F110 - Sending CC & Paying CC

Hi Guys,
While carrying out F110 payments from one company code to the other, initially I have made the settings in FBZP for sending CC and Paying CC.
In F110 while entering the parameters, under Company code, I am giving ABCD,XYZ1.
I want ABCD to be the paying co.code and I want the vendor in XYZ1 to be paid.
However the system is picking all the invoices from company code ABCD and XYZ1 for a particular vendor. Is this because the vendor exists in both co. codes? How can i restrict so that the payments for the company code XYZ1 only be paid though the vendor exists in both company codes?
If anyone has used such scenarios, please let me know.
Thanks,
Srikanth.

Hi Srikanth,
Try this senario
Give the parameters for sending company code ABCD and create proposal
Next go to Printout/Data medium tab there give the variant and select Maintain Variants button
There you can give the which is sending and paying company codes.
As per that system will pay the vendors.
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Surya

Similar Messages

F110: how to pay an invoice with Withholding Tax and a credit memo?

Hi All,
in my SAP I've defined a Withholding Tax type for Payment Posting.
I've posted a vendor invoice with with Withholding Tax.
Later I've posted a credit memo with Withholding Tax which must compensate the prevuois invoice.
When I launch t.code F110, SAP, in the right manner, proposes to pay the invoice less the amount of the credit memo.
But the calculation of the Withholding Tax (that it should post al the payment time) is wrong: SAP proposes to post the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the invoice. Instead, from it, SAP should detract the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the credit memo.
Why does SAP doesn't consider the amount of the Withholding Tax of the credit memo?
Could anyone help me?
Thanks

Dear Rossi,
if You defined the WT TYPE at the payment time this means that the WT amount will be calculated at posted during the F110 run as per the invoice as per the credit memo.
If they are the same amounts and refer to the same wt type and code, when You run F110, they should match even for the WT calculation. It is clear that if You inserted manually the WT base amount or the WT amount into the invoice, the system will not do any automatic calculation but it will use these amounts that can be different from the one auto matically calculated by the system for the credit memo.
I hope this can help You.
Mauri

F110 - Send email to Vendors

Hi Guys,
I need to send an email to the vendors after carrying out the payment in F110.
Please let us know how this is possible/ what are the configurations needed for this.
Thanks,
Srik.

Hi Srikanth,
To get the required functionality, you need to do the following :
Copy the module SAMPLE_PROCESS_00002040 to obtain the correct interface (transaction SE37),
and adjust the source code of the module individually. The email destination address is set in the module and the transfer type is defined with the field C_FINNA-NACHA (1 = print, 2 = fax, I = email). The module is run for each payment advice note to be sent.
Register it for the event (BTE) 2040 in transaction FIBF, under the process modules of a customer without country or application indicator.
I hope this information will be useful for you.
Thank you.
Suresh Jayanthi.

F110 - Sending mail to factor (Vendor)

Hi all,
During the payment campaign (F110) I want that Vendor and factor (associated to the previous vendor) receive an email with letters.
Vendor and factor have email adress on view communication (master data) but only when I go to SOST only the Vendor received email (I do not know if a letter was attached to this email). Then in both cases definitions are sames...
How can we customize this?
Thanks for your help!
David

Check this thread.. email payment advice notes
also check following notes..
1033893
1296960
836169
When you will copy the standard function module you will have a choice to write your own ABAP code which to make system send email advice to factor..
Regards,
Sayujya

F110 & SEND E-MAIL

HI , thanks for the future help , i'm trying to send a payment notification in Tx F110 , but all the stuff is inthe web is not clear , i hope is not a problem but i really need something step by step to do this , thnaks .

Hi
The standard fm OPEN_FORM can create a mail instead of the spool, so u need to apply all modification in order to process a mail.
Perhap the version of your standard program can do it, else u should a code like this:
XPROGRAMM = SY-REPID.
CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
               EXPORTING
                    STRATEGY           = 'CS01'
                    ADDRESS_NUMBER     = KNA1-ADRNR
               IMPORTING
                    COMM_TYPE          = LVS_COMM_TYPE
                    COMM_VALUES        = LVS_COMM_VALUES
               EXCEPTIONS
                    ADDRESS_NOT_EXIST = 1
                    PERSON_NOT_EXIST   = 2
                    NO_COMM_TYPE_FOUND = 3
                    INTERNAL_ERROR     = 4
                    PARAMETER_ERROR    = 5
                    OTHERS             = 6.
          IF SY-SUBRC <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
          CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
               EXPORTING
                    PI_COMM_TYPE              = LVS_COMM_TYPE
                    PI_COMM_VALUES            = LVS_COMM_VALUES
                    PI_COUNTRY                = KNA1-LAND1
                    PI_REPID                  = XPROGRAMM
               IMPORTING
                    PE_ITCPO                  = ITCPO
                    PE_DEVICE                 = XDEVICE
                    PE_MAIL_RECIPIENT         = LVS_RECIPIENT
                    PE_MAIL_SENDER            = LVS_SENDER
               EXCEPTIONS
                    COMM_TYPE_NOT_SUPPORTED   = 1
                    RECIPIENT_CREATION_FAILED = 2
                    SENDER_CREATION_FAILED    = 3
                    OTHERS                    = 4.
          IF SY-SUBRC <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF..
Max

