Extraction Error - 0EC_PCA_3 - Program on R/3 side missing

I installed the business content for 0EC_PCA_3 extractor on development system in R/3. Generated it in RSA6, and replicated to BW. Installed all BW objects and ran a full load for 1 month of data. Both that load and using the RSA3 extractor checker in R/3 short dump with the following message:
LOAD_PROGRAM_NOT_FOUND
Program "GP_GLX_GLPCW " not found
Message in the dump:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"G_BIW_GET_SI_DATA" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely "GP_GLX_GLPCW ".
However, program "GP_GLX_GLPCW " does not exist in the library.
So I need to know how to get this program that is a standard select program from the GLPCA table generated??
Thanks, Peggy

Hi Peggy,
It seems that this particular program is not available in the system right now. Just go the 'How to correct the error' part of the dump created when you try to view the data in RSA3. It will give you some key words for searching notes. Just search for notes using those keywords and I'm sure you will find a note which will have the necessary program correction. I have had this issue with some other data sources earlier and thats how it was resolved. Hope this will be helpful. Thanks.
Sumit

Similar Messages

Syntax error in program "SAPLXRSA " -SENT

Hi Guys,
I have done user exit in R/3 datasource when I do the test extraction using RSA3 and geting the data without any error. I've transport the requet to Test Box and tried to do the extraction in TestBox and getting the below SYNTAX Error message. Kindly advise it's very URGET. Thanks in advance.
ShrtText
Syntax error in program "SAPLXRSA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLRSAP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXRSA ", the following syntax error occurred
in the Include "ZXRSAU01 " in line 21:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
Author and last person to change the Include are:
Author "SAPCHEOLENG "
Last changed by "CCEV200 "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXRSA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXRSA ", the following syntax error occurred:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "hawk"
Network address.......... "137.132.12.22"
Operating system......... "HP-UX"
Release.................. "B.11.23"
Hardware type............ "ia64"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "hawk"
Database type............ "ORACLE"
Database name............ "QAS"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "Oct 16 2006 20:35:55"
Created in............... "HP-UX B.11.23 U ia64"
Database version......... "OCI_920 "
Patch level.............. "153"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
Memory usage.............
Roll..................... 16128
EM....................... 12569760
Heap..................... 0
Page..................... 65536
MM Used.................. 1716768
MM Free.................. 2470608
SAP Release.............. "640"
User and Transaction
Client.............. 220
User................ "CCEENGG"
Language key........ "E"
Transaction......... "RSA3 "
Program............. "SAPLRSAP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLRSAP" in
"CALL_DATA_CUSTOMER_FUNCTION".
The main program was "RSFHGEN2 ".
The termination occurred in line 96 of the source code of the (Include)
program "LRSAPF06"
of the source code of program "LRSAPF06" (when calling the editor 960).
Source Code Extract
Line
SourceCde
66
CALL FUNCTION BW_BTE_CALL_BW204010_E
67
EXPORTING
68
I_DATASOURCE = L_DATASOURCE
69
I_UPDMODE    = P_UPDMODE
70
TABLES
71
I_T_SELECT   = P_T_SELECT
72
I_T_FIELDS   = P_T_FIELDS
73
C_T_DATA     = P_T_DATA
74
C_T_MESSAGES = L_T_MESSAGES
75
EXCEPTIONS
76
OTHERS       = 1.
77
DESCRIBE TABLE P_T_DATA LINES L_LINES.
78
MESSAGE S408 WITH L_LINES.
79
Handle BTE-Exit error messages
80
IF SY-SUBRC <> 0.
81
P_SUBRC = SY-SUBRC.
82
IF 1 = 2. MESSAGE E021 WITH ''. ENDIF.
83
MESSAGE_WRITE 'E' 'R3' '021' 'BW_BTE_CALL_BW204010_E' '' '' ''.
84
ENDIF.
85
IF NOT L_T_MESSAGES IS INITIAL.
86
PERFORM WRITE_BTE_EXIT_MESSAGES TABLES   L_T_MESSAGES
87
CHANGING P_SUBRC.
88
ENDIF.
89
ENDIF.
90
ENDIF.
91
92
Call Customer-Exit
93
DESCRIBE TABLE P_T_DATA LINES L_LINES.
94
MESSAGE S407 WITH 'EXIT_SAPLRSAP_001' 'CMOD' L_LINES.
95
CLEAR SY-SUBRC.
>>>>>
CALL CUSTOMER-FUNCTION '001'
97
EXPORTING
98
I_DATASOURCE             = L_DATASOURCE
99
I_ISOURCE                = L_12B_SOURCE
100
I_UPDMODE                = P_UPDMODE
101
TABLES
102
I_T_SELECT               = P_T_SELECT
103
I_T_FIELDS               = P_T_FIELDS
104
C_T_DATA                 = P_T_DATA
105
C_T_MESSAGES             = L_T_MESSAGES
106
EXCEPTIONS
107
RSAP_CUSTOMER_EXIT_ERROR = 1
108
OTHERS                   = 2.
109
DESCRIBE TABLE P_T_DATA LINES L_LINES.
110
MESSAGE S408 WITH L_LINES.
111
112
Handle Customer-Exit error messages
113
IF SY-SUBRC <> 0.
114
P_SUBRC = SY-SUBRC.
115
IF 1 = 2. MESSAGE E020 WITH ''. ENDIF.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report for the extractor call
SY-MSGTY
S
SY-MSGID
R3
SY-MSGNO
407
SY-MSGV1
EXIT_SAPLRSAP_001
SY-MSGV2
CMOD
SY-MSGV3
100
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
5 FUNCTION     SAPLRSAP                            LRSAPF06                               96
CALL_DATA_CUSTOMER_FUNCTION
4 FORM         SAPLRSAP                            LRSAPF06                               96
CALL_DATA_CUSTOMER_FUNCTION
3 FORM         GP3PDR0GQDXJ0ZOA35DPGNCU80M         GP3PDR0GQDXJ0ZOA35DPGNCU80M           274
PROCESS_DATA_PACKAGE
2 FORM         GP3PDR0GQDXJ0ZOA35DPGNCU80M         GP3PDR0GQDXJ0ZOA35DPGNCU80M           170
DATA_TRANSFER
1 EVENT        RSFHGEN2                            RSFHGEN2                               59
START-OF-SELECTION

