Extreme with USB Hard Drive and Backup 3.1 - Slow Connection

Has anyone had any experience with Apple's .Mac Backup 3.1? I have just setup my network with the new Extreme Base Station "N" with my Express being the main base station connected to my cable modem. When I go to use Backup 3.1 to backup my user folder to the wireless external USB hard drive, it takes forever! Is this normal?

RD2516:
That's exactly what I did last night to backup my wife's MacBook Pro home folder (about 45GB). I hooked up the USB drive directly to the laptop and used Backup to make a "full" backup. (This after trying it wirelessly and realizing it would've taken all night).
Then, just for fun, I forced another backup a few minutes later. It was very quick, as expected. It spent a few minutes reading the files (64000 or so) and comparing them, but then did the very small incremental backup in seconds.
So, I think now that I have the biggest part of her home folder backed up, using Backup every night should be pretty easy.
Hope that helps.
jr
Xenon2.6 Mac OS X (10.4.8)

Similar Messages

Airport extreme with USB hard drive permissions problem may be parallels

I cannot access my external hard drive because of some permission problem. I know because I can see this through the disk repair utility. I've attached my external hard drive to my airport extreme. It originally came up well and worked fine. Then it lost connection and now doesn't recognize my password. To confuse matters worse I have parallels installed. This might be where the password problem is as the mac wants to access as a guest and the parallels (windows MX) as my account name. It's all pretty complicated to explain. What I want to do now is just to forget the airport plan and reach my hard drive but it won't boot up even with airport off and a direct firewire connection. It does show up in disk repair utility but with permissions. How can I get to these permissions and drop them. What if they're windows permissions somehow? How can I get started.
Thanks

I have a very similar problem. I have a 2.8 GHz iMac with 2GB RAM and am using OS X v10.5.4, and an Airport Extreme (v7.3.2), both updated to latest firmware. I have a 500 GB TrekStor external HD connected to the AEBS via USB. The TrekStor HD was pre-formatted in FAT32 and is visible on my iMac's desktop and in Finder but I cannot transfer files to it or see files on it. When I drag and drop a file on the TrekStor, it sometimes seems to go well but then the file is not visible via Finder, and sometimes I get an "insufficient privileges" message. I repair permissions on the iMac's internal HD without any change. I am logged in as the admin. All assistance is much appreciated!

AirPort Extreme with USB hard drive

Hi...I have an AirPort Extreme with a Maxtor OneTouch 250MB hard drive attached (via USB port). I have two computers which access the internet and the hard drive through the AirPort.
The first computer is a 1.8 GHz PowerPC G5 (with 3GB of SDRAM). The second is a 2 GHz Intel Core2 Duo IMac (with 4GB of SDRAM).
Both computers have full signal strength via AirPort and both computers have no connection/speed issues with the internet. It's when trying to copy to/from the USB disk that there are problems. The older Mac, the G5, has no problems at all. Great copy speeds in both directions, I can even work off of files on the USB disk without a problem.
The iMac, though, has a problem writing to/from the external hard disk. It connects without a problem, but after that, things come to a standstill.
For example, I can copy a 25MB file from the AirDisk to the G5 in about 15 seconds. If I try to copy the same file to the iMac, it takes as long as 5 minutes. I've tried every setting I can in AirPort Utility, including trying each of the channels individually, and nothing helps. I've disconnected the G5 from the network and that didn't make a difference, either.
Other info...the AirPort firmware is updated to version 7.3.2 and both Macs are updated to System 10.5.4.
If anybody has any advice, I will be eternally grateful.

I have a very similar problem. I have a 2.8 GHz iMac with 2GB RAM and am using OS X v10.5.4, and an Airport Extreme (v7.3.2), both updated to latest firmware. I have a 500 GB TrekStor external HD connected to the AEBS via USB. The TrekStor HD was pre-formatted in FAT32 and is visible on my iMac's desktop and in Finder but I cannot transfer files to it or see files on it. When I drag and drop a file on the TrekStor, it sometimes seems to go well but then the file is not visible via Finder, and sometimes I get an "insufficient privileges" message. I repair permissions on the iMac's internal HD without any change. I am logged in as the admin. All assistance is much appreciated!

