Posting date as selection parameter in COPA report painter report
hi,
we want to include the posting date and document date in selection criterion of COPA report generated through report painter.
we do not want to use period and fiscal yr as selection criterion.
pls suggest.
regards
FLD
Hi Sashidhar,
First go to the program RHU_HELP and you need to enhance the code using the enhancement technique using implicit enhancement. You can add your new selection criteria at line no 257( need to create an new implicit enhancement).
Hope this is helpful for you.
Regards,
Ramesh.
Similar Messages
-
Selection values in Report Painter Report
Hi All,
I am creating a report painter report for Plan/Actual values using library 0FL.In my characteristic value column I included fiscal year as a value and hard coded the fiscal year so i dont need this parameter in my selction screen.When I execute the report the fiscal year is coming in the selection twice.i.e:
Fiscal Year
Fiscal Year
Company Code
Period
From Profit Center
To Profit Center
How do I wipe out this fiscal year from my selection screen? In GRR2 -> EDIT--> General data selection , I only have profit center values.I dont know why this fiscal year is coming up as a selction parameter when I hard coded in the column.Any help.Thanks
Regards
ShaunHI Shaun
In GRR2, Against the char, there is a check box where in you specify to treat it as a variable.. DId you check that box? Unless you check that, it wont appear in the selection screen
Regards
Ajay M -
Selection Field in Report Painter Report
Dear All,
Could any one tell me the procedure to add new field at selection screen for the report painter report ? To change the report painter selection screen i have to change the Report group or Report of the report group?
Thank in stackIn general data selection, i have already cost center, but it is not apprearing at selection screen. Only three field are appearing (Year + Period + Forecast), and i want to add cost center at the selection screen. How to make cost center field at selection field from General data selection option. Please guide me
Thank in stack
Nilesh Shete -
Data of the Report Painter report
Dear ALL,
I have the Report Painter report. When I'm executing this report I can save the data into the extract.
Could you tell me where are these data in the system(table?)? I want use these data for SAP script form.
Best regards,
IgorPlease go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
regards
vinod -
Selection screen control for a field in the report painter report
Hi,
Could you please advice me as to how we can add exclude selection functionality for a field on the selection screen of a report made by trhough report painter report.
Your prompt reply will be really appreciated.
Thanks,
Ramesh.look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZNODEID'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = p_field
value = space
value_org = 'S'
display = 'F'
TABLES
value_tab = it_node
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
endform -
Selection screen fields order in report painter report..
hi experts,
i have a problem with selection screen fields order in report painter report.
Actually in report painter report selection screen order is different compare to report writer report selection screen.
how should i get the same selection screen fields order For Report painter report compare to Report Writer report ?
For example, Report Writer selection screen order is:
ledger:
company code:
period:
current fiscal year:
previous fiscal yer:
previous quarter end period:
where as Report Painter selection screen order is:
ledger:
previous fis year:
current fis year:
company code:
period:
previous quarter end period:
please help me regarding with this.
Thanks and Regards,
NAGARJUNA.hi nagarjun,
Go to Sq01, select the query and goto to change mode.go to the next screens till u reach Selection fields. Here u enter the NO field in the sequence which u want ot appear in the selection screen and it is done. Save and execute.
Ex:
Selection fields No
Exclude Cancelled Lots 5
Material number 1
Plant 2
Material type 3
Inspection Lot Origin 4
Regards,
Lokesh -
Copy a COPA Report painter Report KE30 to a Z-Report in SE38
Dear all,
We have to copy a existing KE30 - Report Painter Report which is for COPA to a Z- Report in SE38 to have some conditions which was not possible through the report painter.
When copied we are not able to get the output in the screen as a drill down report but we are getting in spool request.
Requesting u all to help us in this regard.
Thanks in Advance.
Regards,
Vivek KHi Robin,
the request is not unusual. However, report painter does not allow for two key columns or a key column combining two characteristics. You might consider using SAP Query (with table COEP or COSS/COSP for aggregates) if you do not want to resort to developing the report in ABAP.
Regards
Nikolas -
Data for Report Painter report
Hi Gurus,
I have a report painter report S_ALR_87013019 . This uses the
Library 602 (gr23), report - 60BU-001 (GRR3).
Need to create a regular report based on this, Can you Please tell from which tables the values are getting retrieved by this report painter report, or in general on how to trace back the tables used by the report painter.
Also if it uses Set ID as inputs for fetching data, is there a way to get the setid/setclass value.
Thanks,
Regards,
RamanHi
The As on Date balance cant be cumulated...
Eg; you bought inventory worth 10 million in Current year and as of now you have 4 million worth of inventory in stock
Cumulated bal in this case is 10 mil and As on Date balance is 4 million... 4 million is what you will get in SAP reports
The same Key figure which shows values in comp code currency can be used
br, Ajay M -
Executing Report Painter Report in Loop With Different Selection Parameters
Hello all,
I have to execute a report painter report about 300 times, allways with a different set of selection parameters and allwasy send the result to a different person via mail.