Hello Raja,
I think some objects should still lying in the dev. server which are yet to be transported, also try to deactivate and reactivate the project for user exit for BW and transport it .
Also manually request can be created for transporting object "ZOXPRO0043" into quality environment and transport it .
Let us know the output for the same.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

Abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_dire

HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
Harika

Dear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini

!!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

Hi Gurus,
Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
In the log i am getting following error message:
"System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Message no. BRAIN299".
Please help urgent.
FYI.....
we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
Points will surely be awarded.
Thanks,
Anurag

Hello Anurag,
Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
Regards,
Neha

Syntax error in program "SAPLHTTPTREE " during application of SAPKB70012

Hi everyone,
I am applying support pack SAPKB70012 when it stopped in the XPRA_EXECUTION phase. Anybody encountered this error "Syntax error in program "SAPLHTTPTREE "? Been looking for any notes on this but haven't found anything. I already created message to SAP but even though its high, nobody's picking it up. We're using Windows NT and database MSSQL.
Below is part of the import queue log:
The following details help you to analyze the problem:
    -   Error in phase: XPRA_EXECUTION
    -   Reason for error: TP_STEP_FAILURE
    -   Return code: 0012
    -   Error message: OCS Package SAPKB70012, tp step R, return code
        0012
Notes on phase XPRA_EXECUTION
The XPRAs and after-import methods are executed in this phase. This
phase can terminate due to the following reasons:
o   TP_INTERFACE_FAILURE: The system was unable to call the tp
    interface.
o   TP_FAILURE: The system was unable to execute the tp program. For
    more information, see the SLOG or ALOG log file.
When I check SM37, I found this ABAP runtime error:
*job: RDDEXEC
Runtime Errors         SYNTAX_ERROR
Date and Time          16.01.2008 19:13:09
Short text
Syntax error in program "SAPLHTTPTREE ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSCTS_EXE_EXP" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLHTTPTREE " in include
"LHTTPTREETOP " in
line 9:
""ICFALIAS" must be a flat structure. You cannot use internal tables, s"
"trings, references, or structures as components ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLHTTPTREE ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program SAPLHTTPTREE :
""ICFALIAS" must be a flat structure. You cannot use internal tables, s"
"trings, references, or structures as components ."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "0224C4DC1741F1C28D9D001A4BDB2C98"
Program............. "SAPLSCTS_EXE_EXP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLSCTS_EXE_EXP" - in
"CALL_IMP_METHODS_IN_CLIENT".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 351
of the (Include) program "LSCTS_EXE_EXPF02".
The program "SAPLSCTS_EXE_EXP" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 19130500
Source Code Extract
Line
SourceCde
321
CLEAR: sy-msgid, sy-msgty, sy-msgno.
322
323
IF ps_spec_pars-with_data_file EQ 'X'.
324
CALL FUNCTION ps_method_call-method_fb
325
EXPORTING
326
iv_tarclient = ps_client-client
327
iv_is_upgrade = pv_is_upgrade
328
iv_datafile   = ps_spec_pars-data_file
329
TABLES
330
tt_e071       = lt_e071
331
tt_e071k      = lt_e071k.
332
ELSEIF ps_spec_pars-with_asynch_mode EQ 'X'.
333
CALL FUNCTION ps_method_call-method_fb
334
EXPORTING
335
iv_tarclient    = ps_client-client
336
iv_is_upgrade   = pv_is_upgrade
337
iv_asynchronous = ps_spec_pars-asynch_mode
338
TABLES
339
tt_e071         = lt_e071
340
tt_e071k        = lt_e071k.
341
ELSEIF ps_spec_pars-with_cl_results EQ 'X'.
342
CALL FUNCTION ps_method_call-method_fb
343
EXPORTING
344
iv_trkorr     = pv_trkorr
345
iv_is_upgrade = pv_is_upgrade
346
it_e071       = lt_e071
347
it_e071k      = lt_e071k
348
CHANGING
349
it_client     = ps_spec_pars-clients.
350
ELSE.
