Extra Selection mask in HCM Reporting WebDynpro

Hi SAP Experts,
we integrate a new SAP Standard Report in our Report Scenario in Portal.But when we select a organizational unit in step 2 this selection seems to be ignored by the system. In the next step we get the standard sap report selection mask. When we type in the same organizational unit as we select before the report starts running.
Does anybody know why the system is gving this extra step? Does anybody know how to avoid this
Report: RHHCP_PLAN_LIST_RESULTS
web dynpro: com.sap.pct.erp.mss.reporting
Best Regards,
Nadin Schaa

Hi Andreas,
Our problem was because of the different database. So we needed to use a second program (with PCH database) that is called by the portal and that executes the required report - when you want to use a variant both - report and program should use the same variant-name:
REPORT SECOND_PROGRAM MESSAGE-ID 5A NO STANDARD PAGE HEADING.
TABLES: objec.
PARAMETERS: VARIANTE     TYPE SELSET.
START-OF-SELECTION.
GET OBJEC.
END-OF-SELECTION.
SUBMIT REQUIRED_REPORT_NAME
         USING SELECTION-SET VARIANTE
          WITH PCHOBJID IN PCHOBJID.
I hope this will help you, too.
Best Regards,
Nadin

Similar Messages

Difficulty in adding new parameter in selection screen of GR55 report

Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
Meenakshi

Hi meenakshi239,
you can always use implicit enhancement spots.
Regards,
Clemens

HCM Reporting

Hi SAP Experts,
we use HCM Reports in Enterprise Portal. For the Reports we used until now the functionality of this tool was sufficient but now we have some new requirements.
We want to execute a report via HCM Reporting tool with a fix variant - with the standard settings we first get the selection view - this step should be prevented.
The behavior of the reports should be different in different cases. So Report A should show the selection views - Report B should give back the result list immediately .
So does anybody have a approaches or a solution?
Kind Regards,
Nadin

Hi,
Design the views for your requirement using either the Webdynrpo for Java or ABAP.
Desgin the first view with for the selection views by using the Radio buttons UI elemnts and design the 2nd view in the same componenet by displaying that report in th table UI element.
Now map these Ivoew of this WD componenet to the EP Iview.
Regards
Lekha

Select query in a report

Hi!
Is it possible to modify a select query for a report in the following way:
I have created two fields where users input values and operators.
Operators selection is a static list consisting of: =, like , in
Value field is a text field.
The current query is:
SELECT
A,
B,
C
from TABLE
I would like to add:
WHERE
A : P1_OPERATOR : P1_VALUE
but it doesn't work; I get a notification that the operator is incorrect.
It has a defaulft value = and when I set let's say 5 in the value field the whole query should be:
SELECT
A,
B,
C
from TABLE
WHERE
A = 5
Regards!

Hmm, I get the following error:
Updatable report parse error:
ORA-20001: Query must begin with SELECT or WITH
The only difference I see is that your type is SQL Query (PL/SQL function body returning SQL query) while I have SQL Query (updateable report) hardcoded.
I have APEX 4.2.2, I'm not quite sure how to change this...
This is my code:
begin
:P7_QUERY := 'select ROWID,BNK_ID,MSR_PRD_ID,SRC_STM_ID,ID,ID_RETKA,RSP,OZNAKA_RETKA,DATUM_STANJA,OZNAKA_IZVJESCA,OZNAKA_KOMITENTA,MBR_KOMITENTA,KOMITENT_NEREZ,ZUPANIJA,DRZAVA,SEKTOR_NEREZIDENTA,VRSTA_POVEZANOSTI,INSTRUMENT,ISIN,VALUTA,OTKAZNI_ROK,IZVORNO_DOSPIJECE,VRSTA_INDEKSACIJE,VALUTA_INDEKSACIJE,PORTFELJ,UTRZIVOST_KREDITA,ZNACAJKE_KAPITALA,RIZICNA_SKUPINA,UGRADJENI_DERIVAT,ODNOSNA_VARIJABLA,PREDZNAK,IZNOS,IZNOS_ACTUAL,VRSTA_IZNOSA,KOMITENT_PBR,UDJELI_POVEZ_C,AR_ID,AU_ID,ACT_AR_BAL_KN,ACT_AR_BAL,AR_BUSS_ID,MTI_CCY_TP_ID,REG_NO,REG_SFX,JMBG_ID_NO,IP_ID,NO_DYS_OO,TAX_ID_NO,INSTRUMENT_OLD,PREDZNAK_OLD,IZNOS_ACTUAL_OLD,ACT_AR_BAL_KN_OLD,ACT_AR_BAL_OLD,NAPOMENA,NOVI_POSAO_F,LISTA_SUMARNA,LISTA_REKAP,POSTOTAK1,POSTOTAK2,POSTOTAK3,DZS_IDY_CL_ID,HNB_IP_CL_ID,EXG_RT_CRD_RSK_F from DWP.IZV_SLOG_DET
where ' || :P7_X_FC1 || :P7_X_O1 || :P7_X_O1;
return :P7_QUERY;
end;
I have also set Use Generic Column Names (parse query at runtime only) nad P7_QUERY as page item to submit.
Regards,
Ivan

