Extraction failed and gives short dump

error messege while extracting data source 0plant_attr in RSA4
the following syntax error occured in program SAPLMDEX in include LMDEZ$01
BIW_KNA1_S must be a flat structure ,you cannot use internal tables,srtings ,refferences or structures

Hi
This might occurred due to incorrect declaration of temp. variables. Please go through the shortdump. There is a point in the shortdump where a pointer points at the line of error.
Also parallely check for user exit code written in CMOD tcode. Check the component EXIT_SAPLRSAP_001 and search for the datasource. You will find your code.
Regards
Murthy Gunuputi

Similar Messages

REUSE_ALV_LIST_DISPLAY give short dump beyond 100 columns

Hi,
I have more than 170 columns in my internal table and this gives short dump when it reached 100the column because the structure RS_HEADER which displays column header can only hold 99 columns.
Is there anyway I still use REUSE_ALV_LIST_DISPLAY and overcome the short dump issue.
Regards
Kasi

Although I have not encountered such a case, I would suggest the following: After 99 field, modify the field catalog by setting the excess fields as no_out = abap_true (provided TYPE-POOLS: abap is declared) Then, the user should be limited to a certain number of fields and if he/she wants more fields to be displayed, then he/she should change the layout. I hope that works.

Infopackage in process chain failing due to short dump on regular basis.

HI Experts,
There is a daily process chain in which one of the element (infopackage) fails due to short dump on regular basis (At least twice in a week) please find the message below
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
And in job log it is showing ARFCSTATE = SYSFAIL
We are able to resolve it just manual update and the process goes fine no issues but my question here is what is the exact reason for this and how to resolve it permanently or decrease the frequency of the error.
Please if any one can tell the root cause and the solution to avoid the issue in future on regular basis.
and also can any one elaborate what is ARFCSTATE = SYSFAIL,for trfc check we don't have access to SM58 in ECC side
and trfc is fine in bw side
Appreciate for not giving the general solutions like repeated solutions already posted in SDN
with regards,
musai

You can contact your BASIS person he can help you reg table space issue. it says used space is 98% and free space is 1.03%.
ask your basis to set a threshold to check the space and send a mail notification to all daily regarding the space allocation and utilization.
ARFCSTATE = SYSFAIL means the TRFC did not processed properly to the BW system from source.
Monitoring object with information about tRFC and qRFC calls that are waiting to be executed in this system; after they have been executed, they are deleted from table ARFCRSTATE.
Are there any hung TRFCs which are not processed to BW side. have you checked it
first check
load monitor -- menu -- environment -- job overview -- status of job(is it finsihed or not?) - check the job log -- ther try to find out the hung TRFc
press find --tyep "sysfail" ok -- it will display all the hung or fialed TRFCs which are not processed to BW system.
if you find the hung TID with respect to your load.. next goto SM58 trasaction to process the trfcs manually or use the load monitor menu -- environment -- transaction RFC -- source sys -- it will take you to same SM58 screen -- click F8 it will display the hung TRFc in that duration.
select the TRFc and click on F6 to process them manually.
also check the loackwaits anddead locks in ST04/DB6COCKPIT.( ask basis to check) if any dead locks are there they will take care of it.
check for short dumps in st22 if any and try to analyse.
Check the SM21 system logs.

For me, I hit the restore process, get a spot on apple's servers, ites through the restore, and at the very end it fails and gives me error 3004

I hit the restore process, get a spot on apple's servers, it goes through the restore, and at the very end it fails and gives me error 3004 :|

Jdda wrote:
... error 3004 :|
See here for your Error message > http://support.apple.com/kb/TS3694

Jobs are failing and give dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"