>>>>>
CALL FUNCTION ps_method_call-method_fb
352
EXPORTING
353
iv_tarclient = ps_client-client
354
iv_is_upgrade = pv_is_upgrade
355
TABLES
356
tt_e071       = lt_e071
357
tt_e071k      = lt_e071k.
358
ENDIF.
359
360
361
reset info on called method in memory.
362
CALL FUNCTION 'TRINT_RESET_STACK_KILLER'.
363
check if method call has deleted variables in global memory
364
and set those variables again
365
CALL FUNCTION 'TRINT_CHECK_VARS_IN_MEMORY'
366
IMPORTING
367
ev_ok = lv_ok.
368
IF lv_ok = ' '.
369
memory destroyed: set all clients to errornous for security
370
for methods of switch framework
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
2
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
ASYNCH_IAC_PUBLISH
SY-MSGV2
0011
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080116
SY-UZEIT
191309
SY-XPROG
SAPLSYST
SY-XFORM
SYSTEM_HOOK_OPEN_DATASET
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
5 FUNCTION     SAPLSCTS_EXE_EXP                    LSCTS_EXE_EXPF02                      351
CALL_IMP_METHODS_IN_CLIENT
4 FORM         SAPLSCTS_EXE_EXP                    LSCTS_EXE_EXPF02                      351
CALL_IMP_METHODS_IN_CLIENT
3 FORM         SAPLSCTS_EXE_EXP                    LSCTS_EXE_EXPF02                       87
CALL_IMP_METHODS
2 FUNCTION     SAPLSCTS_EXE_EXP                    LSCTS_EXE_EXPU02                      103
TRINT_CALL_AFTER_IMP_METHOD
1 EVENT        RDDEXECU                            RDDEXECU                              171
START-OF-SELECTION
Chosen variables
Name
Val.
No.       5 Ty.          FUNCTION
Name CALL_IMP_METHODS_IN_CLIENT
GC_GNS_NO_DIFF
/0*/
2322222222
F0AF000000
0000000000
0000000000
LT_E071
Table IT_137[21x360]
FUNCTION-POOL=SCTS_EXE_EXPFORM=CALL_IMP_METHODS_IN_CLIENTDATA=LT_E071
Table reference: 46
TABH+ 0(20) = B0A6D957FE07000050C8D957FE07000000000000
TABH+ 20(20) = 2E000000890000001500000068010000FFFFFFFF
TABH+ 40(16) = 044D0000F00B000015000000C9248001
store        = 0xB0A6D957FE070000
ext1         = 0x50C8D957FE070000
shmId        = 0     (0x00000000)
id           = 46    (0x2E000000)
label        = 137   (0x89000000)
fill         = 21    (0x15000000)
leng         = 360   (0x68010000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000049
occu         = 21    (0x15000000)
access       = 1     (ItAccessStandard)
idxKind      = 1     (ItIndexLinear)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0xF0C0E257FE070000
pgHook       = 0x0000000000000000
idxPtr       = 0x10A7D957FE070000
shmTabhSet   = 0x0000000000000000
id           = 111   (0x6F000000)
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 21    (0x15000000)
lineAlloc    = 21    (0x15000000)
shmVersId    = 0     (0x00000000)
shmRefCount = 2     (0x02000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x90C4D957FE070000
collHook     = 0x0000000000000000
ext2         = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
GC_GNS_NO_SPECIFIC
2222222222
FAF0000000
0000000000
0000000000
LT_E071K
Table[initial]
RELSET
RNO
544
2EF
000
000
PS_SPEC_PARS-WITH_CL_RESULTS
2
0
0
0
SY-XPROG
SAPLSYST
5454555522222222222222222222222222222222
310C393400000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
PS_METHOD_CALL-METHOD_FB
SICF_AFTER_IMPORT
544454454554454552222222222222
3936F16452F9D0F240000000000000
000000000000000000000000000000
000000000000000000000000000000
GC_PARTNRPR_BACK_TO_STNDRD
1A&1B&1H&1I&2I&3R
34234234234234235
11612618619629632
00000000000000000
00000000000000000
PV_IS_UPGRADE
2
0
0
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PV_TRKORR
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
SYST-REPID
SAPLSCTS_EXE_EXP
5454545554545455222222222222222222222222
310C3343F585F580000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
DEVC_PREFIXNS
N
4
E
0
0
PS_SPEC_PARS-CLIENTS
Table[initial]
%_PRINT
000                                                                                0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_CLIENT-CLIENT
222
000
000
000
%_DUMMY$$
2222
0000
0000
0000
No.       4 Ty.          FORM
Name CALL_IMP_METHODS_IN_CLIENT
LT_E071
Table IT_137[21x360]
LT_E071K
Table[initial]
PS_SPEC_PARS-WITH_CL_RESULTS
2
0
0
0
PS_METHOD_CALL-METHOD_FB
SICF_AFTER_IMPORT
544454454554454552222222222222