How to suppress extra form feed for character report printing using ORARRP?

Dear All,
We are using Oracle Application Server 10g (10.1.2.0.2) on Windows 2003 Server and most of our client PC's are Windows XP Professional machines. We are migrating our existing oracle application from 2-tier architecture to 3-tier architecture (6i to 10g). We have installed ORARRP utility for remote direct printing and to a limited extent we are successfull in getting the things work out for our system users, However, we are facing a problem using the ORARRP utility for which we are not able to find a solution till date.
We have configured ORARRP utility on every user's PC and the printing of bitmap reports is working well. However, while printing CHARACTER reports using ORARRP utility, after the report gets printed, an EXTRA FORM FEED is issued by ORARRP to the printer and because of this the printer stationary skips one extra page and advances to the next page. Please note that this EXTRA FORM FEED happens only while printing a CHARACTER REPORT.
Has anyone come across such a problem using ORARRP ? How can we avoid this extra FORM FEED from CHARACTER REPORT printing using ORARRP ? Is there any other tool which supports remote direct printing just like ORARRP?
I shall be highly obliged if anyone could reply to my queries ASAP.
Regards,
KrishnaKumar S

Please help ! I tried the "send_form_feed" and "postscript_dos_print" parameters without success. The extra form feed is always there. Thanks.

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to add a new selection criteria in a report painter

Hi
I would like to know how to add a selection criteria in a report painter. I believe in Gen data we can add our selection criteria but my there is no option to select company code in that. Can anyone help me in this
Thanks in advance
Sankar

hi sankar,
When u click on the Gen. Data Selection on the right side of the screen you can see the Available Characteristics.
On the same side u can see with the 3 colors blue, yellow and white....
Click on the that , in that screen click on the Administrator option.
There in that screen UNCHECK the company code.
Click on the ACTIVATE and CLOSE it.....
Again SAVE the table settings.... then you can find the Company code..
Hope this will helps u out...
Ranjit Kumar

Selection screen in abap report

Hi,
I am using 2 selection options in my report.
But the list of values for second selection options is depends on the selected value in the first selection option.
how to do this.
because i cant use selected value of first option in AT-SELECTION point.

Hi again,
1. There are 2 list box on selection-screen.
2. 1st shows all company code, and company text.
3. On selecting the first,
   the second is populated.
(it selects again from T001
   and shows the same company information)
4.
REPORT abc.
TYPE-POOLS: vrm.
DATA: it_val TYPE vrm_values.
DATA: ekk TYPE vrm_values.
Sel Screen.
PARAMETERS         p_diff LIKE t001-bukrs AS LISTBOX
              VISIBLE LENGTH 16
              USER-COMMAND ab.
PARAMETERS     hh LIKE ekko-ebeln AS LISTBOX
              VISIBLE LENGTH 16 .
AT SELECTION-SCREEN OUTPUT.
REFRESH it_val.
CLEAR it_val.
SELECT bukrs butxt FROM t001 INTO TABLE it_val.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = 'P_DIFF'
      values = it_val.
Second List Box
REFRESH ekk.
CLEAR ekk.
SELECT bukrs butxt
FROM t001
INTO TABLE ekk
WHERE bukrs = p_diff.
clear hh.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = 'HH'
      values = ekk.
regards,
amit m.