Hi ,
Jobs are failing and giving dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY " and TSV_TNEW_PAGE_ALLOC_FAILED.
Here are the logs:
===================================================================
15.04.2009 07:11:35 Job started                                                                                00           516          S
15.04.2009 07:11:35 Step 001 started (program ZAPO_REALIGNMENT_MPOS_PA, variant AP_AP_REALG_S1, user ID aaa_bbb_apo)      00           550          S
15.04.2009 07:12:52 ABAP/4 processor: TSV_TNEW_BLOCKS_NO_ROLL_MEMORY                                                      00           671          A
15.04.2009 07:12:52 Job cancelled                                                                                00           518          A
===================================================================
Job log overview for job:    BIREQU_4DHSSKZ38YF3KALR4ZBRCDNQT / 00382400
Date       Time     Message text                                                                     Message class Message no. Message type
15.04.2009 00:38:24 Job started                                                                           00           516          S
15.04.2009 00:38:24 Step 001 started (program SBIE0001, variant &0000000024435, user ID aaa_bbb_APO)      00           550          S
15.04.2009 00:38:24 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)              R3           413          S
15.04.2009 00:38:24 DATASOURCE = 9AZAP_AM                                                                 R3           299          S
15.04.2009 00:38:24 *************************************************************************             R8           048          S
15.04.2009 00:38:24 *          Current Values for Selected Profile Parameters               *             R8           049          S
15.04.2009 00:38:24 *************************************************************************             R8           048          S
15.04.2009 00:38:24 * abap/heap_area_nondia......... 2000683008                              *            R8           050          S
15.04.2009 00:38:24 * abap/heap_area_total.......... 2000683008                              *            R8           050          S
15.04.2009 00:38:24 * abap/heaplimit................ 100894464                               *            R8           050          S
15.04.2009 00:38:24 * zcsa/installed_languages...... ED                                      *            R8           050          S
15.04.2009 00:38:24 * zcsa/system_language.......... E                                       *            R8           050          S
15.04.2009 00:38:24 * ztta/max_memreq_MB............ 256                                     *            R8           050          S
15.04.2009 00:38:24 * ztta/roll_area................ 100000000                               *            R8           050          S
15.04.2009 00:38:24 * ztta/roll_extension........... 8000683008                              *            R8           050          S
15.04.2009 00:38:24 *************************************************************************             R8           048          S
15.04.2009 00:38:54 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED                                          00           671          A
15.04.2009 00:38:54 Job cancelled                                                                         00           518          A
=================================================================
Please suggest

Hi,
Here are the details as follows:
ORACLE
10.2.0.2.0
=====
HP-UX
9000/800
====
Kernel release    700
Compilation       HP-UX B.11
Sup.Pkg lvl.      108
ABAP Load         1563
CUA load          29
=============
SCM 5.00
SAP_BASIS     700     0011     SAPKB70011
SAP_ABA     700     0011     SAPKA70011
ST-PI     2005_1_700     0003     SAPKITLQI3
PI_BASIS     2005_1_700     0011     SAPKIPYJ7B
SAP_BW     700     0012     SAPKW70012
LCAPPS     2005_700     0004     SAPKIBHD04
SAP_AP     700     0008     SAPKNA7008
EA-IPPE     400     0007     SAPKGPID07
SCM     500     0008     SAPKY50008
SCM_BASIS     500     0008     SAPK-50008INSCMBASIS
QIE     200     0004     SAPK-20004INQIE
BI_CONT     703     0005     SAPKIBIIP5
ST-A/PI     01I_SCM500     0000          -
VIRSANH     530_700     0005     SAPK-53305INVIRSANH
========================
Thanks,
VK

Load getting failed due to short dump

Hi All,
Process Chain is getting failed due to following short dump Include Report LFZI_CA_PCA_DERIVATIONSU37 not found. Please suggest on rectifying this dump. Its a delta load.
Regards,
Asim

