F110 - Bill of exchange - latest due date more than 999 days ?

Hi all:
We have a problem about Payment run / F110.
Because finance department want to open "Check" to bank and the due date is about 4 years later (1500 Days).
And we run the payment run it shows error message " FZ 732 Item not due in 000 - 999 days " .
I think the reason is because the maxium latest due date only allowed 999 days,right ??
"Latest due date in" of "Bill of exchange due date for outgoing payments" in paying Company Code (OBVS)
Is there any way ( IMG / Exit / Enhancement ) can resolve this problem ??
thanks a lot.

Hi Mauri:
Thanks your reply.
actually, we have asked user to open their check - more then 999 days - manually.
Because this is the second case we met in past 6 months, so we are looking for any solution ( Exit / Enhancement ) to meet user's requirement.
We won't create any new add-on program to meet user's requirement, but hope exit or enhancement can make it, anyway, thanks again.

Similar Messages

Aprroval for Invoice have due date greater than 100 days

Hi all!
I would like to create query to approve for Invoice have due date greater than 100 days.
SELECT 'true' from OINV where max(datediff(day, OINV.docduedate, getdate()))>100 and OINV.docstatus ='O' and cardcode = $[$4.0.0] group by cardcode
It's not working. Can you help me!
Thanks!

Hi Tien,
Hopefully not trying to teach you how to suck eggs here, but it looks like the query is doing too much. There shouldn't be a need to perform a "GROUP BY" in a query to dictate if an approval is to be triggered or not, only the criterai to make it happen.
For examle, the following code will send a transaction for approval if the customers code equals a specific reference.....
SELECT 'TRUE' FROM ORDR T0 WHERE ${ORDR.CardCode} = 'ABC001'
If you're wanting a query to just return a boolean answer based on the date criteria, you might want to try adapting your query to something like.......
SELECT 'true' from OINV where max(datediff(day, ${OINV.docduedate}, getdate()))>100 and ${OINV.docstatus} ='O' and cardcode = ${$4.0.0}
(As an additional tip, in order to test a query that you're wanting to use as either a formatted search or approval type selection, when in the transaction, if you locate the relevant saved query under "Tools > Queries > User Queries" etc, where you have references to specific fields e.g. ${ORDR.CardCode}, this will pick up the values from the current record and give you a what if scenario. I tend to have just a "Temp" query I use for WIP type queries of this nature.)
Note - You need to replace the bracket's "{}" with square ones, I've used the others as the forum posts as a http reference.
Hope this helps!
Julian

F110 bill of exchange: error FZ731 "...requires payment before due date"

Hi everybody.
I'm facing an issue that is driving me crazy <:-)
I want to configure a payment method of type "bill of exchange" (in Spain, "pagaré"). I have several due invoices (due dates: 30/11/10, 31/12/10...), which have this payment method. Some other items are not yet due (30/1/11).
When carrying out a payment run thru transaction F110, the system asks for the bill of exchange issue date, which I have populated as 30/11/10. At another tests, I have populated as 10/1/11.
When running F110, the vendor items are then classified as exceptions, with error FZ731 "Pymt method I in the item requires payment by b./exch. before due date", and also message FZ732 "Item not due in 000 - 000 days".
I think this problem may be motived because the definition of the payment method "I" (company code data) says: Days until due date: 0. But this field is not updatable.
I've searched the message numbers in the forums, but found no answer.
Anybody can help? Kind regards,
Alvaro

Never mind, I just had to update the Paying company code, fields Bill of exchange due date... > Earliest-lates due date in...days.
Regards.

Archiving same data more than once due to overlapping variant values

Hi all,
i had accidently run 2 archiving jobs on the same data. For instance, job 1 was archiving for company code IN ( where the company code was from IN00 till ZZ00), which was the unwanted job. The second archive job archived data from IN99 till INZZ ( not the whole IN company code ).
These 2 jobs failed due to log fulll ( the data was too huge to be archived), however when i expand the jobs in the failed SARA session, the archive files has up to 100 MB size.
Below are some of the problems which will incur if we archive the same data more than once ( which i found from my online search )
- some archiving objects require that data only exists once in the archive therefore duplicate data can lead to erroneous results in the totals of archived data
- Archiving the data again will affect checksum. Checksum normally conducted before and after archiving process and its purpose is to validate whether the same file contents exist in the newly created archive files as compare the original data.
Could anyone advice me on how to overcome this multiple archiving on the same data issue. Apart from above stated impact, what are the other problems of multiple archiving on same data?
The failed archived sessions are currently in "Incomplete Archiving Session" and in 1 week time they will be deleted by archive delete jobs and will be moved to "Completed Archive Session". I highly appreciate if anyone could help
Source of finding:
http://help.sap.com/saphelp_nw73/helpdata/en/4d/8c7890910b154ee10000000a42189e/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/8d/3e4fc6462a11d189000000e8323d3a/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/8d/3e4fc6462a11d189000000e8323d3a/content.htm