I have an air with 64Gb hard drive and 2Gb RAM and would like to upgrade both the HD and RAM. WHat should I buy?

I have an air with 64Gb hard drive and 2Gb RAM and would like to upgrade both the HD and RAM. WHat should I buy?

TWTexas wrote:
WHat should I buy?
compensate or purchase a new Air
Recommend a SUPERSLIM portable 1TB HD
RAM cant be upgraded, as The Fox-man has already said.

Usb hard drive and AirPort Extreme

I have been using an external usb hard drive connected to my Airport Extreme to store music which is then picked up by a Sonos system to play music even when my iMac is switched off - has been working great. However I became aware recently (and I think this pre-dates upgrading my iMac to Mountain Lion) that my external hard drive no longer shows up as a shared drive within Finder. If I go into Airport Utility / Edit / Disks - 'enable file sharing' is checked. Disk Utility doesn't see the drive but I'm not sure that really means anything as a network drive rather than a drive connected directly to the iMac.
Has some recent upgrade disabled network drives on Airport Extreme's (ie assuming we are all now backing up to iCloud so don't need it)?
Thanks

OK, I feel silly on this one.
After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
Hope that helps.

AE extreme dies after connecting USB hard drive and killing it too!!!!!

I finally got around to connecting an external LaCie Rugged hard drive to my AE via the USB port on the back of the AE. Both devices were working properly before I did this. I was intending to activate the drive as a shared drive or a Time Capsule drive. I then opened the Time Machine menu and opened the Preferences menu item and tried to select a backup disk. No disk was found.
Shortly after this step I noticed that the AE light had turned off. I plugged the hard disk into the Mac using a Firewire connection and it was DEAD. Disk Utility will not list the disk. The AE hard boot does not work so it is DEAD too. $400 worth of devices now DEAD and beyond warranty.
Yes I now realize I should not have expected the AE to treat an USB drive as a Time Capsule. Anyone else done this and had the same loss of AE and hard drive?

Hi DP,
The first computer I could actually put my hands on was a DEC PDP8. This was after the punchcard stack era had waned. Booted it up using front panel switches to input binary code to start the tape drives and load the programs. After that came the Data General model that was just as dumb but smaller and noisier. Computers were a pain in the * until I got my first Mac Plus in '86.
Why would a USB hard drive fry the Airport Extreme?
AlphaB

Airport Extreme + shared USB hard drive // Mac + PC Access

We are getting ready to purchase an Airport Extreme for our home network. Here's what we are working with:
1) Airport Extreme
2) MacBook
3) MacMini
4) PC
5) TBD USB hard drive that will be connected to AirPort Extreme *for use as shared hard drive*
From the Apple website, regarding the Airport Extreme "Hard Drive Sharing":
+How does it work? Just connect the external hard drive to the USB port on the back of your AirPort Extreme and — voilà — all the documents, videos, photos, and other files on the drive instantly become available to anyone on the secure network, Mac and PC users alike. It’s perfect for file sharing, collaborative projects, and more.+
Can anyone recommend a specific brand and model USB hard drive that they have experience with in this scenario that was/is used as a shared drive that is accessible from both Macs and PCs?
I ask this question because I have a WD external hard drive that did not play nice - it was either PC or Mac, not both.
Thanks

I have 1-4 and a Seagate FreeAgent Desk drive (not an endorsement, just answering your question), and can access the drive from all of 2-4. How you format the drive and/or what files you store on the drive will affect your ability to access/use those files on the drive from Mac/PC. For example, I can't use my iTunes library stored on the drive from the PC, as it's formatted for Mac. Honestly, I never have accessed the drive from my PC until you asked this question, but it worked!

