Extraction RSA3 timed out

Hi All
When i am doing extraction in rsa3 ,giving me time out error.With some selection in selection screen i am getting results,without any inputs to selection screen i am getting this error.Is there any way to solve it or runnung the extractor code in background job is possible?.This is standard extractor
Thanks
Vamsi

There is something with the computer or browser that is triggering this. I have tested the website now and found it still not problematic. Please try using a different browser than what you are using now. Also you will want to check to make sure there is no software running that is regualrly deleting the temporary internet files and cookies.
If that is still not working, you may need to run your browser in compatibility mode. For Internet Explorer, you do it by Please go into the"Tools" menu and click to turn on "compatibility view". It should allow you to sort after doing that. If you do not wish to enable compatibility view every time you want to sort, Go into compatibility view settings and add the site www.verizon.com to the list.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

BIPCatalogUtil extraction always fails with "Connection timed out"

BIPCatalogUtil extraction always fails with "Connection timed out".
Any suggestions on what could be the issue?

One thought was that perhaps it was timing out going out some unused port (e.g., the Airport port), but a list shows only the Ethernet port is enabled:
admin$ sudo networksetup -listallnetworkservices
An asterisk (*) denotes that a network service is disabled.
Built-in Ethernet
*AirPort
*Built-in FireWire
*Bluetooth

Connection to host (ip adress), service timed out

Hi ,
I am getting the below error in dev_server0 while deploying the SAPJTECHS.SCA file in SDM.
[Thr 267] * ERROR connection to host 192.168.1.15, service sapgw11 timed out
[Thr 267] *
TIME Mon Jan 24 10:51:24 2011
[Thr 267] * RELEASE 640
[Thr 267] * COMPONENT NI (network interface)
[Thr 267] * VERSION 37
[Thr 267] * RC -12
[Thr 267] * MODULE nixxi_r_mt.cpp
[Thr 267] * LINE 1109
[Thr 267] * DETAIL NiPConnect
[Thr 267] * COUNTER 11
[Thr 267] *
[Thr 267] *****************************************************************************
Kindly suggest.
regards,
Mahesh.N.R

And below is the error in SDM log.
Jan 24, 2011 10:40:10... Info: End of log messages of the target system.
Jan 24, 2011 10:40:10... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jan 24, 2011 10:40:10... Error: Aborted: development component 'com.sap.engine.docs.examples'/'sap.com'/'SAP AG'/'6.4025.00.0000.20091105122001.0000'/'27', grouped by software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.6.40.25.0.20091119165445''/'27':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.engine.docs.examples..
Reason: Cannot extract WAR file [temp_default.war] of application [sap.com/com.sap.engine.docs.examples].; nested exception is:
 com.sap.engine.services.deploy.container.DeploymentException: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.servlets_jsp.server.exceptions.WebDeploymentException: Cannot extract WAR file [temp_default.war] of application [sap.com/com.sap.engine.docs.examples].
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:120)
 at com.sap.engine.services.servlets_jsp.server.container.DeployAction.deploy(DeployAction.java:124)
 at com.sap.engine.services.servlets_jsp.server.container.WebContainer.deploy(WebContainer.java:153)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
 at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3187)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
 at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.engine.services.servlets_jsp.server.exceptions.WebFileNotFoundException: Possible reason: file name is too long.
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:795)
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:113)
 ... 19 more
Caused by: java.io.FileNotFoundException: /usr/sap/PQA/JC50/j2ee/cluster/server1/apps/sap.com/com.sap.engine.docs.examples/servlet_jsp/_default/root/apidocs/allclasses-frame.html (Permission denied)
 at java.io.FileOutputStream.open(Native Method)
 at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
 at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
 at com.sap.engine.lib.io.FileUtils.writeToFile(FileUtils.java:159)
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:784)
 ... 20 more
', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.engine.services.servlets_jsp.server.exceptions.WebDeploymentException: Cannot extract WAR file [temp_default.war] of application [sap.com/com.sap.engine.docs.examples].
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:120)
 at com.sap.engine.services.servlets_jsp.server.container.DeployAction.deploy(DeployAction.java:124)
 at com.sap.engine.services.servlets_jsp.server.container.WebContainer.deploy(WebContainer.java:153)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
 at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3187)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
 at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.engine.services.servlets_jsp.server.exceptions.WebFileNotFoundException: Possible reason: file name is too long.
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:795)
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:113)
 ... 19 more
Caused by: java.io.FileNotFoundException: /usr/sap/PQA/JC50/j2ee/cluster/server1/apps/sap.com/com.sap.engine.docs.examples/servlet_jsp/_default/root/apidocs/allclasses-frame.html (Permission denied)
 at java.io.FileOutputStream.open(Native Method)
 at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
 at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
 at com.sap.engine.lib.io.FileUtils.writeToFile(FileUtils.java:159)
 at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:784)
 ... 20 more

