F4_FILENAME not solving my requirement

Hi All,
I tried with all these but the file name which I want to get is more than 128 chars.
KD_GET_FILENAME_ON_F4
WS_FILENAME_GET
cl_gui_frontend_services=>file_open_dialog
F4_FILENAME.
Please help me with any FM which can get filename more than 128chars
Thanks,
Srik

cl_gui_frontend_services=>file_open_dialog is corect one it can hold up to 1024 chars
DATA: file_tab type FILETABLE WITH HEADER LINE.
DATA: ret_code TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
CHANGING
file_table = file_tab[]
rc = ret_code.
IF ret_code NE 0.
READ TABLE file_tab INDEX 1.
WRITE: file_tab-filename. "here 1024 chars are allowed
ENDIF.
Regards
Marcin

Similar Messages

Im trying to install a new application on my mac but it keeps on coming up with 'The volume of this disk does not meet the requirements for this update' any ideas how to solve this?

I have recently fully updated my mac to 10.8.2 and i am trying to install a small facebook application but every time i come to chose the disk it says ' OS X facebook developer preview can not be installed on this disk. This volume of this disk does not meet the requirements for this update' any ideas on how to get round this?
thanks

That may be the new Mountain Lion "sandbox" protective software kicking in, possibly, because ML "thinks" that App doesn't meet ML's new strict security requirements. A common phenomena. If you feel the 3rd party App is really OK, you can override this feature and install the new App by holding down the Command key when you click to install the new App. That's one possibility for the error message appearing. If not, another possibility is that that Developer Preview software package requires some previous piece of software be installed prior to downloading this Preview. You would have to check the Facebbok websiste's Developer Forums for help if this is the case.
Hope this helps

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

The Game Center app is pre installed and cannot be removed from the device.
Best thing to do is move it to the last available screen.
Hold down the Game Center app until all the apps jiggle then sliide the Game Center app to the right from one screen to the next. This requires a bit of finesse, but it's doable.
Press the Home button one time to stop the apps from jiggling.
For the Apple ID issue, try resetting.
Tap Settings > General > Reset > Reset All Settings
Then try your Apple ID and password for the Game Center app.

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

[Solved] ping requires root privilages but only if OS run from RAM

I have an odd situation where I can use ping as a regular user from openbox's autostart if I run the OS from storage disks but not if I load the OS into RAM. It only works for a regular user with the OS loaded to RAM when I set the sticky bit.
Can this be a timing problem with systemd not activating a required service in time?
Last edited by KairiTech (2014-08-26 21:16:45)

Yep! That's it exactly. I create a root file system archive to speed the loading into RAM. See the exact code below:
sudo tar -vzcf /rootfs.tar.gz / --exclude={/rootfs.tar.gz,/boot/*,/var/cache/pacman/pkg/*,/dev/*,/proc/*,/sys/*,/tmp/*,/run/*,/mnt/*,/media/*,/lost+found}
Adding the --xattrs option to tar solved it.
Last edited by KairiTech (2014-08-26 21:17:46)

Does anyone know what to do after the IOS 5 update when it wont sync your music or apps or even register with itunes saying device is not connected/ the required file is not found?

My iphone after the update to IOS 5 (which i had problems updating first anyway) wont even register with itunes saying its still half way through a restore when its not i have already restored it 4 times but still wont sync music or apps or finish restoring my phone because it always comes up device is not connected or the required file is not found?
Any ideas?? ive gone the 02 shop and they just said to keep trying to restore it but its really not solving anything.

Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS

ITunes 11.2.1 does not solve unsync problem

Just did update iTunes 11.2.1 but it can not solve the problem. My macbook pro can not sync to iPad Air, iPad 2, iPhone 4. Pls help me. What should I do? Do I have to wait another updates from apple? Thanks

"This movie requires QuickTime, which is not supported by this version of iTunes" - https://discussions.apple.com/thread/3832288 - switch iTunes to 32 bit mode.
Another solution involving deleting files and re-adding them - https://discussions.apple.com/message/20074664

Bios update failed : does not meet system requirements code 9994/9996

bios update failed : does not meet system requirements code 9994/9996 / Model ny801av-aba HP Pavilion p6100z cto Desktop windows vista basic current bios version 5.38, released 03/20/09. 4GB ram (3.5 useable) AMD semperon LE- 1300 socket am2+ code name sparta. M2N68-LA Motherboard BIOS update verision 5.49 released 08/24/09 (am trying to upgrade to a AMD phenom triple core 8400 2.1 gig that is why I am trying to update the bios, when I put it in I got nothing.)
This question was solved.
View Solution.

Figure 1: Error message
The error displays when ...
the update requires certain hardware or software that is not installed on your computer (examples: keyboard replaced with a non-HP keyboard or Microsoft .NET software is not installed),
the computer does not meet a certain minimum hardware or software requirement (examples: 4 GB minimum memory, 200 MB free disk space, or .NET version 2.0 required and 1.0 is installed) .
Usually, this error indicates the update is not needed for your computer and it should not be installed.

I have music stored and it wont let me transfer them over all i get is your apple id has been disabled, i have re set my pasword and this has not solved the problem

i had a iphone in 2010, i purchased music which is still stored on my original apple id, but when i try to transfer the music ,and download apps all it says is your apple id has been disabled, i have tried re setting a new pass word but this has not solved the problem can any one help please

Contact itunes support

Open Purchase Orders not considered as requirement for MRP Run

Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
Saravanan

Can you check to see if there is a re-order point set up for this materia? That could be causing the problem too.

Scheduling Agreement -Schedule line should not pass the requirement to MRP

Hi Friends!
As we all know the scheduling agreements is outline agreement with future schedule lines, with this system will pass the requirements to MRP for the schedule line which is even after 5 years, so my requirement is if the schedule line date is above 15 days from the current date then requirement should not pass to MRP.
solution which we gave is, SA initially will determine the schedule line category as CN (which will not transfer the requirement) and a batch job program will run daily and it will check for each schedule line if any of the schedule is with in the 15 days from the current date then it will change the schedule line category from CN to CP.
Now the problem is , by using Batch Job which program I have to call to change the schedule line category?????
1. we tried BAPI_SALESORDER_CHANGE but when we are changing the CN to CP it is not performing ATP where as if we do manually it is performing.
2. we tried BDC but here also we facing some strange problem i.e. while recording the ATP screen is not populating where it is coming while doing manual.
Can someone let me know which one program we should call in Batch job to do this change.
Regards
Nath

Hi nath,
i also failed in changing shedule line category in userexit and in BAPI.
in one case, i succeded in doing it with a bdc after MV45AFZZ / userexit_save just bevore the datas are reset but after the commit-work is processed.
the other possibility is, to change the accepted amount in userexit RV03VFZZ / USEREXIT_AVAILABILITY_OUT.
3. possibility is, to block the order with a delivery - block , same as the credit-control-block. This block can be set in MV45AFZZ or perhaps in BAPI too.
hans

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

TS3276 Web through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro, but no my iMac. Connection Doctor shows all green lights.

Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps.

HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. Could not complete backup to media share. The network backup disk does not support the required AFP feat

Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

F4_FILENAME not solving my requirement

Similar Messages

Maybe you are looking for