Extraction of POS data to BW without using POS DM

Hi there.
Does anyone know a way of extracting POS data from the Triquestra Infinity POS system directly into BW without using POS DM. I'm at a site where they are just using POS as a front-end and transferring most data into SAP ECC but not all data. For the data that's not going into ECC, we want to extract it into BW - mainly around Cashier Statistics. However POS DM won't be configured. I thought we caould send IDocs to BW but then not sure what to do with these IDocs once in BW.
Anyone has any thoughts?
Andrew.

Hi,
You can use Xi. Or if there is a relational database system of the POS system, you can use dbconnect or udconnect to connect the POS system. But if you dont use POS DM it will be difficult to map the data. You may be required you create and map infocubes from scratch.
Mustafa

Similar Messages

How to extract 64 bit data from imaq image using IMAQ Extract VI

I have LV 8.5.1, Vision 8.5 and need to extract 64 bit data from a 64 bit image and I get the "invalid image" error while using the IMAQ Extract VI. What version of Vision do I need to allow me to do this?
Currently, the work-around I have...
1) convert the image to 32bit
2) use the ROI tools I to get the rectangle data I need
3) then go back to the original image and the convert the image to a 64 bit array
4) take the rectangle data to extract the data needed out of the 64 bit array data.
klunky but it works. I would think that the IMAQ Extract tool should allow me to extract the 64 bit data but it doesnt... forces me to 32 bit.
suggestions?

steve05ram360 wrote:
awesome, that does work.
Attached DLL slightly corrected and should be OK also "in place" when Dst is not connected like original IMAQ function. Hopefully it works properly now. By the way all IMAQ types are supported, not only U64.
Andrey.
Attachments:
ADVExtractDLL.zip ‏9 KB

How to delete the data from KNVP without using the delete statement

Hello friends,
I have a requirement that I have to delete the data from KNVP table without using any delete statement. For it I have to use the Standard BAPI or any standard program.
Can you please tell me the name of the standard program or BAPI to delete the data .
Thanks in Advance
Kuldeep

Hello Raymond,
I have use the function 'CUSTOMER_UPDATE' in which I only gives the data in T_XKNVP table only but still the data is not get deleting. Please see the code below.
=============================================================
REPORT ZK_TEST2                                .
data :
    I_KNA1     LIKE     KNA1,
    I_KNB1     LIKE     KNB1,
    I_KNVV     LIKE     KNVV,
    I_YKNA1     LIKE     KNA1,
    I_YKNB1     LIKE     KNB1.
Data :
T_XKNAS       LIKE     FKNAS occurs 0,
T_XKNB5     LIKE     FKNB5 occurs 0,
T_XKNBK     LIKE     FKNBK occurs 0,
T_XKNVA     LIKE     FKNVA occurs 0,
T_XKNVD     LIKE     FKNVD occurs 0,
T_XKNVI     LIKE     FKNVI occurs 0,
T_XKNVK     LIKE     FKNVK occurs 0,
T_XKNVL     LIKE     FKNVL occurs 0,
T_XKNVP     LIKE     FKNVP occurs 0 with header line,
T_XKNVS     LIKE     FKNVS occurs 0,
T_XKNEX     LIKE     FKNEX occurs 0,
T_XKNZA     LIKE     FKNZA occurs 0,
T_YKNAS     LIKE     FKNAS occurs 0,
T_YKNB5     LIKE     FKNB5 occurs 0,
T_YKNBK     LIKE     FKNBK occurs 0,
T_YKNVA     LIKE     FKNVA occurs 0,
T_YKNVD     LIKE     FKNVD occurs 0,
T_YKNVI     LIKE     FKNVI occurs 0,
T_YKNVK     LIKE     FKNVK occurs 0,
T_YKNVL     LIKE     FKNVL occurs 0,
T_YKNVP     LIKE     FKNVP occurs 0 with header line,
T_YKNVS     LIKE     FKNVS occurs 0,
T_YKNEX     LIKE     FKNEX occurs 0,
T_YKNZA     LIKE     FKNZA occurs 0.
T_XKNVP-KUNNR     =     '7000002648'     .
*T_XKNVP-VKORG     =     '0001'     .
*T_XKNVP-VTWEG     =     '01'     .
*T_XKNVP-SPART     =     '01'     .
T_XKNVP-KZ      =     'D'     .
append T_XKNVP to T_XKNVP.
CALL FUNCTION 'CUSTOMER_UPDATE'
EXPORTING
    I_KNA1        = I_KNA1
    I_KNB1        = I_KNB1
    I_KNVV        = I_KNVV
    I_YKNA1       = I_YKNA1
    I_YKNB1       = I_YKNB1
TABLES
    T_XKNAS       = T_XKNAS
    T_XKNB5       = T_XKNB5
    T_XKNBK       = T_XKNBK
    T_XKNVA       = T_XKNVA
    T_XKNVD       = T_XKNVD
    T_XKNVI       = T_XKNVI
    T_XKNVK       = T_XKNVK
    T_XKNVL       = T_XKNVL
    T_XKNVP       = T_XKNVP
    T_XKNVS       = T_XKNVS
    T_XKNEX       = T_XKNEX
    T_XKNZA       = T_XKNZA
    T_YKNAS       = T_YKNAS
    T_YKNB5       = T_YKNB5
    T_YKNBK       = T_YKNBK
    T_YKNVA       = T_YKNVA
    T_YKNVD       = T_YKNVD
    T_YKNVI       = T_YKNVI
    T_YKNVK       = T_YKNVK
    T_YKNVL       = T_YKNVL
    T_YKNVP       = T_YKNVP
    T_YKNVS       = T_YKNVS
    T_YKNEX       = T_YKNEX
    T_YKNZA       = T_YKNZA
=============================================================