JZ0T3: Read operation timed out

Hi! I'm trying to solve this problem for a while and actually I couldnt find the cause of the problem.
For some reason, deep inside the code of my application that error happends when I execute some inserts on the same Sybase table (they could be performed concurrently). I said "deep inside the code" since if I test a similar code, but outside the application (that is, just executing the inserts in a stand alone java main) the problem can't be reproduced.
The connection is obtained normally as follows:
try {
Class.forName("com.sybase.jdbc2.jdbc.SybDriver");
}catch (ClassNotFoundException e) {
System.out.println("Oops!");
Connection conn = DriverManager.getConnection(url,user,psw);
conn.setAutoCommit(true);
The driver been used is jconnect 4.5
Then, several inserts are performed:
String exampleQuery = "INSERT INTO SampleTable (id) VALUES ("1")\nSELECT @@IDENTITY";
PreparedStatement stmt = conn.prepareStatement(exampleQuery);
ResultSet rs = stmt.executeQuery();
if (rs.next())
System.out.println(rs.getInt(1));
Some of the query executions raise the following exception:
java.sql.SQLException: JZ006: Caught IOException: java.io.IOException: JZ0T3: Read operation timed out.
     at com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:485)
     at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:2961)
     at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:1796)
     at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
     at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:201)
     at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:182)
     at com.sybase.jdbc2.jdbc.SybStatement.queryLoop(SybStatement.java:1455)
     at com.sybase.jdbc2.jdbc.SybStatement.executeQuery(SybStatement.java:1440)
     at com.sybase.jdbc2.jdbc.SybPreparedStatement.executeQuery(SybPreparedStatement.java:70)
I've just found a workarround to solve this problem: synchronizing the execution of the query. That seems to avoid concurrent insertion.
The funny thing is: when I extract the code from the application and execute it in a stand alone java main, even stressing with multiple threads executing batch inserts in a for clause, the problem NEVER happends.
Any tip is welcome since I actually don't know what to do. Thanks a lot, I hope anyone replies!!
Bye!

Hi Sean,
I informed the senior developer and she said she has emailed the Oracle regarding this issue. We are developing a website for a company who has purchased the Oracle CRM on demand. Is it mandatory for every one to create a service request? You can email me at [email protected] and I will contact you directly.
Thanks
Jay

Issue with flat file loading timing out

Hello
I have a scenario, where I am loading a flat file with 65k records into a cube. The problem is, in the loading process, I have to look up the 0Material table which has a million records.
I do have an internal table in the program, where I select a subset of the Material table ie around 20k to 30k records. But my extraction process takes more than 1 1/2 hrs and is failing (timed out).
How can i address this issue? I tried building indexes on the Material table and its not helping.
Thanks,
Srinivas.

Unfortunately, this is BW 3.5, so there is no END routine option here. And I tried both .csv and notepad file methods, and both are creating problems for us.
This is the total code, do you guyz see any potential issues:
Start Routine (main code)
refresh i_oldmats.
refresh ZI_MATL.
data: wa_datapak type transfer_structure.
loop at datapak into wa_datapak. (** I collect all the old material numbers from my flat file into an internal table i_oldmats**)
   i_oldmats-/BIC/ZZOLDMATL = wa_datapak-/BIC/ZZOLDMATL.
   collect i_oldmats.
endloop.
sort i_oldmats.
SELECT /BIC/ZZOLDMATL MATERIAL (** ZI_MATL only has recs. where old materials exist, this gets about 300k records out of 1M**)
         FROM /BI0/PMATERIAL
         INTO ZI_MATL FOR ALL
         ENTRIES in i_oldmats WHERE
          /BIC/ZZOLDMATL = i_oldmats-/BIC/ZZOLDMATL .
            collect    ZI_MATL.
Endselect.
Sort ZI_MATL.
Transfer rule routine (main code)
IF TRAN_STRUCTURE-MATERIAL = 'NA'.
    READ TABLE ZI_MATL INTO ZW_MATL
    WITH KEY /BIC/ZZOLDMATL = TRAN_STRUCTURE-/BIC/ZZOLDMATL
    BINARY SEARCH.
    IF SY-SUBRC = 0.
      RESULT = ZW_MATL-MATERIAL.
    ENDIF.
ELSE.
    RESULT = TRAN_STRUCTURE-MATERIAL.
ENDIF.
Regards,
Srinivas.