Hi All
As requested please find details short dump below. And datasource name is this GECPC_GLPCP and its extractor is ZPCC_V_GLPCP.
Short text
   Syntax error in program "SAPLZFI_CA_PCA_DERIVATIONS ".
hat happened?
   Error in the ABAP Application Program
   The current ABAP program "GP9IQHCDEPFH201E24O25IAYXXW" had to be terminated
    because it has
   come across a statement that unfortunately cannot be executed.
   The following syntax error occurred in program "SAPLZFI_CA_PCA_DERIVATIONS " in
    include "LZFI_CA_PCA_DERIVATIONSUXX " in
   line 77:
   "INCLUDE report "LZFI_CA_PCA_DERIVATIONSU37" not found"
   The include has been created and last changed by:
   Created by: "SAP* "
   Last changed by: "SAP* "
   Error in the ABAP Application Program
   The current ABAP program "GP9IQHCDEPFH201E24O25IAYXXW" had to be terminated
    because it has
   come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "SAPLZFI_CA
    You can also perform the syntax check from the ABAP Edito
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can lo
    at and manage termination messages, and you can also
   keep them for a long time.
Error analysis
    The following syntax error was
    "INCLUDE report "LZFI_CA_PCA_DE
How to correct the error
    Probably the only way to elimin
    If you cannot solve the problem
    notification to SAP, include th
    1. The description of the curre
       To save the description, cho
    (Unconverted)".
    2. Corresponding system log
Display the system log by callin
Restrict the time interval to 10
ter the short dump. Then choose "
nconverted)".
If the problem occurs in a probl
ogram: The source code of the pro
In the editor, choose "Utilities
ilities->Upload/Download->Downloa
Details about the conditions und
tions and input led to the error.
Information on where terminated
    Termination occurred in the ABAP program "GP9IQHCDEPFH201E24O25IAYXXW" - in
     "START_ROUTINE".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 102
    of the (Include) program "ZFICA_DERIVE_PCA_OBJECTS_S".
    The program "GP9IQHCDEPFH201E24O25IAYXXW" was started as a background job.
    Job Name....... "BIDTPR_6726959_1"
    Job Initiator.. "ALEREMOTE"
    Job Number..... 17271800
Line SourceCde
   72 ASSIGN 'L_DERIVE_CHRT_ACCTS-UPD_CHRT_AC
   73 assign (<derive_chrt_accts_field>) to
   74 IF <derive_chrt_accts> IS ASSIGNED.
   75   zzi_attributes_upd-chrt_accts_upd = '
   76 ENDIF.
   77 zzi_attributes_upd-/bic/gactivity_upd
   78 zzi_attributes_upd-/bic/gfactv_upd
   79 zzi_attributes_upd-/bic/gglobacct_upd
   80 zzi_attributes_upd-/bic/ggforacc_upd
   81 zzi_attributes_upd-/bic/ggrracc_upd
   82 zzi_attributes_upd-/bic/ggra_code_upd
   83 zzi_attributes_upd-/bic/gsegmtion_upd
   84 zzi_attributes_upd-/bic/ggaapflg_upd
   85 zzi_attributes_upd-/bic/gsub_item_upd
   86 zzi_attributes_upd-/bic/gsegmnt_upd
   87 zzi_attributes_upd-/bic/gacctgrp_upd
   88 zzi_attributes_upd-comp_code_details_up
   89 zzi_attributes_upd-gbfi0600_upd
   90 zzi_attributes_upd-/bic/zaccsuf_upd
   91 zzi_attributes_upd-/bic/gconunit_upd
   92 zzi_attributes_upd-/bic/gtpunit_upd
   93 *--------------------------------------
   94 * Store a copy of the source fields if
   95 *--------------------------------------
   96 MOVE-CORRESPONDING <source_fields> TO z
   97 CLEAR zze_attributes.
Runtime Errors         SYNTAX_ERROR
Date and Time          04.08.2014 17:27:39
    98 *----------------------------------------------------------------------*
    99 * Derive all PCA fields for reporting
   100 *----------------------------------------------------------------------*
   101
>>>>> CALL FUNCTION 'ZFI_CA_DERIVE_PCA_ATTRIBUTESII'
   103   EXPORTING
   104     i_zfi_ca_pca_attributes     = zzi_attributes
   105     i_zfi_ca_pca_attributes_upd = zzi_attributes_upd
   106     msgty                       = 'I'
   107     recno                       = <source_fields>-record
   108   IMPORTING
   109     e_zfi_ca_pca_attributes     = zze_attributes
   110   TABLES
   111     monitor_recno               = lt_monitor_recno.
   112
   113 *----------------------------------------------------------------------*
   114 * On the recurrsive load delete entries where the data is the same
   115 *----------------------------------------------------------------------*
   116 IF zzg_realignment_run = 'X'.
   117   IF zzi_attributes = zze_attributes.
   118     DELETE source_package INDEX la_tabix.
   119   ELSE.
   120     MOVE-CORRESPONDING zze_attributes TO <source_fields>.
   121   ENDIF.
SY-SUBRC 0
SY-INDEX 3
SY-TABIX 1
SY-DBCNT 10
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Proces