LaCie d2 195 GB USB hard drive and new iMac

Has anybody had a problem with a LaCie d2 drive that is connected via USB instead of FireWire? I have both types of external hard drives; the FireWire connected LaCie has worked flawlessly, as has a Seagate 300GB FireWire drive. But my poor little LaCie 195 GB USB hard drive bit the dust when I tried to copy my iPhoto library from it to the hard drive of my new iMac Intel Core. The entire Mac froze up, even though there was disk activity on the LaCie. After waiting for 25 minutes for the Mac to unfreeze, I finally manually powered down the system. Unfortunately this corrupted my LaCie disk, and it could not be repaired using Disk Utility. Even when I tried to repartition the drive, Disk Utility simply hung to the point where I had to do a Force Quit to get out of it.
I forgot to mention that I was connecting the LaCie through a powered USB 2.0 hub - that could be a source of the problem, but it worked flawlessly in my iMac G5. I did reconnect it directly to a USB port on the iMac, but still could not get Disk Utility to repartition the drive.
Luckily I had a secondary backup of my photo and music files, or I'd really be crying right now.
Any thoughts?
Thanks,
JD
PowerBook G4 12 Mac OS X (10.4.4)
PowerBook G4 12 Mac OS X (10.4.4)

Mac 1 Ghz G4 1 gig Ram Os 10.4.5
My Firewire connected LaCie Bigdrive started disconnecting spontaneously with a complaint from the iMac that it was disconnected improperly.
Finally it did so once more and has not mounted via FW since. However, USB does mount it but big files take all day to transfer.
I took out the Maxator from the LaCie drive and put it in a FW/USB caddy, ok for a while then the same story. USB only mounting.
Informed with some confidence by a poster on Bombich's website
( http://forums.bombich.com/viewtopic.php?p=25658#25658 ) that it was the boot drive OS
Tried new cable. repaired boot drive disc, repaired permissions, ran DiscWarrior over it, repaired permisssions, ran downloaded 10.4.5 combo, ran DiscWarrior over it and finally repaired permissions again.
No Joy.
i would most appreciate useful suggestions.
Regards and thanks in advance
Anoop in the UK
apollo11
View Public Profile
Send a private message to %1$s
Find More Posts by apollo11
Add apollo11 to Your Buddy List
Reply

What is the Best way to set up Photoshop on a new PC with multiple Hard drives and SSD?

Hi hope someone can help.
I am considering buying a new PC (see below). We want to run both Photoshop and Lightroom on the PC. We will also be using it as a Media centre – that’s why I have two big hard drives.
I would like to know the best way to install both Photoshop and Lightroom on the storage devices. As you can see I will have two 3TB hard drives and one 250G SSD card.
For Photoshop I have read that it can be advantages to have the program on one drive the photos on another drive and the “scratch file’ on a third drive. It was even suggested that the PCs Operating system could be on a different drive than the program. Is this correct and if
so what is best to go on the SSD card? I will be partitioning the Hard Drives and I could even partition the SSD drive if that could help. In this case what size partitions are recommended?
If you can see a component below that you think would be an issue with running Photoshop and Lightroom, could you also let me know what you would recommend?
CPU: Intel Core i7-4790 CPU. LGA1150
Motherboard: Gigabyte GA-Z97M Micro-ATX Motherboard LGA1150
RAM: TWO (2) x Kingston 8GB DDR3 1600Mhz Desktop Memory
HDD: TWO (2) x Seagate Barracuda 3TB 3.5" 7200RPM 64 MB Cache SATA 6.0Gb/s
SSD: Samsung 850 EVO 250GB Internal Solid State Drive (SSD)
Graphics card: Leadtek nVidia Quadro K2200 4GB Graphic Card
Optical drive: LG Blu-Ray Combo Drive. BH16NS40
Power supply unit: Cooler Master V750S ATX Power Supply 750W, 80Plus Gold Certified
Case: Cooler Master Centurion 6Mid Tower Case
Operating system: Microsoft Windows 8.1 Pro 64-bit
Wireless / WiFi: TP-Link TL-WDN4800 900Mbps Wireless-N Dual Band PCI-E Adapter
BTW I would have liked to email this to Adobe support but could not find an email address to send it to. I hope this way works.

That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps.