SA TIMED OUT errors

Hello!
I'm getting the following "SA TIMED OUT" errors in my amavis.log file and would like to solve the problem. The time outs seem to causing delays in the processing of mail. I have upgraded clamav to use clamd as per Alex's tutorial at topicdesk.com and that seems to be working ok.
Here are a few of the errors extracted from the log file...
Aug 6 22:44:04 dns1.newzealand.co.nz /usr/bin/amavisd[24250]: (24250-10) SA TIMED OUT, backtrace: at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/Locker.pm line 67\n\teval {...} called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/Locker.pm line 67\n\tMail::SpamAssassin::Locker::jitteryone_secondsleep('Mail::SpamAssassin::Locker::UnixNFSSafe=HASH(0x23cd5e0)') called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/Locker/UnixNFSSafe.pm line 80\n\tMail::SpamAssassin::Locker::UnixNFSSafe::safe_lock('Mail::SpamAssassin::L ocker::UnixNFSSafe=HASH(0x23cd5e0)', '/var/amavis/.spamassassin/auto-whitelist', 30) called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/DBBasedAddrList.pm line 70\n\tMail::SpamAssassin::DBBasedAddrList::new_checker('Mail::SpamAssassin::DBB asedAddrList=HASH(0xfad5c)', 'Mail::SpamAssassin=HASH(0x1d9872c)') called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/AutoWhitelist.pm line 70\n\tMail::SpamAssassin::AutoW...
Aug 7 01:29:35 dns1.newzealand.co.nz /usr/bin/amavisd[740]: (00740-04) SA TIMED OUT, backtrace: at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/Locker.pm line 67\n\teval {...} called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/Locker.pm line 67\n\tMail::SpamAssassin::Locker::jitteryone_secondsleep('Mail::SpamAssassin::Locker::UnixNFSSafe=HASH(0x23cd5e0)') called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/Locker/UnixNFSSafe.pm line 80\n\tMail::SpamAssassin::Locker::UnixNFSSafe::safe_lock('Mail::SpamAssassin::L ocker::UnixNFSSafe=HASH(0x23cd5e0)', '/var/amavis/.spamassassin/auto-whitelist', 30) called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/DBBasedAddrList.pm line 70\n\tMail::SpamAssassin::DBBasedAddrList::new_checker('Mail::SpamAssassin::DBB asedAddrList=HASH(0x1e9972c)', 'Mail::SpamAssassin=HASH(0x1d9872c)') called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/AutoWhitelist.pm line 70\n\tMail::SpamAssassin::Aut...
Aug 7 01:51:43 dns1.newzealand.co.nz /usr/bin/amavisd[1906]: (01906-01) SA TIMED OUT, backtrace: at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/DBBasedAddrList.pm line 167\n\teval {...} called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/DBBasedAddrList.pm line 167\n\tMail::SpamAssassin::DBBasedAddrList::remove_entry('Mail::SpamAssassin::D BBasedAddrList=HASH(0x4870090)', 'HASH(0x4870108)') called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/AutoWhitelist.pm line 110\n\tMail::SpamAssassin::AutoWhitelist::check_address('Mail::SpamAssassin::Au toWhitelist=HASH(0x4870048)', '[email protected]', 81.192.135.247) called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/EvalTests.pm line 902\n\teval {...} called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/EvalTests.pm line 898\n\tMail::SpamAssassin::PerMsgStatus::checkfrom_in_autowhitelist('Mail::SpamAssassin::PerMsgStatus=HASH(0x48602b8)') called at /System/Library/Perl/Extr...
Aug 7 01:54:32 dns1.newzealand.co.nz /usr/bin/amavisd[1992]: (01992-01) SA TIMED OUT, backtrace: at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/Locker.pm line 67\n\teval {...} called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/Locker.pm line 67\n\tMail::SpamAssassin::Locker::jitteryone_secondsleep('Mail::SpamAssassin::Locker::UnixNFSSafe=HASH(0x23cd5e0)') called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/Locker/UnixNFSSafe.pm line 80\n\tMail::SpamAssassin::Locker::UnixNFSSafe::safe_lock('Mail::SpamAssassin::L ocker::UnixNFSSafe=HASH(0x23cd5e0)', '/var/amavis/.spamassassin/auto-whitelist', 30) called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/DBBasedAddrList.pm line 70\n\tMail::SpamAssassin::DBBasedAddrList::new_checker('Mail::SpamAssassin::DBB asedAddrList=HASH(0x1e9972c)', 'Mail::SpamAssassin=HASH(0x1d9872c)') called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/AutoWhitelist.pm line 70\n\tMail::SpamAssassin::Aut...
Aug 7 01:56:05 dns1.newzealand.co.nz /usr/bin/amavisd[1992]: (01992-04) SA TIMED OUT, backtrace: at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/DBBasedAddrList.pm line 167\n\teval {...} called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/DBBasedAddrList.pm line 167\n\tMail::SpamAssassin::DBBasedAddrList::remove_entry('Mail::SpamAssassin::D BBasedAddrList=HASH(0x48ab568)', 'HASH(0x79bc3c)') called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/AutoWhitelist.pm line 110\n\tMail::SpamAssassin::AutoWhitelist::check_address('Mail::SpamAssassin::Au toWhitelist=HASH(0x41fa48)', '[email protected]', 81.192.135.247) called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/EvalTests.pm line 902\n\teval {...} called at /System/Library/Perl/Extras/5.8.6/Mail/SpamAssassin/EvalTests.pm line 898\n\tMail::SpamAssassin::PerMsgStatus::checkfrom_in_autowhitelist('Mail::SpamAssassin::PerMsgStatus=HASH(0x488b5f8)') called at /System/Library/Perl/E...
Any help would be appreciated!
Thanks,
Regan

