Extra time after click in recorded PPT projects

I am trying Captivate 5 on Mac OS 10.6.5
I imported a power point presentation and added audio for each slide.  I am advancing to the next slide on click.
For some reason, when previewing the project, AFTER I click to advance to the next slide, the current slide is silently displayed for 5-15 seconds before advancing to the new slide and the new audio starts.
I have checked the audio and there appears to be nothing AFTER the audio.  That is, the "END" indicator on the timeline matches the length of the audio.  It sits there until I click, then the extra time elapses (silently) then the new slide appears with the audio for that slide.
This is very furstrating - any ideas would be greatly appreciated.

I spoke too soon!
The above fix worked for ONE of the presentations (#8) that had this issue.
However, when I applied this solution to the other presentation (#5) that had this issue, instead of opening presentation #6 as defined in the settings, it opened presentation #2!!
All other settings for the slide, publication, and button are exactly the same.
One of my largest frustrations with Captivate5 has been trying to work around inconsistencies like this.
However, I found a solution (rather kludgey, but it does work):
The problem seems to be with the "Continue Button" If the continue button is eliminated on the LAST slide of the project, the next project loads just fine.
I duplicated the last slide so that it is now the last and second to last slide. I left the button on the second to last slide and deleted it from the last slide. I deleted the audio on the last slide. Then I moved the timer of the last slide so that it only played for 1/2 a second. Then the next presentation in line (#6) loads fine, and the 12-15 second pause after hitting the continue button completely disappears.
As noted elsewhere, be sure that the fade-in on first slide and fade-out on last slide on your project File > PUBLISH SETTINGS > Project > Start and End are turned OFF.
The ACTION settings on your last slide (with NO navigation button) should be set to
On Enter: Continue
On Exit: Go to the next slide

Similar Messages

  • Why is there extra time at end of movie???

    Just wondering why, on a couple of projects, I have extra time in the timeline?
    The project is 1min 6 sec long but I can scroll to 5min 35sec. I have checked to see it there is an additional piece of footage or audio clip 'hidden' at the end...nope.,,,I've also checked to see if there is a 'black' frame at the ens and again, nope.
    Just wondering how this will transfer back to the camera??? as 1:06 or as 5:35.
    Thank you for your input

    Hi mikex:
    Did you split and trash any audio or video clips while you were making the movie that ended up in the trash?
    If so, go ahead and empty the trash and save the movie.
    Then close iMovie and reopen it.
    Did that help?
    Sue

  • How to I get premiere 12 to react after clicking new project?

    I reinstalled premiere 12.  How do I get it to work after clicking on new project?

    Junipertree
    What computer operating system are you running your Premiere Elements 12 on?
    I have been battling Premiere Elements 12 on Windows 8 and 8.1 64 bit. Major issues
    a. Minute or more to open File Menu/New/Project and over 1 minute for the program to close after I hit the close button. The performance of the program is otherwise acceptable.
    The irony is that I have Premiere Elements 11 on the same computer that has none of these issues.
    But, keeping in mind that problems with the same symptoms can (often do) have different causes, I will ask you the following
    a. What computer operating system and what are the computer resources?
    b. Is your video card driver up to date according to the manufacturer of the video card?
    c. Do you have the latest version of QuickTime installed on your computer? Are you running Premiere Elements 12 as Run as Administrator or from a User Account with Administrative Privileges?
    d. Have you shutdown Services and StartUp programs running in the background?
    e. Have you looked at the problem with and without firewalls and antivirus disabled?
    f. Are you installing from purchased download files from Adobe or from a purchased installation disc?
    g. Do you have other versions of Premiere Elements on this same computer that are starting and running and closing without issue?
    h. How long are you waiting after you click New Project? How do you shutdown the program when you find yourself in this situation? Where are you selecting "new project"...in the Welcome Screen or in the opened program using File Menu/New/Project?
    Let us start here and then gauge the situation and remedies. It should be noted that, at the present time, I am not have any issues with Premiere Elements 12 on Windows 7 64 bit, only Windows 8 or 8.1 64 bit.
    Thanks.
    ATR

  • My iPad 2 lost its mail after I upgraded to IOS8. It crashes every time I click on mail. Yet, I can send photos and forward things in outgoing mail.