SY-MSGTY E
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 ZBAL_LC
SY-MSGV2 A
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20140804
SY-UZEIT 172720
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
No.   Ty.          Program                             Include                             Line
      Name
    8 FUNCTION     GP9IQHCDEPFH201E24O25IAYXXW         ZFICA_DERIVE_PCA_OBJECTS_S            102
      START_ROUTINE
    7 METHOD       GP9IQHCDEPFH201E24O25IAYXXW         ZFICA_DERIVE_PCA_OBJECTS_S            102
      LCL_TRANSFORM=>START_ROUTINE
    6 METHOD       GP9IQHCDEPFH201E24O25IAYXXW         GP9IQHCDEPFH201E24O25IAYXXW          1299
      LCL_TRANSFORM=>EXECUTE
    5 METHOD       CL_RSTRAN_TRFN_CMD============CP    CL_RSTRAN_TRFN_CMD============CM005    70
      CL_RSTRAN_TRFN_CMD=>IF_RSBK_CMD_T~TRANSFORM
    4 METHOD       CL_RSBK_PROCESS===============CP    CL_RSBK_PROCESS===============CM00Q    93
      CL_RSBK_PROCESS=>PROCESS_REQUEST
   3 METHOD       CL_RSBK_PROCESS===============CP    CL_RSBK_PROCESS===============CM002    13
      CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~EXECUTE
    2 FUNCTION     SAPLRSBATCH                         LRSBATCHU13                           437
      RSBATCH_EXECUTE_PROCESS
    1 EVENT        RSBATCH_EXECUTE_PROZESS             RSBATCH_EXECUTE_PROZESS               374
      START-OF-SELECTION
REQUEST
    DTPR_1FR9TKO2U6M616ATG9C2EYKRH
    455553453544353433345434345454
    4402F16294BF256D61614793259B28
    000000000000000000000000000000
    000000000000000000000000000000
DATAPACKID
    000001
    333333
    000001
    000000
    000000
MONITOR
    Table[initial]
SOURCE_PACKAGE
    3000000001012P2013K4AU0ACD 2013005          00                                               0
    3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
    300000000101202013B415013402013001000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
    300000000101202013B415013402013002000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
    300000000101202013B415013402013003000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    3333333333333533334345344423333333222222222233222222222222222222222222222222222222222222222223
    300000000101202013B415013402013004000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000
00000000000000000000000000000000000
33333333333335333343453444233333332
300000000101202013B4150134020130050
00000000000000000000000000000000000
00000000000000000000000000000000000
Table IT_110723[600000x1144]
{A:114*\TYPE=%_T00003S00000115O0000
Table reference: 3570
TABH+ 0(20) = 90A161080000000060C1
TABH+ 20(20) = F20D000083B00100C027
TABH+ 40(16) = 03730000242D00000400
store        = 0x90A1610800000000
ext1         = 0x60C1190C00000000
shmId        = 0     (0x00000000)
id           = 3570 (0xF20D0000)
label        = 110723 (0x83B00100)
fill         = 600000 (0xC0270900)
leng         = 1144 (0x78040000)
loop         = 128   (0x80000000)
xtyp         = ROL.115.11556
occu         = 4     (0x04000000)
accKind      = 1     (ItAccessStand
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniNo)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
stMode       = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
isUsed       = 1
isCtfyAble   = 1
hasScndKeys = 0
hasRowId     = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
----- Shareable Table Header Data -----
tabi         = 0xB008190C00000000
pgHook       = 0x404CE73B00000000
idxPtr       = 0x0000000000000000
id           = 61767 (0x47F10000)
shmTabhSet   = 0x0000000000000000
refCount     = 1     (0x01000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 606204 (0xFC3F0900)
lineAlloc    = 600004 (0xC4270900)
shmVersId    = 0     (0x00000000)
shmRefCount = 2     (0x02000000)
rowId        = 18446744073709551615
scndKeyAdmin = 0x0000000000000000
----- 1st level extension part --------
regHook      = 0xC8C0190C00000000
collHook     = 0x0000000000000000
ext2         = 0x0000000000000000
RI-CLUSTR
   0
   00
   00
ZE_ATTRIBUTES
                     00000
   22222222222222222233333
   00000000000000000000000
   00000000000000000000000
   00000000000000000000000
ZI_ATTRIBUTES
   AU0A    070221000020130
   45342222333333333333333
   15010000070221000020130
   00000000000000000000000
   00000000000000000000000
ZI_ATTRIBUTES_UPD
   XXXXX XXXXXX XX XXXX
   55555255555522552555522
   88888088888800880888800
   00000000000000000000000
   00000000000000000000000
SOURCE_FIELDS>-RECORD
   1
   0000
   1000
T_MONITOR_RECNO
   Table[initial]
ZG_REALIGNMENT_RUN
   2
Regards,
Asim
GECPC_GLPCP