Hi Alex
Thanks for your reply - when I originally looked it appeared that perl was sucking up CPU resources, although I didn't check using top -o cpu at the time. Since posting my original message above I turned off some options in my local.cf file which fixed, or more accurately "bypassed" the problem. Not really ideal but it stopped the backlogging of mail - I'd rather fix it if I could.
The changes I made in the local.cf file were:
skiprblchecks 1
bayesautolearn 0
use_bayes 0
postconf -n gives the following...
allowuntrustedrouting = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
delaywarningtime = 6h
disablevrfycommand = yes
enableserveroptions = yes
fastflushdomains = $relay_domains
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
maximalqueuelifetime = 5d
messagesizelimit = 0
mydestination = $myhostname,localhost.$mydomain,localhost
mydomain = newzealand.co.nz
mydomain_fallback = localhost
myhostname = smtp.newzealand.co.nz
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = permit_mynetworks rejectrblclient sbl-xbl.spamhaus.org rejectrblclient smtp.dnsbl.sorbs.net permit
smtpddelayreject = no
smtpderror_sleeptime = 1s
smtpdhard_errorlimit = 20
smtpdhelorequired = yes
smtpdhelorestrictions = permit_mynetworks, rejectnon_fqdnhostname, rejectinvalidhostname, permit
smtpdpw_server_securityoptions = login,plain
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdsoft_errorlimit = 10
smtpdtlsCAfile = /etc/certificates/secure.newzealand.co.nz.chcrt
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
virtualaliasmaps = hash:/etc/postfix/virtual
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
regan

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

ACS 5.1 Failure: 5411 EAP session timed out -- Wired 802.1X, machine-authentication