Trouble with external hard drive and disk repair

So I save my music and photos to an external hard drive. The drive is partitioned to also be the back up for my Time Machine. I live in an old house with the electricity for my MacBook Pro and the external hard drive coming from a wall plug which drapes scrape over when opening and closing, occasionally moving the plugs to the point of cutting off the electricity. Sometimes when that happens, the MacBook Pro won't read the external hard drive and I have to restart the computer for it to read the HD.
Well, this seems to have happened again, only this time it wasn't reading the HD when restarted. I Opened the Disk Utility and did a verify disk, and was told that I couldn't save anything to the drive, but to access the files that were on there. So I attempted to do a disk repair. What happens at that point is instead of getting the solid blue line indicating the repair is happening, I get the barber pole blue line indicating it's trying to access the HD to begin repair. This goes on for hours at a time without the repair taking place.
Can anyone out there give me a "for Dummies" overview of how to get the Disk Utility to repair things?
Thanks.

What I was trying to tell you is that all the music and photos that are on the same drive as your Time Machine backup must also be backed up elsewhere. Unlike all the stuff on your primary (internal) hard drive, those photos and music are not backed up at all unless you have copies of them on a different drive. If your Time Machine hard drive should fail before you do that, they'll all be lost. So copy all the music and photos to your second external hard drive as soon as you are able to do so.
I generally consider the nuisance of backing up extra hard drives to other extra hard drives burdensome and annoying enough so that I always upgrade my primary (internal) hard drive whenever I begin to run short of space on the one I'm using. Now that it's possible to get 750GB and 1TB internal drives for MBPs, I'll get one of those as soon as my present 250GB drive fills up to about 80% of its capacity. I don't want to lug around an external drive in order to have all my stuff with me when I'm away from my home or office — I want it all on my internal drive, and I want to be able to back all of it up at once to an external drive of the same or a larger size. At least until I outgrow a 1TB drive, and I think that will be a while.

Troubles with external hard-drive and iPad

Hi,
First post and all that. Thanks for taking the time to help me out.
I've recently bought my iPad, and while most things work especially well, one issue is really bugging me. The majority of my media is stored on an Iomega 1TB external hard drive, connected via USB to my computer. I'm running Windows XP and iTunes 9.2. When I hook up the iPad to the computer, iTunes loads, starts to sync the iPad with the music from the external HDD and suddenly I get a message saying "the device is not recognised" by the computer. The HDD has dropped off the radar. I've tried different things to get them to talk to each other, but to no avail.
Could someone help me please, to get my precious music off the external HDD? It's bugging me!
Cheers!

Thanks, I'll try connecting the HDD to the front USB ports and the iPad to the back. I did some more digging after posting here (my search-fu is weak!) and found a similar suggestion.
The HDD is indeed independently powered, so I wasn't sure of the power issue, but I'll check it out.
As to more info, the iPod Touch I have doesn't cause the same problems. And I can't transfer the media to the iTunes location, since that's on my first hard drive and I don't have enough space (hence the external one! :oD)
Cheers all!

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

W520 Replace DVD with another Hard Drive and IEEE 1394 spec for music recording

To increase the performance, I am taking the 160 GB SSD instead of the mechanical drive. Obviouslt, I need more space than this. I don't care about the DVD rom. It can't play blu ray anyway. Is it possible to replace the dvd drive with a hard drive? Where can I get a replaceable drive for this? What do I do with the DVD? Can I sell it back?
I need to do music recording with this. I was wondering about the IEEE 1394 spec; the latency etc. If I remember correctly the W510 IEEE1394 was very good, probably was manufactured by Texas Instruments. I could not find anything about it anywhere. Not even here: http://www.lenovo.com/psref/pdf/tabook.pdf
Also, a bit worried about the sound card. How good is it? Did anyone use this laptop for music recording?

hey udvranto,
with regard to this, i would suggest contacting tech support via the number listed in the link below to check if it is possible to replace the dvd with your harddrive.
http://www.lenovo.com/contact/us/en/
on the part of the soundcard, I believe it is good for music recording. Though this really depends on the software that you're going to use to record.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Mediasmart software problem loading onto computer with new hard drive and operating system

My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?

waynesworld57 wrote:
My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?
Hi,
It looks like it's a common issue: http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks-Reply-Only/HP-Mediasmart-Software-package-for-Wi...
Try VLC as a multimedia player: http://www.videolan.org/vlc/download-windows.html
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Extreme with USB Hard Drive and Backup 3.1 - Slow Connection

Similar Messages

Maybe you are looking for