    Lost my mail
    after I upgraded to IOS8. It crashes every time I click on mail. Yet, I can send photos and forward things in outgoing mail. how to restore?

    Answering my own question here. It's fixed! Another user recommended I switch to another wireless network then back to mine. And it worked! Mail is sending again with no problem.

  • Every time I click on Firefox a box pops up asking me if I will allow changes to my computer from firefox This started happening after I installed firefox 5

    Every time I click on Firefox a box pops up asking me if I will allow changes to my computer from firefox This started happening after I installed firefox 5 e

    Check that you do not run Firefox as Administrator.<br />
    Right-click the Firefox desktop shortcut and choose "Properties".<br />
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.<br />
    * Privilege Level: "Run this program as Administrator" should not be selected<br />
    * "Run this program in compatibility mode for:" should not be selected<br />
    Also check the Properties of the firefox.exe program in the Firefox program directory.<br />

  • Can I "show" an image for a specific amount of time after a click?

    Hello,
    I would like an image to appear for only a specific amount of time after the user clicks a button.
    Is this possible?
    Thanks for any help!

    You cannot time with an advanced or shared action. Isn't a rollover image (which you can time) a valid alternative? You could use the timeline in combination with an action Continue, but I don't know the precise circumstances of your question.

  • Anyone out there that can maybe help. I was using my 5s to record my meeting minutes for the first time and clicked cancel cos I wanted to continue recording and instead deleted it all! :( anyway to get it back?

    Anyone out there that can maybe help. I was using my 5s to record my meeting minutes for the first time and clicked cancel cos I wanted to continue recording and instead deleted it all! :( anyway to get it back?

    The other Allan is being facetious--you somehow found the forum for pre-2006 eMac desktop computers that gets little traffic.
    Getting you moved to the iPhone forums.

  • Re: after updating the app Flight Tycoon, i cannot access the game. Each time I click on the app it goes back to the main page.

    Re: after updating the app Flight Tycoon, I cannot access the game. Each time I click on the app it goes back to the main page.

    Send a bug report. And wait for an update.
    OR
    uninstall and re-instal the game all over.

  • HT202159 After clicking install, "an error has occurred" pops up. Tried it several times for several days already, the same happens.

    Just recently purchased Quartet for Keynote, downloaded it after clicking install, "an error has occurred" pops up. Tried it several times for several days already, the same happens.

    Try the developer's site FAQ;s ...
    http://graphicnode.com/support/faq/
    Their contact info here >  http://graphicnode.com/support/contact/
    Check GateKeeper
    Open System Preferences > Security & Privacy > General
    Make sure App Store and indentifed developers is selected.
    If not, click the padlock icon to make changes. You may be prompted for your admin password.
    Then try downloading the app.

  • HT1926 We cannot open itunes after installing it. The licensing agreement comes up and we agree but then nothing happens. Each time we click on the itunes icon, the agreement comes up. We cannot get to itunes at all. I have followed some of the suggestion

    We cannot open iTunes after installing it. When we click on the icon the licensing agreement comes up and we click Agree but then nothing happens.  Each time we click the icon the agreement comes up.  We've tried uninstalling and reinstalling but we have the exact same problem.

    Refer to steps to remove SC files here:
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime. START / CONTROL PANEL / PROGRAMS N FEATURES / highlight QUICKTIME and click REPAIR.

  • App Store: Unconfirmed buy after clicking on URL ("silent buy")?

