Extract / Export Data from my IBM Cognos Applix TM1 to BW7 Oracle based

Hi,
I need to extract data from my IBM Cognos Applix TM1 to my Oracle based BW7.
Anyone has done this ?
How to get Data out of the Applix TM1 ?
Are BW7 Adaptors for TM1 availiable ?
What about OLE DB ? Anyobody tried this yet ?
Thanks
Martin

Its CSV File only:
Folgende Methoden sind nicht möglich:
-Oracle Gateway auf TM1
-Oracle Heterogenous Services auf TM1
-ODBO, MDX Query etc,
Als Export Methode ist der CSV Export möglich, via:
-TI Process unter Prolog, Data oder Epilog via ODBC / ODBCOPEN
Dann der übliche Weg ins BW via ftp o.ä..
Im Oracle des BW bestünde die Möglichkeit die CSV Datei als External Table in einem eigenen Oracle Schema bekannt zu machen und dann die CSV Datei wie eine Tabelle über einen BW-DBConnect auf seine eigene Oracle Datenbank anzusprechen oder ebendirekt als BW CSV Extraktor.

Similar Messages

Export data from database table before database migration

Hello,
We are planning to migrate our SAP ERP 6 Ehp4/NW7.01 from Oracle 11.2 to IBM DB2 v. 9.7 database. During test migrations I have established that we spend a lot of time for one particular table (COEP). Because we donu2019t have possibility to archive this table before migration I have an idea to export data from previous years from this table to the file system (using an ABAP report), delete those data from table before migration and then after migration, import back to the database from the file system.
Does anybody have any concerns or suggestions about this idea?
Thank you for your answers
Andrej

Hello Andrej,
I strongly do not recommend to do so.
I am not sure whether technically this could work at all..
Even it if would work .. In order to really save time, the export and the import would have to be a dirty one (meaning the system is operational and in production). With this there is a high risk to produce inconsistencies on this table. And you most likely will receive no support if something unforeseen happens and you end with problems.
Also your approach (if it should work at all) , would have to be tested thoroughly by you , also protecting the table from any changes.
I do not believe that this can save any effort compared to implementing advanced migration techniques like table splitting.
On top, you would go high risk to end with an unsupported system, with not using official migration procedures
Hans-Juergen

How can I extract the data from Xstring .

Hi Gurus ,
How can I extract the data from a XSTRING .
I have to get the data which is filled in the survey form the data is getting saved in form of xstring .
Someone told me that there is a standard FM for that . but I am not able to find .
Please reply with the FM in case some one knows about it .
Thanks in advance .

The following code works as of 7.0 (in any SAP system):
FORM XSTRING_TO_STRING USING input TYPE xstring CHANGING output TYPE string.
TYPES : BEGIN OF ty_struc,
          line TYPE c LENGTH 100,
        END OF ty_struc.
DATA lt_char TYPE TABLE OF ty_struc.
DATA length TYPE i.
length = xstrlen( input ) / cl_abap_char_utilities=>charsize.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    buffer                = input
tables
    binary_tab            = lt_char.
CONCATENATE LINES OF lt_char INTO output RESPECTING BLANKS.
output = output(length).
ENDFORM.
Edited by: Sandra Rossi on Mar 30, 2010 12:24 AM

Export data from a table to text file using srcipt task

Hi
i am new to SSIS
i have to export data from a table and append it into a existing file through SSIS script task
please help
Thanks
Umesh

Hi Umesh,
The data structure of the source table and the structure of the destination file are the same, right? Is the destination file a flat file? Do you have to do it through Script Task? If the destination file is a flat file, this can be done easily by using
the stock tasks/components other than .NET code. In the Data Flow Task, we choose the appropriate source adapter (such as OLE DB Source or ADO.NET Source) to extract data from the source table, perform transformation if necessary, and then load to the destination
file via a Flat File Destination. When setting up the Flat File Destination, uncheck the “Overwrite data in the file” option so that the extracted data will be appended to the existing file.
If you need to implement it through Script Task/Component indeed, you may benefit from the following code examples:
http://stackoverflow.com/questions/8070163/how-to-add-custom-footer-to-an-ssis-flat-file-seperate-component-or-script-tas
http://stackoverflow.com/questions/8467326/add-header-and-footer-row-flat-file-ssis
If you need further help about the script, I suggest that you ask a new question in .NET forums where you can get more dedicated support:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=netdevelopment
Regards,
Mike Yin
TechNet Community Support

Export data from BW to oralce with open hub service.