Can we get the data from list without using any change event...

It is possible to get the current data from list without passing events?...
Thanks in advance,
senthil.

Can you get what you want by accessing the selectedItem/selectedItems and selectedIndex/selectedIndices properties?

Can employee master data be stored without using Personnel Management?

Hi All,
I need some help...
I am working on 6.0. The company has decided to implement only Organizational Management, Time management and Training and Event Management modules. Can any one please tell me if its possible to do this without implementing personnel management??? And how would it be useful???

Hi Amit
Assuming that for instance a name and a prename are considered as "Personnel Management" (or personnel administration PA) data, the use of only organizational management OM will quite limit the advantages.
You could use OM to maintain the organizational chart, but without names on it... might be a bit boring.
But if you use Personnel Time Management PT and Training and Event Management TEM, I assume, that you use PA as well. Or how should this work if you are not able to assign the reported time to one person's ID?
cheers,
Benno

Any way to save data in loop without using shift register or feedback loop

Hello all
I was thinking, is it possible to save data in a loop to next iteration without the use of a shift register or a feedback loop?
I need the possibility to reload data within a loop from a lvm file, but I want to use the same data until i load some new ones.
The reason why I don't want to use the shift register or feedback node is due to speed, even though I am not sure if the shift register
actually moves all the data from one register to another, or if it is stationary until a change in the data occur.
The data I want to reuse is medium-large (6 force measurements, 2 pressure, 1 flow channels)of about 10sec data in each file with samplingsrate of 2kHz..
In my analysis program I have many CPU demanding calculations and 3D graphs, so I just want to minimize the CPU load as much as I can for each part of the
software..
I have attached a small VI to explain what I am talking about.
I now I shouldn't use the express VI, and I am going to change that as well - this is just a proof of concept!
Hope you guys can help me understand this shift register better...
Thanks!
- Tommy
Running LabVIEW 2009 32bit SP1 on Windows 7 64Bit
Solved!
Go to Solution.
Attachments:
visual.vi ‏34 KB

tombech wrote:
[...]The reason why I don't want to use the shift register or feedback node is due to speed[...]
Tommy,
shift register are the fastest you can ever get...........
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to access iCloud drive data in iPhone without using Safari

how can i access i Cloud Drive data in iPhone. there are no dedicated app like drop-box or one drive where we can use the app for the data on cloud
Is there a similar app where i can use the data in i Cloud drive without logging into safari

yugandhargali wrote:
Access The data In iPhone
Open the app with the data.