Hello,
There are several issues here. In this case it seems pretty clear cut that you did not want the first variant to be executed. Hopefully none of the deletions have taken place for this archive run.
In cases where you have overlapping selection criteria and some of the deletions have been processed you can be in a very difficult situation. The best advise that I have would be to check your archive info structure CATALOG definition and make sure that both the archive file and the offset fields are set to DISPLAY fields and not KEY fields.
If your file and offset are key fields then when you use the archive info structure you would pull up more than one copy of the archived document.
Example: FI document 12345 was archived and deleted in archive run 1 and archive run 2.
The search for the archive info structure when the file and offset are keys fields would return two results.
12345 from run 1
12345 from run 2
If the CATALOG has the file and offset as display only fields you would only return one result
12345 from (whichever deletion file was processed first)
The second deletion process would have a warning message in the job log that not all records were inserted.
Please note that any direct access of the data archive file that bypasses the archive info structure and goes directly to the data archiving files would still show two documents and not a single document.
Regards,
Kirby Arnold

Calculation of due date based on Business Days for FICA documents

Hi All,
I am working on project where SD - FICA integration is in picture. We post some charges through SD and FICA document gets posted on relevant Contract Account.
Normally we create Sales Order using transaction VA01 and then we do Billing for this Sales Order through VF01. After billng is done, FICA document automatically gets generated.
We have following requirement to be fulfilled.
For the SD bills posted as above, I want to calculate due date of these bills based on Business Days for FICA document generated (SAP Standard calculate due date based on Calander days). We can use factory calander for calculating business days in relevant function module.
I have checked in the system and it seems that event 1330 ( FM - ISU_DUE_DATE_DETERMINE) is not working in this scenario. Is there any other FM which I can use?
Can anyone help me on this?
Regards,
Pradeep

Hello Praeva ,
The event 1330 has a sample FM FKK_SAMPLE_1330. It doesnt even have a Standard Function Module.
You need to create a Installation-Specific FM and put your code to determine the Due Date based on the logic.
Rgds
Ram Kumar.

