Extraction and delete the source

Hi everybody,
I have a requirement where I have to extract the information of a table and after extracting it is necessary to delete all records on the source table.
Can I configure the generic extractor with this behavior? or how would be the best way to "attack" this requirement?
Thanks
FedeX
Message was edited by: FedeX

You could do this with extraction using a function module.
The function module would first extract an then delete the content.
Or you could do this from within your process chain.
The first step would extract the data.
The second step would call a program that raises an event in the remote (=source) system.
This event would then trigger a program in the remote system to delete the content.
Please assign points if this was helful.
Filip

Similar Messages

I'm organising my Aperture library today and I'm going to go through my photos folder, import the images to Aperture and then delete the original folders. Just curious if deleting the source folders is a big no-no or not.

Topic title basically sums it up.

Alright. For my case was, my source files are inside the Document folders. Since importing the pictures into Aperture, deleting the source files/folders did not cause any problems with Aperture.
Whether it is a good idea or would depend on how comforatble you are with the idea in the first place. On one hand you can save up precious hard disk space, while on the other if the Aperture library gets corrupted, you might lose everything. Of course, having a backup of the Aperture library helps, as well as a time machine backup of it. On top of that you can also have an Aperture Vault to backup the library to a external drive.
In summary i think a reasonlable backup plan is just as important regardless of whether or not the source file is in which location. For my case, i only have the Aperture library as all of my source. A time machine backs up everything including my library, in addition to that, i also use Aperture Vault to back up to another external drive just in case.

Refresh of BW System without deleting the source system

Hello experts
I want to know, is it possible to refresh BW system without deleting the source system.
That means I just do the renaming via BDLS and reconnect.
If I do so, do I have a post refresh activities.
According to OSS note 886102 and 184447, there are 3 scenarios:
Scenario A: You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group).
Scenario B: You want to copy a single BW system of the group, the sourcesystem is not copied.
Scenario C: You want to replace a single sourcesystem of a BW-system with another system using a database or client copy (Example: Refresh of the OLTP consolidation system by a copy of the OLTP production system). The BW system is not copied
Assuming I use Scenario A, can I refresh BW system without deleting the source system.

Hi:
The primary source of information is the how to paper on this topic:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
YOu are correct, you can refreh the BI system without deleting the source system.
Thanks for any points you assign (after all, I wrote the paper!).
Best Regards -
Ron Silberstein
SAP

Deleting the Source System

Hi All,
Can Anyone the consequences on deleting the source system in BI and steps to re-build once again, as i need to take up the activity. Generally what can be issues that crop up when deletion takes place..
<removed by moderator>
Regards,
Madhav
Edited by: Siegfried Szameitat on Dec 12, 2008 11:28 AM

Dear Linturi,
believe you trying to delete the current R/3 source system and trying for SAP BI my self source system right?
If yes
We can very well dete the source system
The impact would be in th efollowing ways
You will loose entire datasources,transfer rules and PSA related to that particular source system and it will be Major impcat on you Bi system which is not at all preferable untill unless you are really no more use of the R/3 source system and its configured with any of the bi pass clients.
Coming to BI Myself souce system : Which is purely realted to the DATA MART Loadings and its also a similar like R/3 source system connection you have to give ALEREMOTE passwords and serve ips.
Hope this helps u...
Best Regards,
VVenkat..

My options and tools have changed. Unable to extract and delete pages in my PDF document.

My options and tools have changed. Unable to extract and delete pages in my PDF document. How can I get them back?

Well could it be another Adobe I had before? I bought software and in that under tools on the far right had all kinds of options. Also under view and window. Then I bought another adobe product to try and convert a PDF into a word doc and now under tools that is all it wants to do and my view and window options have changed. Not to mention the new software i bought isn't converting it just spins. So I am bummed that neither is working for me. It is more important for me to be able to extract pages then it is to convert. Which adobe product allows this? Maybe I can unistall and reinstall the Adobe software I spent 300 dollars on vs the 19.99 product.

How can i relink files to the timeline sequence when i've deleted the source file path? All the attribute are still in the timeline, I just can't relink

So i started an edit and had the whole thing finished and ready to export in Final Cut X, when i went to export I had a message pop up say that it couldn't export while FCP X is still referencing media. I went through trying to solve the problem and ended up deleting the source media folders in the Final Cut Events folder and reimporting the clips. This lead to a whole can of worms opening up and now i'm left with a whole edit with 90% of the clips in the timeline unable to relink to source media.
Can anyone help?

First find the files. Then File>Relink Event Files and point to the folder.