Hi Dear all,
When I tried to export data from BW to oralce with open hub service. There is no available RFC destination for this oracle system. That means i need to create a RFC destination for the oracle server.
How can i achive this, in SM59? But U don't know much how to configure this. Is there any expert can help me there?
Kevin

Hi kevinhuang ,
RFC connection.......... You can check in SM59 tcode...Double click on the the desired Source system
or
RSA1-->Source systems and then right click on Source system and Check
To test RFC connection...RSA1 ....Source system....... Right click on desired source system >> Connection Parameter.....Test connection
Pls go thru this links,
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
BI Open Hub Destination and data transfer process setup
http://www.ibm.com/developerworks/data/library/techarticle/dm-0802li/index.html
Hope this helps U.
Regards
Chandra Sekhar
Edited by: Chandra Sekhar T on Apr 21, 2009 3:36 PM

Export data from SAP Document Management System to File System(FileStore)

Hi,
We need to extract/ export data (documents and metadata) from SAP Document Management System to windows File System (File Store), can anyone suggest us tool or methodology to do the same.
Thanks,
Nilesh

I'm also looking for a solution for this problem. We are capturing comments in BW-BPS layouts. They get stored in BW's document management system and we would like to export them out of the system for external reporting into an ACCESS database.

Example on extracting time data from clusters

Hi Experts,
   Please send me a sample code for time data extraction from clusters. or steps to extract time data from clusters.
Thank you.
Regards,
Admir.
Points will be rewarded.