Query taking long time for EXTRACTING the data more than 24 hours

Hi ,
Query taking long time for EXTRACTING the data more than 24 hours please find the query and explain plan details below even indexes avilable on table's goe's to FULL TABLE SCAN. please suggest me.......
SQL> explain plan for select a.account_id,round(a.account_balance,2) account_balance,
2 nvl(ah.invoice_id,ah.adjustment_id) transaction_id,
to_char(ah.effective_start_date,'DD-MON-YYYY') transaction_date,
to_char(nvl(i.payment_due_date,
to_date('30-12-9999','dd-mm-yyyy')),'DD-MON-YYYY')
due_date, ah.current_balance-ah.previous_balance amount,
decode(ah.invoice_id,null,'A','I') transaction_type
3 4 5 6 7 8 from account a,account_history ah,invoice i_+
where a.account_id=ah.account_id
and a.account_type_id=1000002
and round(a.account_balance,2) > 0
and (ah.invoice_id is not null or ah.adjustment_id is not null)
and ah.CURRENT_BALANCE > ah.previous_balance
and ah.invoice_id=i.invoice_id(+)
AND a.account_balance > 0
order by a.account_id,ah.effective_start_date desc; 9 10 11 12 13 14 15 16
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 544K| 30M| | 693K (20)|
| 1 | SORT ORDER BY | | 544K| 30M| 75M| 693K (20)|
|* 2 | HASH JOIN | | 544K| 30M| | 689K (20)|
|* 3 | TABLE ACCESS FULL | ACCOUNT | 20080 | 294K| | 6220 (18)|
|* 4 | HASH JOIN OUTER | | 131M| 5532M| 5155M| 678K (20)|
|* 5 | TABLE ACCESS FULL| ACCOUNT_HISTORY | 131M| 3646M| | 197K (25)|
| 6 | TABLE ACCESS FULL| INVOICE | 262M| 3758M| | 306K (18)|
Predicate Information (identified by operation id):
2 - access("A"."ACCOUNT_ID"="AH"."ACCOUNT_ID")
3 - filter("A"."ACCOUNT_TYPE_ID"=1000002 AND "A"."ACCOUNT_BALANCE">0 AND
ROUND("A"."ACCOUNT_BALANCE",2)>0)
4 - access("AH"."INVOICE_ID"="I"."INVOICE_ID"(+))
5 - filter("AH"."CURRENT_BALANCE">"AH"."PREVIOUS_BALANCE" AND ("AH"."INVOICE_ID"
IS NOT NULL OR "AH"."ADJUSTMENT_ID" IS NOT NULL))
22 rows selected.
Index Details:+_
SQL> select INDEX_OWNER,INDEX_NAME,COLUMN_NAME,TABLE_NAME from dba_ind_columns where
2 table_name in ('INVOICE','ACCOUNT','ACCOUNT_HISTORY') order by 4;
INDEX_OWNER INDEX_NAME COLUMN_NAME TABLE_NAME
OPS$SVM_SRV4 P_ACCOUNT ACCOUNT_ID ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT_NAME ACCOUNT_NAME ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT CUSTOMER_NODE_ID ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT ACCOUNT_TYPE_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_ACCOUNT_TYPE ACCOUNT_TYPE_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_INVOICE INVOICE_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_PREVIOUS_INVOICE PREVIOUS_INVOICE_ID ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT_NAME_ID ACCOUNT_NAME ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT_NAME_ID ACCOUNT_ID ACCOUNT
OPS$SVM_SRV4 I_LAST_MODIFIED_ACCOUNT LAST_MODIFIED ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_INVOICE_ACCOUNT INVOICE_ACCOUNT_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ACCOUNT ACCOUNT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ACCOUNT SEQNR ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_INVOICE INVOICE_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ADINV INVOICE_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA CURRENT_BALANCE ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA INVOICE_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA ADJUSTMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA ACCOUNT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_LMOD LAST_MODIFIED ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ADINV ADJUSTMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_PAYMENT PAYMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ADJUSTMENT ADJUSTMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_APPLIED_DT APPLIED_DATE ACCOUNT_HISTORY
OPS$SVM_SRV4 P_INVOICE INVOICE_ID INVOICE
OPS$SVM_SRV4 U_INVOICE CUSTOMER_INVOICE_STR INVOICE
OPS$SVM_SRV4 I_LAST_MODIFIED_INVOICE LAST_MODIFIED INVOICE
OPS$SVM_SRV4 U_INVOICE_ACCOUNT ACCOUNT_ID INVOICE
OPS$SVM_SRV4 U_INVOICE_ACCOUNT BILL_RUN_ID INVOICE
OPS$SVM_SRV4 I_INVOICE_BILL_RUN BILL_RUN_ID INVOICE
OPS$SVM_SRV4 I_INVOICE_INVOICE_TYPE INVOICE_TYPE_ID INVOICE
OPS$SVM_SRV4 I_INVOICE_CUSTOMER_NODE CUSTOMER_NODE_ID INVOICE
32 rows selected.
Regards,
Bathula
Oracle-DBA

I have some suggestions. But first, you realize that you have some redundant indexes, right? You have an index on account(account_name) and also account(account_name, account_id), and also account_history(invoice_id) and account_history(invoice_id, adjustment_id). No matter, I will suggest some new composite indexes.
Also, you do not need two lines for these conditions:
and round(a.account_balance, 2) > 0
AND a.account_balance > 0
You can just use: and a.account_balance >= 0.005
So the formatted query isselect a.account_id,
       round(a.account_balance, 2) account_balance,
       nvl(ah.invoice_id, ah.adjustment_id) transaction_id,
       to_char(ah.effective_start_date, 'DD-MON-YYYY') transaction_date,
       to_char(nvl(i.payment_due_date, to_date('30-12-9999', 'dd-mm-yyyy')),
               'DD-MON-YYYY') due_date,
       ah.current_balance - ah.previous_balance amount,
       decode(ah.invoice_id, null, 'A', 'I') transaction_type
from account a, account_history ah, invoice i
where a.account_id = ah.account_id
   and a.account_type_id = 1000002
   and (ah.invoice_id is not null or ah.adjustment_id is not null)
   and ah.CURRENT_BALANCE > ah.previous_balance
   and ah.invoice_id = i.invoice_id(+)
   AND a.account_balance >= .005
order by a.account_id, ah.effective_start_date desc;You will probably want to select:
1. From ACCOUNT first (your smaller table), for which you supply a literal on account_type_id. That should limit the accounts retrieved from ACCOUNT_HISTORY
2. From ACCOUNT_HISTORY. We want to limit the records as much as possible on this table because of the outer join.
3. INVOICE we want to access last because it seems to be least restricted, it is the biggest, and it has the outer join condition so it will manufacture rows to match as many rows as come back from account_history.
Try the query above after creating the following composite indexes. The order of the columns is important:create index account_composite_i on account(account_type_id, account_balance, account_id);
create index acct_history_comp_i on account_history(account_id, invoice_id, adjustment_id, current_balance, previous_balance, effective_start_date);
create index invoice_composite_i on invoice(invoice_id, payment_due_date);All the columns used in the where clause will be indexed, in a logical order suited to the needs of the query. Plus each selected column is indexed as well so that we should not need to touch the tables at all to satisfy the query.
Try the query after creating these indexes.
A final suggestion is to try larger sort and hash area sizes and a manual workarea policy.alter session set workarea_size_policy = manual;
alter session set sort_area_size = 2147483647;
alter session set hash_area_size = 2147483647;

