For me, I hit the restore process, get a spot on apple's servers, ites through the restore, and at the very end it fails and gives me error 3004
I hit the restore process, get a spot on apple's servers, it goes through the restore, and at the very end it fails and gives me error 3004 :|
Jdda wrote:
... error 3004 :|
See here for your Error message > http://support.apple.com/kb/TS3694
Similar Messages
-
I upgraded my iphone4 wirelessly to iOS 5.1 and now I'm stuck in recovery mode and when I try and restore my phone it gives me error code (1) At this point,
I want a working phone. Any ideas?download a program called RecBoot, very easy to use, connect your iphone and click on "exit recovery mode" and it will restart normally. I had the same problem as you, but I solved it with this program.
-
Upgrade from Windows 8.1 to 10 fails with an error code, at the very end of processing
I tried to upgrade to Windows 10. It went through the whole process, and upon reboot at the very end it failed. It threw this message: I searched on these terms and couldn't find an answer. My machine is brand new. I haven't installed much on it at all, figuring it's better to wait until I've gotten Windows 10 installed. Any ideas?
So it looked like I was missing a KB update, the 3035584, which enables the upgrade. I performed some Windows 8.1 updates and got everything set up. I ran the upgrade to Windows 10. It went all the way through to the reboot, taking about 20~30 mins. At this point it asks me to confirm installation, and I select "OK" and it goes for another 20 mins. It proceeds about 10% of the way there, and then it reboots. The next thing I see on my screen is "Restoring your previous version of Windows". I'm back to Windows 8.1 again. I log in... and same error message as shown above. Frankly, I can't understand what is causing this... and why Windows can't "figure out" if my machine is good to go for a full installation in just 10 mins or so. Why go through all of these gyrations for 45 mins only to reject the whole process?
-
Yesterday I ran Disk Utility and came up with hundreds of permissions that needed repair. I hit the "repair permissions" button and waited until it said they were repaired, but just for fun I hit the "verify permissions" button again, and they all came back! I did this several more times and every time I would hit "verify permissions" I would get the same list. What's up? I've always suspected diagnostic programs, but this is Apple's own!
Ignore them. They aren't errors. You will keep seeing the same ones. As long as you get the message "Permissions repair complete," you're OK.
http://support.apple.com/kb/TS1448?viewlocale=en_US -
Tried to restore ipod and it gets stuck at the very end
please help! i plugged in my ipod to recovery mode to get all the apps off and it gets stuck at the very end of the restore. ive tried it more than five times now please help!!
Welcome to the discussions,
did you check your security software settings? http://support.apple.com/kb/TS3125 iTunes needs to connect to the Apple server during the restore process. -
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?
Instructions to get the phone back working temporary.. till there is a real fix.
1. turn off the phone
2. fire up iTunes
3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
5. iTunes will then ask you to choose which previous backup to would like to recover.
(note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1) -
Why wont my phone update to the 5.0? I get an error message at the very end of the updating process.
When I go to update my IPhone to the 5.0, it updates until the very end until I get a pop up message saying, "The Network connection timed out". How can I prevent this from happening or what else can I do to update my phone?
Try disabling both your firewall and antivirus software, then do the update again.
-
Headphone jack (the very end) is stuck in my iphone 4 and i cant get it out. How much would it cost to get it out?:/
i have tried to restore via itunes as i would have usually, half way through i get an error code 3194 pop up.....and yes i do back up.
Thanks for your help but i've already tried this a couple of times. -
I have tried many times to restore my ipad to factory settings with no luck. It does not get through the whole process and gives an error code of 3194 cannot restore. It then directs me to a website that does not help and is very hard to get rid of. I am ready to send my ipad back and get a new one. Is there any solution to saving my current model?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
My backup is failling to restore and displays an error message: backup either corrupt or not compatible with the device. This happened after updating to the latest software IOS7
I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.
-
At the very end of creating an email account the program asks for a software security device password, I have no idea what this is or where to find it. To my knowledge I don't have a "software security device". I am using Windows 7 on an IMac.
What is the exact prompt or error message you get?
-
I've spent 6 hours trying to update my iPad, and it doesn't work. It can't get past trying to back up, and just stops and gives an error code. I've deleted the backup, re-synced, and tried again and still no luck. What do I do now?
I am not running any antivirus software on my Mac, and I have the firewall shut off. Any other ideas? I have not problem downloading all other Apple software updates. I downloaded the latest iTunes software before starting the iPad update process.
-
Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200.
These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
I would guess your iphone has been hacked ( jailbroken ) ring any bells ? -
After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"
The system logs reads:
Mar 29 22:06:25 server servermgrd[82]: servermgr_web: Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
undefined method `downcase' for nil:NilClass
." UserInfo=0x7fc547901080 {NSLocalizedDescription=Failed to read settings: Exception:
undefined method `downcase' for nil:NilClassTo check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.
Maybe you are looking for
-
Error While Genrating Test Report in Test Plan Management
Hi Guru's I am getting an authorization error while generating test report via STWB_info. Just i selected the test package and while click the test report i am getting this error. Error during authorization check Message no. TWBHS540 Guide Me to
-
Presence status from iMessage not shown in Mail since Mavericks upgrade
I'm re-posting this in the Mail folder, maybe somebody here knows the answer: https://discussions.apple.com/message/24928633#24928633
-
Oracle 10G support for both Cyrillic and Western European Character Sets
Dear all, Our DB currently supports western EU characters sets but we need to also support Russian Characters. Is there a common character set for both? or some trick that does the job? Thanks. DB: Oracle 10G R2 OS: Linux Current Char Set: NLS_CHARAC
-
Dear All, I have created a project which spans for two years (from 2010 to 2011) and budgets are been allocated for both the years. 1st Phase (1st WBS Element) of the Project will be completed during 2010. Goods for 2nd phase (2nd WBS Element) were p
-
I am new to Web Dynpro. I am trying to create a simple Web dynpro following an SAP tutorial. The directions are as follows: step 1)In this step you first create a new component. To do this, call the Object Navigator and choose Web-Dynpro-Comp./Intf i