3936F16452F9D0F240000000000000
000000000000000000000000000000
000000000000000000000000000000
PV_IS_UPGRADE
2
0
0
0
PV_TRKORR
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
PS_SPEC_PARS-CLIENTS
Table[initial]
PS_CLIENT-CLIENT
222
000
000
000
No.       3 Ty.          FORM
Name CALL_IMP_METHODS
PV_TRKORR
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
PV_NO_WORK_FOUND
2
0
0
0
PT_CLIENT
Table IT_21[1x8]
PROGRAM=RDDEXECUDATA=GT_CLIENT
Table reference: 16
TABH+ 0(20) = B0311757FE070000000000000000000000000000
TABH+ 20(20) = 10000000150000000100000008000000FFFFFFFF
TABH+ 40(16) = 040000009008000010000000C1248001
store        = 0xB0311757FE070000
ext1         = 0x0000000000000000
shmId        = 0     (0x00000000)
id           = 16    (0x10000000)
label        = 21    (0x15000000)
fill         = 1     (0x01000000)
leng         = 8     (0x08000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000031
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x10311757FE070000
pgHook       = 0x0000000000000000
idxPtr       = 0x0000000000000000
shmTabhSet   = 0x0000000000000000
id           = 20    (0x14000000)
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
shmVersId    = 0     (0x00000000)
shmRefCount = 1     (0x01000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
collHook     = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
LS_CLIENT_H
2222
0000
0000
0000
TTRA
T
5
4
0
0
SY
######################################f#######################################T######### ####
0000000000000000000000000000000000000060000000000000000000000000000000000000105000000080220000
0000104000000000000010201000100000000060000000000000000000000000000000000000604000000000000300
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000070000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
PV_UPDATE_LOCKFLAG
X
5
8
0
0
PV_CTC
2
0
0
0
PV_STATLOG_FILE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_METHOD_CALL
AFTER_IMP SICF_AFTER_IMPORT              ###Á#>#À#?###@#
44545544525444544545544545522222222222222000C030C0309040
16452F9D003936F16452F9D0F240000000000000000010E000F0F000
00000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000
PV_IS_UPGRADE
2
0
0
0
PV_TOP_LEVEL
2
3
2
0
0
PS_SPEC_PARS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_METHOD_CALL-CLIDEP
2
0
0
0
PS_SPEC_PARS-WITH_CL_RESULTS
2
0
0
0
%_VIASELSCR
0
4
No.       2 Ty.          FUNCTION
Name TRINT_CALL_AFTER_IMP_METHOD
IS_E070
SAPKB70012          DRSAP       SYSTSAPUSER     20080116185743
5454433333222222222245545222222255555455545222223333333333333322222222222222222222
310B270012000000000042310000000039343105352000002008011618574300000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
IT_E071
Table IT_15[23207x360]
PROGRAM=RDDEXECUDATA=E071_TAB[]
Table reference: 10
TABH+ 0(20) = C0841857FE070000B0611757FE07000000000000
TABH+ 20(20) = 0A0000000F000000A75A000068010000FFFFFFFF
TABH+ 40(16) = 04000000C005000010000000C1248001
store        = 0xC0841857FE070000
ext1         = 0xB0611757FE070000
shmId        = 0     (0x00000000)
id           = 10    (0x0A000000)
label        = 15    (0x0F000000)
fill         = 23207 (0xA75A0000)
leng         = 360   (0x68010000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000016
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x206E1857FE070000
pgHook       = 0x30047F57FE070000
idxPtr       = 0x0000000000000000
shmTabhSet   = 0x0000000000000000
id           = 14    (0x0E000000)
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 32752 (0xF07F0000)
lineAlloc    = 23216 (0xB05A0000)
shmVersId    = 0     (0x00000000)
shmRefCount = 1     (0x01000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x0000000000000000
collHook     = 0x0000000000000000
ext2         = 0x40611757FE070000
>>>>> 2nd level extension part <<<<<
tabhBack     = 0xD0C31F57FE070000
delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x0000000000000000
pb_handle    = 0x0000000000000000
IT_E071K
Table IT_16[6045x564]
PROGRAM=RDDEXECUDATA=E071K_TAB[]
Table reference: 11
TABH+ 0(20) = 20851857FE070000F0611757FE07000000000000
TABH+ 20(20) = 0B000000100000009D17000034020000FFFFFFFF
TABH+ 40(16) = 040000005006000010000000C1248001
store        = 0x20851857FE070000
ext1         = 0xF0611757FE070000