Has someone an idea how to to this work in an automatic loop.
Thanks.HI,
My suggestion is to discuss this with your technical team (ABAP). A Good idea would be to create a wrapper program (small program based on your report painted report code) that contains email functionality. You can then save your 300 variants and then schedule a background job for the same using transaction code SM36.
Regards -
Need to call a Report Painter Report with filtered selection criteria
Hello All,
I have created a Report through which I am calling a Report Painter Program 'Z443' as I have to first filter out the selections and then pass it to the Report Painter Report.
I tried the following two ways and found these problems :
1. Submit (program) with selection-table ..... and Return.
The output had many entries i.e the parameters were not passed correctly to the Report Painter Report.
2. Tried using the FM ' CRIF_RW_WEB_CALL_REPORT '.
The transaction for the Report Painter is opening but selections from the first Report is not being transferred.
Please help if you have worked on any similar requirements .
Thanks!hi
thanx for ur reply.
i think the select-options is the best way to get more then one currency values.
but i need to know what code i have to write for display of this day.
in the standard report MCTA there he is using only one currency. similarly i need to add 2 more columns for each currency in that same report o/p.
how to do that can any body help me
regards,
maqsood -
Wbs plan data in report painter report
Hi Gurus,
Can we have wbs plan data in report painter report....
Can we use faglflext table for this???
Thank youHi,
FAGLFLEXT table for GL totals, for controling generally we use CCSS table and for PS may be you can use RPPS table not sure -
In report painter report, line item level drilldown report requirment
Dear All,
I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
Please sugget anyone, where I am doing mistake in report creation level.
Thanks
M Srinivasa reddy
Ph : 9637399076Thank you,
I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
Thanks
M Srinivasa reddy -
Profit center group number on the report painter report.
Hi,
We have a client requirement where we have to develop Profit center by Functional Area report by using report painter report functionality, however we are able to bring profit center group description on to the report as per the requirement, but not able to get profit center group number displayed on the report.
Can anyone please advice me if we can get the Profit center group number displayed on the report in Report painter report. Else let me know if we can get the requirement met by an ABAPER.Hi.
First of all, through transaction GS01 create a set ID for profit centers.
Give table GLPCT, let the set type be the default (basic set) and give field name RPRCTR. Then define the range of profit centers you want. If you want all the profit centers give * in the "from value field".
Then create a variable through transaction GS11. Give table and field as above, choose variable type set and at the default set field choose the set you created.
Finally, at report painter go to Edit/General Data Selection and select profit center.
Check both flags (for entering sets and variables) and give at the form field the variable you've made.
Now the progit center group will be available in the selection screen with default value the set you've made.
Regards -
Change the default setting for report painter reports.
HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
VenuHI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal -
Issue with Report painter report
Hi Gurus
I need your help with an issue with one of our report painter reports. I have created a new report with Fiscal Year, Ledger, Company code, and Account number range in General data selection. The report row has field Segment and each period corresponds to one period of the fscal year. In here, I have selected Period and Record type 0 as characteristics. The basic key figure is KSL for second currency.
I am able to save the report but when I execute it, I get the error that
*Characteristic GJAHR cannot be combined with key figures*
Can someone please help me as why I am getting this error?
I appreciate your help.
Thanks,
ShaluHi
I think you have to rechek the genral data selection setting , related to fiscal year.
had u defaulted the fiscal year or used variant for fiscal year
Thanks
alok
Maybe you are looking for
-
All, If this isn't the best forum to post in, please let me know. I am having an issue when I accept calendar invites in the native/modern application for calendaring in Win 8.1. Whenever I then go back to open and view the contents of a meeting, all
-
My Ethernet won't connect online anymore
Just a little while this was working. I am using a school network so I have no control over the router, it's public. I had to change my MAC address in order to connect and for a couple of months it's been working, even today. I don't know what change
-
RE: Profit center hierarchy
Hi Guru's Can any one explain to me about Profit Center hierarchy, Where to create that one, where i need to activate, I'm trying to create Tcode KCH1, KCH5N. -Please explain to me breifly, urgent. - Points will assing, thanks venkat.
-
KG 1061 Wireless Keyboard Does not work
Key "a" stopped working after I haven't used my computer for a week. Other keys seem fine. It was working fine before. I've tried replacing batteries, uninstalling the keyboard and updating driver. Nothing works. Please help!
-
All opened applications crash when external monitor is attached in to MacBook Air 2013
I experience crashes (automatical restarts) of all the applications when I attach external monitor. I have MacBook Air 13-inch mid 2013 and OS X 10.8.4 in spanish. The crashes are regular but not every time I attach monitor. Does anyone experience th