F4 help button not getting displayed

Hi,
I have unique problem it seems. I have atttached a explicit search help object for one of the fields in a local structure of type db table.. In standard selection screen i am defining a parameter of this field and have used "matchcode object" also to again specify the search help name. but on the selection screen when i press the f4 the search help comes but the button which shows that f4 help is provided does not come up..
Actually i have done my development in one system and button is shown up there.. later i transported it to a test system where the button does not show up...
Any answers will be very helpful
Thanks in advance.
Warm regards,
Naveen M

hi,
you can try the search help in this manner it will help you:
go to se11==> put some name after ticking search help radiobutton==> create==>
then tick " elementery search help " and press enter ===>then put description and table name in selection method ===>then put the field on which u want search help
in search help parameter==> tick IMP EXP ==> write 1 in lpos and spos===>save and activate===> double click on table name ===> select that field and press *search help tab* above===> then copy
regards
rahul

Similar Messages

Select row button not getting displayed in alv grid.

Hi ,
As per my requirement I am using tab strip in module pool.
Each tab strip is containing one ALV.
And user can change delete or create one record when the alv is displayed.
The same should be saved in the database and ALV should be refreshed.
When I am displaying the ALV the left most option of the ALV with which I can select the whole row is not coming.
Because of which I am unable to call the method to get the selected row and delete or change accordingly.
Why this button is not coming?
I am using set_table_for_first_display in my program.
Please help.

Hi,
In the method SET_TABLE_FOR_FIRST_DISPLAY, you will have to change the Selection Mode to 'A'. I guess you are not passing any values to the Layout parameters.
Once you do that, you will find what your are looking for.
Data : LA_LAYO type LVC_S_LAYO.
LS_LAYO_SEL_MODE = 'A'.
and pass this to the method's layout parameter.
Cheers,
SKC,

F4 search help is not getting displayed in WAD

Hi all,
For a certain InfoObject we want to add an attribute in the F4-search help. The additional attribute does appear when executing the query in the Bex Analyzer but not on the Web. Can anyone tell me how to achieve this in WAD?
Thanks in Advance

Hi all,
For a certain InfoObject we want to add an attribute in the F4-search help. The additional attribute does appear when executing the query in the Bex Analyzer but not on the Web. Can anyone tell me how to achieve this in WAD?
Thanks in Advance

Search Help not getting displayed

Hi ,
I have included my own Search Help ZSH to Standard Search Help MAT1 which is related to field MATNR , in the following path..
In MAT1->MAT1_A, I have INCLUDED my Search Help.
I have tested it in SE11, it's working fine.
But, in VA01 screen when I press F4 on the MATNR field only 9 Search Helps are displayed, and my Z-Search Help is not getting displayed.
What additional settings should I do for the display of my Z-Search Help?
Thanks in advance,
Shivaa...

Also look at this thread Search help enhancement - VA01
Regards,
Raymond

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

Error msg not getting displayed on first time button click in SRM UI

Hi,
I have created a custom message in an impl. of SRM BADI BBP_DOC_CHECK_BADI in which one message is getting populated correctly in debugging. Again, when I check PO, the message is getting displayed correctly, however when I click on order button for the first time, it is not getting displayed but on subsequent occassion, it is working fine. Just wonder, why this is not happening for first time. Any input ??
Regards,
Ni3

Hi Virender,
I found a note 1239499 close to my requirement but not valid for SRM release 5.0. Is it the same, you wish to referred or is there any other?
Regards,
Ni3

WRITE STATEMENT IS GETTING EXECUTED BUT NOT GETTING DISPLAYED

HII All,
i hv created a selection screen with push button. Now when i m clicking that pushbutton, output is not getting displayed..when i debug program ,control enters in switch case and also executes write statement but write statement is not getting displayed.. below is the code ..
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
       WA-EMP_NO = 123.
        WA-EMP_CO = 'A'.
        WA-EMP_N = 'APOORV'.
        APPEND WA TO IT_TAB.
AT SELECTION-SCREEN.
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
        APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
        WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
        LOOP AT IT_TAB1 INTO WA1.
        WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
        ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
          WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.
Plz help me..
Edited by: Julius Bussche on Jan 29, 2009 1:40 PM
Code tags added and please dont use Caps-Lock.