How to transfer data between spreadsheets without using Business Objects?

Hello, every time I try and log onto the business objects platform I keep getting "this system can be contacted but there is no central management server running at port 6400". All I need to do is pass variables between spreadsheets. Both files are located in the same folder. Below are the links ive tried but have been unsuccessful to pass data.
(This link I used the swf loader component child and flash variables task Daya posted on Feb 15. However nothing loaded. The link wasnt a link i could display is in a browser. So i kept getting 0% when in preview mode.
Passing values from dashboard to dashboard with Flash Variables
Next I tried the following link. I did everything word for word and was able to display both files on the html page, but no link or connection between them existed. I would select a state and noting happened to the other swf files chart. Does this need to be in the Business Objects platform?
Dashboards 4.0: Connect to an external
Lastly , I used the link below. I followed everything and was able to get interaction from the parent to child however with only the files that were available on this thread. Their URL was this http://myxcelsius.com/wp-content/uploads/2010/10/child.swf?salesman=Schrute,Dwight. I get the concatenation but I dont get how this URL was generated? How do I develop my URL? My URL is able to display in a browser. My URL is
http://kln-ftvp/KLNPheonix//LinkToReport.htm?fqn=MyEnterprise.Public.graphtest&run=true
SWF Loader shows 100% instead of Dashboard.
Even with my URL being able to display in internet explorer, I still only show 100% and a blank screen. Can anyone help me with any of the issues I am having trouble with? Your help is most appreciated. Thank you.

It looks like you have more than one problems so it might be good to separate them out.
Issue 1 - Logging on to BusinessObjects
You say that when you try log on to the BO Platform you get the error message there is no central management server running on port 6400. I'm assuming you are trying to do this from the Dashboard designer.
Does it work when you try to log on from the web browser?
Make sure that you enter the correct system name in the system field when trying to log on from Designer. If you are unsure, either check what system name is used when you log on from your browser or check with your BO administrator.
Issue 2 - Passing values to a child dashboard
If you try to preview the dashboard in the designer, remember that the swf loader doesn't work in preview mode, so whatever you are trying to display won't be visible.
First of all you need to have 2 separate flash files that works independently of each other. The one that you are planning to use as a child flash, make sure that you create the flash variables so you can pass variables to it and use them to filter your data if that is your requirement. But hold off on that for now.
When you have 2 working flash files, save them both to the BI Launch Pad (or InfoView if you are on 3.1) and make sure they both work there. Then get the opendocument url for the child dashboard and try to open it in your browser directly using this url. If that works, use the same url in the swf viewer in the parent dashboard, save the parent dashboard back to BI Launch Pad and open it. It should now work.
Let me know if you have any problems with these steps.
Cheers,
Josh

How to convert XMLTYPE data into CLOB without using getclobval()

Please tell me how to convert data which is stored in the table in XMLTYPE column to a CLOB.
When i use getClobVal(), i get an error. So please tell me some other option except getClobVal()