How to send the PAYE EDI files - P45(1) P45(3) P46 to HMRC

Hi,
How do we send the EDI files like P45(1), P45(3), P46 etc.. to HMRC.
Oracle Payroll generates the files, but doesn't support transmission to HMRC.
Can these files be directly uploaded on the HMRC website ?
Are there any recommended third-party softwares for the same ?
Appreciate any inputs.
Thanks,
Vigneswar

Thanks Avinash.
I see some Third-party softwares here :
http://www.hmrc.gov.uk/ebu/edi/edi-software.htm#P37_1596
Are there any free ones ?
Any idea how much does the licensing for EigarPay cost ?
Thanks,
Vigneswar

F110 to send Statement to Customers

Hi SAP experts,
I have run F110 to pay customers who should receive e_mails automatically informing about the processing.
where can I view if the e_mail was sent automatically ? I have typed my e_mail to test and I have not received anything.
where is the setting that determines F110 to pick the customer´s e_mail to be used?
Any help is welcome
Regards
Roger

Roger,
This needs a bit of customization depending on the form etc.
You can use a BTE for this.
Follow the conversation on this thread here:
F110 & SEND E-MAIL
Most of your queries will be solved on this thread.
Thanks
Edited by: Shreekar Ranade on Dec 17, 2009 11:08 AM

A/P F110 Payment via company code in a different country

The client is a service organization where the Vendor data is managed in the US company code (US01) and the Customer data in managed in a Swiss company code (CH02). Many of the customers could also provide services and the invoices are posted to vendor accounts in the US01 company code.
In the case where the vendor amount exceeds the customer amount, the customer/vendor has agreed that the client will pay the net amount and clear the net to the customer account.
Clearing between the customer and vendor in company codes in the same country and with the bank account managed in the same country works as expected.
The CH02 company code does not have a bank account of its own and therefore cannot make its own payments.
The problem that we encounter is that I cannot define (for F110 configuration) sending and paying company codes where the country assigned are different, e.g.;
- Sending company code: CH02
- Paying Company code: US01
When this is entered into the IMG configuration for "Automatic payments > Set Up All Company Codes for Payment Transactions" the error "Company code US90 is not permitted as the paying company code" (error code F3063) is issued. The detailed error description is:
"The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes."
The initial design was to have the A/P and A/R in the CH02 company code but the payment via the US01 company code would not work. Having the vendor only in the US01 company code is a solution to this using an inter-company invoice posting. Using a work-around to clear the customer balance to the vendor account is not acceptable to the client.
The easy way out of this is to assign the CH02 company code to country code 'US', but this is not correct.
Is there a solution to making payments from company code US01 (as the paying company code) but including the customer items from a foreign company in the payment?

Hi Martin,
Welcome SDN!!!
The standard SAP doesnot provide payment via company code in a different country.If you still feel that it is fit case,please contact SAP.SAP may consider this a special requirement and may cover your case under SAP Note 357732.(pls have a look once).
Thanks
Aravind

In F110 -Customer as a Vendor invoice clear and make payment

Dear all ,
Can we make payment through in F110.
WE maintain Customer as a vendor and Vendor as customer,While running automatic program system
showing error massage"No pymt possible because items with a debit bal"
But over all amount is credit ,But only customer invoice showing like this.
Could you tel me that ,Is there any setting ,Wt setting we have to configured .How to solve this issue
Thanks in advance
Regards
Girish.

Dear all,
Kindly suggest me how to do this.
we have maintained customer as a vendor in different company code
one company code xxxx here we maintained as a customer ,In this
customer master data we maintained vendor no and clearing with vendor we have selected.
In next company code yyyy here we maintained vendor as customer ,here we maintained customer no and selected clearing with vendor.and payment method .
In xxxx company code customer as a vendor balance is 1000.
In another company code yyyy here vendor as customer balance is 15000,
paying company code is yyyy.
while running F110 system asking paying company code and sending companycode,we are entering two times.first time yyyy and second time xxxx.
that time showing error"No pymt possible because items with a debit balance"
Then we edit proposal its working fine ,But its not clear against vendor
invoice
system taking full vendor invoice amount(15000) as a out going payment
and 1000 is incoming payment.
But we want pay only difference amount of the invoice.
For this what we need to do in the system please guide
thanks in advance
Thanks and Regards
Girish

Open Items run (F110 payment proposal)

Hi All,
Can someone please help me with a problem that I am facing when running F110.
We pay our vendors through F110 but also we have customers who we need to issue dividend equity check and their loan payout's. So when I do FB75 and create a credit note for customer and than I go FBL5N I see it there with other open invoices. Than I go to F110 and do a payment run and it creates a check for the difference. I don't want that to happen, I want the check issued for the credit amount that I posted in FB75. Is there any way I can print checks for the credit memos only and not mess with the customer open invoices. Please help if you know how to fix this problem. Thank you in advance for your help.
Happy Holidays!
Monika