Functional area(FKBER field in the selection screen of the report painter))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers.

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

Multiple selection lists in abap report

I need to populate a multiple selection list and then read the selection in an ABAP report. A parameter with list box is not solving my purpose.
Please give any suggestion on this.

Hi
If you can't use the SELECT-OPTION statament, there's no standard solution.
U can only try to create a table control with only one colunm and every hit of the table control is a single hit for the selection.
To insert a table control in a selection-screen u need to use the statament:
SELECTION-SCREEN BEGIN OF TABBED (see the help)
In order to create a TAB where u can load a subscreen where u can insert a table control.
The u need to transfer the hit from table control to a range.
Max

Posting date as selection parameter in COPA report painter report

hi,
we want to include the posting date and document date in selection criterion of COPA report generated through report painter.
we do not want to use period and fiscal yr as selection criterion.
pls suggest.
regards
FLD

Hi Sashidhar,
First go to the program RHU_HELP and you need to enhance the code using the enhancement technique using implicit enhancement. You can add your new selection criteria at line no 257( need to create an new implicit enhancement).
Hope this is helpful for you.
Regards,
Ramesh.

Is it possible to change values in pagination select list for a report?

The values showing up in my pagination select list for a report are 10,15,20,30,50,100,200,500,1000,5000.
Is it possible to not have this list show the 1000 and 5000 values? I've tried setting various row values in the layout and pagination section of the report, but nothing changes in the select list. Is there a way to change this, or is it set up in a template somewhere that I can change?
APEX version 3.0
Thanks

Figured this one out. Using the P1_ROWS item, added a static LOV with the correct values to override the one APEX was providing. The P1_ROWS item goes in the Number of Rows (Item) field in the layout and pagination section of the report.

Very Urgent! SAP Access via HCM Reports in Enterprise Portal 6.0

Hi SAP Experts,
it is very urgent.
When our Users execute Reports via HCM Reports in Enterprise Portal 6.0 and exit them via the Menu Button (Menu->List->Exit) in the Report result they can access SAP Backend via Easy Access.
My Question: Could we find out which Users and at what time they had accessed the SAP Backend via this gap?
Best Regards,
Nadin
I will reward Points!
Edited by: Nadin Schaa on Feb 12, 2008 9:48 AM
Edited by: Nadin Schaa on Feb 12, 2008 9:49 AM

Try these may be helpfull
U can find list of users in backend and also trancations codes they r accessing
SM04 -- u can find list of users
Regards
Krishna.

Currency conversion with variable in selection mask with problems

Hi Gurus,
I want to implement a currency conversion as follows:
when the query is opened a selection screen should appear and the whole data which is with Euro currency should be possible to translate in USD, GBP, FRF (depends on which currency the user is choosing).
I did a conversion with a variable with default value USD but I am not able to insert multiple currencies like GBP and FRF as default value/ suggestion in variable.
I created a variable on 0Currency with following adjustments:
- Processing By: Manual Input/Default Value.
- Reference Characteristic (0CURRENCY) Currency.
- Variable Represents: Single Value.
- Ready for input: checked
- default value: USD.
With adjustment "variable represents" > "single value" it is not possible to insert two or three currencies as default value.
When changing "variable represents" to "multiple single values" or to "selection option" it is possible to insert two or three currencies as default value.
But when the variable is saved with "multiple single values" or "selection option" the variable doesn´t appear in currency translation type in tab currency when selecting target currency with option "target currency from variable".
Any idea why the variable doesn´t appear with adjustments with "multiple single values" or "selection option"?
Or any idea how it is possible to achieve my whished currency conversion?
Thanks in advance!

Charlie Belt wrote:
saplaz-
> If I read your request properly, you would like to be able to translate values to any one currency at a time, from a possible list of currency. Remove the default value and whatever currencies are available in your RSCURR should be there.
That´s correct. I want to have a list of currencies in which it would be possible to translate. That means clicking in selection mask and the list appears.
That was my first thougth ... removing the default value. I removed the default value but only Euro (EUR) appeared in that list for selecting. I thought this has maybe something to do with the data which is available in the cube and that is only in EUR.
I will check the RSCURR and what kind of currencies are available.
cheers

Extra Selection mask in HCM Reporting WebDynpro

Similar Messages

Maybe you are looking for