    Hi Forum,
    Last Friday I bought on my new iPad without my confirmation ("Click on Price or Purchase") 2 applications by simply clicking on a web link which opened the App Store on my new iPad! Yes, you read correct: I did NOT confirm the purchase by clicking on ANY button in the App Store! The App Store page (showing the corresponding App) simply claimed that the application was already Installed - doh! Checking the iPad "workspace" ("Home") afterwards indeed showed the app installed (completely downloaded while I was dazzled in the App Store - record time in downloading!).
    Anyone else ever experienced such a thing, a purchase action without you confirming such an action? Mind you, I am not talking about the fact that when you buy one application (and identify using your Apple ID password) that your identity remains valid for another 15 minutes, and the next time you just have to click "Install" (without entering your password again). I am really talking about the fact that you click on some web site URL link which opens the App Store and executes the purchase for you!
    Okay, here's the whole story:
    First I started FaceTime on my iPad. I had to re-enter my Apple ID password (probably because I hadn't used the app for a long time? But I did use it in the past...), and I called a friend of mine (video chat).
    Matter of fact I was now somehow "logged in" with my Apple ID (into FaceTime! At this point I never had identified myself in the App Store on my iPad on that day).
    Next I went to a news site on "9 to 5 Mac" which promoted strongly reduced apps ("iOS & Mac App special deals for the 4th of July" - apparently I am not allowed to post this URL here, some Forum moderator already deleted a previous post of mine - but it totally doesn't matter, just assume ANY website which links to the corresponding iTunes pages!).
    Interested in the game "Real Racing 2 HD" for iPad I clicked on the link next to "Real Racing 2 HD" (in Safari on iPad) which pointed to click.linksynergy.whatever, followed by lots of parameters (again, I am not allowed to post URLs here, even though they might be part of the problem! But again, the actual URL parameters could be insightful, but in the end the error would be on Apple's side anyway).
    What happened next is that in Safari I got a redirect to some page and immediatelly after that the App Store on the iPad was opened (as expected) (in Safari the browser returned back to the "9to5mac" site).
    Now what I did not expect was that in the App Store the button which usually shows the price (or the option to Install) was greyed out and it said "Installed"!
    Huh, what?! But maybe I had once bought that game already (as a matter of fact I did on the Mac Desktop App Store a long time ago - so maybe a nice gift from Apple or the developers?)
    So I clicked on another link to "Battlefield: Bad Company 2" - a game which for sure I never had bought on any device before!
    Interestingly this time a message popped up in the App Store saying "Your request could not be satisfied" ("Ihre Anfrage konnte nicht abgeschlossen werden.") - we will come back to that later.
    So I manually entered the title of the game ("Categories / Search")... and again it claimed that the game was already installed! And indeed, both games were on my workspace, fully installed - and working!
    To make that very clear: I never clicked on any other button in the App Store, from the very beginning it said "Installed"! Nor did I ever (on that day) identify myself with my Apple ID in the App Store (but in FaceTime just before, in case that is related anyway...).
    So I went back to my MacBook Pro, checked my email and indeed, about 30 minutes later I had a Purchase Confirmation email from Apple (luckily that 99 cents promotion was apparently still valid: I was charged CHF 1.00 per App). So yes, that implicit BUY action really cost me money.
    Now to the even weirder part: remember the "Your request could not be satisfied" message from "Battlefield"? Curious what would happen when I clicked in my MacBook Pro desktop Firefox on above links, I was forwarded to the iTunes Apple website, but in the US Store (not surprisingly), and a popup message appeared telling me it wanted to open the iTunes app. After confirmation with OK iTunes launched and the following message appeared: "Your request could not be satisfied - the requested article is currently not available in the Swiss store. But it is available in the US store. Click on 'Change Store' to view the article."
    Original message:
    "Ihre Anfrage konnte nicht abgeschlossen werden.
    Der von Ihnen angeforderte Artikel ist zur Zeit nicht im schweizerischen Store erhältlich. Er ist jedoch im amerikanischen Store erhältlich. Klicken Sie auf „Store ändern“, um den Artikel ansehen zu können."
    (The same message appears with "Real Racer 2 HD" on my MacBook Pro. Both apps actually are in the Swiss App Store as well, also for the reduced price of CHF 1.00. However on my iPad I just remember getting the "Your request could not be satisfied" for "Battlefield").
    So both links from the original website (9to5mac) pointed to the iTunes US store, on my iPad only in one case did I get a "Your request could not be completed" message, but in any case both apps were installed without me acknowledging the purchase (by clicking on "Install").
    Maybe I did click on "Install" after all? Maybe one time that can happen - but not twice, especially if you pay close attention on whether you do so or not! Maybe I purchased those applications anytime before (with proper confirmation on my side)? But that must have happened between July 3rd (the day the 9to5 article appeared) and yesterday, July 6th. Because as I said, I am totally sure that I never bought Battlefield ever before! And the previous 2 days I was not at home anyway (and I did not have my iPad with me).
    But to make really sure whether it is possible that these applications - 444 MB for Real Racer and 265 MB for Bad Company, total 709 MB, not exactly tiny downloads - were downloaded yesterday I checked my home router statistics (*), and indeed: on that Friday the download was 756 MB! That pretty much exactly matches with the iPhoto Stream downloads/synchronisation I did as well!
    And mind you: usually when you click on "Install" you get pushed back onto the "Home" screen of the iPad and you see the icon appearing, together with the download progress bar. That definitively did not happen when the App Store was opened on my iPad, after clicking in Safari onto those two links! The apps were fully installed (and the icons next to each other, indicating that they were downloaded indeed after each one) when I checked (so yes, congratulations to the Apple App Store - download speed must have been amazingly fast!).
    So here are a few more key facts:
    * I bought the new iPad in the US (in case that matters)
    * All involved software updated to the latest (non-beta) software: iOS 5.1.1 (Lion 10.7.4)
    * Since last week I have a Voucher amount of 50 CHF for my iTunes/App Store account (for the first time ever) - so that voucher amount got charged. Maybe that is related to the problem?
    * I have exactly ONE Apple ID for everything (iCloud, Desktop App Store, iOS App Store, FaceTime, ...) - I never had any other Apple ID
    Oh and mentioning iCloud (which might be related). I am not sure whether it was before, during or after those two purchases, but I played around with iPhoto on my MacBook Pro and created a new iCloud Email acount (and also enabled "Mail & Notes" iCloud service in the System Settings during that action). So not sure whether this could have had an influence on that "implicit purchase action" as well...
    So what did I do? I called Apple Support here in Switzerland, told them about this issue and they told me the "15 minutes and your identifictation remains valid" thing (which I already knew). My objection that even when I am authenticated in the App Store a click on a random website (leading to the iTunes website and opening the App Store) should never do a purchase without me confirming was acknowledged by the support, but I don't expect them to do a follow-up on that (they noted down the URL I gave them and that was it).
    Anyway, I did not insist on reverting those purchases, as I would have bought them anyway - but it gives me a very shallow feeling that when clicking on some link it might actually produce a valid purchase action, even if you haven't actually authenticated in the App Store (but possibly with some other Apple service such as FaceTime)!
    Anyone else experienced a similar situation?
    Best regards, Oliver
    (*) Even though we are talking about games here you may safely assume that I am pretty proficient with any OS/computer and even know the difference between "authentification" and "authorisation" when it comes to IT security