You have a couple of options (select whichever is possible for your current system config):
First, you can specify different payment methods in cust. invoices and cust. credit memos. Then, in F110, specify only the cust. credit memo payment method, and the system should pick up only the credit memos.
Secondly, if the payment methods can't be different for both the document types, and if there are not too many invoices open, you can block all the open invoices. This way, F110 will not process the invoices with the credit memos.
Thirdly, there is a checkbox in the cust. master data (Company Code Data - Payment transactions) named "Single payment". Place your cursor on it, and hit <F1>. SAP says that "If this indicator is set, every customer/vendor open item is paid separately during automatic payment transactions. This means that open items are not grouped together for payment."
Fourthly, you can define Payment Groupings (T.Code OBAP).
IMG path Fin. Acctg. --> AR and AP --> Buss. Trans. --> Outgoing Payments --> Autom. Outgoing Payments --> Payment Method / Bank Selection for Payment Prog. --> Define Payment Groupings.
You can then specify these groupings in the cust. master screen (Company Code Data - Payment transactions) using field "Grouping Key".
Remember to assign points if found useful.
Regards,
Gulshan

No SMS send or receive ability after updating 3GS to ios5

Synced up my husband's iPhone 3Gs this past Sunday night for the first time ever to update it from ios 4.1 to ios 5. Since then, he has been unable to send or receive ANY text messages. I tried a backup and restore last night and was able to get ONE imessage to go through to my own phone, but that's it. During the process Sunday night, he also signed up for a new iTunes account (we usually use the same one). Would this have anything to do with it? I've tried restoring Network Settings. Any help would be much appreciated.

Hi.
So he can't send regular Pay-Text or iMessage ? Or is it only iMessage that wont do ?
With his new Apple ID, make sure to activate it under the iMessage settings and to enter his phone number.
Remember that only other iPhones with iMessage acvitated will receive texts as iMessage.
If there's still a problem, try to turn off the iPhone and back on.
Hope this was helpful.

For APP (F110) Authorisation to be restricted by vendor account group

Hi,
My requirement is to restrict the users to post the automatic payment program by vendor account group.
Can anybody tell me the authorisation object name which can be restricted in rolls.
Regards
K Khatri

Hi Ken,
unfortunately no solutions found.
Here is a reminder of the "business case"
Within our company code we have different regional divisions with their individual A/P and Treasury departments running their F110 payment runs to pay "their" invoices. In our model this "regional division" is depicted as an SAP Business Area (GSBER).
Internal Controllers and auditors argue that one Business Areas should not be authorized to run one anothers F110 to avoid paying one another's invoices. That's wehre the idea of using L_LFA1_GRP came about.
regards,
Luis

F110 Grouping all vendors on one payment

Hello all,
I am trying to make a payment via F110 that's pays 3 vendors invoices from the same company code, same house bank, same Payment method.
Now as F110 works, but making 3 payment documents, one document for each vendor :
Doc 1
Debit Vendor 1
Credit Bank account
Doc 2
Debit Vendor 2
Credit Bank account
Doc 3
Debit Vendor 3
Credit Bank account
Is there a way to get a unique posting like :
Doc expected
Debit Vendor 1
Debit Vendor 2
Debit Vendor 3
Credit Bank account
Thank you all

Hi ,.
Please create a Group key and assign in vendor master . Now create Payment run on the Basis of that group Key in additonal selection .

I was using Adobe Send Now for the longest time to send files; there was never a charge for it. Now, does Adobe Send replace Adobe Send Now and is there a charge or fee for Adobe Send? I can't get it towork! Paul Madsen

Does Adobe Send replace Adobe Send Now and if so, is it only available on a subscription (fee) basis? Adobe Send Now was free; I was never charged for the service.

Dear Sir or Madam at Adobe:
Does "Adobe Send" replace "Adobe Send Now" and if so, is there a charge for it? I was never charged for using Adobe Send Now. I cannot get Adobe Send to work for me; I can upload the file from my computer but when I click the box to send a "personalized link" a message box drops down asking me to upgrade. When I say no thanks, the message disappears but the box click does nothing. Do I have to subscribe to Adobe Send and pay a monthly fee for it before I can use it? Please explain what change has been made and what is going on with this program/service. Thank you. Paul Madsen 763-781-9118 [email protected]

Can i send a small amount of money without link a credit card `?

i living in germany , i want to buy an App for my smart tv , it costs 5 euro , so when i press donate on the App official page and logging in my Paypal account , it said that i should link a credit card , i try send money > pay for goods or service , and it ask me for link a credit card again , so please help me ..

To use funds in your PayPal account balance PayPal want you to have a backup card linked as well. ***************************************** I give up my time to help you so a thank you or kudos would be cool. Marking one of my replies as a solution would be appreciated if I sorted your problem.

F110 - Sending CC & Paying CC

Similar Messages

Maybe you are looking for