HI,
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
WA-EMP_NO = 123.
WA-EMP_CO = 'A'.
WA-EMP_N = 'APOORV'.
APPEND WA TO IT_TAB.
* AT SELECTION-SCREEN.                 "Comment this
START-OF_SELECTION.                     " Add this
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
LOOP AT IT_TAB1 INTO WA1.
WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.

Standard screen not getting displayed in a zcopied prg

Hi Freinds,
(In sap4.7 ) I had copied QA32 into a ZQA32 and had added some validation checks before user Chooses Defects Button,,this ZQA32 works till that point fine but when the Defects button is chosen,,it gives a call to Tcode QA11 ,with the initial screen fields filled up,,
in the normal processing of QA32 when QA11 is called,,it is also filled up with some intial values carried from previous Tcode QA32 and after User presses execute button in QA11 intial screen ,further a screen(200) with 3 radio buttons pops up,,
my ZAQ32 is failing at this point though the line of code where the screen is called (call screen 200 ...) is reached with no variations in values of any of the variables in comparison with when it is called from QA 32,
the screen 200 is not getting displayed if i reach QA11 thru ZQA32,,,
Though it is ALSO calling QA11 and hence the program control is tranferred to QA11, but still the screen is not geting displayed,plz tell me where i went wrong??
Thanks in advance

Hi Sri lakshmi ,
You should debug the code starting from call to QA11 and check if will the conditions are met for call of pop up screen.
This will give you an idea, as what is exactly required for this pop up to appear.
Hope this helps you.

ADOBE Interactive Form not getting displayed in Browse

Hi,
Currently I am working on EhP4 project on ECC 6.0 environment. For HCM, We have interactive ADOBE forms for MSS. While testing we found that all buttons are displayed in a browser (we are are window 7 IE 8 ) but interactive form is not getting displayed in the browser (Fill out Form as part of MSS). It only displays a line
Checked ADS configuration as per oss note and works ok. Did HTTPWATCH - browser is getting (GET) the Adobe forms with values but not displaying it. If I copy URL from HTTPWATCH GET line in a separate browser window it displays the form.
Thanks in advance your help.
Regards
Jitendra Pongurlekar

Hey Chris (and others),
We were having this same problem, and this Note fixed the issue (thanks!). However, we are still experiencing another issue with HCM Processes and Forms under EhP4. Before this Note, it took about ten minutes before "single line display" would show up. Now after the Note, we get the full form, but it still takes ten solid minutes of waiting before it appears in the window. We're pretty sure it's not a Portal issue, nor an ADS issue, but something with the web dynpros on the ABAP side. However, we have not yet been able to resolve it. Anyone else run into this performance problem with HCMP&F after upgrading to EhP4? We don't have the problem with EhP3.
Best regards,
Matt

Adobe Form NOT getting displayed in WebDynpro Modal Window (Pop Up)

Hi,
I am trying to display the table data in a Interactive Form. I have used TABLE UI element in Interactive Form. When the user clicks on a EXPORT button this form is displayed in a pop up window (Modal Window). This form is not getting displayed for most of the users. In some PC's it is getting displayed, strange is all their browser versions and OS versions are same.
Portal Version: NW04s SP8
NWDS Version : NW04s SP8
Adobe Live Designer: 7.1
Acrobat Reader: 7.0.8
I tried changing the display type (property of Interactive Form Element) to NATIVE, it is not working at all. If i change it to "activeX", then it works in some PC's.No logs are found in the server as well as in the client PC as well.
Please let me know if you have come across this problem, looking forward to your solution.
Thanks
Senthil

Hi,
It seems to be available only for ABAP version. I cant find it in the java version.. check this..
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/656442a1c4de54e10000000a155106/frameset.htm">Help SAP Link for Java Reference</a>
And even in ABAP , the pre-requisite seems to be installation of ACF,
The exact words
<i>
Adobe Reader (>= 7.0) and, if you are creating interactive forms, also the ActiveX Control Framework (ACF) installed on your computer. Also see SAP note 834573.</i>

'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

F4 help button not getting displayed

Similar Messages

Maybe you are looking for