shmId        = 0     (0x00000000)
id           = 11    (0x0B000000)
label        = 16    (0x10000000)
fill         = 6045 (0x9D170000)
leng         = 564   (0x34020000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000019
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x00C49357FE070000
pgHook       = 0x60E75357FE070000
idxPtr       = 0x0000000000000000
shmTabhSet   = 0x0000000000000000
id           = 15    (0x0F000000)
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 8192 (0x00200000)
lineAlloc    = 6048 (0xA0170000)
shmVersId    = 0     (0x00000000)
shmRefCount = 1     (0x01000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x0000000000000000
collHook     = 0x0000000000000000
ext2         = 0xE06F1757FE070000
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x806F1757FE070000
delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x0000000000000000
pb_handle    = 0x0000000000000000
IV_CTC
2
0
0
0
IV_DATNAME
:D:T:S:data:F:IB70012.SAP
3435353667634344333332545222222222222222222222222222222222222222222222222222222222222222222222
A4A4A3A4141A6A9270012E310000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IV_SFW_CALL
2
0
0
0
IV_STATLOG_FILE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IV_TRKORR
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
IV_UPDATE_LOCKFLAG
X
5
8
0
0
IT_CLIENT
Table IT_21[1x8]
LS_SPEC_PARS-NOT_DURING_UPGRADE
2
0
0
0
ALLSTAT
RNODL
54444222222222222222222222
2EF4C000000000000000000000
00000000000000000000000000
00000000000000000000000000
LV_UPGRADE_IS_RUNNING
2
0
0
0
TMVD
E
4
5
0
0
RSJOBINFO
00000000000000                                  ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
<LS_METHOD_CALL>
AFTER_IMP SICF_AFTER_IMPORT              ###Á#>#À#?###@#
44545544525444544545544545522222222222222000C030C0309040
16452F9D003936F16452F9D0F240000000000000000010E000F0F000
00000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000
LV_IS_UPGRADE
2
0
0
0
LV_TOP_LEVEL
2
3
2
0
0
LV_NO_WORK_FOUND
2
0
0
0
LS_SPEC_PARS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
0
0
No.       1 Ty.          EVENT
Name START-OF-SELECTION
SCREEN
%_17NNS0000691660_%_%_%_%_%_%_
2533445333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F17EE30000691660F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST
######################################f#######################################T######### ####
0000000000000000000000000000000000000060000000000000000000000000000000000000105000000080220000
0000104000000000000010201000100000000060000000000000000000000000000000000000604000000000000300
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000070000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
GT_CLIENT
Table IT_21[1x8]
GS_CLIENT
2222
0000
0000
0000
DATNAME
:D:T:S:data:F:IB70012.SAP
3435353667634344333332545222222222222222222222222222222222222222222222222222222222222222222222
A4A4A3A4141A6A9270012E310000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DATNAME_%_APP_%
Data File Name (from TRBAT)
467624666246662267662554452222
4141069C50E1D50862FD0422149000
000000000000000000000000000000
000000000000000000000000000000
E071_TAB[]
Table IT_15[23207x360]
E071K_TAB[]
Table IT_16[6045x564]
SY-SUBRC
0
0000
0000
GV_CTC
2
0
0
0
GV_TRBAT_DATNAME
:D:T:S:data:F:IB70012.SAP
3435353667634344333332545222222222222222222222222222222222222222222222222222222222222222222222
A4A4A3A4141A6A9270012E310000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
<%_TABLE_E071>
<%_TABLE_E071K>
GV_STATLOG_FILE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
COMFILE
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
SY-LANGU
E
4
5
0
0
SY
######################################f#######################################T######### ####
0000000000000000000000000000000000000060000000000000000000000000000000000000105000000080220000
0000104000000000000010201000100000000060000000000000000000000000000000000000604000000000000300
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000070000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
SPACE
2
0
0
0
Internal notes
The termination was triggered in function "ab_genprog"
of the SAP kernel, in line 1476 of the module
"//bas/700_REL/src/krn/runt/abgen.c#5".
The internal operation just processed is "FUNC".