Hi guys,
I have a strange error here and I`m really disappointed.
We currently try to do "Wired-802.1X" with our Windows XP SP3 Clients with EAP-TLS and "machine-only" authentication.
We use ACS5.1 to authenticate the clients. At about 50% of the clients authentication works fine.
At the other clients we can see a strange error at the ACS.
At the Reports page --> "Authentications - RADIUS - Today" we see that a client is trying to authenticate, but this fails with the Failure Code: 5411 EAP session timed out.
Logged At RADIUS
Status NAS
Failure Details Username MAC/IP
Address Access Service Authentication
Method Network Device NAS IP Address NAS Port ID CTS
Security Group ACS Instance Failure Reason
Sep 2,10 3:37:46.916 PM
Wired_802.1X_EAP-TLS
EAP-TLS
svacs01
5411 EAP session timed out
Steps
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
Evaluating Service Selection Policy
15004 Matched rule
15012 Selected Access Service - Wired_802.1X_EAP-TLS
11507 Extracted EAP-Response/Identity
12500 Prepared EAP-Request proposing EAP-TLS with challenge
11006 Returned RADIUS Access-Challenge
5411 EAP session timed out
At the switch I used "Authentication Open" to get the client working and capture traffic with wireshark.
Switch --> Request Identity --> Client
Switch <-- Response Identity <-- Client
Switch --> Request EAP-TLS --> Client
Switch --> Request EAP-TLS --> Client
Switch --> Request EAP-TLS --> Client
Switch --> Request Identity --> Client
Switch --> Request Identity --> Client
Switch --> Request Identity --> Client
What is missing ist the Switch <-- Response EAP-TLS <-- Client
Any ideas what is going wrong ? Maybe someone had this error before ?
Any suggestions how to debug this ?
Thank you very much for your help!
Mathias

Hi @all,
I have this issue too. It occurs in our wireless environment. The problem for me is that I don't know which client (or clients) causes the error. The error occur many times per day.
Logged At RADIUS
Status NAS
Failure Details Username MAC/IP
Address Access Service Authentication
Method Network Device NAS IP Address NAS Port ID CTS
Security Group ACS Instance Failure Reason
Sep 7,10 11:50:36.143 PM
dot1x wireless
PEAP
bfnetacs01
5411 EAP session timed out
Kind regards,
Michael

Processing in Warehouse timed out; processing steps mising

Hi All,
Recently i am getting error Processing in warehouse timed out When iam loading the Master data from flat file to BW .
Inspite of loading many times getting the same error.
Earlier it was perfect.
What are the possible reasons for the same?
Can anybody help?
Regards,
C.V.
Message was edited by: P.C.V.

Hi Maik,
I am new to this support job. Could u please tell me step by step to check ale and trfc status for the loads and where i have to check for Processing status?
actually iam extracting data from Flat file.
Following is the error message in Status TAB in Monitoring
Processing in Warehouse timed out; processing steps mising
Diagnosis
Processing the request in the BW system is taking a long time and the processing step has still not been executed.
System response
<DS:DE.RSCALLER>Caller is still missing.
Procedure
Check in the process overview in the BW system whether processes are running in the BW system under the background user.
If this is not the case, check the short dump overview in the BW system.

4.2 Update Failure. "The network connection timed out"

After downloading 4.2 just before installation the error message pops up:
"The was a problem downloading the software for the iPhone "XXX". The network connection timed out.
Make sure your network setting are correct and your network connection is active, or try again later"
This happens on different machines in different locations (IPs).
What is it and to fix it???

I have had the same problem trying to update to 4.3 on both my iphone 4 and my kids' ipod touches. The problem seems to come after the huge 400-700MB downloads when itunes extracts the software or verifies the download with Apple. This is what seems to get blocked by the firewall.
Turning off Kaspersky Internet security for the duration of the software download and update sorted the problem.
I could not find a different solution. Once it is completed then you can re-enable your security software.
If you are really paranoid about turning off your security software then I guess you will need to mess around with the firewall settings to allow itunes free access through the firewall but it may take some trial and error.

Mac Updates timed out

When I attempt to download updates from the App Store, it fails and I get the following message "An error has occurred. The request timed out (-1001)". It has failed many times. I have a fairly high speed connection 12Mbp. How can I update my software? Thanks

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

HT2186 I just bought an iMac, while setting it up I was prompted to update the OS software. I tried to update it. It won't complete the update, and says "Error- requested timed out. (102) what does that mean? how do I fix it?

