F.18 Balance Confirmation: Print, Send E--Mail and Send FAX in same time ??

Hi Experts,
In T-Code F.18 we can Print or Send Email or Send FAX to vendor.
To do this, we specified a custom Function Module in FIBF. This function module decides which way the document will be sent. And i set decision mechanism with Vendor Default Communication Type (ADRC-DEFLT_COMM).
But in this way, we can just Print or just send Email or just FAX or etc.
Is it possible to run F.18 with multiple communication methods ?

Hi,
Cay you Just Explain me that how you can send the mail to Vendor from F.18
(Balance Confirmation) transaction Code ...
i am very much thank full to you if you give me the solution.
thanks
Devang

Similar Messages

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

When away from home on vaction can I send e-mail and photo and print them out after I get home?

I tried to print my e-mail I send from and photo when I was on vacation but it didn't work. Does the printer have to be on the whole time from this to work? It not saved on hp server someplace? The t.v. makes it sound so easy to do!!!!
That one reason I got it!!!

Hi,
The printer does need to be turned on for them to print. If you turn it off the printer will not print the pictures and the eprint server will only keep the prints for 24 hours. The unit has a sleep mode for this very reason
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

How can scripts and smart forms send to mail and pdf?

HI i want to know how script and smartforms will send to mail and pdf formates>?

Dear Anees ,
Pleas pass on the parameter in itcpo - (getotf ) structure while calling OPEN_FORM as 'X' .
I have answered it in detail in your earlier post .
also giving below sample program for sending SAPSCRIPT as PDFattachment in email :
REPORT zsapscript_pdf_via_mail MESSAGE-ID zvele LINE-SIZE 68
NO STANDARD PAGE HEADING.
TABLES: itcpo.
Open your usual sapscript specifying that the output will be OTF
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
dialog = ''
form = '............'
language = sy-langu
options = itcpo
EXCEPTIONS
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
OTHERS = 6.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
window = '............'
element = '............'
EXCEPTIONS
window = 1
element = 2.
DATA: BEGIN OF t_otfdata OCCURS 0.
INCLUDE STRUCTURE itcoo.
DATA: END OF t_otfdata.
Closing the Sapscript, we save data (OTF) in a table
CALL FUNCTION 'CLOSE_FORM'
TABLES
otfdata = t_otfdata
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
OTHERS = 5.
DATA: len_in LIKE sood-objlen,
len_out LIKE sood-objlen.
DATA: BEGIN OF t_pdfdata OCCURS 0.
INCLUDE STRUCTURE solisti1.
DATA: END OF t_pdfdata.
DATA: BEGIN OF t_otfdata2 OCCURS 0.
INCLUDE STRUCTURE solisti1.
DATA: END OF t_otfdata2.
Move OTF data to another table with lenght 255
LOOP AT t_otfdata.
CONCATENATE t_otfdata-tdprintcom t_otfdata-tdprintpar INTO t_otfdata2.
APPEND t_otfdata2.
ENDLOOP.
Convert OTF format to PDF
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
format_src = 'OTF'
format_dst = 'PDF'
devtype = 'PRINTER'
FUNCPARA =
len_in = len_in
IMPORTING
len_out = len_out
TABLES
content_in = t_otfdata2
content_out = t_pdfdata
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
Download on local directory
*CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = len_out
FILENAME = 'c:\test.pdf'
FILETYPE = 'BIN'
TABLES
data_tab = t_pdfdata.
Mail settings
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINe.
DATA: doc_chng LIKE sodocchgi1.
DATA righe_attachment TYPE i.
DATA righe_testo TYPE i.
DATA z_email(80) TYPE c.
Receivers parameters
SELECT-OPTIONS: s_email FOR z_email LOWER CASE NO INTERVALS.
PARAMETERS rec_type LIKE reclist-rec_type
DEFAULT 'U'. " type of sending address
CLEAR: reclist, reclist[],
objhead, objhead[],
objtxt, objtxt[],
objbin, objbin[],
objpack, objpack[].
Attachment filling
LOOP AT t_pdfdata.
objbin-line = t_pdfdata.
APPEND objbin.
ENDLOOP.
DESCRIBE TABLE objbin LINES righe_attachment.
Text filling
objtxt = 'Testo della Mail - Riga 1'.APPEND objtxt.
objtxt = 'Testo della Mail - Riga 2'.APPEND objtxt.
objtxt = 'Testo della Mail - Riga n'.APPEND objtxt.
DESCRIBE TABLE objtxt LINES righe_testo.
Other filling
doc_chng-obj_name = 'URGENT'.
doc_chng-expiry_dat = sy-datum + 10.
doc_chng-obj_descr = 'Prova invio Mail con PDF'.
doc_chng-sensitivty = 'O'.
doc_chng-doc_size = righe_testo * 255.
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = righe_testo.
objpack-doc_type = 'RAW'.
APPEND objpack.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = righe_attachment.
objpack-doc_type = 'PDF'.
objpack-obj_name = 'TEST'.
objpack-obj_descr = 'File.pdf'.
objpack-doc_size = righe_attachment * 255.
APPEND objpack.
Receivers filling
LOOP AT s_email WHERE sign = 'I'
AND option = 'EQ'
AND NOT ( low IS initial ).
CLEAR reclist.
IF sy-tabix > 1.
reclist-copy = 'X'.
ENDIF.
reclist-receiver = s_email-low.
IF rec_type IS INITIAL.
reclist-rec_type = 'U'. " Internet e-mail
ELSE.
reclist-rec_type = rec_type.
ENDIF.
reclist-notif_del = 'X'. " request delivery notification
reclist-notif_ndel = 'X'. " request not delivered notification
APPEND reclist.
ENDLOOP.
Mail Send
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
put_in_outbox = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
OBJECT_PARA =
OBJECT_PARB =
receivers = reclist
CONTENTS_HEX =
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7

Trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

How to send automatic mail and put attache file on batch file ?

how to send automatic mail and put attache file on batch file ?
START MAILTO:[email protected]?SUBJECT=PHONE%CALL^&BODY=Testing

Hi,
Do you want to use a batch file to create new email message (including recipients, subject and email body) with attachments? If so, I'd recommend you post your question in the Scripting Guys forum for further assistance:
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Please feel free to let me know if I've misunderstood something.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Send a mail to the vendor at the time of approval with the attachment of PO

Hi all,
I want to send a mail to the vendor at the time of approval by attaching the pdf of that particular PO.
How can I achieve this?
I know the User Exit where the code should be written.
But I want the solution for attaching the PDF of PO at the time of approval.
Please help me in this regard.
Edited by: vinil kumar aturi on Mar 16, 2009 7:52 AM

Hi,
Try Following Code to Send mail as PDF Attachment
In this
Smart form Name : ZSMART_MM_003
This will send mail to EMAIL ADDRESS SPECIFIED IN VENDOR MASTER FK03
This code is written for ME23n so we used nast-objky(10) for purchase order no you may replace it with your purchase order no
and smart form name with your smart form name
*-- Send Mail---
*-- Function Module Call to get Customer Address (Email)--
DATA: VENDOR TYPE ELIFN,
      ADDRNO TYPE ADRNR.
DATA: atab-mail TYPE STRING.
SELECT SINGLE LIFNR FROM EKKO INTO VENDOR WHERE EBELN = nast-objky(10).
SELECT SINGLE ADRNR FROM LFA1 INTO ADDRNO WHERE LIFNR = VENDOR.
TYPE-POOLS: szadr.
DATA adr_kompl TYPE szadr_addr1_complete.
DATA adr1 TYPE szadr_addr1_line.
DATA adtel TYPE szadr_adtel_line.
DATA admail TYPE szadr_adsmtp_line.
DATA adfax TYPE szadr_adfax_line.
CALL FUNCTION 'ADDR_GET_COMPLETE'
       EXPORTING
            addrnumber              = ADDRNO
       IMPORTING
            addr1_complete          = adr_kompl
       EXCEPTIONS
            parameter_error         = 1
            address_not_exist       = 2
            internal_error          = 3
            wrong_access_to_archive = 4
            OTHERS                  = 5.
Mail
LOOP AT adr_kompl-adsmtp_tab INTO admail.
    MOVE admail-adsmtp-smtp_addr TO atab-mail.
ENDLOOP.
if sy-subrc = 0.
DATA: FILENAME TYPE STRING.
CONCATENATE 'PurchaseOrder' nast-objky INTO FILENAME SEPARATED BY '-'.
DATA: MESSAGELINE1 TYPE STRING,
        MESSAGELINE2 TYPE STRING.
CONCATENATE 'Do you want to send ' FILENAME ' through E-mail to' into MESSAGELINE1.
CONCATENATE atab-mail '?' into MESSAGELINE2.
data: answer    TYPE c.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
       EXPORTING
            defaultoption = 'N'
            textline1     = MESSAGELINE1
            textline2     = MESSAGELINE2
            titel         = ' '
            start_column = 35
            start_row     = 10
       IMPORTING
            answer        = answer.
IF answer EQ 'J' OR answer EQ 'Y'.
Code to find Contact person
    DATA: CONTACT TYPE EVERK.
    SELECT SINGLE VERKF FROM EKKO INTO CONTACT WHERE EBELN = nast-objky(10).
Internal Table declarations
    DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
          I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
          I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
          I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
          I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
          I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
          WA_OBJHEAD TYPE SOLI_TAB,
          W_CTRLOP TYPE SSFCTRLOP,
          W_COMPOP TYPE SSFCOMPOP,
          W_RETURN TYPE SSFCRESCL,
          WA_DOC_CHNG TYPE SODOCCHGI1,
          W_DATA TYPE SODOCCHGI1,
          WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
          V_FORM_NAME TYPE RS38L_FNAM,
          V_LEN_IN LIKE SOOD-OBJLEN,
          V_LEN_OUT LIKE SOOD-OBJLEN,
          V_LEN_OUTN TYPE I,
          V_LINES_TXT TYPE I,
          V_LINES_BIN TYPE I.
          DATA : s_control_parameters TYPE ssfctrlop,
                  s_output_options     TYPE ssfcompop.
                  s_control_parameters-getotf = 'X'.
                  s_control_parameters-no_dialog = 'X'.
                  s_control_parameters-preview   = 'X'.
                  s_output_options-tdnoprint = 'X'.
                  s_output_options-tdimmed   = ''.
                  s_output_options-tddest = 'LP01'.        "Spool: Output device
                  s_output_options-tdreceiver = sy-uname.
                  s_output_options-tdcover = ''.
         CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