Hi
see the sample report for time data fetching
But ime data is not fetched from Clusters, only payroll data is fetched from clusters
Time related infotypes are 2000 to 2999.
REPORT zh_absence_quota
       NO STANDARD PAGE HEADING
       MESSAGE-ID zh_msg
       LINE-SIZE 169
       LINE-COUNT 60(1).
               T A B L E S D E C L A R A T I O N S
TABLES:    pernr,    " Logical PNP
           t001p,    " Personnel Subarea
           t529u,    " Employment Status
           t500p,    " Personnel Area
           t501,     " Employee Group
           t503k,    " Employee Subgroup
           t549a,    " Payroll Area
           t554s,    " Absence Type
           t554t,    " Absence Type Texts
           t556a,    " Quota Type
           t527x,    " Orgn. Unit
           t556b,    " Quota Type Text
           pa0003.   " Payroll Status
INFOTYPES:
           0000,   " Actions
           0001,   " Organizational Assignment
           2006,   " Absence Quota
           2001.   " Absences
               T Y P E S D E C L A R A T I O N S
Employee Absence Structure
TYPES: BEGIN OF s_2001,
         pernr TYPE persno,       " Personal Number
         awart TYPE awart,        " Absence Type
         subty TYPE subty,        " Sub Type
         endda TYPE endda,        " End date
         begda TYPE begda,        " Begin date
         abrtg TYPE abrtg,        " Absence days
         ename TYPE emnam,        " employee Name
         atext TYPE abwtxt,       " Absence Type Text
       END OF s_2001.
Employee Absence Quota Structure
TYPES: BEGIN OF s_2006,
         pernr TYPE persno,       " Personal Number
         ktart TYPE abwko,        " Absence Quota Type
         year(4) TYPE n,          " Year
         subty TYPE subty,        " Sub Type
         endda TYPE endda,        " End date
         begda TYPE begda,        " Begin date
         anzhl TYPE ptm_quonum,   " Absence Entitlement days
         ename TYPE emnam,        " employee Name
         ktext TYPE kotxt,        " Absence Type Text
         kverb TYPE kverb,        " Deduction Quota days
         anzhb TYPE ptm_quonum,   " Balance days
       END OF s_2006.
Combined Employee Absence and Quota Structure
TYPES: BEGIN OF s_rep,
         pernr TYPE persno,       " Personal Number
         ktart TYPE abwko,        " Absence Quota Type
         year(4) TYPE n,          " Year
         anzhl TYPE ptm_quonum,   " Absence Entitlement days
         kverb TYPE kverb,        " Deduction Quota days
         anzhb TYPE ptm_quonum,   " Balance days
         ktext TYPE kotxt,        " Quota Type Text
         awart TYPE awart,        " Absence Type
         abrtg TYPE abrtg,        " Absence days
         ename TYPE emnam,        " employee Name
         atext TYPE abwtxt,       " Absence Type Text
         endda TYPE endda,        " End date
         begda TYPE begda,        " Begin date
       END OF s_rep.
Declaration of Variables
DATA : gv_atext TYPE abwtxt,              " Absence Type Text
       gv_ktext TYPE kotxt,               " Absence Type Text
       gv_title1   TYPE sylisel,          " Report title
       gv_year(4) TYPE c,                " Year
       gv_mon(2)   TYPE c,                " Month
       gv_hrs    TYPE abwtg,              " Hours
       gv_date   TYPE sydatum,            " Date
       gv_date1 TYPE sydatum,            " Date
       gv_dial.                           " Color flag
Declaration of Constants
CONSTANTS :
c_x      TYPE c VALUE 'X',               " Sign
c_1      TYPE persg   VALUE '1',         " Emp Group
c_pernr(8) TYPE n VALUE '00000000',      " Pernr
c_moabw TYPE moabw   VALUE '01',        " Per SA Grouping
c_mozko TYPE mozko   VALUE '01',        " Per SA Grouping
c_mopgk TYPE mopgk   VALUE '1',         " Emp SGrp Grouping
c_endda TYPE sydatum VALUE '99991231', " End Date
c_val1(2) TYPE c VALUE '31',             " Date Type
c_val2(2) TYPE c VALUE '12',             " Date Type
c_val    LIKE p0041-dar01 VALUE '01',    " Date Type
c_date1 LIKE sy-datum VALUE '18000101'. " Date
     I N T E R N A L T A B L E S D E C L A R A T I O N S
DATA: i_2001 TYPE STANDARD TABLE OF s_2001 WITH HEADER LINE,
      i_2006 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
      i_rep1 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
      i_rep TYPE STANDARD TABLE OF s_rep WITH HEADER LINE.
                 S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_ktart FOR t556a-ktart, " Absence Quota Type
                s_awart FOR t554s-subty. " Absence Type
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-003.   " Quota & Absence
PARAMETERS: p_qa RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-004.   " Quota
PARAMETERS: p_q RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-005.   " Absence