CREATE OR REPLACE PACKAGE BODY CONVERT_XML_TO_HTML AS
 FUNCTION GENERATE_HTML(TABLE_NAME VARCHAR2, FILE_NAME VARCHAR2, STYLESHEET_QUERY VARCHAR2, WHERE_CLAUSE VARCHAR2, ORDERBY_CLAUSE VARCHAR2) RETURN CLOB IS
 lHTMLOutput XMLType;
 lXSL CLOB;
 lXMLData XMLType;
 FILEID UTL_FILE.FILE_TYPE;
 HTML_RESULT CLOB;
 SQL_QUERY VARCHAR2(300);
 WHERE_QUERY VARCHAR2(200);
 fileDirectory VARCHAR2(100);
 slashPosition NUMBER;
 actual_fileName VARCHAR2(100);
 XML_HTML_REF_CUR_PT XML_HTML_REF_CUR;
 BEGIN
 IF WHERE_CLAUSE IS NOT NULL AND ORDERBY_CLAUSE IS NOT NULL THEN
 SQL_QUERY := 'SELECT * FROM ' || TABLE_NAME ||' WHERE ' || WHERE_CLAUSE || ' ORDER BY ' || ORDERBY_CLAUSE;
 ELSE IF WHERE_CLAUSE IS NOT NULL AND ORDERBY_CLAUSE IS NULL THEN
 SQL_QUERY := 'SELECT * FROM ' || TABLE_NAME || ' WHERE ' || WHERE_CLAUSE;
 ELSE IF WHERE_CLAUSE IS NULL AND ORDERBY_CLAUSE IS NOT NULL THEN
 SQL_QUERY := 'SELECT * FROM ' || TABLE_NAME || ' ORDER BY ' || ORDERBY_CLAUSE;
 ELSE IF WHERE_CLAUSE IS NULL AND ORDERBY_CLAUSE IS NULL THEN
 SQL_QUERY := 'SELECT * FROM ' || TABLE_NAME;
 END IF;
 END IF;
 END IF;
 END IF;
 OPEN XML_HTML_REF_CUR_PT FOR SQL_QUERY;
 lXMLData := GENERATE_XML(XML_HTML_REF_CUR_PT);
 --lXSL := GET_STYLESHEET(STYLESHEET_QUERY);
 if(lXMLData is not null) then
 dbms_output.put_line('lXMLData pass');
 else
 dbms_output.put_line('lXMLData fail');
 end if;
 lHTMLOutput := lXMLData.transform(XMLType(STYLESHEET_QUERY));
 --INSERT INTO TEMP_CLOB_TAB2 VALUES(CLOB(lHTMLOutput));
 if(lHTMLOutput is not null) then
 dbms_output.put_line('lHTMLOutput pass');
 else
 dbms_output.put_line('lHTMLOutput fail');
 end if;
 HTML_RESULT := lHTMLOutput.getclobVal();
 if(HTML_RESULT is not null) then
 dbms_output.put_line('HTML_RESULT pass'||HTML_RESULT);
 else
 dbms_output.put_line('HTML_RESULT fail');
 end if;
 -- If the filename has been supplied ...
 IF FILE_NAME IS NOT NULL THEN
-- locate the final '/' or '\' in the pathname ...
 slashPosition := INSTR(FILE_NAME, '/', -1 );
 IF slashPosition = 0 THEN
 slashPosition := INSTR(FILE_NAME,'\', -1 );
 END IF;
-- separate the filename from the directory name ...
 fileDirectory := SUBSTR(FILE_NAME, 1,slashPosition - 1 );
 actual_fileName := SUBSTR(FILE_NAME, slashPosition + 1 );
 END IF;
 DBMS_OUTPUT.PUT_LINE(fileDirectory||' ' ||actual_fileName);
 FILEID := UTL_FILE.FOPEN(fileDirectory,actual_fileName, 'W');
 UTL_FILE.PUT_LINE(FILEID, '<title> hi </title>');
 UTL_FILE.PUT_LINE(FILEID, HTML_RESULT);
 UTL_FILE.FCLOSE (FILEID);
DBMS_OUTPUT.PUT_LINE('CLOB SIZE'||DBMS_LOB.GETLENGTH(HTML_RESULT));
 RETURN HTML_RESULT;
 --RETURN lHTMLOutput;
 EXCEPTION
 WHEN OTHERS
 THEN DBMS_OUTPUT.PUT_LINE('ERROR!!!!!!!!!!!!');
 END GENERATE_HTML;
 FUNCTION GENERATE_XML(XML_HTML_REF_CUR_PT XML_HTML_REF_CUR) RETURN XMLType IS
 qryCtx DBMS_XMLGEN.ctxHandle;
 result CLOB;
 result1 xmltype;
 BEGIN
 qryCtx := DBMS_XMLGEN.newContext(XML_HTML_REF_CUR_PT);
 result := DBMS_XMLGEN.getXML(qryCtx);
 --dbms_output.put_line(result);
 result1 := xmltype(result);
 INSERT INTO temp_clob VALUES(result);
 if(result1 is not null) then
 dbms_output.put_line('pass');
 else
 dbms_output.put_line('fail');
 end if;
 return result1;
 DBMS_XMLGEN.closeContext(qryCtx);
 END GENERATE_XML;
END CONVERT_XML_TO_HTML;
This is the code which i am using to generate the XML and subsequently to generate the HTML output out of that using a XSL stylesheet.
The error is Numeric or value error..

