then it should over ride all others & set the code to NL0%.
    Any ideas?
    Many thanks
    G
    Edited by: user13363208 on 11-Aug-2010 06:51

  • SMOEAC-Filter for Customer Changes not to replicate from CRM to R/3

    Hi,
    We have 4 subscriptions in SMOEAC for CRM to R/3 replication. They are
    1.ALL BUSINESS PARTNERS
    2.ALL BUSINESS PARTNERS RELATIONSHIPS
    3.ALL BUSINESS PARTNERS HIERARCHIES
    4.SALES DOCUMENT ECC.
    In the business partners, Now we need to put filter to avoid flow of Customer Master data changes (to R/3) done in CRM.
    Iam seeing information in forums that we can able to do that by changing the publication type from Simple Bulk(MSG) to Simple Intelligent(MSG).But Iam not able to change it for ALL BUSINESS PARTNERS in transaction SMOEAC.
    pl advice on the possibility.
    Regards
    A.Sureshbabu.

    Hello,
    Assuming X is the replication object.
    1. Remove all the sites assigned current bulk X object. Check the REALIGN and SUBCHECK queues in Tx: SMOHQUEUE and make sure that all jobs triggered due to this removal are complete.
    2. Delete the subscription for bulk X.
    3. Delete the publication for bulk X.
    4. Delete the existing bulk X object.
    5. Create a Replication Object (Intelligent) for BDoc type X with Criterial Field selected.
    6. Create a Publication for the Replication Object above.
    7. Create a Subscription for the Publication and set the Criteria Value.
    Please note the subscriptions corresponding to the replication object must be deleted from ALL clients of the server.
    Hope that helps.
    Thanks,
    Rohit

  • TCode CHARM_CREATE for customized change request ZDCR?

    Hi,
      Q1. is there a way to configure the ChaRM system for the CHARM_CREATE transaction to target  a customized ZDCR transaction type?
      Q2. is there a way to copy the CHARM_CREATE transaction code to the customer namespace(Z*)  and  then alter it to target the customized ZDCR transaction type?
    Grateful for any assist from ChaRM gurus on these questions ... I am getting much joy with successes in customizing ChaRM for our requirements. We have copied SDCR & other standard tranactions, status, texts etc. With customized ZDCR transaction type & new precesses, actions, conditions etc. we have got a customer specific process flow with e-mails that we are happy with.   (This is on SolMan 7.0 SP25).
    I would like to have the "enjoySAP" type of fast transaction entry screen like CHARM_CREATE.
    The CHARM_CREATE transaction brings up a popup which creates a change request that targets the  standard SDCR transaction type.  The fields given for fast entry are those from SDCR (Not my customized ZDCR) and at completion of the CHARM_CREATE transaction entry,  the change request is of transaction type SDCR.
    At transaction DNO_CUST04, we have tried to edit the parameter with field name "CHANGE_REQUEST" sequence "1" and given new value "ZDCR". The CHARM_CREATE enjoySAP transaction still nevertheless targets the standard SDCR transaction type.
    Have phished oceans of blog and rivers of SAP SSM webpages to no avail and I'm still clueless. Will give good points for a hint?
    tnx,
    Steve A

    Hello Mr. Amorsen,
    Follow Charm_create step by step using customer name:
    1- Create a new transaction using t_code SE93 (E.g.: ZCHARM_CREATE )
    2 - Copy the program : CHANGE_REQUEST_CREATE_SOCM to Z using SE38
    3 - In SE93, change the program to Z created in step before
    4 - In SE80 Copy the function group Change-request_socm to Z
    5 - copy the function modules too (will appear a pop-up asking for this)
    6 - Change  the include ; LZCHANGE_REQUEST_SOCMTOP
         IN LINE 30 : gc_processtype(4) TYPE c
                VALUE 'ZDCR',  "process type for change request
         Change value to ZDCR
    7 - Activate all
    8 - In SE38 report: ZCHANGE_REQUEST_CREATE_SOCM , change the call function SOCM_CHANGE_REQUEST_CREATE to Z
    9 - activate.
    Done !!!
    <<text removed>>
    Regards
    Claudenir Bispo
    Edited by: Matt on Oct 5, 2011 9:39 AM

  • Need to add extra fields in Custom tab  using EEWB.

    hi ,
    I extended business partner with 10 custom fields using EEWB by creating an custom tab. I would like to add 2 more fields in the same custom tab . I am unable to find the provision to add new field to the existing project. so i am deleting the existing project and creating new project and adding all the =and new fields.
    Now when I am creating new project  i am loosing the old field names. It creating the new fields with new field names.
    My requirement is I should create a new fields without changing the old field names.
    So Please can any one help me as how to approach these without deletion or changing the existing field names.
    Finally my custom tab should contain 12 fields.
    Thanks
    viswa

    Hi viswa,
    I have a requirement to add 2 new fields to the Standard Transaction (called <b>BP</b> ).
    I have gone through various concepts like <b>EEWB and BDT</b> tools. But, still I am not able to get the things well.
    So please provide me with the procedure to explore things and work on the requirement.
    Thanks in advance.
    Regards,
    Vishnu.

  • Can I create a PDF form with a field for adding/changing Photos?

    Does anyone have a solution to the following problem?
    I would like to be able to make a PDF form that others in the office can use to fill in a particular inventory and model number.  (Fields, Easy)
    Then have a field where they can replace the PHOTO of the item referred to by the inventory and model number.
    Is this possible using Acrobat professional? Can the document then be saved as, or exported somehow from there?
    I know this is probabably easy to do in Word, but can a photo be changed on a PDF and saved as?
    Thanks for any help or suggestions!
    DaddyOfZed

    It will make it possible for them to select a new photo. Will you ever want to extract the photo from the form to be used elsewhere?
    In order to set this up in Acrobat, you can create a button to display the image, set its layout to something other than "Label only", and add the following JavaScript to the Mouse Up action:
    // Prompt user to select an image
    event.target.buttonImportIcon();
    For the PC users, Acrobat Standard is sufficient for this.

Maybe you are looking for