Good Morning
Did you ever get this working without restoring ?
Kind Regards
Marius

Extract error for an Infoset Query based Datasource

Hello All,
When I test a Info set Query Extraction in RSA3, I am facing the error message:
The field 'ZBW_EXTRACT' is unknown, but there are following fields with similar name '%COUNT-ZBW_EXTRACT'.
Syntax Error in Program 'AQZZSYSTBWGENER.....'
The Program is an Internal system generated program.
Has anyone faced the issue and know the way out..?
Definitely, will award points..
Thanks in advance,
Ameya.

Hi Ameya,
which system are you testing this? I mean are you testing this in dev or qa? If you are testing in QA, make sure you import the infoset correctly. It is a different procedure. Hope it helps.
Thanks and Regards
Subray Hegde

System error in program SAPLRRSV & Form RRSV_CHAVL_TO_VALUE_CONVERT

Hi,
While running a Bw Report I'm getting the following error:
System error in program SAPLRRSV & Form RRSV_CHAVL_TO_VALUE_CONVERT
When checking the report found that one of the Characteristic of the report is in incorrect Internal format. As a result it shows inconsistency when checking the values of the charactersitic for conversion exit.
Tried correctin this error by doing a correct error but it didnt work.
When checked the SID table the characteristics had some invalid records which are not maintained in the Master Data table.
How to correct this error?
-Thanks
Sree

Hi Sree,
We're having the same problem. I'd like to know how to solve it. Could you please tell me how to do it?
Thanks.
Best regards,
Julian.

System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-

Hi Experts,
We found an error ABAP/P Processor: Message_type_x and Error analysis shows "System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-"
I found a forum that close to my issue: ABAP Dump Error - System error in program RSMDATASTATE
Also, I checked the SAP Note : 858671 and 1094948.
As for my BW system, the system component information is SAP Netweaver BI 7.0 Release 700 Level 0019. Does it mean the both sapnotes alreay apply to my sap system?
Could anyone please advices me in this issue? I am so newbie in SAP BW. I'm so apology if they already have a forum or a note that related to my issue.
Thank you everyone for further assistances
With Best Regards,
Molly

Hi Molly ,
A per my experience and and observation. Message_type_x issue will occur in two scenarios.
1) When ever Sytesm copy happend.
2) Triggering of info package twice at a same time.
Case1:
When ever system copy happens, we will have init request still pointing to the Previous targer syatem's in Init.
Thsi can be resolved by reinitilization of source request.
Note: Make sure that Init reqiuest is same in both Source and Target systems.
Case 2:
Message_type_x May occur by triggering the info package at a same time twice(some time we also get xx request is inprocess alert).
With respect to the following blog:
Kindly check the request in RSMDATASTATE.
1) Request SID for which all requests are technically o.k.
2) Request SID for which all requests checked for quality.
3) Request SID, up to which aggregates are to be rolled up.
Best Regards,
Maruthi