How do u save datas more than one table using net beans ide using JSF

Hi,
I am new to JSF.
I save / delete / update / New master table using POJO (Plain Old Java Objects), database - oracle and Toplink Persistence Unit.
How do u save data more than one table using net beans ide using JSF (I am using POJO) ?
and also Tell me the reference book for JSF.
Thanks in advance.
regards,
N.P.Siva

SivaNellai wrote:
I am new to JSF.
So, I am using net beans IDE 6.1 from sun microsystem. It is a free software.No, you don't drag'n'drop if you're new to JSF. Switch to source code mode. Write code manually, with the help of IDE for the speed up.
So, please guide me the reference books, articles. I need the basic understanding of JSF, net beans IDE.[JSF: The Complete Reference|http://www.amazon.com/JavaServer-Faces-Complete-Reference/dp/0072262400] is a good book. The [JSF specification document|http://jcp.org/aboutJava/communityprocess/final/jsr252/index.html] is also a good reading to understand what JSF is and how it works. There are also javadocs and tlddocs of Sun JSF Mojarra.

Due date falls on 80 days from base line date ........but end of that month

Hi All
Can any one please guide me in creating a payment term
The Base Line Date would be 80 days from Posting date ........... But end of that month
Example
Posting date 01.01.2009 so the base line date would be on 21st March
01.01 ;          31.01 ;                            31 Days
01.02 ;          28.02 ;                            28 Days
01.03 ;          21.03 ;                            21 Days               80 Days
But due date should fall on end of that month 31st of march
So irrespective of any day calculated as above in that month it will always take the baseline date as last day of the month
Its Picking up the posting day as Baseline date from Transaction VA01 -> Additional data tab -> ETD ( Festinated Time of Departure)
From this date it need to calculate the due date as above ( 80 day but last day of the month)
Please Guide
Many thanks in advance
Aadi

Hi Aditya,
You may have to create 2 payment terms using the day limit option to meet this requirement.
Follows the below steps -
T-code OBB8
Term 1
Payment terms = xxxx (as you wish)
Day limit = any number between 10-15 (you may fix an appropriate date as you think fit for your business)
Default for baseline date = Posting date
Payment terms/fixed date = 31
Payment terms/additional months = 2
Term 2
Payment terms = same name as above
Day limit = 31
Default for baseline date = Posting date
Payment terms/fixed date = 31
Payment terms/additional months = 3
Logic here is... for all invoices with posting date on or before 10th-15th of a month, 80th day will fall definitely on the 2nd month. Invoices with posting date after 15th, the 80th day will fall on the 3rd month.
You have to take a concious decision on the day limit number. Because 80 days will not exactly work for all the months.
Regards,
Mike

How to transfer data more than 255 char from excel sheet to internal table.

Hello Experts,
I have a requirement where i have a text field in the excel sheet of more than 255 char and need to be updated in the text element. To do that i need to transfer the excel sheet data to an internal table where one of the field is more than 255 char.
in the standard function module it works only upto 255 char. Can you help me if we have some other way to get more than 255 char in the internal table from excel sheet.
Thanks in Advance.
BR,
RaJ.