PARAMETERS: p_a RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN END OF BLOCK b2.
                  I N I T I A L I Z A T I O N                        *
INITIALIZATION.
              A T S E L E C T I O N - S C R E E N                   *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_screen.
               S T A R T - O F - S E L E C T I O N                   *
START-OF-SELECTION.
Selection of Period
PERFORM get_period.
Get PERNR from LDB
GET pernr.
IF p0000-stat2 <> '0'.
Get the data from PA0001,PA2001, PA2006
    PERFORM get_pers_data.
ENDIF.
               T O P - O F - P A G E                                 *
TOP-OF-PAGE.
Header of the List
PERFORM header.
               E N D - O F - P A G E                                 *
Footer
END-OF-PAGE.
IF p_qa = c_x.
Display both Absence and Quota Data
    WRITE /1(188) sy-uline.
ELSEIF p_q = c_x.
Display only Quota Data
    WRITE /1(114) sy-uline.
ELSEIF p_a = c_x.
Display only Absence Data
    WRITE /1(125) sy-uline.
ENDIF.
               E N D - O F - S E L E C T I O N                       *
END-OF-SELECTION.
Combine the Absence and Quota Data
PERFORM append_data.
IF p_qa = c_x.
Display both Absence and Quota Data
    PERFORM display_qa_data.
ELSEIF p_q = c_x.
Display only Quota Data
    PERFORM display_q_data.
ELSEIF p_a = c_x.
Display only Absence Data
    PERFORM display_a_data.
ENDIF.
*&      Form validate_screen
Validation of Selection Screen fields
FORM validate_screen .
Validation of Personnel Number
CLEAR pa0003.
IF NOT pnppernr[] IS INITIAL.
    SELECT pernr
    FROM pa0003 UP TO 1 ROWS
      INTO pa0003-pernr
      WHERE pernr IN pnppernr.
    ENDSELECT.
    IF sy-subrc <> 0.
      MESSAGE e999 WITH 'Incorrect Personnel Number'(006).
    ENDIF.
ENDIF.
Validation of Employee Status
CLEAR t529u.
IF NOT pnpstat2[] IS INITIAL.
    SELECT SINGLE statv
      INTO t529u-statv
      FROM t529u
      WHERE statv IN pnpstat2 AND
            statn = '2' AND
            sprsl = sy-langu.
    IF sy-subrc <> 0.
      MESSAGE e999 WITH 'Invalid Employee Status'(007).
    ENDIF.
ENDIF.
Validation of Personnel Area
CLEAR t500p.
IF NOT pnpwerks[] IS INITIAL.
    SELECT persa
    FROM t500p UP TO 1 ROWS
      INTO t500p-persa
      WHERE persa IN pnpwerks.
    ENDSELECT.
    IF sy-subrc <> 0.
      MESSAGE e999 WITH 'Incorrect Personnel Area'(008).
    ENDIF.
ENDIF.
Validation of Personnel Sub Area
CLEAR t001p.
IF NOT pnpbtrtl[] IS INITIAL.
    SELECT btrtl
    FROM t001p UP TO 1 ROWS
      INTO t001p-btrtl
      WHERE btrtl IN pnpbtrtl.
    ENDSELECT.
    IF sy-subrc <> 0.
      MESSAGE e999 WITH 'Incorrect Personnel Sub Area'(009).
    ENDIF.
ENDIF.
Validation of Employee Group
CLEAR t501.
IF NOT pnppersg[] IS INITIAL.
    SELECT persg
    FROM t501 UP TO 1 ROWS
      INTO t501-persg
      WHERE persg IN pnppersg.
    ENDSELECT.
    IF sy-subrc <> 0.
      MESSAGE e999 WITH 'Incorrect Employee Group'(010).
    ENDIF.
ENDIF.
Validation of Employee Sub Group
CLEAR t503k.
IF NOT pnppersk[] IS INITIAL.
    SELECT persk
    FROM t503k UP TO 1 ROWS
      INTO t503k-persk
      WHERE persk IN pnppersk.
    ENDSELECT.
    IF sy-subrc <> 0.
      MESSAGE e999 WITH 'Incorrect Employee Sub Group'(011).
    ENDIF.
ENDIF.
Validation of Payroll Area
CLEAR t549a.
IF NOT pnpabkrs[] IS INITIAL.
    SELECT abkrs
    FROM t549a UP TO 1 ROWS
      INTO t549a-abkrs
      WHERE abkrs IN pnpabkrs.
    ENDSELECT.
    IF sy-subrc <> 0.
      MESSAGE e999 WITH 'Incorrect Employee Payroll Area'(026).
    ENDIF.
ENDIF.
Validation of Absence Type
CLEAR t554s.
IF NOT s_awart[] IS INITIAL.
    SELECT subty
    FROM t554s UP TO 1 ROWS
      INTO t554s-subty
      WHERE subty IN s_awart AND
            moabw EQ c_moabw AND
            endda EQ c_endda.
    ENDSELECT.
    IF sy-subrc <> 0.
      MESSAGE e999 WITH 'Incorrect Employee Absence Type'(012).
    ENDIF.
ENDIF.
Validation of Absence Quota Type
CLEAR t556a.
IF NOT s_ktart[] IS INITIAL.
    SELECT ktart
    FROM t556a UP TO 1 ROWS
      INTO t556a-ktart
      WHERE ktart IN s_ktart AND
            mopgk EQ c_mopgk AND
            mozko EQ c_mozko AND
            endda EQ c_endda.
    ENDSELECT.
    IF sy-subrc <> 0.
      MESSAGE e999 WITH 'Incorrect Employee Quota Type'(013).
    ENDIF.
ENDIF.
ENDFORM.                  "validate_screen
*&      Form get_period
Get the Correct Period based on Selection screen selection
FORM get_period.
CLEAR: gv_year,gv_mon, gv_date, gv_date1.
gv_year = sy-datum+0(4).
gv_mon = sy-datum+4(2).
IF pnptimr1 = c_x.      " Current Date
    pnpbegda = sy-datum.
    pnpendda = sy-datum.
ELSEIF pnptimr2 = c_x. " Current Month
    CONCATENATE gv_year gv_mon c_val INTO gv_date.
    CONCATENATE gv_year gv_mon c_val1 INTO gv_date1.
    pnpbegda = gv_date.