         EXPORTING
            FORMNAME = 'ZSMART_MM_003'
         IMPORTING
           FM_NAME = V_FORM_NAME
         EXCEPTIONS
           NO_FORM = 1
           NO_FUNCTION_MODULE = 2
           OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
         W_CTRLOP-GETOTF = 'X'.
         W_CTRLOP-NO_DIALOG = 'X'.
         W_COMPOP-TDNOPREV = 'X'.
         CALL FUNCTION V_FORM_NAME
         EXPORTING
            CONTROL_PARAMETERS = s_control_parameters
            OUTPUT_OPTIONS = s_output_options
            USER_SETTINGS = ''
            nast          = nast
            WA_ADDRESS    = WA_ADDRESS
         IMPORTING
            JOB_OUTPUT_INFO = W_RETURN
         TABLES
            addtel = it_addtel
            addsmtp = it_addsmtp
         EXCEPTIONS
            FORMATTING_ERROR = 1
            INTERNAL_ERROR = 2
            SEND_ERROR = 3
            USER_CANCELED = 4
            OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Convert SMartform to pdf
      I_OTF[] = W_RETURN-OTFDATA[].
      CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        FORMAT = 'PDF'
        MAX_LINEWIDTH = 132
      IMPORTING
        BIN_FILESIZE = V_LEN_IN
      TABLES
        OTF = I_OTF
        LINES = I_TLINE
      EXCEPTIONS
       ERR_MAX_LINEWIDTH = 1
       ERR_FORMAT = 2
       ERR_CONV_NOT_POSSIBLE = 3
       OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
      LOOP AT I_TLINE.
        TRANSLATE I_TLINE USING '~'.
        CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
        ENDLOOP.
        TRANSLATE WA_BUFFER USING '~'.
        DO.
          I_RECORD = WA_BUFFER.
          APPEND I_RECORD.
          SHIFT WA_BUFFER LEFT BY 255 PLACES.
          IF WA_BUFFER IS INITIAL.
            EXIT.
            ENDIF.
            ENDDO.
Attachment
            REFRESH: I_RECLIST,
            I_OBJTXT,
            I_OBJBIN,
            I_OBJPACK.
            CLEAR WA_OBJHEAD.
            I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
            I_OBJTXT = 'Sir, '.
            APPEND I_OBJTXT.
            I_OBJTXT = ''.
            APPEND I_OBJTXT.
            I_OBJTXT = 'Please Find Attached '.
            APPEND I_OBJTXT.
            I_OBJTXT = FILENAME.
            APPEND I_OBJTXT.
            I_OBJTXT = 'For your reference'.
            APPEND I_OBJTXT.
            I_OBJTXT = ''.
            APPEND I_OBJTXT.
            I_OBJTXT = 'Regards'.
            APPEND I_OBJTXT.
            I_OBJTXT = CONTACT.
            APPEND I_OBJTXT.
*Mail Subject
            DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
            READ TABLE I_OBJTXT INDEX V_LINES_TXT.
            WA_DOC_CHNG-OBJ_NAME = 'Purchase Order'.
            WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
            WA_DOC_CHNG-OBJ_DESCR = 'Purchase Order'.
            WA_DOC_CHNG-SENSITIVTY = 'F'.
            WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
            CLEAR I_OBJPACK-TRANSF_BIN.
            I_OBJPACK-HEAD_START = 1.
            I_OBJPACK-HEAD_NUM = 0.
            I_OBJPACK-BODY_START = 1.
            I_OBJPACK-BODY_NUM = V_LINES_TXT.
            I_OBJPACK-DOC_TYPE = 'RAW'.
            APPEND I_OBJPACK.
Attachment (pdf-Attachment)
            I_OBJPACK-TRANSF_BIN = 'X'.
            I_OBJPACK-HEAD_START = 1.
            I_OBJPACK-HEAD_NUM = 0.
            I_OBJPACK-BODY_START = 1.
            DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
            READ TABLE I_OBJBIN INDEX V_LINES_BIN.
            I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
            I_OBJPACK-BODY_NUM = V_LINES_BIN.
            I_OBJPACK-DOC_TYPE = 'PDF'.
            I_OBJPACK-OBJ_NAME = 'smart'.
            I_OBJPACK-OBJ_DESCR = FILENAME.
            APPEND I_OBJPACK.
            CLEAR I_RECLIST.
            I_RECLIST-RECEIVER = atab-mail.
            I_RECLIST-REC_TYPE = 'U'.
            APPEND I_RECLIST.
            CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
            EXPORTING
              DOCUMENT_DATA = WA_DOC_CHNG
              PUT_IN_OUTBOX = 'X'
              COMMIT_WORK = 'X'
            TABLES
                PACKING_LIST = I_OBJPACK
                OBJECT_HEADER = WA_OBJHEAD
                CONTENTS_BIN = I_OBJBIN
                CONTENTS_TXT = I_OBJTXT
                RECEIVERS = I_RECLIST
            EXCEPTIONS
                TOO_MANY_RECEIVERS = 1
                DOCUMENT_NOT_SENT = 2
                DOCUMENT_TYPE_NOT_EXIST = 3
                OPERATION_NO_AUTHORIZATION = 4
                PARAMETER_ERROR = 5
                X_ERROR = 6
                ENQUEUE_ERROR = 7
                OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
Regards
Nausal

