EzVPN or L2L - which is more appropriate?

I am in the process of desiging a solution to connect approximately 20 teleworkers to our network for the purposes of working from home. The remote users will have some form of broadband connection (cable or DSL). We have both a VPN3030 and a PIX515e(v7) in our inventory to use as the head end device. My hope is to use the 3030 since it is already in use for L2L and VPNC connections. I have an 871 router in house for testing, it seems like a good choice for the job. My questions are this:
1. Is the 871 the right device for the job? If not, what is?
2. Since the broadband connections will have dynamic IP addresses what is the most appropriate VPN type L2L or EZ?
Any advice will be appreciated. Thanks in advance,
Mike

Not sure how the LAN-to-LAN users connect currently on the VPNC. How many users do you have behind the 871 ? If it is one user, then i think the Ezvpn should do, more than 3 or 4 users you can look at a L2L

Similar Messages

  • Which HDD More Appropriate?

    Hi,
    I'm about to buy the MacBook Pro 2Ghz but was wandering if there would be a big advantage to buying the model with the faster HDD?
    I will be using MS Office (Word mostly), Adobe Photoshop CS2 and the Internet.
    MacBook Pro   Other OS  

    Owning a portable over a desktop offers great advantages but one must accept concessions in terms of overall performance. Granted, files are larger these days especially with running two separate load-sets within Mac Intel machines. I opted for increased speed of the 7200 as it does access files a bit faster than the 5400. I wanted to have every possible edge where performance is concerned. If you want additional storage, consider “on the go” external options such a 4gb flash drive or external HD. Please mark this post as “helpful”, etc. if it applies.
    Regards,
    2.16 GHz MacBook Pro (W8612...), Dell 620 WorkStation (XP Pro)   Mac OS X (10.4.6)   G4 Tower (OS 9/10), Dell 620 WorkStation (XP Pro), Gateway P4 (XP Home)

  • Which is more useful in include directive and taglibraries

              I am writing some static html tags inside a file.
              This files i need to call from jsp pages.
              one is i can call using include directive.
              other is writing taglibraries.
              Performance and optimization wise which is more appropriate?
              

    There is an include directive and a jsp:include tag. I would suggest that
              performance differences between these are nominal, with the directive being
              slightly faster due to its "inlining nature".
              Don't write your own tags to do this unless you have to. That would be
              silly.
              Peace,
              Cameron Purdy
              Tangosol, Inc.
              http://www.tangosol.com
              +1.617.623.5782
              WebLogic Consulting Available
              "Raaj" <[email protected]> wrote in message
              news:3af02b63$[email protected]..
              >
              > I am writing some static html tags inside a file.
              > This files i need to call from jsp pages.
              > one is i can call using include directive.
              > other is writing taglibraries.
              > Performance and optimization wise which is more appropriate?
              >
              

  • What SAP module is more appropriate for my background?

    HI,
    I'm very interested to join a SAP course in India but i'm really not making any decision so far. which module is more suitable for me and my background.
    I have done my Master in "computer science" and my undergrad in "Education in computer". I've asked some guys and some have advised me to go for Basis or BI. I'm telling you that I have no experience in SAP world but I'll take a step further to join the most appropriate course that meets my background.
    my Questions are:
    - Any requirements to study SAP Basis/BI module in an authorized institute?
    - What do u suggest me to study?
    plz share your experience :):):)

    BTW, I'd like to get some advices about my situation:
    i'm interested to enter into SAP world but i duno which way is more appropriate for me:
    1- join a course in a non-authorized institute in India for about 2 months (2 h/day) then join SIEMENS institute (8 h/day) which is authorized then do the exam to be a SAP certified consultant. [a long way, total of studying is 3 months, will cost a bit more]
    2-  join a course in SIEMENS institute then do the exam to be a SAP certified consultant. [short period .. just 1 month, intensive]
    Things to bear in mind:
    - no experience in SAP world.
    - the aim of studying in a non-authorized institute is to enter into SAP world and make sure if the module is suitable for u or need to switch to another one. studying in a non-institute is a bit cheap.
    what do u recommend me to do?
    cheers,

  • How can i join more than 20 tables which contains more than 5 lacks records

    how can i join more than 20 tables which contains more than 5 lacks records

    If you're trying to join 20 tables I would check:
    - Are all the joins necessary. It's easy sometimes to just join to another table because you're unsure as to whether it's required.
    - What sort of application is it? 20 joins seems a lot to me. Are you trying to achieve too much with one query? Is it possible to break the problem down?
    - If it is necessary to join so many tables then force the use of hash joins in the query, especially if you're processing a lot of data and want the best throughput. If you want a quicker response, this will not be a appropriate.

  • Absolutely the WORST customer service!!! Customer disservice is more Absolutely the WORST customer service!!! Customer disservice is more appropriate! Bring back support to the U.S.!! Bring back support to the U.S.!

    Absolutely the WORST customer service!!! Customer disservice is more appropriate! Bring back support to the U.S.!

    Hi richmc. I will only deal with the last part of your message.
    You say that you want to use Outlook 2007 to collect your mail. That is not a problem, it is just an email client. BT do not supply this email client. Microsoft do.
    You cannot expect BT to be able to assist customers with all the different email clients available to use. You can get the server details etc to set it up yourself.
    Most ISP's are the same on support issues for things that they do not supply.
    BT do have a paid support service if you did want to use it but for things like email setup it should not be needed.
    You also say that you have your own domain names. These NEED to be hosted somewhere to be able to use them for email.
    I don't believe that BT do hosting anymore(Could be wrong). So you would need to get in touch with a hosting company, someone like Nethosting, 1&1, GoDaddy etc to set up an email hosting account and then set up your email client to your hosting companies email servers.
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

    First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn.  I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

    Final Cut is a separate, higher end video editor.  The pro version of iMovie.
    Give iPhoto a look at for creating the slideshow.  It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them.  You can select from various themes and transitions between slides and add music from your iTunes library.
    When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
    Save the resulting Quicktime movie file in your Movies folder.
    Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
    Then follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version).  Personal preferences showing here.