    pnpendda = gv_date1.
ELSEIF pnptimr3 = c_x. " Current Year
    CONCATENATE gv_year c_val c_val INTO gv_date.
    CONCATENATE gv_year c_val2 c_val1 INTO gv_date1.
    pnpbegda = gv_date.
    pnpendda = gv_date1.
ELSEIF pnptimr4 = c_x. " Upto Today
    pnpbegda = c_date1.
    pnpendda = sy-datum.
ELSEIF pnptimr5 = c_x. " From Today
    pnpbegda = sy-datum.
    pnpendda = c_endda.
ELSE.
    IF ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
      pnpbegda = c_date1.
      pnpendda = c_endda.
    ELSEIF pnpbegda IS INITIAL AND NOT pnpendda IS INITIAL.
      pnpbegda = c_date1.
      pnpendda = pnpendda.
    ELSEIF NOT ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
      pnpbegda = pnpbegda.
      pnpendda = pnpendda.
    ENDIF.
ENDIF.
ENDFORM.              "get_period
*&      Form get_pers_data
Get the Absence and Quota Data from PA0001,PA2001,PA2006
FORM get_pers_data.
DATA: lv_year1(4) TYPE n,
        lv_year2(4) TYPE n,
        lv_date1 TYPE sydatum,
        lv_date2 TYPE sydatum,
        lv_anzhb TYPE ptm_quonum.   " Last Year Balance days
Get data from Respective Infotypes
rp_provide_from_last p0001 space pnpbegda pnpendda.
Absence Data
LOOP AT p2001 WHERE pernr = pernr-pernr AND
                      begda GE pnpbegda   AND
                      endda LE pnpendda.
    IF p2001-awart IN s_awart.
      i_2001-pernr    = pernr-pernr.
      i_2001-subty    = p2001-subty.
      i_2001-awart    = p2001-awart.
      i_2001-abrtg    = p2001-abrtg.
      i_2001-begda    = p2001-begda.
      i_2001-endda    = p2001-endda.
      READ TABLE p0001 WITH KEY pernr = p2001-pernr.
      i_2001-ename    = p0001-ename.
Get the Absence Type Text
      CLEAR gv_atext.
      SELECT SINGLE atext INTO gv_atext FROM t554t
              WHERE sprsl = sy-langu AND
                    moabw = c_moabw AND
                    awart = p2001-awart.
      IF sy-subrc = 0.
        i_2001-atext = gv_atext.
      ENDIF.
      APPEND i_2001.
      CLEAR i_2001.
    ENDIF.
ENDLOOP.
Quota Data
LOOP AT p2006 WHERE pernr = pernr-pernr AND
                      begda GE pnpbegda   AND
                      endda LE pnpendda.
    IF p2006-ktart IN s_ktart.
      i_2006-pernr    = pernr-pernr.
      i_2006-subty    = p2006-subty.
      i_2006-begda    = p2006-begda.
      i_2006-endda    = p2006-endda.
      i_2006-year     = p2006-endda+0(4).
      i_2006-ktart    = p2006-ktart.
      i_2006-anzhl    = p2006-anzhl.
      i_2006-kverb    = p2006-kverb.
      i_2006-anzhb    = p2006-anzhl - p2006-kverb.
      READ TABLE p0001 WITH KEY pernr = p2001-pernr.
      i_2006-ename    = p0001-ename.
Get the Quota Type Text
      CLEAR gv_ktext.
      SELECT SINGLE ktext INTO gv_ktext FROM t556b
              WHERE sprsl = sy-langu AND
                    mopgk = c_mopgk AND
                    mozko = c_mozko AND
                    ktart = p2006-ktart.
      IF sy-subrc = 0.
        i_2006-ktext = gv_ktext.
      ENDIF.
      APPEND i_2006.
      CLEAR i_2006.
    ENDIF.
ENDLOOP.
For Vacation Quota (80) get the Balance of the Last Year and
add to the Current Year Quota
LOOP AT i_2006.
    IF i_2006-ktart = '80'.
      lv_year1 = i_2006-endda+0(4).
      lv_year2 = lv_year1 - 1.
      CONCATENATE lv_year2 '01' '01' INTO lv_date1.
      CONCATENATE lv_year2 '12' '31' INTO lv_date2.
      LOOP AT p2006 WHERE pernr = i_2006-pernr AND
                          begda GE lv_date1    AND
                          endda LE lv_date2    AND
                          ktart = '80'.
        lv_anzhb = p2006-anzhl - p2006-kverb.
        i_rep1-pernr = i_2006-pernr.
        i_rep1-ktext = i_2006-ktext.
        i_rep1-anzhl = p2006-anzhl.
        i_rep1-kverb = p2006-kverb.
        i_rep1-ename = i_2006-ename.
        i_rep1-begda = p2006-begda.
        i_rep1-endda = p2006-endda.
        i_rep1-anzhb = lv_anzhb.
        i_rep1-ktart = '80'.
        i_rep1-year = lv_year2.
        APPEND i_rep1.
        CLEAR: i_rep1.
      ENDLOOP.
    ENDIF.
    CLEAR: lv_year1, lv_year2,
           lv_date1, lv_date2,lv_anzhb.
ENDLOOP.
SORT i_rep1 BY pernr ktart.
ENDFORM.          "get_pers_data
*&      Form append_data
Put the Absence and Quota Data into one Report Int Table
FORM append_data.
CLEAR:   i_rep.
REFRESH: i_rep.
SORT i_2001 BY pernr awart.
SORT i_2006 BY pernr ktart year.
Move I_REP1 data into i_2006
LOOP AT i_rep1.
    MOVE-CORRESPONDING i_rep1 TO i_2006.
    APPEND i_2006.
    CLEAR i_2006.
ENDLOOP.
Move the Absence and Quota Data into a final Int Table
LOOP AT i_2006.
    i_rep-pernr = i_2006-pernr.
    i_rep-ename = i_2006-ename.
    i_rep-ktart = i_2006-ktart.
    i_rep-anzhl = i_2006-anzhl.
    i_rep-kverb = i_2006-kverb.
    i_rep-ktext = i_2006-ktext.
    i_rep-anzhb = i_2006-anzhb.