Can i transfer photos from my old iphone directly in to "Moments" WITH the date and such WITHOUT USING ICLOUD?

I had an iPhone 5 and now i iPhone 6. I saved all the photos in a folder on my computer. How can i transfer all these photos in to my moments folder so they will also have a date on them and correspond with the dates on my current phone's photos. I DO NOT WANT TO PUT THEM IN A SEPARATE FOLDER AND I DONT WANT TO USE ICLOUD because i have over 13gigs of photos

Can you just back-up the old phone to iTunes and restore it from there?

How to convert row data into columns without using pivot table?

Hello guys
I have a report that has several columns about sales call type and call counts
It looks like this:
Calls Type Call Counts
Missed 200
Handled 3000000
Rejected 40000
Dropped 50000
Now I wanna create a report that look like this:
Missed call counts Handled Call counts Rejected Counts Drop counts Other Columns
200 300000000 40000 50000 Data
So that I can perform other calculations on the difference and comparison of handled calls counts vs other call counts..
I know pivot table view can make the report look like in such way, but they cant do further calculations on that..
So I need to create new solid columns that capture call counts based on call types..
How would I be able to do that on Answers? I don't have access to the RPD, so is it possible to do it sololy on answers? Or should I just ask ETL support on this?
Any pointers will be deeply appreciated!
Thank you

Thanks MMA
I followed your guidance and I was able to create a few new columns of call missed count, call handled counts and call abandoned counts.. Then I create new columns of ave missed counts, ave handled counts and so forth..
Then I went to the pivot view, I realized there is a small problem.. Basically the report still includes the column "call types" which has 3 different types of call "miss, abandon and handled". When I exclude this column in my report, the rest of the measures will return wrong values. When I include this column in the report, it shows duplicate values by 3 rows. It looks like this:
Queue name Call types Call handled Call missed Call abondoned
A Miss 8 10 15
A Handled 8 10 15
A Abandoned 8 10 15
in pivot table view, if I move call type to column area, the resulted measures will become 8X3, 10X3 and 15X3
So is there a way to eliminate duplicate rows or let the system know not to mulitply by 3?
Or is this as far as presentation service can go in terms of this? Or should I advice to provide better data from the back end?
Please let me know, thanks

Unable to extract Customer Master data from MDC

Hello,
We creating an MDM-XI-ERP2005 Customer scenario. We want to work with all bussiness scenarios (not customizing scenario).
First I'm trying to extract Customer Master Data from EP 2005 using MDM_CLNT_EXTR.
I have created a New Variant which properties are:
Variant: CUSTOMER_TOTAL
Description: Send all customer data to MDM
Extraction Object: CUSTOMER_EXTRACT.
Target System: PI7.
But, the display jobs shows the following error: Could not determine recipients for message type MDMRECEIPT. Job cancelled after system exception.
We need to focus the problem. We have done the following ALE configuration.
SALE transaction:
In Basic Settings -> Logical Systems -> Define Logical System we have add the following logical systems:
              EUS100
              MDM: Master Data Management
              PI7: Process Integration 7.0
WE21:
Transactional RFC -> PI7, IDOC record types SAP Release 4.x
RFC destination: SAPSLDAPI
BD64
New Model -> PFMC
Add message type: Model iview: PFMC
                             Sender: EUS100
                              Receiver: PI7
                             Message Type: DEBMDM
WE20 transaction shows:
Partner profiles -> Partner Type LS (logical system)
                    PI7: Outbound parmtrs. DEBMDM, SYNCH.
Any idea will be very helpful,
Thanks in advance
Marta.
Edited by: Marta Sánchez on Jul 9, 2008 12:34 PM