    Hi,
    unfortunatelly it seems that one isn't allowed to post 3rd party URLs (even though I am totally not connected with that site in question!) - I already had my previous post removed after just one hour.
    But you'll find the page in question when you search for
      "iOS Mac App special deals for the 4th of July" 9to5mac dot com
    (replace the " dot " by a "." - use the quotes " in the query). It should be the first Google hit...
    Again, I don't think this is the fault of those site (respective the site you get redirected to, which will finally point you to the iTunes website...). If at all then it was a security hole in iTunes Store itself which allowed the external site (probably even without purpose) to trigger a "silent buy"! It was also at the time when Apple apparently struggled in the App Store with certain App downloads being faulty, so it is well possible that this was just a "temporary glitch".
    Mind you, the above links will redirect you to the US store, and since I am based in Switzerland (and my iTunes account is registered for the Swiss Store), I should not even have been able to manually trigger the purchase there in the US Store. For instance when I click on those same links in my desktop browser the iTunes Store application opens and i am told that "these offers (offered in USD) are not available in the Swiss store and I have to switch the Store from the Swiss -> US Store - but then off course I would not be able to purchase (which is correct), since I do not have an US iTunes account.
    However the same offers are (were) available in the Swiss App Store as well for the equivalent reduced price in CHF - so even though I got an "unavailable" message on my iPad for the second application it was still downloaded - without further ado! The Apple receipt was then in the correct amount and currency (the same amount as in the Swiss Store). So again, even though I should not have been able to download these two apps iTunes somehow manages (behind my back!) to download the corresponding offer from the Swiss store, without me pushing any button (I am not even sure whether you can actually "change Stores" in the iPad version of the App Store, as in the desktop iTunes app...)