Using .xls, it is not possible transfer data more than 255 characters from excel sheet. However if the excel sheet is saved as Comma Delimited format or Tab Delimited format, then using GUI_DOWNLOAD function module data more than 255 characters can be transferred.
File name should be : .csv (Comma Delimited format) or .txt (Tab Delimited format)
File Type would still remain 'ASC' while calling function module GUI_DOWNLOAD
Also In the internal table declare the field type as String or LCHAR.
Eg:
TYPES: begin of ty_file,
        col_a TYPE string,
      end of ty_file.
DATA: i_file type standard table
               of ty_file
             with header line
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\test.csv'
TABLES
    DATA_TAB                      = i_file

Billing document containing more than 999+ lines

HI experts,
If we have to post a billing document containing more than 999+ lines, what would be the configuration in SD so that the billing document can be divided in two documents and reconciliation can happen at later.
rewards ensured
Monti

Dear monti
You can do so. Follow the IMG Path --> SD --> Billing -> Billing Docs -> Country specific features --> Maintain maximum number of Billing items.
Here whatever numeric value you assign to sales organization, all your invoices be restricted to that value. Supposing, if you give 10 there, all your invoices will have ONLY 10 line items and if the delivery has more than that, there will be an invoice split.
Thanks
G. Lakshmipathi

Searching for exchange messages more than 30 days old

How do I search for email messages on my exchange server more than 30 days old. iPhone allows this.

Hey amazingclick,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Are you setup with ActiveSync with Exchange or BlackBerry Enterprise Server 10 with Exchange?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Ical crashes when I go to a date more than one month forward.

ical crashes when I go to a date more than one month forward.

The extension called Stop Autoplay isn't available from AMO any longer, it was probably pulled by the original author. <br />
http://kb.mozillazine.org/Muting_browser
It looks like it is available here: <br />
http://mac.softpedia.com/progDownload/Stop-Autoplay-Download-31767.html

Clear the line items more than 999 through F-28

Hi,
I have one issue,
senario is like below:
Step1:
F110 - Create the payment order for customer. if customer have more than 999 line items also payment order is updating
Step2:
Clear the invoices with referece to Payment order in F-28
here while clearing the customer line items using payment order referece if line items is more than 999 for customer it is not allowing to clear. error message is line items more than 999.
I have checked with tecnical people can we split the clearing if more than 999 line items. as per them is if it is not referece to payment order it is possible to write some code based on document type or posting date they can split.
here it is not possible. I tried with summrizaiton senario as specified in sap notes if line items more than 999. it is not also working.
i have one more question also while running f110 can we restrect the payment order to geneare upto 999 line items if it exceeds it should create other payment order of remaing line items so on.. is it possible?
can any body give a light to resove this issue.
BR:
Venkat.Gurram

Hi,
I have already checked that link .
I have implemented the note: 36353 for summrizaiton.
for payment order we can't do sumarization due to we can't the payment order while cleargin.
give me some other idea
BR:
Venkat.Gurram

Block invoices of clients that have more than 60 days of debt

Hello everyone!
I Hope someone here could help me with something.
Is there any way to configure SAP BO to block the invoice of those clients that have one or more invoices with more than 60 days of debt (Invoices over 60 days past due balance)??
I have SAP Business One 9.0 PL5.
Is someone can help me please let me know!!
Sorry for my bad english :s and sorry for posting this here, it is my first quetion and I really don't know where to post it (a little kind of confusing).
Best regards to everyone!

The tricky part with this is that Move-Item won't create missing folders, which you need if you want to maintain the folder structure, so you'll need to create those manually. This should do what you need.
# Change the value $oldTime in order to set a limit for files to be copy.
$oldTime = [int]60 # 60 days
foreach ($path in Get-Content "G:\Scripts\MoveDownloadDireFiles\pathListTest.txt")
# Write information of what it is about to do
Write-Host "Trying to copy files older than $oldTime days, in the folder $path" -ForegroundColor Green
# copy old files to another folder
$MoveFiles=Get-ChildItem $path -Recurse -Include *.* | WHERE {($_.CreationTime -le $(Get-Date).AddDays(-$oldTime))}
foreach ($movefile in $MoveFiles)
# Find the folder path of the file and remove the drive letter
$SourceSubFolder=$movefile.DirectoryName.substring(3)
# Set destination as base path + the folder path of the file
$DestinationPath="G:\BackupDownloadFolders\" + $SourceSubFolder
# Test for the destination existance and create if missing, as Move-Item doesn't create folders
if(!(Test-Path $DestinationPath))
New-Item -Path $DestinationPath -ItemType Directory
Move-Item -path $movefile -Destination $destinationpath

Mayday, maday !!! could someone teach me how to run my passport more than one day

I just got my passport yesterday ,could someone teach me how to run my passport more than one day.
please see the picture, I just received some calls and surf the internet less than 1h today.
thank you a lot.

press both volume keys down for 30 seconds and see if it persists after
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

F110 - Bill of exchange - latest due date more than 999 days ?

Similar Messages

Maybe you are looking for