    i_rep-year = i_2006-year.
    CLEAR i_2001.
    CASE i_2006-ktart.
      WHEN '81'.
        PERFORM get_2001 USING i_2006-pernr '1000' i_2006-year.
      WHEN '50'.
        PERFORM get_2001 USING i_2006-pernr '1002' i_2006-year.
      WHEN '80'.
        PERFORM get_2001 USING i_2006-pernr '1001' i_2006-year.
      WHEN '56'.
        PERFORM get_2001 USING i_2006-pernr '1003' i_2006-year.
      WHEN '51'.
        PERFORM get_2001 USING i_2006-pernr '1004' i_2006-year.
      WHEN '52'.
        PERFORM get_2001 USING i_2006-pernr '1005' i_2006-year.
      WHEN '54'.
        PERFORM get_2001 USING i_2006-pernr '1006' i_2006-year.
      WHEN '53'.
        PERFORM get_2001 USING i_2006-pernr '1007' i_2006-year.
      WHEN '55'.
        PERFORM get_2001 USING i_2006-pernr '1008' i_2006-year.
      WHEN '57'.
        PERFORM get_2001 USING i_2006-pernr '1009' i_2006-year.
      WHEN '90'.
        PERFORM get_2001 USING i_2006-pernr '2000' i_2006-year.
      WHEN '58'.
        PERFORM get_2001 USING i_2006-pernr '2001' i_2006-year.
      WHEN '59'.
        PERFORM get_2001 USING i_2006-pernr '2002' i_2006-year.
      WHEN '91'.
        PERFORM get_2001 USING i_2006-pernr '2003' i_2006-year.
    ENDCASE.
    IF sy-subrc <> 0.
      APPEND i_rep.
    ENDIF.
    CLEAR i_rep.
ENDLOOP.
SORT i_rep BY pernr ktart year.
DELETE i_rep WHERE pernr = ' '.
ENDFORM.              " append_data
*&      Form display_qa_data
Display the Absence and Quota Data
FORM display_qa_data.
DATA: lv_flag,                   " New Flag
        lv_tot2 TYPE ptm_quonum.   " Absence Balance days
IF i_rep[] IS INITIAL.
    MESSAGE i000 WITH 'No Data found'(014).
ELSE.
    LOOP AT i_rep.
toggle color
      PERFORM toggle_color.
      IF lv_flag <> space.
        NEW-LINE.
      ENDIF.
      AT NEW pernr.
        READ TABLE i_rep INDEX sy-tabix.
        WRITE:/1 sy-vline,2(8) i_rep-pernr,
          10 sy-vline,11(40)   i_rep-ename.
      ENDAT.
      AT NEW ktart.
        READ TABLE i_rep INDEX sy-tabix.
        WRITE: 1 sy-vline, 10 sy-vline,
          51 sy-vline,52(25)   i_rep-ktext.
      ENDAT.
      AT NEW year.
        READ TABLE i_rep INDEX sy-tabix.
        WRITE: 1 sy-vline, 10 sy-vline,
              51 sy-vline,
              77 sy-vline, 78(4) i_rep-year,
              82 sy-vline, 83(11) i_rep-anzhl,
              94 sy-vline, 95(25) i_rep-atext,
             120 sy-vline,133 sy-vline,
             144 sy-vline,
             155 sy-vline,156(13) i_rep-anzhb,
             169 sy-vline.
      lv_tot2 = lv_tot2 + i_rep-anzhb.
      ENDAT.
      WRITE: 1 sy-vline, 10 sy-vline,
            51 sy-vline, 77 sy-vline,
            82 sy-vline, 94 sy-vline,
           120 sy-vline,121(12) i_rep-abrtg NO-ZERO,
           133 sy-vline,134(10) i_rep-begda NO-ZERO,
           144 sy-vline,145(10) i_rep-endda NO-ZERO,
           155 sy-vline,169 sy-vline.
      NEW-LINE.
      AT END OF pernr.
        WRITE : /1(169) sy-uline.
        SUM.
        FORMAT COLOR 3.
        WRITE:/1 sy-vline,   10 sy-vline,
              51 sy-vline,   77 sy-vline,
              82 sy-vline,   94 sy-vline,
             120 sy-vline,121(12) i_rep-abrtg,
             133 sy-vline,144 sy-vline,
             155 sy-vline, 156(13) lv_tot2,
             169 sy-vline.
        FORMAT COLOR OFF.
        WRITE : /1(169) sy-uline.
        CLEAR lv_tot2.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.              " display_qa_data
*&      Form display_q_data
Display only the Quota Data
FORM display_q_data.
DATA: lv_flag.               " New Flag
SORT i_2006 BY pernr ktart year.
IF i_2006[] IS INITIAL.
    MESSAGE i000 WITH 'No Data found'(014).
ELSE.
    LOOP AT i_2006.
Toggle Color
      PERFORM toggle_color.
      IF lv_flag <> space.
        NEW-LINE.
      ENDIF.
      AT NEW pernr.
        READ TABLE i_2006 INDEX sy-tabix.
        WRITE: /1 sy-vline, 2(8) i_2006-pernr,
               10 sy-vline,11(40) i_2006-ename.
      ENDAT.
      AT NEW ktart.
        READ TABLE i_2006 INDEX sy-tabix.
        WRITE: 1 sy-vline,10 sy-vline,
              51 sy-vline,52(25) i_2006-ktext.
      ENDAT.
      AT NEW year.
        READ TABLE i_2006 INDEX sy-tabix.
        WRITE: 1 sy-vline, 10 sy-vline,
              51 sy-vline,
              77 sy-vline,78(4) i_2006-year,
              82 sy-vline,83(11) i_2006-anzhl,
              94 sy-vline,95(13) i_2006-anzhb,
             108 sy-vline.
        NEW-LINE.
      ENDAT.
      AT END OF pernr.
        WRITE : /1(108) sy-uline.
        SUM.
        FORMAT COLOR 3.
        WRITE: /1 sy-vline, 10 sy-vline,
               51 sy-vline,
               77 sy-vline, 82 sy-vline,
               94 sy-vline, 95(13) i_2006-anzhb,
              108 sy-vline.
        FORMAT COLOR OFF.