FRF-00025 Unable to call function. Error message: Syntax error in program

hi,
when we try to import the export file,we are getting the following error in the 24th phase
i.e., check DDIC Password.
The Error is
INFO       2007-10-29 15:53:20 [iaxxrfcimp.cpp:1017]
           CAbRfcImpl::callLibraryFunction
Generating interface for remote function.
TRACE      [iaxxrfcimp.cpp:1056]
           CAbRfcImpl::performFunctionCall
Calling function module: INST_RFC_GET_INTERFACE
WARNING[E] 2007-10-29 15:53:21 [iaxxrfcimp.cpp:1089]
           CAbRfcImpl::performFunctionCall
FRF-00025 Unable to call function. Error message: Syntax error in program SAPLSUNI                                . .
TRACE      [iaxxrfcimp.cpp:1090]
           CAbRfcImpl::performFunctionCall
RFC failure or system exception raised
TRACE      [iaxxrfcimp.cpp:1091]
           CAbRfcImpl::performFunctionCall
Syntax error in program SAPLSUNI                                .
TRACE      [iaxxbjsmod.cpp:657]
           CJSlibModule::showOkCancelBox_impl()
<html>Test logon to SAP System I50 failed.<p>Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.</html>
TRACE      [iaxxgenimp.cpp:1093]
           showDialog()
waiting for an answer from gui
What Could be the solution for this.
waiting for ur reply
SS

Hi Friend,
Please check whether or not there is view missing error recorded in dev_w0 trace file.
if there is , you can try to follow this procedure in order to manually
import the missing view definitions.
All steps must be carried out with the <sid>adm user of the target
system and from the install-directory:
1. In the install-directory
<sapinst_instdir>\...COPY\IMPORTT\SYSTEM\ABAP\ORA\UC\DB
create a file SAPVIEW.cmd with the following content:
tsk: "<sapinst_instdir>\...\COPY\IMPORT\SYSTEM\ABAP\ORA\UC\DB\SAPVIEW.TSK"
icf: "
<YOUR_EXPORT_DIRECTORY>\export\DATA\SAPVIEW.STR"
dcf: "<sapinst_instdir>\...\COPY\IMPORT\SYSTEM\ABAP\ORA\UC\DB\DDLORA.TPL"
dat: null
dir: null
ext: null
Please make sure that all paths are written correctly (in one line) and
the refered files are existant and readable. One exception:
The SAPVIEW.TSK file is created with step 2.:
2. Run from the command-line:
R3load -ctf I
<YOUR_EXPORT_DIRECTORY>\export\DATA\SAPVIEW.STR <sapinst_instdir>\...\COPY\IMPORT\SYSTEM\ABAP\ORA\UC\DB\DDLORA.TPL SAPVIEW.TSK ORA -l SAPVIEW.log
If there's a problem reading the 'SAPVIEW.STR' file, copy the
file to the install directory and adapt the path accordingly.
3. Run the view import by:
R3load.exe -i SAPVIEW.cmd -dbcodepage <YOUR_CODE_PAGE> -l SAPVIEW.log
-stop_on_error
4. Check both the SAPVIEW.log and the SAPVIEW.TSK file whether all views
have been created successfully.
If 4. is okay, restart the central instance and check whether you are
able to log on now. If yes, continue 'sapinst' by the option 'retry' or
'continue old installation'.
I Hope It can be helpful.
With Best Regards
Julia

Internal error in program SAPLRSDRS and method WRITE_DDIC_INFO-6-?

Hi All,
When i load data from self system to the targets i got an error message "Internal error in program SAPLRSDRS and method WRITE_DDIC_INFO-6-"...
could any body help me to resolve this type of issues.
Thanks in advance.
Thanks,
Vachan

No this is not a short dump message...these error message i am seeing the error message in the monitor...in the detail tab extraction 'Error occurred in the data selection " and then there is no trfcs and idocs processing and even processing also not happened.
thanks ,
Vachan