  • Implicit Join or Explicit Join...which is more efficient???

    Which is more efficient?
    An IMPLICIT JOIN
    SELECT TableA.ColumnA1,
    TableB.ColumnB2
    FROM TableA,
    TableB
    WHERE TableA.ColumnA1 = TableB.ColumnB1
    Or....An EXPLICIT JOIN
    SELECT TableA.ColumnA1,
    TableB.ColumnB2
    FROM TableA
    INNER JOIN TableB
    ON TableA.ColumnA1 = TableB.ColumnB1
    I have to write a pretty extensive query and there will be many parts and I just want to try and make sure it is efficient as possible. Can I EXPLAIN this in SQL Navigator as well to find out???
    Thanks in advance for your review and hopeful for a reply.
    PSULionRP

    Alex Nuijten wrote:
    The Partition Outer Join is very handy, but it's an Oracle-ism - Not ANSI ...Ooh, "New thing learnt today" - check.
    but then again who cares? ;)Oracle roolz! *{;-D                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Issue in FF v 3.6.10: I have a page which have more than 20 link, clicking on these link opens up a popup using window.showModalDialog, for the first 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open.

    Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • I have a MacBook Air and whenever i edit in imovie which is more than 30 second it just doesn't respond.

    Hi, whenever i make a movie in my Macbook air which is more than 30 second and play it imovie doesn't respond. Please tell me what can i do.

    Hey samwise_lotr,
    Thanks for using Apple Support Communities.
    Start the computer in safe mode and see if iMovie opens. If it works you may want to remove unnecessary login items.
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/ht1564
    OS X Mavericks: If you think you have incompatible login items
    http://support.apple.com/kb/PH14201
    Have a nice day,
    Mario

  • How to find tables which has more than 1000 Partitions

    Hi All,
    Is there any other way to find out the tables which has more than 1000 Partitions ?
    Apart from SAP report RSDD_MSSQL_CUBEANALYZE. Because this report is not working for me as job getting cancel again and again with ABAP dump DBIF_DSQL2_SQL.I already check SAP Note 1309838, but itu2019s not applicable for us because we are on highest support package level SAP_BW 701 SP06.
    Thanks,
    Harshal

    If you are running SQL Server as your database platform run this query:
    select o.object_id,o.name,p.Partition_count from sys.objects o
    inner join
    (select object_id,count(distinct partition_number) as Partition_count
    from sys.partitions
    group by object_id)
    p
    on o.object_id = p.object_id
    where o.type = 'U'
    order by p.Partition_count desc

  • Update query which taking more time

    Hi
    I am running an update query which takeing more time any help to run this fast.
    update arm538e_tmp t
    set t.qtr5 =(select (sum(nvl(m.net_sales_value,0))/1000) from mnthly_sales_actvty m
    where m.vndr#=t.vndr#
    and m.cust_type_cd=t.cust_type
    and m.cust_type_cd<>13
    and m.yymm between 201301 and 201303
    group by m.vndr#,m.cust_type_cd;
    help will be appreciable
    thank you
    Edited by: 960991 on Apr 16, 2013 7:11 AM

    960991 wrote:
    Hi
    I am running an update query which takeing more time any help to run this fast.
    update arm538e_tmp t
    set t.qtr5 =(select (sum(nvl(m.net_sales_value,0))/1000) from mnthly_sales_actvty m
    where m.vndr#=t.vndr#
    and m.cust_type_cd=t.cust_type
    and m.cust_type_cd13
    and m.yymm between 201301 and 201303
    group by m.vndr#,m.cust_type_cd;
    help will be appreciable
    thank youUpdates with subqueries can be slow. Get an execution plan for the update to see what SQL is doing.
    Some things to look at ...
    1. Are you sure you posted the right SQL? I could not "balance" the parenthesis - 4 "(" and 3 ")"
    2. Unnecessary "(" ")" in the subquery "(sum" are confusing
    3. Updates with subqueries can be slow. The tqtr5 value seems to evaluate to a constant. You might improve performance by computing the value beforehand and using a variable instead of the subquery
    4. Subquery appears to be correlated - good! Make sure the subquery is properly indexed if it reads < 20% of the rows in the table (this figure depends on the version of Oracle)
    5. Is tqtr5 part of an index? It is a bad idea to update indexed columns

  • I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

    I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

    I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?

  • I have an iphone  4 8gig there is 2.4 gig of "other" showing on my usage which is more than all oter data on the phone.  What is it and how do I delete some to clear space?

    I have an iphone 4 8gig there is 2.4 gig of "other" showing on my usage which is more than all other data on the phone.  What is it and how do I delete some to clear space?

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • Which driver more stable???

    which driver more stable???
    before i used msi cd (default driver 84.66),but i find got problem ,the system suddenly restart,any one got this problem or not??
    now i using 91.33 is ok....any one got other driver or can suggest a good driver for me ,plz..
    thanks...
    and nforce driver ,which is stable ??ver 7.13 or 7.15??can i used nforce 570,or 590 SLI intel edition or not???
    thanks

    from my experiance with 7900GTX , the nvidia's 9x.xx series is a piece of crap, I am using 84.21 which gives me 15% more FPS than 91.33.. 
    Regarding the PC restart issue.. it might not be the driver problem, it could be a heat problem or even a small screw hanging in your PC case can cause a short circut & for the system to sudden restart (It happend to me once)..
    Have a nice day...

Maybe you are looking for