Design Time for processes and forms : Short Dump

Hi All,
When I try to execute Design Time for processes and forms - (tcode :HRASR_DT), I am getting below short dump.
The following syntax error occurred in program
"CL_HRASR00_DT_FSCN_PD_DATA====CP " in include
"CL_HRASR00_DT_FSCN_PD_DATA====CM00E " in
line 177:
"The obligatory parameter "FORM_SCENARIO_VERSION" had no value assigned"
" to it."
Please suggest what could resolve this.
Thanks.
Tejas

note: Note 1075650
Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
regards,
Prakesh.

Data load failing with a short-dump

Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith Kibuuka

Did you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards

Argument type H!!!!! and thus short dumP!!!!!!!!!!!!!!!!!!!!!!

Friends...,
SELECT   bukrs
           kunnr
           gjahr
           belnr
           buzei
           blart
           wrbtr
           FROM bsid INTO TABLE i_temp_uandi WHERE
                                                   bukrs = fp_p_bukrs AND
                                                   kunnr IN fp_s_kunnr AND
                                                   bschl IN ('01',fp_s_bschl ) AND
                                                   blart IN (fp_p_blart,fp_p_blart1,fp_s_blart ) AND
                                                   rstgr IN fp_s_rstgr.
This is my required select statement.( Here   "fp_s" means its a select option and "fp_p" means its a parameter on my selection screen).
But i get a short dump at this statement saying arguments supplied in the where clause should be convertable to type C,but in this case it has encountered an argument of type H.
Pleasse help me out.
Its urgent.

I don't know why your WHERE clause is like this. You cannot use IN like this.
SELECT bukrs
       kunnr
       gjahr
       belnr
       buzei
       blart
       wrbtr
FROM bsid INTO TABLE i_temp_uandi
WHERE bukrs = fp_p_bukrs
   AND kunnr IN fp_s_kunnr
   AND ( bschl eq '01 or
         bschl IN fp_s_bschl )
   AND ( blart eq fp_p_blart or
         blart eq fp_p_blart1 or
         blart in fp_s_blart )
   AND rstgr IN fp_s_rstgr.