        WRITE : /1(108) sy-uline.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.              " display_q_data
*&      Form display_a_data
Display Only the Absence Quota
FORM display_a_data.
DATA: lv_flag.               " New Flag
SORT i_2001 BY pernr awart.
IF i_2001[] IS INITIAL.
    MESSAGE i000 WITH 'No Data found'(014).
ELSE.
    LOOP AT i_2001.
Toggle Color
      PERFORM toggle_color.
      IF lv_flag <> space.
        NEW-LINE.
      ENDIF.
      AT NEW pernr.
        READ TABLE i_2001 INDEX sy-tabix.
        WRITE: /1 sy-vline, 2(10) i_2001-pernr,
               10 sy-vline,11(40) i_2001-ename.
      ENDAT.
      WRITE: 1 sy-vline, 10 sy-vline,
              51 sy-vline,52(25) i_2001-atext,
              77 sy-vline,78(12) i_2001-abrtg,
              90 sy-vline,91(10) i_2001-begda,
             101 sy-vline,102(10) i_2001-endda,
             112 sy-vline.
      NEW-LINE.
      AT END OF pernr.
        WRITE : /1(112) sy-uline.
        SUM.
        FORMAT COLOR 3.
        WRITE: /1 sy-vline, 10 sy-vline,
               51 sy-vline,
               77 sy-vline,78(12) i_2001-abrtg,
               90 sy-vline,101 sy-vline,
              112 sy-vline.
        FORMAT COLOR OFF.
        WRITE : /1(112) sy-uline.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.              " display_a_data
*&      Form header
Write the Report Header
FORM header .
data : lv_pers type pbtxt,
         lv_orgn type orgtx.
gv_title1 = sy-title.              " Set List Header
IF p_qa = c_x.
    NEW-PAGE LINE-SIZE 193.
ELSEIF p_a = c_x.
    NEW-PAGE LINE-SIZE 125.
ELSEIF p_q = c_x.
    NEW-PAGE LINE-SIZE 119.
ENDIF.
Standard header
FORMAT RESET.
CALL FUNCTION 'Z_STANDARD_HEADER'
    EXPORTING
      title1 = gv_title1.
Get the Personal Area and Org.Unit Texts
clear : lv_pers,lv_orgn.
select single name1 into lv_pers
    from t500p where persa = pnpwerks-low.
select single orgtx into lv_orgn
    from t527x where sprsl = sy-langu and
                     orgeh = pnporgeh-low and
                     endda = c_endda.
if not lv_pers is initial.
    write : /2 'Personal Area:'(017), 17(25) lv_pers color 7.
endif.
if not lv_orgn is initial.
    write : /2 'Organization Unit:'(021), 20(25) lv_orgn color 3.
endif.
IF p_qa = c_x.
    FORMAT COLOR COL_HEADING.
    WRITE : /1(169) sy-uline.
    WRITE:/1 sy-vline,2(8)    'Emp.No'(015) CENTERED,
          10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
          51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
          77 sy-vline,78(4)   'Year'(027),
          82 sy-vline,83(11) 'Entitlement'(019),
          94 sy-vline,95(25) 'Absence Description'(022) CENTERED,
         120 sy-vline,121(12) 'Absence days'(023),
         133 sy-vline,134(10) 'From Date'(024),
         144 sy-vline,145(10) 'To Date'(025),
         155 sy-vline,156(13) 'Quota Balance'(020),
         169 sy-vline.
    WRITE : /1(169) sy-uline.
ELSEIF p_q = c_x.
    FORMAT COLOR COL_HEADING.
    WRITE : /1(108) sy-uline.
    WRITE:/1 sy-vline,2(8)   'Emp.No'(015) CENTERED,
          10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
          51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
          77 sy-vline,78(4) 'Year'(027),
          82 sy-vline,83(11) 'Entitlement'(019),
          94 sy-vline,95(13) 'Quota Balance'(020),
         108 sy-vline.
    WRITE : /1(108) sy-uline.
ELSEIF p_a = c_x.
    FORMAT COLOR COL_HEADING.
    WRITE : /1(112) sy-uline.
    WRITE:/1 sy-vline,2(8)    'Emp.No'(015) CENTERED,
          10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
          51 sy-vline,52(25) 'Absence Description'(022) CENTERED,
          77 sy-vline,78(12) 'Absence days'(023),
          90 sy-vline,91(10) 'From Date'(024),
         101 sy-vline,102(10) 'To Date'(025),
         112 sy-vline.
    WRITE : /1(112) sy-uline.
ENDIF.
ENDFORM.                    " header
*&      Form toggle_color
This routine alters the color of the records in the list
FORM toggle_color.
IF gv_dial = space.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    gv_dial = c_x.
ELSE.
    FORMAT COLOR 1 INTENSIFIED OFF.
    CLEAR gv_dial.
ENDIF.
ENDFORM.                    " toggle_color
*&      Form get_2001
Get the ABsence type for each Quota type
FORM get_2001 USING p_pernr TYPE persno
                    p_value TYPE awart
                    p_year.
LOOP AT i_2001 WHERE pernr = p_pernr AND
                       awart = p_value AND
                       endda+0(4) = p_year.
    i_rep-awart = i_2001-awart.
    i_rep-abrtg = i_2001-abrtg.
    i_rep-atext = i_2001-atext.
    i_rep-begda = i_2001-begda.
    i_rep-endda = i_2001-endda.
    APPEND i_rep.
ENDLOOP.
ENDFORM.                                                    " get_2001
<b>Reward points for useful Answers</b>
Regards
Anji