HT4864 I have huge and returning problems with iCloud. I cannot send e.mails and there is nothing wrong with my settings. It started yesterday. Does anyone no the reason?

What is wrong with Apple. This is the third time during autumn, that I experience problems with icloud. Apparently yesterday once again there was an outage with icloud and the problem was solved, but NO it is not solved. I still can not send e.mails and I am probably not the only one. Each time I talk to a technician from Apple, the only thing they do is to uninstall my icloud and reinstall it again. With no results. A waste of time. Please make your system work and give a better support. Who do I call to get a proper assistance???
And why can I not select icloud under my products??

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

My iphone 4 wont send picture mail and my mms in on

my iphone 4 wont send picture mail and my mms in on

Are you trying to send the pic with Messages or Mail?
If it's with Messages, this Apple doc might help ya out -> iOS: Troubleshooting Messages
If it's with Mail, you may have to try another email provider or connecting to the Internet over another network.

I am trying to copy an e-mail and send it to pages

I am very new to mac. I am trying to copy and e-mail and send it to pages to edit. How do I do that?

Select the the text in your email (Edit > Select All
copy it (Edit > Copy)
start Pages
create a new document (File > New)
paste the text from the email into the new Pages document (Edit > Paste)

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Welcome to Apple Communities
Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

is this a windows in bootcamp question ?

Why Can't see RFC Sender communicaiton channels and Sender Agreenment

Why Can't see RFC Sender communicaiton channels and Sender Agreenment,
but other type communicaiton channels is ok.

hi
If the sender is R/3 then it has connection directly through RFCs .
XI system can understand HTTP procal directly without any communication channel.
It is the same case for both sender R/3 RFCand IDOC adapters.
more over u can registered to IMPORTS permitted for RFCs and IDOCs while creating the name space as WEB AS ABAP.
regards
sreeni

Doubt about difference between "Send to sap" and "Send EWA Alerts to SAP"

Hello All
I hope that you can help me is juts a doubt about 2 check boxes
I'm on setup of a EWA but when i´m on the configuration (dates, transfers ewa to sap, archiving of EWA etc) i see 2 check boxes
that i don't know what is the difference
The path is the following
Tcode = DSWP --> Select the solution --> (the left column) Operations Setup --> Solution Monitoring --> EarlyWatch Alert --> Setup EarlyWatch Alert
Could you tell me what is the difference between "Send to SAP" and "Send EWA alerts to SAP" boxes?
Thanks and have a nice day

Hello Cherios,
The "Send to SAP" check box is used when you want to sent a Production or Test (Quality) systems EWA data to SAP for analysis.
Currently the "Send EWA Alerts to SAP" is not used at this time, and actually cannot be selected, and saved.
There should now be no doubt about the two check box fields .
Hope this information is helpful.
Regards,
Paul

F.18 Balance Confirmation: Print, Send E--Mail and Send FAX in same time ??

Similar Messages

Maybe you are looking for