Sorry because I made a mistake in my previous message. ALE seems to be correctly configured. I'll try to update correctly my current situation:
In WE02 I can see al IDOCs that I'm trying to send to XI. All them have the IDoc Status = 3 (Data Passed to Port OK) instead of 12 Status Dispatch OK :(. So, It seems an tRFC error.
SM58 shows me more trails: "Basic type 'DEBMDM06' is unknown"
before that I have done the following steps at SAP ERP:
    1. WE21: I have created a PI7 port with 700PI70CLNT RFC.
    2. SM59: I have checked successfully 700PI70CLNT RFC connection.
    3. WE20: I have created a PI7 Partner Type LS with the following inbound and outbound parameters: DEBMDM and MDMRECEIPT.
    4. BD64: I have created a Distribution Model with DEBMDM and MDMRECEIPT message types.
and at SAP PI:
     5.IDX: Port: SAPEUS. Client: 111. RFC Destination: PI7.
     6. technical and business system for sender SAP system(System Landscape Directory)...
- Maybe some of the previous steps is not correct....
- Is RFC Destination = PI7 is correct in step #5?
- Is also necessary to configure more steps in PI system like RFC destinations or Transactional port?
- I have read that is neccessary to check that the option "transfer idoc immediately" in we20. How?
Please any idea will be very helpful.......
Thank you!
Best regards,
Marta.

Recovering dropped table without using pointing time recovery/

Hi geeks,
Noob here.I have a question*.I want to recover the dropped table with data with out using pointing time recovery.*
for Ex:Use hasr dropped the table at 10:00 and realized that he dropped the table at 16:00hrs .So i want to fetch the data(DDL+DML) without using pointing time recovery.
So please find answers for my question.
Thank you,
Rakesh M.

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version (result of SELECT * FROM V$VERSION).
>
Noob here.I have a question*.I want to recover the dropped table with data with out using pointing time recovery.*
for Ex:Use hasr dropped the table at 10:00 and realized that he dropped the table at 16:00hrs .So i want to fetch the data(DDL+DML) without using pointing time recovery.
>
FLASHBACK TABLE myTable TO BEFORE DROP;
See the examples in the FLASHBACK TABLE section of the SQL Language doc
http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_9012.htm
>
Retrieving a Dropped Table: Example If you accidentally drop the pm.print_media table and want to retrieve it, then issue the following statement:
FLASHBACK TABLE print_media TO BEFORE DROP;
If another print_media table has been created in the pm schema, then use the RENAME TO clause to rename the retrieved table:
FLASHBACK TABLE print_media TO BEFORE DROP RENAME TO print_media_old;
If you know that the employees table has been dropped multiple times, and you want to retrieve the oldest version, then query the USER_RECYLEBIN table to determine the system-generated name, and then use that name in the FLASHBACK TABLE statement. (System-generated names in your database will differ from those shown here.)
SELECT object_name, droptime FROM user_recyclebin
WHERE original_name = 'PRINT_MEDIA';
OBJECT_NAME DROPTIME
RB$$45703$TABLE$0 2003-06-03:15:26:39
RB$$45704$TABLE$0 2003-06-12:12:27:27
RB$$45705$TABLE$0 2003-07-08:09:28:01

Extracting Time without using the System Date and Time

Hi, can I know how to process a task at this particular time eg. 6PM everyday without using the System Date and Time..
Do I need to use a Timer to get this done or is there any other solution to do this? Can give me a few hints? Thanks in advance =D

You could use a timer...assuming you had some good reference point when you started so you would know that from your starting point it's now 6pm.
I thought I saw you asked this question once already...and you were given a similar answer....I think by Sylviae?

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

Extraction of POS data to BW without using POS DM

Similar Messages

Maybe you are looking for