CCM - Publishing Master catalog gives short dump and terminates publishing

Hello Experts,
we are implementing SRM 5.0 with CCM 2.0 in SP08.
When we tried to publish the master catalog in CCM. we are getting the following error.
FYI..
i ran /CCM/initialize_cme once.
Checked TREX it is working fine. (checked with reports as well)
Your help will be greatly appreicated.
Thanks, Renga.
-========================================================-
Data type 4688C4C9FE4702CE00000000AC140239_ 0000000001 does not exist
Data type not found
Data type not found
Unable to initialize the characteristics/data types (catalog /CCM/MASTER_CATALOG)
Error when generating catalog /CCM/MASTER_CATALOG
Catalog update was terminated
Error when generating catalog /CCM/MASTER_CATALOG
Publication in target system was discarded
Exception /CCM/CX_PUBLICATION_FAILED occurred (program: /CCM/CL_PE_PACKAGING_SERVICE==CP, include: /CCM/CL_PE_PACKAGING_SERVICE=
Exception /CCM/CX_PUBLICATION_FAILED occurred (program: /CCM/CL_PE_REQUEST_SERVICE====CP, include: /CCM/CL_PE_REQUEST_SERVICE===
07/03/2007 13:45:01 (EST): Catalog publication was started
Publishing catalog /CCM/MASTER_CATALOG for the first time
Publication will only be local
Maximum package size (catalog items): 5000
07/03/2007 13:45:02 (EST): >>> Start: Publication of catalog model
07/03/2007 13:45:03 (EST): Data types published; 25 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): Characteristics published; 35 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): Schemas published; 1 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): Categories published; 313 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): >>> End: Publication of catalog model
07/03/2007 13:45:03 (EST): >>> Start: Publication of catalog content
07/03/2007 13:45:03 (EST) ************ Start Applications Log for Package 0001 *******************
07/03/2007 13:45:03 (EST): Package 0001 is being transferred to Update Manager
07/03/2007 13:45:03 (EST): Package 0001 is being updated locally
Catalog update was terminated
07/03/2007 13:45:05 (EST) ************* End Applications Log for Package 0001 ********************
07/03/2007 13:45:05 (EST): Package Nr. 0001 was sent
07/03/2007 13:45:01 (EST): system is waiting for response messages
07/03/2007 13:45:04 (EST): >>> Start: Processing of confirmation message for package 0001
Local update of package 0001 has failed
07/03/2007 13:45:04 (EST): >>> End: Processing of confirmation message for package 0001
07/03/2007 13:45:04 (EST): >>> Start: Processing of confirmation message for catalog
Local publication of catalog /CCM/MASTER_CATALOG has failed
07/03/2007 13:45:04 (EST): >>> End: Processing of confirmation message for catalog
07/03/2007 13:45:05 (EST): End of catalog publication
Total runtime of catalog publication: 00:00:04 ***
-========================================================-

Hi
<b>Please go through the SAP OSS Notes below -></b>
Note 866547 Error when accessing TREX server
Note 878316 - Missing standard characteristics in CCM2.0 catalogs
Note 910814 Lowercase letters in ID
Note 734168 - Error during initialization of characteristics & data types
Note 730047 CME-Customizing check
Note 937756 Runtime improvement when using view rules
Note 933796 Timeout while publishing using parallel processes
Note 904420 Tolerating inconsistencies in the view relationship
Do let me know.
Regards
- Atul

Update PSA job failed with the short dump

The process chain has failed at the UPDATE PSA step showing the internal session termination dump...In the dump it is showing the messages as :
"MESSAGE_TYPE_X" " "
"CL_RSSM_PSAPROCESS============CP" or "CL_RSSM_PSAPROCESS============CM007"
"IF_RSPC_EXECUTE~EXECUTE"
Could anyone tell me what may be cause for this kind of issue?
Regards,
Indira

Hello Indira,
OK, thanks for that information
The errors you have on your system can also be caused
by having too many entries in table RSPCINSTANCE
Please take a look at SAP note 1410071 and apply the latest
version of this note (with the advanced correction therein)
to your system, which should resolve the problem
Thanks in advance
Barry