  • IMovie crashes when click on create iDVD project

    IMac Power PCG5 1.8 GHz, 768 MB DDR SDRAM, running Tiger (can't find the version, but must be the latest)
    iMovie 4.0.1
    iDVD 4.0.1
    I worked on my iMovie project for months, I cliked iDVD on the right, added chapters. When I click on "Create iDVD project" I get a message which says that "Your movie contains still, and/or slow motions, reverse clips which need to be rendered for export to iDVD or DV tape".
    I click on "Render and Proceed" and the program crashes.
    Previously, the program also warned me that 39 stray clips had to be put in the clips panel, and I did it.
    The first time I clicked on the rendering it did start rendering, but it stopped after a few minutes (right when a CD I was importing into iTunes at the same time finished importing...could it matter?). Since then, it does noit even start rendering.
    In the past, I have succesfully made two movies with iMovie and iDVD, burned them on DVDs etc, but I was using earlier versions of the sofware and OSX. So I feel I am not a total incompetent.
    Thanks for any tips or suggestions to anybody who has them!
    sandra

    Hi Sandra
    Try this instead:
    When You have added the Chapters.
    a) Close iMovie
    b) find the project icon/folder
    c) Ctrl-click on it and Show package.
    d) in this there are a folder -> Shared Movies -> iDVD
    e) in this there is a QT movie nnnnnnn.mov
    - You can test this with QT-player to see that it is OK -
    f) drop this into an open theme in iDVD (just inside the edge of the
        window) and save it as a desktop image
    (if iDVD prior HD/5 You have to add a hack to make this possibly
    named HPfurz and install it)
    Test this with Apple DVD-player - OK then burn it with iDVD
    or Toast if You have and don’t want to re-code the movie.
    Yours Bengt W

  • CS5 won't select brushes the first time I click on them

    Hi,
    I'm having some trouble with picking brushes to use in CS5. The first issue is that when I scroll through the different brushes available, if I hover over one for too long (in order to make the alt text with the brush's name show up), the brush selection will jump back to whatever I had selected previously, and I have to scroll through again to get back where I was. The second issue is that when I click a new brush I want to use, then move my cursor to the canvas, the brush resets itself to whatever I had selected previously, and I have to go back and reselect the new brush. (Sometimes more than once.) It's really messing up my work flow...
    Does anybody have any idea how to make Photoshop actually select the brush I click on the first time I click it?
    I tried reseting the brushes to the default, so that there weren't so many (I've downloaded quite a few) but this didn't help. I also tried restarting Photoshop. The problems are still happening.
    For the record, I am using Photoshop CS5 on a Mac running OS 10.6.8. I'm using a Wacom tablet but also the computer's touchpad. The problem seems to happen whether I control the cursor with the touchpad or the tablet.
    Thanks for your tme!

    Unfortunately I'm still having the brush selection issue even after doing this. (Though it did fix some other things that had been frustrating me, so thank you!)

  • New page after end of record

    Hi i'm using asp.net 2.0,VS 2005 and CR by default comes with VS 2005.
    I read the records from DB and bind into CR for 10 pages. It's displaying records at 10 pages but the 11th page has created and nothing is there. I dont want to create the extra page after records end.
    How to solve this?

    On crystal report, open the section expert.  Go to the section that states "New Page After" and click on the X-2 button next to it".  In the formula editor, type Not OnLastRecord.  That will tell the report not to go to a new page on the last record.
    Good Luck
    Cathy

  • Yosemite/XCode 6.1 Freezes when every time I click in "images.xcassets"

    After updating my XCode to version 6.1 in my Yosemite , the IDE freezes every time I click in "images.xcassets". I've already closed my project, created a new one, and the result is the same when I click in "images.xcassets" on the left side.

    Just downloaded xcode 6.1.x on a macbook pro running Yosemite. I am able to create a project and bring an Image View object into the storyboard. But when i click on images.xcassets to import images, xcode just hangs. None of the steps below work :
    deleted project and created a new project
    deleted project.xcworkspace
    deleted Xcode and did a fresh install
    Can anyone help? Thanks!

Maybe you are looking for