Cluster Live Storage Migration completes without deleting the source virtual hard disk VHDX

Testing HV setup in a cluster of two nodes with shared FC storage. Storage is CSV on both nodes. Storage migration of a VM from C:\ClusterStorage\A to C:\ClusterStorage\B completes without any problem. Upon completion, the source VHDX
are still left at C:\ClusterStorage\A. The source files can be deleted manually. All is done through VMM "Migrate Storage" option. Why the storage migration does not delete the source files upon job completion? Thanks!

I have noticed this happens when the folders are "pre-staged". If I create a folder and then storage migrate all of the files into it then it will not delete from it. If I just put the files in the root of the CSV then it seems to work. I am
looking into the permissions of the system and seeing what changes on a folder when it is created by a user and not the system. This only appears to happen when I am doing some cleanup because of duplicate machine name subfolders recently that a tech created.
If you match the permissions to a system created VM it should work though.

Manual says ~If wanting to delete an event IT will also delete the source

I have a lot of stuff [Q time] on my desktop and wanted to use Final cut to whittle all of it down to just the footage I want to use. That being my way of getting more space on disk.
Tried and can do using just Q time BUT thought easier to import to Final cut, work upon and then export back to desk, for later use.
Is this stupid, don't know, the point being upon trying to do so I'm told that Final cut will also delete the source material, and i have some material already in an event which I now want to clear form Final cut, reason to start afresh~ clean slate etc, etc, BUT~ don't want to lose the original material.
Can anyone explain please~ 1] what is meant by source material and 2] how to best go about doing the above
REGARDS
LLOYD
aka Apple E ed {{{ oh and just how do I go about changing that Apple E ed for something else, will also be useful ... please }}}}

When you import media into an event in FCP X, it can be either copied (meaning a duplicate of your file will be created inside the event folder) or linked (which means that the event folder contains a very small "symlink" - similar to an alias - that points to your original file).
If you later delete the event, its folder will be deleted, and so will the copy or symlink of your media file, BUT in either case FCP X will NOT touch the original media file.
Maybe the misunderstanding came to be because FCP X stores these files or aliases inside the event, in a folder called "Original Media". Yes, that folder is destroyed, but NO, that folder does not contain the file from which you imported: it contains merely a copy of it, or a link to it.

Cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?

cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?

Not sure about yahoo, but for gmail, I done the following:
Set up using Exchange on iPhone, it'll keep prompting for password. On PC use captcha option, log in to gmail account from PC after completingg captcha option, enter password on iPhone.
See how that goes for gmail, let us know.
Hopefully someone will have fix for yahoo.

HT4915 When i did my itunes match, there were some duplicated albums and songs. I have gone into my library and deleted the duplicates, but they still show up on my iphone as duplicates. What can i do to get rid of them?

When I did my itunes match, there were some duplicated albums and songs in my library. I have gone back into my library from my computer, and deleted the duplicates. When I did so, itunes did not ask me if I wanted to delete them from the cloud. They are still showing up on my iphone as duplicates in the cloud. What can I do to get them from showing up in my iphone?

They are not on the iphone in the first place. It is just a setting that allows you to see the songs that are available in icloud, but not on your iphone. If you turn the setting to off, then you no longer see the songs that are in icloud, but NOT on your iphone.

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue.

I have an iphone 3g and my itunes wont back it up anymore. after the sync it says "itunes could not back up the iphone because the file has been corrupt or is not compatible with the device." i already went to prefrences and deleted the old back up file.

nothing works. ive also tried to update my phone and it tells me it cant reach the server and to check my network settings or try again later =[ i dont know what to do and im furious!

I banged my head on the wall with the same problem for two days. Tried everything mentioned, and this worked, finally. The problem is that the backup files are not where you think they are.
You need to delete the MobilSync backup folder. I have a Mac. Went to /Library/Application Support/MobileSync/Backup and deleted the Backup folder.
Fixed the problem. Give it a try and good luck!

Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one. How, help?? Phone is a 3GS

Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one. How, help?? Phone is a 3GS

So the answer to my question is yes - from an old Exchange account that was provided by a previous employer.
If so, you can't.
You can't merge or transfer contacts that were synced over the air with an Exchange account with another account, and the same for syncing the contacts direct with a supported address book app on your computer. This is how most employers want it.

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.

I inadvertently deleted the source tunes from my iMac. How do/can I restore them from my iCloud account?

I inadvertently deleted the source tunes from my iMac. How do/can I restore them from my iCloud account?

Welcome to the Alpple Community.
Your iCloud account doesn't have anything to do with iTunes. With iTunes in the cloud you can redownload tunes you have purchased from iTunes (select purchases from the list of options in the top right hand corner of the iTunes home page.
If you have iTunes match you can redownload all your tunes by clicking the cloud icon at the right of each listing.

Extraction and delete the source

Similar Messages

Maybe you are looking for