BW HCM Extraction fails ands leaves lock entries that prevent payroll runs

Hello,
We have a process chain that, among other things, extracts from DS 0HR_PT_2. This process chain is being interrupted at this step and we are looking into it. What i don't get, is why the payroll people say they can't run payroll because a few employees are locked by user ALEREMOTE (our ERP bw user). Is there a configuration we can apply to the DataSource/InfoPackage to prevent this when an error occurs?
Thank you,
best regards,
Duarte

Hi,
we are experiencing the same issue.
We have several more problems, both 0HR_PT_2 and 0HR_PT_3 have terrible performance, delta is not working (or I cannot find out how) etc.
Did you have any success so far?
Thanks,
Petr

How to catch the error if an RFC fails due to short dump

Hi All,
I was calling the RFC Function module in parallel processing depends on the number of work processors available. I am getting the return message from the Function module using the perform statement
PERFORMING task_return ON END OF TASK
But I am not able to catch the errors if the RFC has been terminated due to the dump or manually killing the RFC while running.
I need how to handle the RFC if the call has been terminated due to the dump or system failure. Does the RFC return the sy-subrc at this time or can we able to catch the error in any other way.
Thanks & regards,
Vijay

Hello Vijay,
If you're calling RFC from outside SAP using the OCX-SAPFunctions-Library, then you can catch the dump or any other exception occuring in your SAP-Function.
Assuming that, objRFCFunc is the RFC-Function you can get the Excepetion-Code through objRFCFunc.Exception.
It returns a String. If the error was a dump, the String is "SYSTEM_FAILURE". If it is a "regular" Exception you'll get the Exceptioncode. E.g. "NO_DATA_FOUND".
If you need any sample code e.g. VBA-code for use in Office-Applications, let me know.
regards
Sven

On Prem Lync - Enable federation for "Lync Online" causes presence fail and gives error when creating groups

Hi all,
We have had Lync on premise for a long time, and have recently added Office 365 Business Premium Plan because we wanted Cloud exchange and SharePoint.
I have found that on our on prem Lync, when we enable federation for "Lync Online" it cause our presence to intermittently flick on and off, and we are unable to create groups in our Lync Client. We get the message "unable to create a group
at this time".
We are also not able to federate with Office365 hosted Lync Online clients.
This seems to be a bug between Office365 plans that have hosted lync licenses and on prem Lync. Has anyone found the
What I need to do is disable office365 Lync, and I have tried to do that in every location I can find (DNS/User settings), but I still have this issue.
Has anyone come across this issue and found a fix?
Simon.

Hi,
Did you do a Lync Hybrid environment or just make federation with Lync Online?
Please double check if there is any wrong configuration for federation with Lync online environment. You can refer to the following steps in the link below of “Configure federation support for a Lync Online domain in Lync Server 2013”:
http://technet.microsoft.com/en-us/library/hh202166.aspx
Then make sure CMS replication update to the latest status.
If the issue persists, check if Lync Server update the latest version. If not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Short dump 'DBIF_RSQL_SQL_ERROR' in R/3 system

Hi,
In the daily extraction process in BW a load process(infopackage) fails due to short dump "DBIF_RSQL_SQL_ERROR" in the source system(R/3) side.
The load getting the 20000 records but the process failed due to above error. i have made the request red and delete the request from the respective data target and repeate the load, it isthrowing same error "DBIF_RSQL_SQL_ERROR" with 0 records.
my question is if i solve the error and repeate the load can i get previous delta records with the latest delta.
Can any one give a solution.
Thanks

Hi,
If you are marking the dataload as "RED" in monitor before deleting the request, you will get the same delta with next load.
You can verify this in next load @ monitor. It will show you the request type as 'Repeat of last delta' and normal requests will be shown as 'Delta'.
In case you are manually running the infopackage, system will prompt the message something like' last detla request was incorrect, repeat the last delta'.
Regards,
Pratap Sone

Extraction failed and gives short dump

Similar Messages

Maybe you are looking for