I just bought an iMac, while setting it up I was prompted to update the OS software. I tried to update it. It won't complete the update, and says "Error- requested timed out. (102) what does that mean? how do I fix it?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

I need to restore Iphone 1st generation itunes connection timed out

I have an Iphone 1st generation..The phone recently went on RECOVERY MODE...I have managed to get my Windows 7 pc to recognize the device. Itunes opens as it should...it downloads the new software it also extract software from the Iphone, but when it comes to the final activation step...i get an error message on itunes indicating that Itunes timed out and could not connect to the network, please check netword connections. When i unplugg the iphone itunes connects perfectly fine and i have already turned off my Antivirus firewall and I have also made sure that the itunes version is current but i cannot get my iphone to activate...please help!

Hello Jenny.D,
From what I can gather, you are experiencing issue restoring your iPhone 5. Take a look at the following article which includes some helpful troubleshooting steps:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Webservice calls timing out more tha they should

I am calling a REST webservice and set a read and connection timeout of 15,000 milliseconds. Probably 1 out of 3 calls is timing out although I dont think the length of the timeout needs to be increased because when it does work it returns the data in less than a second, and increasing the timeout to 60,000 ms doesn't improve the number of timeouts. When a query fails I retry it upto 5 times before eventually givving up, it always eventually manages to work within the 5 try limit, If I post the same query in a webbrowser it invariably returns correctly almost immediately. I have asked the provider of the webservice if their system is overloaded - they dont think so.
So Im now wondering if my code is incorrect, it receives a SocketTimeoutException when things go wrong. Is it correct for me to get the response code before I get the input stream, do I need to check that something is ready
before I access the inputstream. Here is an extract .
URL url = null;
BufferedInputStream bis = null;
HttpURLConnection uc = null;
try
    url = new URL(getBaseQueryUrl() + sb.toString());
    logger.config("URL:Encoded" + getBaseQueryUrl() + sb.toString());
    uc = (HttpURLConnection) url.openConnection();
    uc.setConnectTimeout(URL_TIMEOUT);
    uc.setReadTimeout(URL_TIMEOUT);
    int responseCode = uc.getResponseCode();
    if (responseCode == HttpURLConnection.HTTP_UNAVAILABLE)
        throw new ServerTemporarilyBusyException("Warning Musicbrainz Server Busy:" + uc.getResponseCode());
    if (responseCode != HttpURLConnection.HTTP_OK)
        throw new InvalidMusicBrainzQueryException("Error:" + uc.getResponseCode());
    logger.finest("Receiving results from:" + getBaseQueryUrl() + URLDecoder.decode(sb.toString(), URL_ENCODING_CHARSET));
    bis = new BufferedInputStream(uc.getInputStream());
    JAXBContext jc = JAXBContext.newInstance("com.jthink.jaikoz.manipulate.musicbrainz");
    Unmarshaller um = jc.createUnmarshaller();
    metadata = (Metadata) um.unmarshal(bis);
catch(SocketTimeoutException ste)
          System.out.println(ste);
    throw new NetworkException(Validation.getMsg(Validation.UNABLE_TO_CONNECT_TO_MUSICBRAINZ));
catch (IOException e)
    throw new NetworkException(Validation.getMsg(Validation.UNABLE_TO_CONNECT_TO_MUSICBRAINZ));
catch (JAXBException e)
          throw new InvalidMusicBrainzQueryException("URL:" + url.toString() + " failed");
}thanks Paul

FYI:The code was okay, the problem was due to my firewall, sometimes it wasnt letting responses from the webservice back. Dont know exactly why it was doing this not but chnaging the firewall has solved the issue.

Ibots timing out

We have some reports that take more than a minute to run since they are extracting / aggregating more than 100K rows of data. If we run it on the dashboard the report runs fine within 2 mins. We tried setting up an ibot to run this report inorder to cache the results. But we received an email stating ' the result was canceled'. Looks like the ibot timed out. Is there anyway we can change any setting to allow the report to run and then have it emailed without any error.
Any suggestions.
Thanks.

Hi,
try to change the value of :
<SessionTimeoutSeconds> XXX </SessionTimeoutSeconds>
in the instanceconfig.xml file.
Regards.

Extraction RSA3 timed out

Similar Messages

Maybe you are looking for