Run time error for program /MRSS/SAPLRSG_PM_ORDER

Hi All,
When I am confirming the service order through transaction code IW41, I am getting a run time error which says " Error in Program /MRSS/SAPLRSG_PM_ORDER". In this client MRS is active.
Some details of Runtime error is as follows.
Trigger Location of Runtime Error
    Program                                 /MRSS/SAPLRSG_PM_ORDER
    Include                                 /MRSS/LRSG_PM_ORDERU03
    Row                                     1.224
    Module type                             (FUNCTION)
    Module Name                             /MRSS/RSG_PM_ORDER_PUSH_TO_MRS
Source Code Extract
Line SourceCde
1194
1195     CLEAR: lv_failed, lt_messages.
1196
1197     lt_assignment_rfc[] = lt_assignment[].
1198     CALL FUNCTION '/MRSS/RSG_MAINTAIN_MRS'
1199       EXPORTING
1200         it_dem_h          = lt_dem_h
1201         it_adm            = lt_adm
1202         it_plr            = lt_plr
1203         it_plrs           = lt_plrs
1204         it_info           = lt_info
1205         it_tool           = lt_tool
1206         it_relat          = lt_rel_dem
1207         it_qualif         = lt_qualif_dem
1208         it_assignment     = lt_assignment_rfc
1209 *        iv_no_save        = no_save
1210         iv_no_save        = true
1211         iv_no_commit      = no_commit
1212         it_status         = lt_status_abst
1213         it_partner        = lt_partner_ext
1214         it_address        = lt_address
1215         it_operations     = lt_opera_activity
1216         iv_no_authority_check = lv_no_authority_check
1217         it_split_upd_number = lt_split_upd_number
1218       IMPORTING
1219         et_demands        = lt_demand_mrs
1220         ev_failed         = lv_failed
1221         et_messages       = lt_messages.
1222
1223     IF lv_failed = true.
>>>>>       MESSAGE x000(/mrss/sge).
1225     ENDIF.
1226

Hi,
Can you try with T-code /n/MRSS/WFM_HR.
Make sure to open only one SAP session to run this.
Ask yor basis admin to look in to error details ,related SM21 logs,cancel jobs, Job logs and report analysis.
Regards
Nagaraju

System error in program CL_RSDM_READ_MASTER_DATA and form

Hi Xpertz
I had a workbook created on a multiprovider. There was a navigation attribute removed from a infoobject for(which was not mapped in my multiprovider)
I am getting this error when i try to run the workbook.
"System error in program CL_RSDM_READ_MASTER_DATA and form
sidvaldirect_read2"
I tried running rsrv and found that there was a hierarchy field which is giving error.
It stated that no leaf properly maintained.
I tried correcting it but it didnt work.
But I went to my query and removed a field(not hierarchy but another characterstic in the query) and it works fine.
I am not restricitng anything key figure with this characterstics..
So how to go about this...........
Thanks in advance
Regards
R M K

Hi Ravi
I checked that the hierarchy and the characterstics both are different and heirarchy is not using the characterstic. Could you tell me what causes this error? If it is because of SID's then how to handle that. Awaiting your reply.

BRAIN299 System error in program CL_RSR and form _CHACONST_SID-02

I am getting the following error when trying to update and activate my multi providers.
BRAIN299 System error in program CL_RSR and form CHACONSTSID-02
Info cubes syntax check is fine.

Hi,
try to implement this SAP note:
InfoObjects: Unintentional characteristic constant
SAP Note Number: [1080800|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303830383030%7d]
Symptom
In the maintenance transaction for InfoObjects, the system displays no value in the 'Constant' field. However, you use the InfoObject, for example in a query, and the system behaves as if a value were set. This may cause unexpected behavior or errors.
Other terms
InfoObjects, characteristic, characteristic constant, CHACONST, CL_RSR _CHACONST-SID-02-, EXCRT
Regards
Andreas

DTP error: "System error in program CL_RSR and form GET_COB_PRO-01-"

Hi Gurs,
When I am lasting data in Production, from DSO to a Cube with DTP I get error
In Extract from DataStore u201CSystem error in program CL_RSR and form GET_COB_PRO-01-u201C.
The DSO is loaded from 0FI_GL_10. I do not get this problem in Development
We have BW 7.3 SP05
Any ideas?
Regards, Reynir

Hi,
Check the below note :
Note 1550723 - System error in program CL_RSR and form GET_COB_PRO-01-
Also check in SM21/ST22 for any message number along with the error.
Regards,
Sunil

System error in program cl_rsr and form _chaconst_sid-02-

Hi,
last week we upgraded our BW from 3.1 to 7.0 (SP15). Since them we have problems with a query.
If I execute a querydefinition in BEX, the message "system error in program cl_rsr and form chaconstsid-02-" pops up.
Please let us know what can be the problem and the solution.
Thanks in advance and best regards.
Detlef

Hi,
try to implement this SAP note:
InfoObjects: Unintentional characteristic constant
SAP Note Number: [1080800|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303830383030%7d]
Symptom
In the maintenance transaction for InfoObjects, the system displays no value in the 'Constant' field. However, you use the InfoObject, for example in a query, and the system behaves as if a value were set. This may cause unexpected behavior or errors.
Other terms
InfoObjects, characteristic, characteristic constant, CHACONST, CL_RSR _CHACONST-SID-02-, EXCRT
Regards
Andreas

Extraction Error - 0EC_PCA_3 - Program on R/3 side missing

Similar Messages

Maybe you are looking for