Export data from a scanned form.

Hello
I have several forms that users will fill out and email back. The data can then be extracted using Adobe's forms tools. However, at times the form is returned either on paper or scanned.
Is there a way to extract the data from the scanned form? I am reading something about templates--I am not sure if that is the way I need to go. I only want to extract the data-such as name, address, etc. I am not wanting to convert to another format, such as word, etc.
If someone could direct me in the right direction, I would appreciate it.
Thank you in advance for your assistance!
I am using Adobe Acrobat Professional XI and LiveCycle Designer. Some of the forms are developed in Adobe, some in LiveCycle Designer.

Not in the same way. Printing and then scanning a form causes it to lose
all metadata, including the field objects.
The only way to do it at that point is to run OCR and then use a script
that looks for the data in the same locations where the fields used to be,
and export what it finds. This is not a simple task, though, and it's
likely the results will not be 100% correct.

Exporting data from R/3 system as IDOCs

As I am working with MDM and not familar with R/3 very much, is there any manual or baisic guidlines how to export master data as IDOCs from R/3 ?
Thank you in advance

Hi Vytas,
to send the data from R3 system to MDM System, you need to follow procedure as mentioned below:
1. you can use the transaction "MDMGX" in R3 system to extract the refrence data to the mdm system via FTP Server.generally this transaction is used to extract the lookup tables data into the repository.
for using this, you can use the option there in transaction MDMGX as "Define repositories and FTP Server" and configure all the required details and you have to install the ftp server on MDM server.then to extract the data, there is a option as "Start Extraction" and your data will be extracted from R3 to MDM inbound port via FTP Server.
for further details about MDMGX, you can refer SAP Note No-964991.
2. to extract the main table data from R3 to MDM, you can use the transaction "MDM_CLNT_EXTR".
for detail info about this transaction, just refer the SAP Note No.-836985, 1035601, 844558.
both transaction will be used for extracting the data from R3 to MDM as per your business requirement.
I hope, this will help you.
any further info, just let me know.
Regards,
Saurabh...
Reward with points if found helpful.

Exporting data from database tables to a XML file

Hi,
We want to export data from Oracle database tables to an XML
file. What tool can we use for this purpose, and how do we go
about it ?
Can we extract data only from an Oracle8 database, or can we
extract data from Oracle7.3 databases too ?
Any help in this regard would be appreciated.
Thanks
Dipanjan
null

Dipanjan (guest) wrote:
: Hi,
: We want to export data from Oracle database tables to an XML
: file. What tool can we use for this purpose, and how do we go
: about it ?
: Can we extract data only from an Oracle8 database, or can we
: extract data from Oracle7.3 databases too ?
: Any help in this regard would be appreciated.
: Thanks
: Dipanjan
Start by downloading the XML SQL Utility and make sure you have
the approriate JDBC 1.1 drivers installed for your database.
There are samples which will get you going included in the
archive.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

Exporting data from bw to sapr/3

hi
gurus
how to export data from bw to r/3 this data will of OLTP kind, it will be directly coming to bw from their it has to update into sapr/3 .. Most of the data will be of FI-GL kind,
please kindly forward me req douc to my mail id [email protected]
cheers

hi Naresh
Pls do Check the link may b it might help you
Function module searched: Data extraction from BW to R/3?
if yes assign points
SANJEEV KUMAR HAMSALA

Can not export data from form tracker

Hi there,
I have set up a lovely form for collecting data. It all comes into the Adobe Tracker and the Responses file fine.
What i wish to do is export data from the responses file into another format. I should be able to do it from the Export button on the left but it is 'blanked out' and does nothing if I push it. I can't find any details on here or the internet relating to this. And yes, there is data in the file to export .
Hoping you can help.
Many thanks in advance.

I have the same problem but... I created two forms for two separate purposes and have had responses to both.
One of them allows me to export the data and the other does not.
Does anyone out there have an answer for this seemingly random anomoly?
Regards
Sydman

Unable to extract the data from ECC 6.0 to PSA

Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanks

ECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks

Unable to export data from Web Access Data Sheet in Sharepoint to local excel or access file

Greetings and good morning.
I'm going to start off in broad terms with this question because I'm not 100 percent sure what information to provide.
Long story short, we've got a Web Access Data Sheet list hosted in a Sharepoint 2010 environment. It is accessed and used by multiple people throughout the day. It contains several thousand line item entries. I'd call it a large data sheet.
I think the size of the data sheet is casuign some instability in the list. I'd like to be able to export a defined range of data from the list into a local excel or access file. After that, I'd delete the stuff on the Access list to improve performance.
But...when I attempt to use the Sharepoint Action bar to export - Excel locks up/crashes. If I try to export to Access, I get a similar issue.
Any ideas? Could anyone begin by telling me what other information is required?

Hi,
If you would like to export data from Access Web Database in SharePoint 2010, you could go to Design With Access page in Settings. The url in my environment is http://sp/tt/_layouts/accsrv/ModifyApplication.aspx . Then choose the Table and export it to Excel
or Modify it in Access.
Regards,
Rebecca Tu
TechNet Community Support

Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.

I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support

Extract / Export Data from my IBM Cognos Applix TM1 to BW7 Oracle based

Similar Messages

Maybe you are looking for